Can't burn CD - iTunes doesn't recognize CDs

I used to be able to burn CDs fine with iTunes. For the past month or so, when I try to burn a CD, iTunes doesn't recognize it and asks me repeatedly to insert a new CD. I am now unable to burn any CDs.
I can play a CD fine and have also tried different CD brands. Dell tells me this is a problem with iTunes but offers no real solution.
Can anyone please help?
Thanks
Dell   Windows XP  

Sounds as if you are burning an MP3 CD, correct?
I right clicked and said to convert to MP3 and it showed it doing it but when I go to Info the song still says it is ACC.
iTunes will add another copy in MP3 format. You need to add this new MP3 copy to your playlist and delete the AAC file from your playlist.
can't burn because it is a ACC file
That would be AAC, not ACC.

Similar Messages

  • I have bought a Season pass for The Big Bang Theory. I have downloaded alle recent Epiodes without any Problems. But now... i can't download the latest Version for free. Itunes doesn't recognize my Season pass and let's me buy it again. Whats going?

    I have bought a Season pass for The Big Bang Theory. I have downloaded alle recent Epiodes without any Problems. But now... i can't download the latest Version for free. Itunes doesn't recognize my Season pass and let's me buy it again. Whats going? Do I miss something?
    Best regards,
    Michele

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • My iPod Classic 160 is in disc mode and won't turn off, itunes doesn't recognize it - ¿how can I make it work again?

    My iPod Classic 160 is in disc mode.  I responds to nothing.  iTunes doesn't recognize it.  It doesn't sync.  I've tried to restore and got error 1429.  Now it just stays in disc mode and won't turn off.  I'm keeping it connected to the charger so it doesn't go dead.  Is there anything I can do to resurrect my pod?

    To get out of disk mode do a iPod Hard Reset.
    Toggle the Hold switch till you dont see the red mark.
    Press Menu and Center buttons simultaneously for about 10 secs till the Apple logo comes ON then release the buttons
    Select your preferred language.
    See this Apple support Article on the 5Rs.
    http://www.apple.com/support/ipod/five_rs/classic/
    If you try to restore and get a1429 error message, read this Apple Support Article
    http://support.apple.com/kb/TS1372
    Good Luck!

  • My itunes doesn't recognize my ipod touch because I've never connected it before and it is disabled, it won't let me restore it, it says to enter a passcode in order to connect and I can't because it is disabled

    My ipod touch is disabled and it says to connect to itunes to restore.  I have never added the ipod to my devices on my itunes so when I connect it says that itunes doesn't recognize the device.  I then put it in recovery mode and connected it to itunes and I clicked restore and it says that itunes can't connect until I put in the passcode, but I can't put in a passcode because it is disabled!!!  I don't know how to fix it and it is only a month old, should I take it back?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen        
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • I can't restore my iphone.  when i plug it in, the phone recognizes that it is plugged into itunes, but itunes doesn't recognize it

    My iphone charges when I plug it into my computer, but itunes doesn't recognize that any device is attached (I have the latest version; a pc, not a mac; it's a Verizon iphone).  Also, the phone's info button (which should tell me the serial number) says "MEID: Unknown".  Apple support won't help me without the serial number...
    Ideally, I would like a button combination to restore the phone to factory settings, so that I can activate it.  Or at least figure out the serial number so I can get tech support.

    Serial # is below the model# on the BOX !!
    looks like you bought a Craked Iphone and Not a NEW one from Apple direct or the carrier.

  • I have an old version of itunes installed in my iPod.I had a syncronize mistake and I tried to change iTunes to 10.4.1. Now iTunes doesn't recognizes my ipod because of the difference between versions. What can I do?

    I have an old version of itunes installed in my iPod.I had a syncronize mistake and I tried to change iTunes to 10.4.1. Now iTunes doesn't recognizes my ipod because of the difference between versions. What can I do?

    I reinstalled the current version of iTunes, 8.2.1.
    Current version?? Did this post appear out of a time warp?  The current version is 10.7!
    http://www.apple.com/itunes/download/

  • Hi,I had an ipod touch 3 and then buy an ipod touch 4 and never went back to update the 3, and remained in the 3.1 software and now try to update and could not and to top it I restored it and now it doesn't work and itunes doesn't recognize. WHAT CAN I DO

    Hi,I had an ipod touch 3 and then buy an ipod touch 4 and never went back to update the 3, and remained in the 3.1 software and now try to update and could not and to top it I restored it and now it doesn't work and itunes doesn't recognize it. WHAT CAN I DO?

    OMG!!! NEVER MIND, I JUST DID IIIITTTTT!!!! YAYYYYYY!!!

  • After i plug in my iphone 5s, it always asks me to trust the laptop, i click trust and my laptop makes that noise as if I've pulled my phone out, but i haven't, so now my itunes doesn't recognize my phone, please please help me?

    After i plug in my iphone 5s, it always asks me to trust the laptop, i click trust and my laptop makes that noise as if I've pulled my phone out, but i haven't, so now my itunes doesn't recognize my phone, please please help me?
    THis also happened with my old iphone 4s
    I need help!

    Hi loist,
    Thanks for visiting Apple Support Communities.
    If your iPhone is not being recognized by your computer after you click "Trust," the troubleshooting steps found here can help:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jeremy

  • ITunes doesn't recognize my iPhone 4s

    iTunes doesn't recognize my iPhone 4s.
    Whenever I plug my iPhone into my computer it starts to charge like normal but iTunes does not recognize it. I've tried all of the troubleshooting steps provided by Apple (Downloading the latest iTunes version, reinstalling iTunes, updating the software on my phone, restarting my computer, etc). I've also looked at various tutorials on different websites that showed other methods. Among these methods were going into the control panel Device Manager or the Services program and taking certain steps within said programs. It seems I have tried everything under the sun to get iTunes to recognize my iPhone and so far nothing has worked. I have no idea what to do which is why I've resorted to this. Anybody know what might be going on? I'm running Windows 7 64 bit on my computer with the latest iTunes installed as previously stated. I've also just installed iOS 5.1.1 on my iPhone and this has not changed anything. If anyone has any idea what is going on and would like to tell me how to fix it, it would be much appreciated. Thanks.

    If you've gone through this article and made sure the Apple Mobile device service is installed and running, you should look at the security software on your computer.
    To make sure it isn't the security software, you can either follow the steps in the article below, or you could just uninstall it and test again. Then reinstall it again when you're done.
    iTunes: Troubleshooting security software issues

  • I have an iPhone 5s on a windows 8 platform. iTunes is 11.1.4.62, iTunes doesn't recognize my iPhone and I am unable to sync.

    I have an iPhone 5s on a windows 8 platform. iTunes is 11.1.4.62, iTunes doesn't recognize my iPhone and I am unable to sync. After the last iTunes update my phone wasn't recongnized and the phone asks if I want to trust the computer everytime I connect it. Other programs can access the photos and recognize the iPhone 5 but not iTunes.

    Try holding down CTRL as you launch iTunes to see if it will repair the drivers.
    Or try Cerbu's post here.
    Or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
    tt2

  • Iphone 4S block during update 6.1.3 and iTunes doesn't recognize my phone

    Hi. During update on iphone 4S, I had an error message from itunes. It said that update wasn't possible. And now Iphone block on the screen to connect to iTunes. But iTunes doesn't recognize iPhone. If I try to reinstall the last version, I have the message that it is impossible because the current version is newer!....
    Can somebody help me please?

    Error 2, 4 (or -4), 6, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • ITunes doesn't recognize my iPhone 3G

    Like the title says, iTunes doesn't recognize my iPhone 3G. What can I do? I have already done the troubleshooting, like dowloaded the newest version of iTunes and Mac OS, started again the computer and so on, but it doesn't help me at all. Is iPhone 3G too old for recognizening, beacuse it can't be updated to iOS 6? Please help me! Thank you.

    iOS: Device not recognized in iTunes for Mac OS X

  • HT1386 My Itunes doesn't recognize my Iphone 4s, but my computer sees it. What should I do without having to restore/reformat my phone?

    i updated the iOS a few days ago, and now my itunes doesn't recognize my phone, but my computer does. Help please cause I created ringtones I want to use and i can't pull them off my phone til this issue is resolved (SN: My carrier is Verizon if that makes a difference)

    You can restore from the backups that you made in icloud
    iCloud: Backup and restore overview

  • HELP  Itunes doesn't recognize my iphone 4s

    Updated Itunes to latest version
    Attempted to update to ios7 and got error message
    Asked me to restore  which I did. 
    Iphone stopped working have the itunes logo and the usb plug on phone
    Itunes doesn't recognize my iphone
    How can I get my phone working again. 
    Challenged because I'm not knowledgeable on computers and technical terms
    Can someone help or do I need to go to the Apple store

    Type "iTunes does not recognize my iPhone" in the search box at the top of this page.

  • ITunes doesn't recognize IPod Nano 7th Generation

    ITunes doesn't recognize my IPod Nano 7th Generation. I get a message saying "An IPod has been detected but could not be identified properly". My Windows 7 computer shows the IPod Nano as a removable drive until I launch ITunes at which point it disappears from the list of removable drives. I even disabled my security software (Norton 360 but not Spybot S & D) and it didn't solve the problem. Any suggestions..............Thanks

    Hello Aruniem,
    The article linked below provdies information and steps that can help resolve this issue.
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/TS3218
    Cheers,
    Allen

Maybe you are looking for

  • CIsco ASA 5505 and VPN licenses

    Hi, Cisco ASA 5505 comes with 10 VPN licenses in a standard configuration. How those licenses are counted? Will I need a license per one IPSec SA? If I have two site connected with LAN-to-LAN VPN with 10 subnets at one site, how many licenses will be

  • Create or Replace Package syntax different in SQL Navigator?

    Hi, I compared the same piece of code in both toad and sql navigator. In toad, the syntax for Package was as follows: CREATE OR REPLACE package body name_of_package but in SQL Navigator, the same code is displayed as follows: package body name_of_pac

  • Mapping of values in multiple nodes into one

    Folks, I have a message with the following structure <Document>   <Item>     <ID>1000</ID>    <CustomerPO>128389</CustomerPO>    <Reference>      <Category>A</Category>      <ReferenceID>31909031</ReferenceID>    </Reference>   </Item> <Item>    <ID>

  • HP Deskjet 2545 continues to feed paper when nothing in print queue. How do you clear it?

    Printer not printing.  Installed software from HP.  Seems like there is no communication between printer and computer. 

  • Create new sheets in report with script?

    Is it possible to create new sheets in the report using VBscripts? I am writing a script that will create a report with different sheets. The number of sheets in the report will change in each report depending on the number of groups added in the dat