Can't burn CDs - can't find driver updates

Aaargh! It's happened again!!!
When I put a CD in, the CD is recognized as blank but when I try to burn the playlist, Itunes hesitates for about 30 seconds and then ejects the CD with no error message.
This happened about three months ago and I spent two days looking for driver updates and mindlessly uninstalling applications and it began working again. I am certain I am having some conflict with other software because my burner works fine with SonicStage with the same CDs. Does anyone know how to identify the offending software? I have scanned several posts with similar issues, but do not see anything in the past few days which applies.
My diagnostics are:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Gateway E-4100
iTunes 7.1.1.5
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
Video Controller (VGA Compatible)
NVIDIA GeForce 6800
NVIDIA GeForce4 Ti 4200 (Microsoft Corporation)
Connected Device Information:
DiskDrive, ST3160812A, Bus Type ATA, Bus Address [0,0]
CDROM, HL-DT-ST DVDRAM GMA-4020B, Bus Type ATA, Bus Address [1,0]
CDROM, JLMS XJ-HD166S, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
D: JLMS XJ-HD166S, Rev DGS3
Audio CD in drive.
Found 14 songs on CD, playing time 47:42 on CDROM media.
Track 1, start time 00:02:00
Track 2, start time 03:00:65
Track 3, start time 06:23:00
Track 4, start time 10:34:72
Track 5, start time 12:18:40
Track 6, start time 15:35:57
Track 7, start time 18:35:42
Track 8, start time 21:04:62
Track 9, start time 24:09:32
Track 10, start time 27:54:65
Track 11, start time 31:57:02
Track 12, start time 34:21:27
Track 13, start time 37:23:25
Track 14, start time 44:53:65
Audio CD reading succeeded.
Get drive speed succeeded.
E: HL-DT-ST DVDRAM GMA-4020B, Rev A105
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 12.
The drive CDRW speeds are: 4 8.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.

There was a post May 1 with lots of good information however it was not helpful for me. I tried what was suggested and still can not burn CD. Apple support was not able to help either. I get to install blank CD>>> incert the CD and nothing happens. No error message. I don't even know what to look for or where to begin. This just started happinging when I updated with the lastest version of iTunes.
Got any helpful suggestions... please post details

Similar Messages

  • Can't find driver update for Webshuttle DSL modem - for Mac OS 10.4

    Hi!
    I recently updated to Mac OS 10.4.8 and discovered my DSL modem no longer functioned. I use the Webshuttle DSL from Hermstedt. I went online to hermstedt.com to download the driver for Mac OS 10.4 - I was using Mac OS 10.3 prior to the upgrade, and found that there are no longer drivers to download as the company has gone bust. Can anyone advise me on how to get the driver for Webshuttle so I can use the modem on my Mac OS 10.4.8 system?
    Hope you can help.
    Regards,
    Veronica

    I assume that's a USB Modem?
    If so, I have many differen't brands where the drivers from 10.2.x and 10.3.x still work in 10.4.10, but the original installs had to be uninstalled, or hand remove all files, then reinstall, reboot seems to work.
    No idea if that'll work for you.

  • Can't find driver for SB0

    Hello,
    I have an Audigy card (SB0230), and I can't find a driver for it. I tried few solutions, and here are what I done already:
    - I tried to install the newest driver from creative.com for Audigy board, but installer don't recognized my card and stopped.
    - I installed KX Audio driver. Everything went ok, installer recognized my card and I had sound, but I bought this card not only for music, but for games too, so lack of EAX led me to uninstall this driver.
    - I tried from the other side with the official driver. I unpacked it with WinRAR, installed it from Device Manager. It told me that this driver is not compatible with my device, but I ignored it and after restart I heard sound Unfortunetly, as for now I don't have any control over the card. Even Realtek has a control panel, so I figured out, that I must run installer to do something with my card, than just set volume :P Am I right? Where can I find driver for it's
    I have Windows Vista, but in XP everything was the same (and I used KX in XP).

    For Vista try this one,
    http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=2502

  • Can not find driver for Thinkpad T500

    I can not find driver for Thinkpad T500? Could you please help me?
    Moderator edit: Matched Subject to content.

    Thanks to the folks at Kepware. I was able to get this working for CompactLogix L32E.
    Step 1: In NI OPC Server Create a new Channel. Channel Name can be whatever you want.
    Step 2: Device driver will be ControlLogix Ethernet.  You can also enable diagnostics if you want.
    Step 3: Network adapter. I used default setting.
    Step 4: Write only latest values.  Duty at 10. ( These are default settings and are recommended.)
    Step 5: Finish new Channel setup
    Step 6: Click on Icon to create new device
    Step 7: Device Name can be whatever you chose.
    Step 8: Select Device Model in this case CompactLogix 5300
    Step 9: Device ID For me was IP Address XXX.XXX.XXX.XXX,1,0    (Note the 1 directs path to backplane. The 0 to the slot where processor is)
    Step 9: Device timing.  Leave at defaults.
    Step 10: Auto demotion leave unchecked.
    Step 11: Leave at defaults Do not generate on startup Delete on create and allow subgroups
    Step 12: Port and watchdogs at default settings
    Step 13: Project options leave at default. (In my case I changed to short as that is what most of my tags were)
    Step 14: Create tagname from device.
    Step 14: Finish Device setup.
    You now have two options. 
    Option 1: Start creating tags as you need them. (This is what I did)
    Option 2: Right Click newly created device and select properities.  Then select database creation and click auto create.
    Go To Lookout  and create new driver. 
    Select OPC Client
    Server name will be from dropdown menu. National Instruments:NIOPCServers
    Click okay
    You should be done and smiling. 

  • 10.5.5 update hangs panic msg. can not find driver for 7,2,5 system dualG5

    Down loaded 10.5.5 and ran it, loaded software and rebooted on G5 Dual 2Ghz system.
    10.5.4 worked no problem.
    Got back panic saying can not find driver for platform 7,2,5
    Anybody know how to back this update back to 10.5.4?
    or fix this to get 10.5.5 working.
    Thanks

    I am experiencing something very similar. After downloading the update, it closes all app's and attempts to install. I've been looking at a stalled progress bar for 30 minutes.... No error messages yet, but my prospects don't look good. Any advice?

  • HT1688 I updated itunes on my computer and now it says I need to update my phone- where can I find the update for the iphone?

    I updated itunes on my computer and now it says I need to update it on my iphone, or it won't work.  Where can I find the update?

    iTunes store: Transferring purchases from your iOS device or iPod to a computer
    Hope this helps.

  • App Store can't find any updates? No response from server.

    When I open iTunes I get a message saying "a new version of iTunes is ready for download". But when I click download/update it takes me to App Store where it can't find any updates. It keeps saying "Didn't get a response from the Software Update server (198.168.1.7)." every time I check for updates. Please help! I know there is a new update for iTunes and I can't update it.
    Please if you have any suggestions or ideas or explanations please let me know! I would greatly appreciate it!!!
    Thanks in advance.

    The system is configured to download updates from a private server, not from Apple. That server isn't working or isn't reachable. If you're bound to a network directory server, or if you're behind a firewall that doesn't allow downloading updates directly from Apple, your network administrator has to solve the problem. Otherwise, proceed as follows.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/com.apple.SoftwareUpdate.plist
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    In the Finder, select
              Go ▹ Go to Folder…
    from the menu bar. Paste into the box that opens (command-V), then press return.
    A Finder window will open with a file selected. Delete the selected file. You may be prompted for your administrator password. Restart the computer and try Software Update again.

  • Why I can't find the update menu in the Help menu for Photoshop Elements 10 on my Mac?

    Why I can't find the update menu in the Help menu for Photoshop Elements 10 on my Mac?
    I can't manually update the saw plug-in either. I am stuck!

    Authorization and Deauthorization
    Macs:  iTunes Store- About authorization and deauthorization.
    Windows: How to Authorize or Deauthorize iTunes | PCWorld.
    In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
    More On De-authorizing Computers (contributed by user John Galt)
    You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
      1. Open iTunes on a computer
      2. From the Store menu, select "View my Account..."
      3. Sign in with your Apple ID and password.
      4. Under "Computer Authorizations" select "De-authorize All".
      5. Authorize each computer you still have, as you may require.
    You may only do this once per year.
    After you "de-authorize all" your authorized computers, re-authorize each one as required.
    If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

  • Where can I find the update to fix the problem with the trackpad acting up?

    My trackpad has been acting up lately, with the arrow going everywhere by itself, and not being able to control it. I googled and found that it's a common problem for the 2011 Macbook Pros, and that Apple had released an update to fix the problem. Where can I find the update on the Apple site?

    If an update is available, it will appear when you select Apple menu > Software Update...
    But you should also read this support article:
    Portables and Magic Trackpad: Jumpy or erratic trackpad operation

  • Where can I find the update for my mac mini, OS X v10.8?

    Hi. I'm tryin to connect my mac mini with my new HP printer.
    The softwere won't start because it says that I don't have de update the softwere needs, which is OS X v10.8 or later.
    I have OS X v10.7.5. I have found, on apple's site, OS X v10.8.1 and OS X v10.8.2.
    But my mac won't accept to run any of them. It just says that I need OS X v10.8 to run the other updates.
    Where can I find the update that I need? I can't find it here on apple's site.
    Please! I'we been sitting with thit sh*t for a couple of hous now.
    Thankful for your help asap
    xo Mickis, Stockholm Sweden.

    Apple - OS X Mountain Lion - Read the technical specifications.
    Macs that can be upgraded to OS X Mountain Lion
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Xserve (Early 2009)

  • I'd like to update the ISO 4.2.1 on an old iPod Touch to ISO 7.  Can't find "Software Update" option under General Setting.  Where might I look for the option to slightly upgrade the ISO for this device?

    I'd like to update the ISO 4.2.1 on an old iPod Touch to ISO 7.  Can't find "Software Update" option under General Setting.  Where might I look for the option to slightly upgrade the ISO for this device?

    You likely have a 2G iPod and those can go higher than 4.2.1
    A 3G can go to 5.1.1
    IA 4G, with cameras can go to iOS 6.1.6.
    The 5G, also with cameras can go to iOS 8
    To update
    The Settings>General>Software Update comes with iOS 5 and later.
    Connect the iPod to your computer and update via iTunes as far as your iPod model allows
    iOS: How to update your iPhone, iPad, or iPod touch
    - A 2G to 4.2.1. Requires iTunes version 10 or higher. If a Mac it requires OSX 10.5.8 or later.
    - A 3G to 5.1.1  Requires iTunes version 10.5 or later
    - A 4G to 6.1.6  Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
    - A 5G to iOS 8 Requires iTunes 11.4 or later if you update via iTunes
    Identifying iPod models                                                         

  • My IPAD has not been used in almost two years and I tried to update software and under general settings I can not find Software Updates where it should be, help please!

    My IPAD has not been used in almost two.... I have tried to update software but when go to Settings, General I can not find Software Updates where it should be between About and Sounds, what can I do? Nothing has been updated, tried through ITunes on PC and said I needed to update to ITunes 10.1 and can't do this either, please help me.  Can't find ICloud either!

    Make sure iTune is up to date.
    http://i1224.photobucket.com/albums/ee374/Diavonex/715e7281162a061530f6b86418036 0f0_zpscfe7d4c8.jpg

  • Where can I find ipod updater so iTunes 10 will see my scrollwheel 10G ipod?

    Where can I find ipod updater so iTunes 10 will see my scrollwheel 10G ipod?
    I used it exclusively on an old iBook. (POS from the beginning - bad motherboard, replaced, went bad just out of warranty. So I use it for only certain things.)
    Now I want to load the scrollwheel ipod (also POS, bad motherboard where the headphones plug in, can't be repaired) from my iTunes 10 machine.
    iTunes 10 does not see the ipod with it's 1.2.6 software.   iTunes 7.5 sees it but will no longer update itself or the ipod.
    - my sig:  Whatever we're talking about, please don't tell me to buy a new one unless you're willing to pay for it.  Thanks.

    A "scrollwheel 10G" (10 GB) iPod may be 3rd gen...  If it's a 3rd gen iPod, the one with a "scrollwheel" and four "touch" buttons in a row between the screen and wheel (that glow orange), it will only work properly with a FireWire connection.  Although it has a dock connector, it does not charge over a USB connection.  If you Mac has a FireWire 800 port, you can use an adapter to connect to the old FireWire (400) docking cable.
    Mine still works perfectly (it's had a few battery replacements) with the latest iTunes and Mac OS X 10.7.4.  I think it has great sound...

  • I cal won't work with my new Snow Leopard OS and I can't find an updage, i cal won't work with my new Snow Leopard OS and I can't find an update, i cal won't work with my new Snow Leopard OS and I can't find an update

    I upgraded to Snow Leopard because I want to upgrade to Lion so that I can upgrade my IPad2 to IOS5! All sorts of problems with this - but one is that iCal won't work (I haven't completed upgrade to Lion yet) and I can't find an update to make Ical work with Snow Leopard.

    Oh and it also says:
    Missing component: /Library/Printers/Lexmark/Drivers/.Resources/5600-6600 Series Color 2.lut

  • I can't find software update in general icon in the setting, what can I do

    I can't find software update in general icon in the setting, what can I do

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
    How to Upgrade to iOS 7
    The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
    There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
    To upgrade using Wi-Fi:
    Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
        1.    Go into the iPad's Settings.
        2.    Locate and tap "General" from the menu on the left.
        3.    The second option from the top is "Software Update". Tap this to move into the update settings.
        4.    Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
        5.    Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
    To upgrade using iTunes:
    First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
    You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
    Now you are ready to begin the process:
        1.    If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
        2.    Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
        3.    After canceling the dialog box, iTunes should automatically sync with your iPad.
        4.    If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
        5.    After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
        6.    From the iPad screen, click on the Update button.
        7.    After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
        8.    After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
     Cheers, Tom

Maybe you are looking for