Can't burn a DVD using IDVD nor Disk Utility- first time user-what is wrong

The recording device reported the media error: Power calibration area error. (0x73, 0x03.)
May 13, 2007 8:05pm PDT
IDVD Version 6.0.3
Emac- OS 10.3.9--- in the owner's manual it DOES state my emac can burn DVDs. Is this correct?
I keep getting this error message after about 20 minutes of programming the DVD-- then it ejects with this message:
"The recording device reported the media error: Power calibration area error. (0x73, 0x03.)"
When using the IDVD application to burn my slideshow onto a DVD; Then I contacted Apple Care and I was told to use Disk Utility to burn my DVD in lieu of IDVD not working.
I converted my slideshow into a .dmg format; all was verified successfully. Then I receive this error message when attempting to BURN DVD:
"STOP The device drained its buffer without burn under run protection"
I made a WONDERFUl slideshow-- of only 17 slides-- confirmed I have plenty of room on hard drive and et al on the "disk information". I have attempted since May 7th to get this DVD to burn my slideshow. PLEASE HELP ME!!! I have deadlines-- now it is for Tuesday May 15th. Please alert me to an alternative until I can get my Emac working properly on what I can do to make copies of my slideshow ASAP. Thank you.
Now I looked thru your ERROR message archives and found NONE to match mine. What do these error messages mean-- is my Emac not working? This is first time ever I tried to use IDVD and IMovie and Disk Utility--- so the first impression is VERY VERY VERY bad for Apple's "easy to use for first time customers"....

Well I had to make the copies for my presentation-- so the cheapest I could find in my area was Walgreens-- 39.99 for ONE COPY of a DVD! So I paid $70.00 and the clerk made 4 copies for me;-) So thanks Walgreens!
Now-- my Mac-- I could not find anything on shelves at Walgreens or Office Depot but the FujiFilm I already have... So I now have time to look elsewhere.
I did PRAM my Emac 3 times-- I tried these things also:
1)Saved the IDVD- .dmg format to QuickTime .mov
I uploaded to google video.com or whatever-- they use their own software-- .gvp file and player. All was successful (even now on YouTube-
2) I then made another version in PowerPoint and saved it as an MPEG
Also for below-- I lowered the burn rate upon the 2nd try to 1x-- took one hour or more (I went to get a root canal... then exfoliate... then I came back;-)
Also tried different .mov from the web-- a great whale shark video that was only 49mb. My presentation is 120 mb. So I was just thinking-- make it smaller; burn slower.
3)I did try to burn from IDVD, Disk Utility and then the drag and burn/click method on the desktop-- put a blank DVD in-- drag the .mov icon to the blank DVD -- write a title for the blank DVD- formats it / Drag to trash-- Burn icon comes up/ Clicked it-- waited 20 minutes and received:
"Error: Error occurred while burning the disc. This disc can not be used."
So I put in another blank Fuji DVD-- just in case. Same error message-- so I am hoping it is the DVD itself and not the SuperDrive.
4)Also-- I tried to do audio CD burn-- just to make sure about the drive-- all was successful and I did a back up of my Itunes files-- 6 CDs they burned (they meaning "the Gods of Mac OS" ;-0 My audio CDs are Office Depot CD-R 52X700mb/ So the generic is better for CDs on my Emac that I know;-)
So I will use my weekend to try other DVDs-- and I have the safety net of Apple Care-- but then just realized-- my Extended Care plan is OVER at May 30, 2007!!! I called to ask to EXTEND it further-- I'll pay whatever-- NOPE-- 3 years was max on this contract. So any repairs I have to pay for after May 30th-- ISN'T THAT JUST THE WAY THE WORLD GOES? The DAY after your warranty on AnYTHING-- the thing goes kablooey?
But I still have days left--- and I know of a good Mac Repair person in area-- but it is just so darn difficult to move my desktop Emac (I got the GLASS monitor to save $300 or something) Weight Lifting is what it is-- weighs about 45lbs or more.
But it seems it may be the media I am using if the CD burner is working, right?
I can update-- if you want me to email direct-- just give me a note (my email is listed). Thanks all!!! I just want to impress everyone of how tenacious I am to find that my Emac is FINE-- it is just ME that is warped;-)

Similar Messages

2Can't burn a DVD using IDVD nor Disk Utility first time user-what is wrong

T he recording device reported the media error: Power calibration area error. (0x73, 0x03.)
IDVD Version 6.0.3
Emac- OS 10.3.9--- in the owner's manual it DOES state my emac can burn DVDs. Is this correct?
I am using FujiFilm DVD-R . Never used the DVD apps or burner before. I PRAM'ed 3 times. Also did 6 CD audio burns to check the drive. Is it the media-- Fuji does not work? I used Office Depot generic for audio CD-Rs.
I keep getting this error message after about 20 minutes of programming the DVD-- then it ejects with this message:
"The recording device reported the media error: Power calibration area error. (0x73, 0x03.)"
When using the IDVD application to burn my slideshow onto a DVD; Then I contacted Apple Care and I was told to use Disk Utility to burn my DVD in lieu of IDVD not working.
I converted my slideshow into a .dmg format; all was verified successfully. Then I receive this error message when attempting to BURN DVD:
"STOP The device drained its buffer without burn under run protection"
I made a WONDERFUl slideshow-- of only 17 slides-- confirmed I have plenty of room on hard drive and et al on the "disk information". I have attempted since May 7th to get this DVD to burn my slideshow. PLEASE HELP ME!!! I have deadlines-- now it is for Tuesday May 15th. Please alert me to an alternative until I can get my Emac working properly on what I can do to make copies of my slideshow ASAP. Thank you.
Now I looked thru your ERROR message archives and found NONE to match mine. What do these error messages mean-- is my Emac not working? This is first time ever I tried to use IDVD and IMovie and Disk Utility--- so the first impression is VERY VERY VERY bad for Apple's "easy to use for first time customers"....
Oh to add information-- I DO have an external DVD recorder-- have yet to even see how to hook it up to my Emac-- if this is an alternative to meet my Tuesday deadline-- PLEASE let me know-- how do I burn a copy of my slideshow into an external DVD recorder?
My emac model: 1.25 GHz Power PC G4
Memory 256 MB DDR SDRAM
Machine Model: eMac
CPU Type: PowerPC G4 (1.1)
Number Of CPUs: 1
CPU Speed: 1.25 GHz
L2 Cache (per CPU): 512 KB
Memory: 256 MB
Bus Speed: 167 MHz
Boot ROM Version: 4.8.2f1
Serial Number: G84181KDQQJ

Also did 6 CD audio burns to check the drive. Is it the media-- Fuji does not work?
Your drive is actually TWO devices - one set of optics and laser burns/reads CDs, another set of optics/laser reads/wtites DVDs. The fact that your drive can burn CDs doesn't mean it is working for DVDs.
I keep getting this error message after about 20 minutes of programming the DVD-- then it ejects with this message:
"The recording device reported the media error: Power calibration area error. (0x73, 0x03.)"
When using the IDVD application to burn my slideshow onto a DVD; Then I contacted Apple Care and I was told to use Disk Utility to burn my DVD in lieu of IDVD not working.
You might want to get back to Applecare and expalin again the error messages you are seeing. They really don't involve iDVD.
I converted my slideshow into a .dmg format; all was verified successfully. Then I receive this error message when attempting to BURN DVD:
"STOP The device drained its buffer without burn under run protection"
You either have a media problem or you have a DVD burner problem.
F Shippey

I can't burn a dvd using any method, Idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when i click burn and enter the disk??? how do i repair my superdrive for imac

I can't burn a dvd using any method, idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when I click burn and enter the disk??? how do i repair my superdrive for imac, or how do I do whatever I need to do to get it working: I have already tried using a lens cleaning cd and also restored my nvram or something i forget what it was called but i restarted my computer holding down command+optoion+p+r and still nothing???
Free solutions are the best, although if I have to pay I will, I would prefer to not have to buy an external burner if possible and already know that is an option so please don't give me that answer... thank you for any help you can give

Unless your iMac is still covered by AppleCare, get an external DVD burner.
You can get perfectly good ones from Amazon for less than $40.

I am currently experiencing problems burning a DVD using iDVD. I have created a project in iMovie. I have shared it to media successfully however when I try to burn it I receive a messaging advising there is insufficient disk space on assets.

I have created a iMovie and wish to burn it to a DVD.
I successfully shared media to browser in preparation to burn to DVD using iDVD magic.
I am able to successfully preview however when I try to burn I receive a error indicating "Not enough disk space on assets"
I am currently using a Macbook Air
Version 10.6.8
Model Name:          MacBook Air
Model Identifier:          MacBookAir3,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          1.4 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          3 MB
Memory:          2 GB
Bus Speed:          800 MHz
Boot ROM Version:          MBA31.0061.B01
SMC Version (system):          1.67f10
Serial Number (system):          C02DRL8JDDQX
Hardware UUID:          53310599-83EA-5F58-99A9-AE505506BBFE
Capacity 60.32 GB
Available - 2.49 GB
The iMovie I am trying to burn is 45 mins long
Any suggestions would be greatly appreciated...

Reduce your burn speed to 1/2 the Rating of the Media.
Disc Burner
If more than one supported disc burner is connected to your computer, choose one from the menu.
Preferred Speed
When you burn a CD, iTunes automatically uses the best recording speed for the CD. However, if your blank CD is rated for a slower speed than the maximum speed of your drive, or if you experience problems creating CDs, you may want to change the recording speed to match the CD’s rating.
Disc Format
Choose the type of disc you want to burn: Audio CD; MP3 CD; or Data CD or DVD.
Gap Between Songs
Choose the amount of silence, if any, between songs.
Use Sound Check
To have all songs on the disc play at the same volume, select this option.
Include CD Text
To include information that CD players in some vehicles can display, select this option.

Does iDVD work with Maverick? This is the first time I tried to burn a DVD using iDVD after upgrading to Maverick. It seems to get stuck at encoding menu stage and not doing anything.

I tried to burn a DVD using iDVD after upgrading to Maverick, first time I tried after upgrading to Maverick a few weeks ago. It seems to get stuck at encoding menu stage and not doing anything. Does anyone else have the same problem?

I did not have a DVD handy to burn but I have just created a small 2 minute video and created a Disk Image and also a VIDEO_TS folder, the encoding worked correctly, so it works with some items.
You may get a better responce in the iDVD forum.
https://discussions.apple.com/community/ilife/idvd
regards

Newbie: HELP. Have a CD-RW/DVD-RW drive... Can I burn a DVD in iDVD 6?

I get an error that says I don't have a supported Superdrive...seems I have a CD-RW/DVD-RW. Is there anyway I can burn a DVD? Is there a way to use Toast? Thanks for your help. Totally new around here.

If your G4 has an internal S-Drive you'll be able to address burning DVD's in both iDVD and Toast. If not you can add an ext. device easily. Lacie makes some great external FW devices or you can pick up a Pioneer DL S-Drive for about $30 to $50 and then add it to a FW enclosure like this:
Click Here
In the above example I simply added a Pioneer 110U S-Drive to an external ADS FireWire Enclosure. Works great and requires no additional drivers.
Plus you can also daisy chain multiple enclosures in order to add additional hard drives / external devices.
Hope this helps.
SDMacuser
(3) G4 PM's/(3) S-Drives/Sony TRV900/Nikons/6FWHD's/PS7/iLife06/FCPHD/DVDSP/etc. Mac OS X (10.4.8) My ichatav AIM account is: SDMacuser1 (Please use Text chat prior to video)

Picture is shakimg when I burn a DVD using iDVD 8

Can someone help me? Every movie I create looks good when played using iDVD preview but... when it is burnt it shakes!!
Help
Is there a special setting?
PT

Pawel Tauter
Did you use iMovie or FCP to edit the video? if it's the latter, there is no field dominance tab in FCP however you change it thru your sequence, ctrl+ click your sequence in the browser and then choose settings.
Change your field dominance there.... like this:
if on the other hand you used FCExpress and not FCP, then add the following video effect filter:
Effects -> Video Filter -> Video -> Shift fields

Using the Remote Disk the first time - didn't work!

I wanted to install SL on my MBA using the Remote Disk feature, went through all the steps on my iMac where the SL disk was loaded, and all the steps on the MBA.
Everything was going fine until I was asked, on the MBA, to give the password of the network I wanted to join. Well no dice! It just refused it. I tried it numerous times but it kept on refusing it. The password was of course always the correct one.
Anybody know what could be going on? Thanks!

Turning off security on the router did the trick. Thanks!
What I'm now wondering is why Apple, unfortunately did not address this in the instructions of "To use Remote Install Mac OS X" page 46 of the User's Guide:
http://manuals.info.apple.com/enUS/MacBook_Air_Late2008UserGuide.pdf
Would've saved a lot of people a lot of problems!

After burning to dvd, using idvd, movie stops on frame but audio continues

After creating imovie which works perfectly, and also after trasferring to idvd works perfectly, i have problems when playing back dvd after burning to disc. The movie stops but the audio continues. I altered the clip but same thing happened in next clip after next burn. I don't think its a corrupt clip, but maybe something to do with WHEN it occurs in the movie. Any suggestions? After 4 goes and many hours burning I am stumped!

Hi Tomma1
And welcome to apple discussions. It's good you chose to use 16 bit audio for all of your source material. And assuming this is accurate info .... From what I can tell, you are doing nearly everything correctly. However let me ask you a few questions.
1. Are you using the boot volume (the hard drive where iDvd and Leopard are actually located) to encode your dvd (yes/no)?
2. More importantly, does the disc image also go out of sync when played thru apple's dvd player app? or does it only happen on the burned dvd-r?
3. Are you using Verbatim Dvd-R or an alternate brand? if it's the latter, then for troubleshooting purposes while on this forum; please use Verbatim Dvd-R. (it helps us eliminate additional / possible variables). Thereafter feel free to use the media that works best for you and your mac.
4. Have you tried an alternate encoding setting other than pro quality setting? and do you get the same results?

Can not burn to dvd or blue ray disk

I've attempted to share a 35 minutters video to use with a blue ray disk, but I continue to get the following message:
The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
I have OS 10.10.2 and FCPX version 10.1.4.
Thanks in advance,
Buchholz

Thanks, I did check prevent APP Nap, (it was uncheked.
Now it is returning following.
I did remove some movie secuences that I thought may be corrupted.
It seems that we are closing in on the problem.
Thank you in advance.
Buchholz

Can I burn a DVD with Leopard?

I just purchased a new MacPro and it should arrive in about 2 weeks. A simple question. Can I burn a DVD using the OS or do I need a seperate software package to do this?
I haven't used a MAC in about 20 years so I am a "newbie".

You can burn a data DVD with Leopard's Finder:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8398.html
or Disk Utility:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8729.html
and the Mac Pro also ships with iDVD which supports up to 2 hours on a 4.7 GB DVD, and over 3 hours on an 8.4 GB Dual Layer DVD.
Since I'm not as familiar with iDVD, you may want to post your question here if you plan on using it:
http://discussions.apple.com/category.jspa?categoryID=128
Other movie DVD software made by third parties offer additional capabilities.

Older OS Disk Utility first aid use on newer OS

I have an external drive that has a bootable backup (10.3.7) of my Powerbook. The Powerbook currently is out of commision. I plugged the drive into an iMac and found the drive would not mount. The iMac's OS is 10.0.3. Can I use it's Disk Utility, First Aid to repair the error on the backup drive? The iMac says that there is an "Invalid node structure."

No, because Disk Utility cannot repair an "invalid node structure" problem. Disk Warrior (www.alsoft.com) may - and I stress "may" - be able to repair the directory, but if not you will need to reformat the drive.

Trial Photoshop CS6 - can I access it as a first-time user?

I downloaded trial Photoshop CS6 on my iMac as a first-time user, knowing that my serial number for CS1 was out of date (I'm retired and haven't used Photoshop for years). But I can't activate it. Is it not available for first-time users and if not, how can I uninstall it safely? I really want to try it out before I buy the full version, and was unaware that I needed a serial number until the install.

You don't need a serial number for trielas. if it timed out, something went wrong.
Adobe trial software expired early
Uninstall it using the uninstaller that comes with the program.
Mylenium

I have problems with my films that become slightly jerky after I have imported and edited them in iMovie and then burned them onto a DVD using iDVD. I can see the weak jerkiness when panning in both laterally and vertically. I shoot with a camcorder Canon

I have problems with my films that become slightly jerky after I have imported
and edited them in iMovie and then burned them onto a DVD using iDVD.
I can see the weak jerkiness when panning in both laterally
and vertically.
I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

I have problems with my films that become slightly jerky after I have imported
and edited them in iMovie and then burned them onto a DVD using iDVD.
I can see the weak jerkiness when panning in both laterally
and vertically.
I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

Burn avi to dvd using idvd

i dont have idvd, i dont even have a mac so this may be a really stupid question, but is it possible to convert an avi file and then burn it to dvd using idvd?
for example if a had a film in avi could i put it on a dvd to watch on a dvd player?

It is possible to put an .avi video on DVD, but it has to be converted into DVD format (which is mpeg-2). Another wrinkle is that .avi is a so-called "container" format and it is more or less difficult to convert .avi files depending on the format (codec) inside the container.
iDVD is fairly limited in the types of video formats it can convert (the latest version is the most flexible). If you have a very specific video you're wanting to convert, and thinking about buying a Mac, you could take it to an Apple store and see if iDVD recognizes the format. Alternatively, try visiting a Mac user group and see if they can be of assistance.
John

Can't burn a DVD using IDVD nor Disk Utility- first time user-what is wrong

Similar Messages

Maybe you are looking for