Can't burn any CD/DVD ?

Hello,
this is my BIG problem :
i have a P965 Neo motherboard + Dual Core E6600 + 2x 1GbDDR2 800 Corsair + 1x Seagate SATA II 320Gb + 1x ASUS DVDRW.
I have BIOS v1.6, and Jmicron v17.08 installed.
In Bios the IDE/RAID control is set to IDE. The IDE busMaster is set to Enabled.
The hard is plugged in SATA 1 ( the blue one).
In control panel the Primary Ide chanel (the hard-disk) is working in UDMA mode 6, and the secondary Ide chanel (the DVDRW) is working in UDMA mode 4.
When i want to burn any CD or DVD with Nero, Roxio or anything else, i have this nice message :
DMA driver error. CRC error. Burn failled. ???
Have someone a clue, because i give up.

Quote from: eftos
In control panel the Primary Ide chanel (the hard-disk) is working in UDMA mode 6, and the secondary Ide chanel (the DVDRW) is working in UDMA mode 4.
When i want to burn any CD or DVD with Nero, Roxio or anything else, i have this nice message :
DMA driver error. CRC error. Burn failled.
Solved !
I change the IDE cable with one of 80 wires.
This is MAGIC !!!
The 80-conductor cable was first defined with the original Ultra DMA modes 0, 1 and 2, covering transfer speeds up to 33.3 MB/s.
The cable is considered "optional" for those modes.
However, for any Ultra DMA modes above mode 2, the 80-conductor cable is mandatory.
cheers

Similar Messages

  • I can't burn any DVD or CD - burning process interrupts before it ends

    Hi everybody !
    Sorry for my bad english, but I assume you're all aware about the frenches are not very good at english.
    I've got the following problem: I can't burn any dvd or cd. I've already tried with different programs such as Sonic, Nero 7.0, and I Tunes, and I got every time a mistake wich interrupted the burning process before it ends.
    So I don't know what to day ! I've already tried to re install the drivers, but it's didtn't change anything.
    In order to help you, I've saved an error log from nero. I hope it could be helpfull to someone who could help me !
    Here is the log:
    moi
    5C82001080000000000666822849
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32
    NT-SPTI used
    Nero Version: 7.0.0.0
    Recorder: <MAT****A DVD-RAM UJ-841S>Version: 1.60 - HA 1 TA 0 - 7.0.0.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <MAT****A DVD-RAM UJ-841S >Version: 1.60 - HA 1 TA 0 - 7.0.0.0
    Adapter driver: <IDE> HA 1
    === Scsi-Device-Map ===
    DiskPeripheral : FUJITSU MHV2100BH PL atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : MAT****A DVD-RAM UJ-841S atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : AXV CD/DVD-ROM 2.1b axvodka Port 2 ID 0 DMA: Off
    === CDRom-Device-Map ===
    MAT****A DVD-RAM UJ-841S D: CDRom0
    AXV CD/DVD-ROM F: CDRom1
    =======================
    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 2045MB (2095084kB)
    Free physical memory: 1277MB (1308144kB)
    Memory in use : 37 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)
    21.9.2006
    CD-ROM (ISO)
    21:04:46 #1 Text 0 File Isodoc.cpp, Line 6410
    Iso document burn settings
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : TAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE
    21:04:47 #2 Text 0 File Burncd.cpp, Line 3007
    MAT****A DVD-RAM UJ-841S
    SmoothLink activs
    21:04:47 #3 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 81920KB of Memory
    21:04:47 #4 Text 0 File Reader.cpp, Line 124
    Reader running
    21:04:47 #5 Text 0 File Writer.cpp, Line 113
    Writer D: MAT****A DVD-RAM UJ-841S running
    21:04:47 #6 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)
    21:04:47 #7 Text 0 File Burncd.cpp, Line 3301
    Turn on Track-At-Once, using CD-R/RW media
    21:04:48 #8 Text 0 File DlgWaitCD.cpp, Line 277
    Last possible write address on media: 359844 ( 79:59.69)
    Last address to be written: 318786 ( 70:52.36)
    21:04:48 #9 Text 0 File DlgWaitCD.cpp, Line 289
    Write in overburning mode: NO (enabled: CD)
    21:04:48 #10 Text 0 File DlgWaitCD.cpp, Line 2568
    Recorder: MAT****A DVD-RAM UJ-841S
    21:04:48 #11 Text 0 File DlgWaitCD.cpp, Line 456
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    21:04:48 #12 Text 0 File ThreadedTransferInterface.cpp, Line 846
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 318787 (318787) = #318787/70:50.37
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 318785 blocks [D: MAT****A DVD-RAM UJ-841S]
    21:04:48 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1058
    Prepare recorder [D: MAT****A DVD-RAM UJ-841S] for write in TAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 653182976, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    -150 | lead-in | 0 | 0x41 | 0x00
    -150 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    318787 | lead-out | 1 | 0x41 | 0x00
    21:04:48 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1126
    Removed 2 run-out blocks from end of track 1. Length: 318787 -> 318785.
    21:04:48 #15 Text 0 File SCSIPassThrough.cpp, Line 34
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
    21:04:48 #16 Phase 24 File dlgbrnst.cpp, Line 1724
    Caching of files started
    21:04:49 #17 Text 0 File Burncd.cpp, Line 4129
    Cache writing successful.
    21:04:49 #18 Phase 25 File dlgbrnst.cpp, Line 1724
    Caching of files completed
    21:04:49 #19 Phase 32 File dlgbrnst.cpp, Line 1724
    Simulation started at 24x (3 600 Ko/s)
    21:04:49 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2669
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
    21:04:49 #21 Text 0 File MMC.cpp, Line 21541
    Set BUFE: SmoothLink -> ON
    21:10:08 #22 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion
    21:10:10 #23 Phase 33 File dlgbrnst.cpp, Line 1724
    Simulation completed successfully at 24x (3 600 Ko/s)
    21:10:11 #24 Phase 36 File dlgbrnst.cpp, Line 1724
    Burn process started at 24x (3 600 Ko/s)
    21:10:11 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2669
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
    21:10:11 #26 Text 0 File MMC.cpp, Line 21541
    Set BUFE: SmoothLink -> ON
    21:12:16 #27 SPTI -1040 File SCSIPassThrough.cpp, Line 306
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1040)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x10
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 01 76 C0 00 00 20 00 00 00
    Sense Area: 0xF1 00 03 00 01 74 5D 0A 00 13 00 00 10
    Buffer x03390000: Len x10000
    0x72 F1 87 E5 D3 3D 4A 96 F9 B0 73 83 D3 14 72 A1
    0xF3 49 6E 93 44 25 04 6D E5 CE 44 5F 3E C6 79 47
    0xDD DD EA 3A FD 71 4D 32 CB 35 F3 DF 4B 18 BD 7D
    21:12:16 #28 CDR -1040 File Writer.cpp, Line 302
    Illegal block size for command
    D: MAT****A DVD-RAM UJ-841S
    21:12:16 #29 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion
    21:12:17 #30 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader
    21:12:17 #31 CDR -201 File WriterStatus.cpp, Line 200
    Invalid write state
    D: MAT****A DVD-RAM UJ-841S
    21:12:17 #32 TRANSFER -18 File WriterStatus.cpp, Line 200
    Could not perform EndTrack
    21:12:17 #33 Text 0 File MMC.cpp, Line 16273
    <MAT****ADVD-RAM UJ-841S > start Close Session
    21:12:30 #34 SPTI -1040 File SCSIPassThrough.cpp, Line 306
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1040)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x10
    Sense Qual: 0x00
    CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
    Sense Area: 0x71 00 03 00 00 00 00 0A 00 13 00 00 10
    21:12:30 #35 CDR -1040 File WriterStatus.cpp, Line 249
    Illegal block size for command
    D: MAT****A DVD-RAM UJ-841S
    21:12:30 #36 TRANSFER -19 File WriterStatus.cpp, Line 249
    Could not perform Fixation
    21:12:30 #37 Text 0 File WriterStatus.cpp, Line 258
    falling back to disc fixation
    21:12:30 #38 Text 0 File MMC.cpp, Line 16273
    <MAT****ADVD-RAM UJ-841S > start Close Session
    21:12:30 #39 SPTI -1046 File SCSIPassThrough.cpp, Line 306
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 AA 00 00 30 05
    21:12:30 #40 CDR -1046 File WriterStatus.cpp, Line 249
    Illegal disc
    D: MAT****A DVD-RAM UJ-841S
    21:12:30 #41 TRANSFER -19 File WriterStatus.cpp, Line 249
    Could not perform Fixation
    21:12:30 #42 Phase 38 File dlgbrnst.cpp, Line 1724
    Burn process failed at 24x (3 600 Ko/s)
    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 25/04/2005 11:03:00 (Prassi/Veritas driver for win 2K)
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
    So, thanks to you !
    See you !
    Romain

    Hi
    The error log doesnt provide any very useful information.
    According to this error log the simulation was running correct but the burning process was not started.
    In such case its very hard to say why it happens. Possibly the drive is damage and cannot calibrate the lens properly or you use not compatible medias.
    The burning process depands also on the fiels and data which youwant to burn.
    Some data, CD, DVDs are encrypted and its not possible to burn and to copy it.
    In other case you could also try to burn the medias with lower speed and not with 24x.
    But in worth case you the drive has a malfunction and you have to replace it ;(

  • Can't burn any DVD on my macbook pro

    I can't burn any DVD on my macbook pro, also some of previusly burned DVD are not recognized now & cant be mounted. I tryed choosing different software Burn, KKitchen, Titanium Toast 11, LiquidCD, NTIDragonBurn_v4_OSX, ExpressBurn_i (also burn from Finder) and different brands of DVD -- same diagnostics -- Medium error. One brand (TDK DVD+R) is unstable burn one or two disc tnan begin spoil DVD discs. Have you any solutions?
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro8,2
      Processor Name:          Intel Core i7
      Processor Speed:          2,2 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      L2 Cache (per Core):          256 KB
      L3 Cache:          6 MB
      Memory:          4 GB
      Boot ROM Version:          MBP81.0047.B27
      SMC Version (system):          1.69f3
    OPTIARC DVD RW AD-5970H:
      Firmware Revision:          3APE
      Interconnect:          ATAPI
      Burn Support:          Yes (Apple Shipping Drive)
      Cache:          2048 KB
      Reads DVD:          Yes
      CD-Write:          -R, -RW
      DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
      Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
      Media:          To show the available burn speeds, insert a disc and choose View > Refresh

    Have you read this post?  may help you
    https://discussions.apple.com/message/18149044#18149044

  • How to burn DVD and can i burn the same DVD later if its having any space..

    How to burn DVD and can i burn the same DVD later if its having any space..?

    This is called sessions, but it is not recommended and has been largely abandoned by software developers. This was a good thing in the late 1990’s, when opticals discs were quite expensive, and file size quite low.
    applications which reportedly may do this are
    - isoBurn: http://www.macupdate.com/app/mac/40109/isoburn
    - others, I do not remember which ones, try SimpyBurns, Burn, Dragon Burn and LiquidCD, you will find all in macupdate.com, test which ones suit you.
    Otherwise, I do not recommend you such time consuming and inefficient solutions, optical drives are being replaces by more capacitive, cheaper and more practical solutions, like external disks. But, if you insist, you will find what you are looking for.

  • Suddenly I can't burn any tunes to disc.  I receive an error report - 4280.  What's the problem?  It all worked fine last week.

    Suddenly I can't burn any turnes to disc.  I receive an error report - 4280.  What's the problem?  It was all fine last week.

    Additional information: 
    -also ran "Repair" with new download of iTunes
    -am using the same spindle of CDs that worked perfectly a month ago.  Tried another brand also to be safe.  None worked.
    -ran CD/DVD diagnostics within iTunes with Apple Care - no issues apparent
    -also tried write-speed 20X on advice of Apple Care (don't know why they thought 20X would be the magic number after the other 3 I tried didn't work)
    -tried running itunes in another user account on the computer - same problem, same error code
    -Apple suggested it was a copyright issue.  I can't even burn music that I created/recorded myself, so that doesn't make sense.
    -They thought maybe Quicktime wasn't installed properly, so we checked a film in Windows Media - it played, meaning Quicktime was fine apparently. 
    Solution:
    Unclicked CD text option & Sound Check, ran burn from the File drop down menu (max speed) on a Philips CD-R and it worked!  Had been right clicking the playlist name and selecting Burn option from there.  That being said, it did not work on 2 other brands prior, with same settings.  Not sure why.  Just happy it's working again. Is it a brand issue?

  • My laptop can't read any cd/dvd and problem with LHS shift key

    My laptop (HP Pavilion dv6-2005tx Entertainment Notebook PC) can't read any cd/dvd's when i put them in the drive and also my LHS shift key does not  work while pressing it for writing/using capital letters.  please help me at the earliest.

    Quote from: eftos
    In control panel the Primary Ide chanel (the hard-disk) is working in UDMA mode 6, and the secondary Ide chanel (the DVDRW) is working in UDMA mode 4.
    When i want to burn any CD or DVD with Nero, Roxio or anything else, i have this nice message :
    DMA driver error. CRC error. Burn failled.
    Solved !
    I change the IDE cable with one of 80 wires.
    This is MAGIC !!!
    The 80-conductor cable was first defined with the original Ultra DMA modes 0, 1 and 2, covering transfer speeds up to 33.3 MB/s.
    The cable is considered "optional" for those modes.
    However, for any Ultra DMA modes above mode 2, the 80-conductor cable is mandatory.
    cheers

  • Can I burn to mini-DVD disc

    Can I burn to mini-DVD discs on my iBook G4? I have a superdrive and I have burned the project succesfully on a regular DVD but the person that I am burning it for was told it had to be turned in on a mini-DVD.
    Not knowing if the mini would be compatiable or possibly get stuck I was afraid to try it without some comformation that it has been done by someone else before. It is a work computer.
    I tried to burn it on my sons PC and on my Mom's PC but neither worked. Neither acknowledges the mini-DVD.
    iBook G4   Mac OS X (10.4.4)  

    Hi Amber,
    as Scalz wrote, never put non-standard-sized/shaped disks into slot-in drives...!!
    besides....
    miniDVD can have two meanings:
    * these %$§*? DVDcamcorders record on miniDVD (small diameter, but mainly DVD)
    * and you are able to burn a DVDcontent (muxxed mp2 stream) onto a CD-R - that is also called miniDVD.... I was able to fit 10min onto such, but my DVDstandalone doesn't accept such disks....
    my guess, the recipient of your project tries to use his DVDcamcorder as a DVDplayer.... wow....... you get "grown up" DVDplayers for 39$.....
    many external burners accept these miniDVD-r... maybe, someone can borrow you such? and, my guess, iDVD doesn't accept them, you need to use Toast (as I did for my dvd-cd-r experiment)

  • I can't burn CD or DVD.  I get a "medium write error."  I bought an external CD drive, and get the same message.

    I can't burn CDs or DVDs.  I get a "medium write error."  Bought a new external CD drive, and get the same message.

    What are you trying to achieve?  Are you trying to burn to disk via the iPhoto Share ➙ Burn menu? That produces a mini library on the disk that can be used only by a Mac running iPhoto.
    If you want to burn just some image files to a data CD/DVD disk then follow Larry's recommended workflow.
    What disk type and manufacturer are your using? What system and iPhoto version are you running?  Have you run the OS X Mountain Lion: Use Apple Hardware Test? When did the burning proiblem begin?  If you can't burn a disk from the Finder then it's a hardware or system problem and not an iPhoto one.
    OT

  • Can't burn Dual Layer DVD-R on new Mac Pro?

    Can't burn Dual Layer DVD-R on new Mac Pro?
    I have a new Mac Pro with Pioneer DVD burner built in. I've since found out that it only burns Dual Layer +R type, and not the -R type.
    My replication company need a Dual Layer -R type DVD as they can't get a glass-master off the +R type Dual Layer discs.
    Can anyone recommend/suggest a cheap way of being able to either master off a DVD to Dual Layer -R disc, or perhaps copy my Dual Layer +R to a Dual Layer -R ?
    Thanks guys.

    Everything I have ever read about the DVD-R DL discs says the layer break can't be chosen by the author. It is not a DVDSP issue; it is an issue with the media.
    This is actually listed in the DVDSP 4.1 Late Breaking News on page 15:
    "Using DVD-R Dual-Layer Media
    If your system contains a DVD drive that can write to the new DVD-R dual-layer media, you can burn your DVD project to it with DVD Studio Pro. However, there are several issues:
    Since there is no current way for DVD Studio Pro to identify DVD-R dual-layer media as having two layers, burning a dual-layer project to it results in a warning appearing telling you that the DVD media may have insufficient room to hold the project. This message is based on the assumption that the disc is single layer. Both layers of the disc will be written to as needed, however, when you click Continue.
    If you are burning a dual-layer project, the break point you set will not affect where the layer break actually occurs. Instead, the first layer is written to until filled, at which point the drive switches to writing to the second layer.
    The switch between layers is a seamless layer change not supported by some DVD players, which may stop playing the disc when the switch point is reached.
    Important: Do not use DVD-R dual-layer media unless these issues do not impact your project.
    You can use DVD+R double-layer media for burning your dual-layer projects. With DVD+R double-layer media, DVD Studio Pro places the layer break point and sets the switch point to be nonseamless as specified in your project."
    Can you tell us what drive you have and what firmware (revision) it is?

  • How can I "burn" a music DVD on my I-Mac?

    How can I burn a music DVD on my I-Mac to play in my auto DVD/CD player?

    I answered your question in your other thread:
    https://discussions.apple.com/message/20118368#20118368
    There is no way to do it in iTunes that I know of - you can only burn CDs there. You do need other software to burn to a music DVD.

  • I keep getting error 4310 and can't burn any cd's

    I have no idea why all of a sudden I can't burn any cd's.  I continue to get an "error 4310" as it cancels the burn.
    It seems this started after upgrading to Windows 8.1 but I am not sure because now I also tried my Windows Media
    Player and that won't work either...something about codecs.  I am illiterate when it comes to fixing computers but if
    there's a simple fix can someone please help.

    Hey amyroseofclyde,
    Thanks for the question. After reviewing your post, it sounds like the iPhone is not appearing in iTunes. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    iOS: Device not recognized in iTunes for OS X - Apple Support
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Can't burn any DVDs on external firewire drive

    Since I installed OS 10.4.9, neither DVDSP or toast titanium will recognize a "stable connection" to my external firewire lacie recorder... the message I get from toast is:
    1. Interface Error: -50
    The connection is not stable
    2. The drive reported an error:
    SENSE KEY = Illegal request
    SENSE CODE = 0x30, 0x50
    CANNOT WRITE MEDIUM, INCOMPATIBLE FORMAT
    And I've been using the same media for years, without a problem.
    But if I connect this device to another laptop or desktop, it'll work fine.
    It still can burn CDs, and read every format. But just can't burn DVDs.
    DVDSP gives me the same problem. I can use my internal burner but it's slower than using my external drive.
    Ideas?
    Thanks.

    karol wrote:
    Have you tried using ntfs-3g?
    That's the first time I've heard about ldm, but its readme https://github.com/LemonBoy/ldm says it only automounts stuff, nothing about rw support for every existing filesystem.
    Edit: https://bbs.archlinux.org/viewtopic.php … 4#p1075004
    TheLemonMan wrote:About the drive being mounted as read only, by default ldm uses the standard mount options which include the "ro" flag, unless a fstab rule is set. So doublecheck your fstab.
    yeah everything works now thanks again

  • I can't burn any CDs.  Error 4280.  No solutions found in similar threads yet.

    Hi all,
    I can't seem to burn any of my music (purchased OR ripped from my own CD collection) in iTunes all of a sudden.  It begins the process, then cancels about a minute in and returns an error code of 4280.  I have researched it on the web for a month now, with no success.
    Some say it's a problem with Sony drives.  I don't have a sony drive.
    Some say I need to update my iTunes and/or restart my computer. I have done both - no change.
    Some say I need to decrease the write speed.  I have attempted it at 16X, 8X, and 1X, with no success.
    iTunes CD diagnostics suggested unclicking the CD Text option.  I did.  Still canceled the burn.
    I know the drive recognizes the discs, because if I close iTunes and insert a blank disc, I get the pop-up window with options, and it will play audio and video.
    I'm running Windows XP Home Edition Service Pack 3 (Build 2600)
    Drive: Matshita DVD-RAM UJ--845S
    Acer Aspire 5670
    iTunes 10.5.1.42
    QuickTime 7.7.1
    Apple Application Support 2.1.5
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Does anyone have a solution?  Or anything I can try that I haven't already?  I have read over 30 threads now that offer no help, so please, do not repost link to threads as help unless you have read them and have found that they contain suggestions that I have not covered here.  And thank you for taking the time to assist me.

    Additional information: 
    -also ran "Repair" with new download of iTunes
    -am using the same spindle of CDs that worked perfectly a month ago.  Tried another brand also to be safe.  None worked.
    -ran CD/DVD diagnostics within iTunes with Apple Care - no issues apparent
    -also tried write-speed 20X on advice of Apple Care (don't know why they thought 20X would be the magic number after the other 3 I tried didn't work)
    -tried running itunes in another user account on the computer - same problem, same error code
    -Apple suggested it was a copyright issue.  I can't even burn music that I created/recorded myself, so that doesn't make sense.
    -They thought maybe Quicktime wasn't installed properly, so we checked a film in Windows Media - it played, meaning Quicktime was fine apparently. 
    Solution:
    Unclicked CD text option & Sound Check, ran burn from the File drop down menu (max speed) on a Philips CD-R and it worked!  Had been right clicking the playlist name and selecting Burn option from there.  That being said, it did not work on 2 other brands prior, with same settings.  Not sure why.  Just happy it's working again. Is it a brand issue?

  • Can you burn an AVCHD DVD using Premiere Pro 4.1?

    Alright I've been hunting the forums and net for a few hours on this one question.
    I import my AVCHD video files using Sony Picture Motion Browser for the HDR SR-12 using the full HD setting (1920x1080i) I then pull these into Premiere 4.2.1 and have created an edit, my question is, it possible to output to an AVCHD DVD i.e. a standard DVD-R with the AVCHD edit on it from Premiere/Encore?
    It's easy to burn clips straight to AVCHD DVD using Sony PMB, but not an edited file.
    I realize there are no menus possible if you do it this way, but I have an AVCHD capable DVD deck and an HD Capable screen and would really like to see how this looks. Anybody know any tricks or workarounds for this? It seems that this would be sadly lacking if it was not possible or simply an effort to force one to adapt the entire workflow to Blu-Ray for HD content which I am not prepared to do.
    I am assuming that if you could export the same file type that came in (i.e. AVCHD .mts files) that you could then have Sony PMB burn it to AVCHD DVD but I haven't figured out how to export it as such as there is only Blu-Ray output options.
    Any help, tips or tricks would be appreciated!!!!
    Regards,
    DSW

    Answering myself here for the benefit of anyone else trying to solve this problem.
    I have been pulling my hair out trying to solve this problem for the last 48 hours of utilizing AVCHD footage at AVCHD quality. I finally did find somewhat of a work around, but it requires Adobe PP CS4.2.
    There is a plug-in here:
    http://www.mainconcept.com/site/prosumer-products-4/mpeg-pro-hd-7850/features-7861.html
    Which will actually output your edit as an AVCHD file. You can then burn this straight to an AVCHD using Nero 9 and keep the highquality level of your clips and not need Blu-Ray. The DVD player will need to be AVCHD capable, but I just bought one of those for $40 as compared to the $200+ of most Blu-Ray players.
    Or if you want to be really sneaky, you can transfer it back onto your camera and play it straight to your TV using the HDMI cable.
    Hope that helps anyone stuck with the same problem.
    Regards,
    DSW

  • Can't burn to 4x DVD-RW, Can to 1x or 2x

    Hi-- here are the specs on my SuperDrive:
    HL-DT-ST DVD-RW GCA-4020B:
    Firmware Revision: D02D
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 1312 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No
    I can burn to 1x or 2x DVD-RW but not to 4x. Any ideas on what I might try? Here is the error I get when I try to burn from a burn folder in Finder:
    Burning the disc failed because communication to the disc drive failed. (Error code 0x8002022)
    Thanks for any suggestions....
    iMac Flat Panel   Mac OS X (10.4.7)  

    On many of the older Optical Drives they would only burn at 1X and 2X.
    That being said they were also very particular as to the Media that was used in them. Only the specified speed media worked well unless you checked the media you purchased carefully they were unreliable and would give you errors or spit the media out.
    Recently many of the Media Manufactures have been made aware of this problem and started making media that is of much better Quality.
    I also have an older burner in my Powerbook, I have found that Maxell 16X DVD-R media in the individual jewel cases will burn at 1X through and including 16X.
    You must read the packaging on this media. Not all 16X media will burn at the slower speeds. This media will burn at the highest speed your drive will allow.
    Cheers Don

Maybe you are looking for