Can't Burn CD with iTunes

Hey I can't burn my playlist to a CD. It always says "Checking Playlist", but then when it finished checking the playlist, iTunes just freezes. I tested Windows Media Player to see if it was the Drive or the iTunes and it was iTunes because I could burn a CD using Windows Media Player. Any help would be great. Thanks.

There is a board for this kind of help. Click iTunes for Windows at the top of the screen and there should be a board called "CDDB\Importing\Burning" and there you should be able to get the proper help. The using iTunes board is for those having actual problems with the iTunes app like losing your sound or even having trouble opening iTunes. I accept that you are new to Discussions, and I suggest exploring a little bit! These discussions take some time to get used to. You'll have it soon!

Similar Messages

Can't Burn CD With Itunes 11.0.1.12

This is the error message info that i receive when i try to burn cds - The last failed MP3 CD burn had error code 4310(0x000010d6). It happened on drive D:   HL-DT-ST DVDRAM on CDR media at speed 10X. I have a new Acer Aspire V5-571. I made sure the drivers were up to date...i know i know i should have stuck with a macbook pro.

I have the same problem, with a new Acer Aspire M5-581T. Windows 8. I have heard this is a common problem. I would love to burn CDs again. I am a long-term iTunes customer, and have always been able to burn.
"The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive D:   HL-DT-ST DVDRAM on CDR media at speed 10X."
Below are my diagnositcs as copied from iTunes
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
Acer Aspire M5-581T
iTunes 11.0.2.26
QuickTime 7.7.3
FairPlay 2.3.31
Apple Application Support 2.3.3
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.63.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0071B8580AD20308
Current user is not an administrator.
The current local date and time is 2013-02-24 17:55:33.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.2.26 (x64) is currently running.
iTunesHelper 11.0.2.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: UBHelper (2.0.0.14),
UpperFilters: NTIDrvr (1.0.0.10), GEARAspiWDM (2.2.3.0),
D:   HL-DT-ST DVDRAM, Rev
Audio CD in drive.
Found 1 songs on CD, playing time 04:33 on Audio CD.
Track 1, start time 00:02:00
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are:   10 16 24.
The drive CDRW speeds are:   10.
The drive DVDR speeds are:   10.
The drive DVDRW speeds are:   10.
The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive D:   HL-DT-ST DVDRAM on CDR media at speed 10X.
Thanks all!
Dave

Can't Burn MP3s with iTunes 10

Hello,
I am trying to burn a MP3 CD using iTunes 10, but every time I try it says "Disc Recording Not Found". I am just using a regular CD-R blank CD. It's Memorex if that helps at all.
Thanks in advance.

6Rings wrote:
why hasnt itunes replied to this i am VERY FRUSTRATED with this whole thing.I am reallly searching for some outher kind of media plyer SERIOUSLY.
Who is "itunes"? If, by "itunes", you mean Apple, then the reason they haven't replied is because this is a user-to-user forum. Apple doesn't provide technical support through this forum. If you want to contact Apple directly, use the information in the Contact Us link at the bottom right of every page.
Best of luck.

Error 4000 burning CDs with iTunes 7.1

iTunes checks the disc, then burns 3-4 songs, then cancels the CD burn wasting yet another disc. Also, I cannot backup my purchased songs with the backup feature. I get the same error 4000 when attempting to make a backup disc. These problems only began after installing iTunes 7.0. How can these problems be fixed? TIA.
BTW, other CD/DVD burning applications continue to function fine.
Here are the iTunes 7.1 diagnostics results:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Compaq Presario 061 DQ181A-ABA S6500NX NA410
iTunes 7.1.0.59
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0), AFS2K (3.1.21.0),
UpperFilters: pwd_2k (7.0.0.162), GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
VIA/S3G UniChrome IGP
Connected Device Information:
DiskDrive, ST3160021A
Could not get bus type for CD, 50. Problem with installation of drive in Windows.
, Bus Address [0,0]
CDROM, HP DVD Writer 300c, Bus Type ATA, Bus Address [0,0]
CDROM, SAMSUNG CD-ROM SC-148C, Bus Type ATA, Bus Address [1,0]
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
E: HP DVD Writer 300c, Rev 9h04
Audio CD in drive.
Found 14 songs on CD, playing time 56:11 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:26:34
Track 3, start time 07:49:60
Track 4, start time 12:18:51
Track 5, start time 16:56:41
Track 6, start time 19:33:10
Track 7, start time 24:03:41
Track 8, start time 28:36:25
Track 9, start time 32:52:61
Track 10, start time 36:26:19
Track 11, start time 40:53:66
Track 12, start time 44:55:32
Track 13, start time 49:39:37
Track 14, start time 53:09:12
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 12 16.
The drive CDRW speeds are: 8 12 16 0.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
F: SAMSUNG CD-ROM SC-148C, Rev B100
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive E: HP DVD Writer 300c on CDR media at speed 16X.
Compaq Presario Windows XP

Same problems here. I have 2 different computers and tries 2 different CD-Rs and I found out that it has soemthing to do with the new "Protected AAC audio file" format.
Open iTunes, click on music, on the listing side of the screen right click on name, and then click on "kind".
I bet you can't burn anything with the "Protected AAC audio file."
No solutions yet, so just don't buy anything else from iTunes for now.

Help Please: Unable to Import or Burn CDs with iTunes

Hello,
At some point over the last few updates I seem to have lost the ability to import or burn CDs with iTunes. I've done so many times in the past with no problem however when I attempt to do so now my entire PC restarts or in a few cases gives me the generic Windows "iTunes needs to close" error.
So far I've made sure my PC is not overheating. I've ruled out spyware or viruses using AVG and CCleaner. I've swapped out power supplies only to have the problem continue. I am able to listen to music and/or burn CDs and DVDs in both of my drives using other applications with no problem. I've tried fresh, clean installs of iTunes all the way back to 8.02 with no success. I've even gone as far as to completely reformat Windows only to have this problem continue.
Any help or suggestions would be most welcome. I will be glad to provide any requested information, thank you.
Message was edited by: Simbelmyne

What good is buying your music through itunes if you can't burn a cd and/or back it up? Why isn't this issued solved - I can't burn a cd. I have missing registry files and warning that says to reinstall which I've tried unsuccessfully. Hopefully they'll find a fix before I lose my 500 songs I've purchased...does anyone back up on a external hard drive - any suggestions? Thanks

Device filter Problems, can't burn cds in iTunes, Blank CDs appear to have

Problem was first noticed because I can't burn CDs in iTunes.
The problem is that all blank CDs show that they have no space on them available. If I look at the properties of a blank CD, they show 0 bytes used, 0 bytes free and 0 bytes available.
By removing the upperfilters and lowerfilters in the registry, (accoring to the Microsoft prescribed method for this problem found at http://support.microsoft.com/kb/314060) the problem is solved for my whole sytem except for iTunes. iTunes then tells me that "the registry settings used by iTunes drivers for importing and burning CDs and DVDs are missing. ... Please reinstall iTunes."
I reinstall or repair iTunes and then iTunes opens fine but I can't burn with iTunes or any other program since I am back to all blank CDs showing there is no space available.
The iTunes toubleshooting Fac found at http://docs.info.apple.com/article.html?artnum=302976 has been tried also and does not change the problem of blank CDs having no space available.
Here are the cd diagnostics: (Run with my whole system working except iTunes burner)
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Gateway ESSEX2
iTunes 7.1.1.5
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Current user is an administrator.
Video Display Information:
NVIDIA GeForce4 MX 440 (Gateway)
NVIDIA GeForce FX 5200 (Gateway)
Connected Device Information:
DiskDrive, WDC WD2500JB-53EVA0, Bus Type ATA, Bus Address [0,0]
CDROM, HL-DT-ST DVDRAM GMA-4020B, Bus Type ATA, Bus Address [1,0]
CDROM, JLMS XJ-HD166S, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
Gateway Essex2 Windows XP

Same problem here!!! This is driving me crazy. Glad to see it isn't me not knowing what I am doing when a couple of months ago I had no problems now as of last night after trying to burn to a CD I had the exact same issue.

Can't burn CD with I-Tunes

I could burn CDs with Itunes a couple of years ago. Now I can't. "Settings are missing....remove other CD burning software" is the message.
After updating I-tunes to 9, the DVD drive is missing. Have had this problem before and went through the regedit steps to remove upper and/or lower filters. The DVD drive came back, but still I-Tunes was not burning.
Is there a permanent fix for this? I am nervous about doing the regedit steps in order to burn DVDs/CDs in Windows. AND would like to make I-Tunes music CDs!
Is there help out there? Do I need a new hard drive? OR......?
Thanks

What model computer?
What operating system is installed?

Since I installed ios 6.1 in my iPhone 4, I can't sync it with iTunes. Can annyone help me? I have already reinstalled iTunes and reseted the iPhone, but it still doesn't sync. Thank you.

Since I installed ios 6.1 in my iPhone 4, I can't sync it with iTunes. Can annyone help me? I have already reinstalled iTunes and reseted the iPhone, but it still doesn't sync. Thank you.

Hello Sean,
It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
iPhone Repair - Other Repairs
https://www.apple.com/support/iphone/repair/other/
Thank you for using Apple Support Communities.
All the best,
Sterling

My iPhone 4 has broken screen, how can I reset it with iTunes

My iPhone 4 has a broken screen. The lock button sometimes works. I need to reset it, can I do this with iTunes. Also, how can you get onto the screen that shows you what phone is connected

You can reset the device through settings > general > reset > reset all settings.
You can restore the software of the device through iTunes.
Depending on your computer operationg system ( Mac or Windows) you will need to find the menu bar ( File, Edit, View...etc) and click View > Show Sidebar.

The Ipod "file shares" can't be used with itune because it's not formatted?

Hi,
I'm using ipod shuffle 512mb. When I connect ipod to my PC, it shows an error message saying "the Ipod "file shares" can not be used with itunes because it is not formatted properly". I am not able to sync the songs into Ipod...
I tried everything but it is not working...
If somebody knows how to resolve this ..... kindly reply to this...
Thanks a lot!!!!!

The iPod shuffle forum would be best to post this question. Here's a link to it.
http://discussions.apple.com/category.jspa?categoryID=199

Computer freezes when trying to burn cds with itunes

I don't know if this would help other people with issues related to burning cds with itunes but here it goes:
My computer running Windows XP SP2 and itunes 7.6.1.9 suddently stopped burning cds via itunes about a couple of versions ago. Burning would start correctly, however the operation never completed successfully, in fact, the computer would completly freeze before getting too far. The computer had to be hard booted, meaning I had to hold the power button to kill it. The only solution that I've come up with that effectively corrects this problem is as follows:
Close itunes
Go to Start > Control Panel > Administrative Tools > Services
Look for IMAPI CD-Burning COM Service and open it (double-click it):
If not started, start it by clicking the Start button
Select Startup Type as Automatic
Go to Recovery tab and set first, second and subsequent failures to Restart the Service
Click Apply and then Ok to close window
Look for iPod Service and open it:
If not started, start it by clicking the Start button
Select Startup Type as Automatic
Click Apply and then Ok to close window
Restart itunes, try burning a cd from a playlist in itunes. There is no guarantee that this will solve your issue, but it is worth a shot, it has worked for me so far.

Hi Toonz,
My CD Diagnostics....
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Hewlett-Packard Presario V2000 (PP985PA#ABG)
iTunes 6.0.2.23
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: Intel(R) 82852/82855 GM/GME Graphics Controller\Intel(R) 82852/55 GM/GME Controller
IDE\DiskST94019A_______________________________3.09___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STDVD-RW_GWA-4080N_______________0C09___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: HL-DT-ST DVD-RW GWA-4080N, Rev 0C09
Audio CD in drive.
Found 16 songs on CD, playing time 55:24 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:22:62
Track 3, start time 07:24:45
Track 4, start time 10:48:10
Track 5, start time 15:09:25
Track 6, start time 15:38:00
Track 7, start time 18:13:72
Track 8, start time 24:20:60
Track 9, start time 26:28:05
Track 10, start time 31:11:25
Track 11, start time 34:39:65
Track 12, start time 36:13:22
Track 13, start time 38:48:47
Track 14, start time 43:30:57
Track 15, start time 48:22:65
Track 16, start time 50:48:10
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 10 16 24.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.

Can't burn CDs in iTunes

I can't burn CDs in iTunes. I get "The attempt to burn a disc failed. An unknown error occurred (4261). I have tried to reduce the speed - didn't work. I have never had a problem before - but after I downloaded the new version of iTunes, I can't burn. I know the burner works because I can burn using NERO. Please help!

I'm assuming you have already resolved the issue, but if you have not, I would recommend that you uninstall iTunes completely and remove anything related to Apple on your computer including Quicktime. See this post for what you need to remove: http://mismike.blogspot.com/2008/03/itunes-wont-close-on-windows-xp-sp2.html. Good luck.
-NKA

Can i connect iphone with itunes on windows pc?

can i connect iphone with itunes on windows pc?
and if i can, am i going to lose everything if the device is the fisrt time is connecting with this pc?

Yes you can connect it.
You will only loose everything if you choose to sync. If you don't then no. But then you won;t be able to do much while connected, as any transfer of data (music, movies, etc..) will require a sync.

My iphone 3gs is charging on the wall charger but wont charge on the pc, have cleaned it, yet it can sync and update with itunes easily, but it still wont charge, have tried several cables as well same effect.

my iphone 3gs is charging on the wall charger but wont charge on the pc, have cleaned it, yet it can sync and update with itunes easily, but it still wont charge, have tried several cables as well same effect.

1) authorize iTunes on your wife's user account for her iTunes store account(s)
2) connect the device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPhone but, since you transferred her purchases in the previous step, your content will be in her library and you can re-populate the iPhone with it.

Burning issues with itunes and Windows Vista Ultimate

I recently purchased a new computer with Windows Vista Ultimate 64 bit version. Since loading itunes on my new computer I can not burn a CD. The message that I receive says that there is no burner available. I know the burner works because I have burned music out of different software programs. I have loaded and reloaded Nero 7 but I am finding that is not the problem. Itunes does not recognize any type of CD burner on my computer. Any thoughts?
Thanks

paul's onto it.
if you run your DVD/CD diagnostics (in itunes "help > DVD/CD diagnostics", select DVD/CD diagnostics) and you see a 2380 error showing up down near the bottom of the diagnostics (you may need to scroll down a bit), try reinstalling the 64-bit version of the GEAR drivers iTunes uses for importing and burning.
here's a link through to the GEAR drivers. note that there are two different versions of the 64-bit drivers. be sure to get the one that matches your hardware:
GEAR drivers

Can't Burn CD with iTunes

Similar Messages

Maybe you are looking for