Can`t burn cds. Error 0x80020060

This is the error I get " 0x80020060 The device drained its buffer without burn underrun protection". What can I do here? I`m running Panther 0sx 10.3.9 on an emac.

Try burning the CD at a slower speed; this will decrease the rate at which the burner expects data, and makes a buffer underrun less likely to happen. This happens because a CD burner needs a continuous stream of data to burn the CD; if it has more data than it needs at a specific moment in time, the extra data is stored in the buffer.
(16715)

Similar Messages

  • Toonz help.........error 4000 can't burn cds

    I have tried everything! Installed itunes 6.0.3, upgraded firmware, windows update...still can't burn cds. Do I need to buy a new burner? Toonz help
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    NVIDIA AWRDACPI
    iTunes 6.0.3.5
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: PxHelp20 (2.0.0.0), Cdr4_xp (7.1.0.95),
    UpperFilters: Cdralw2k (7.1.0.95), pwd_2k (7.1.0.95), GEARAspiWDM (2.0.4.3),
    Video Driver: NVIDIA GeForce4 MX Integrated GPU\GeForce4 MX Integrated GPU
    Found aspi32 running.
    SCSI\DiskMaxtor6E040L0_________NAR6, Bus Type SCSI, Bus Address [0,0]
    USBSTOR\DiskWD_____1600JD_External101a, Bus Type USB
    SCSI\CdRomSAMSUNGCD-ROM_SC-148A_B402, Bus Type SCSI, Bus Address [1,0]
    SCSI\CdRomNEC____DVD_RW_ND-2500A1.0A, Bus Type SCSI, Bus Address [0,0]
    Current user is administrator.
    D: _NEC DVD_RW ND-2500A, Rev 1.0A
    Audio CD in drive.
    Found 14 songs on CD, playing time 56:46 on CDROM-XA media.
    Track 1, start time 00:02:00
    Track 2, start time 05:08:25
    Track 3, start time 08:07:62
    Track 4, start time 12:02:17
    Track 5, start time 17:01:02
    Track 6, start time 21:57:00
    Track 7, start time 25:53:25
    Track 8, start time 30:25:50
    Track 9, start time 33:31:17
    Track 10, start time 37:14:72
    Track 11, start time 40:17:65
    Track 12, start time 43:05:67
    Track 13, start time 47:14:72
    Track 14, start time 51:44:07
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 16 20 24 32.
    The drive CDRW speeds are: 4 8 16 20.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.
    E: SAMSUNG CD-ROM SC-148A, Rev B402
    Drive is empty.
    The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive D: _NEC DVD_RW ND-2500A on CDR media at speed 4X.

    I think I fixed it...I went under My Computer, then right clicked on the cd drive that I used to burn, go to properties, went under the auto play tab, selected the action to perform button for each individual category(dvd, blank cd, music cd) selected the no action icon for each category. Then went to the recording tab and unselected the enable recording selection. Now I can burn every time! If this fixes it for anyone else let me know!
    Jr

  • Can't Burn CDs (emachines T3830) - used to be able to

    All of a sudden, I can't burn CDs. I was able to up until recently. I installed the Acura TTS software to allow me use my IPOD in a new car and was wondering if anyone knew if this interfered with the burn function. Orif the CD diagnostics indicate some other problem?
    Here are the diagnostics:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    GATEWA SR84510A
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller\Intel(R) 82845G/GL/GE/PE/GV Graphics Controller
    IDE\DiskWDCWD800BB-22JHA0_____________________05.01C05, Bus Type ATA, Bus Address [0,0]
    USBSTOR\DiskeM_____Bay_Reader_____1.00, Bus Type USB
    USBSTOR\DiskeM_____Bay_Reader_____1.01, Bus Type USB
    USBSTOR\DiskeM_____Bay_Reader_____1.02, Bus Type USB
    USBSTOR\DiskeM_____Bay_Reader_____1.03, Bus Type USB
    IDE\CdRomHL-DT-STRW/DVD_GCC-4481B_______________1.00___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    E: HL-DT-ST RW/DVD GCC-4481B, Rev 1.00
    Audio CD in drive.
    Found 10 songs on CD, playing time 36:20 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:25:30
    Track 3, start time 08:09:17
    Track 4, start time 11:45:27
    Track 5, start time 14:54:67
    Track 6, start time 18:08:62
    Track 7, start time 22:04:47
    Track 8, start time 25:36:07
    Track 9, start time 28:27:65
    Track 10, start time 32:19:45
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 10 16 24 32 40 48.
    The drive CDRW speeds are: 4.
    The last failed audio CD burn had error code 4450(0x00001162). It happened on drive E: HL-DT-ST RW/DVD GCC-4481B on CDR media at speed 4X.

    Please assist. Am an English teacher and thus a total technophobe - so please keep it simple!
    Using iTunes to burn CDs has become increasingly impossible; I keep getting Error 4310 messages. I've used a CD-ROM cleaner disc to check there's no prob with the laser, but that's made no difference.
    I ran CD Diagnostics and...
    TriGem Computer, Inc. Emachines
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: Cdr4_xp (5.1.0.209),
    UpperFilters: Cdralw2k (5.1.0.209), GEARAspiWDM (2.0.4.3),
    Video Driver: Intel(R) 82810 Graphics Controller\Intel(R) 82810 Graphics Controller
    Found aspi32 running.
    IDE\DiskSAMSUNGSV2042H________________________PK100-19, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomSAMSUNGCDRW/DVD_SM-308B________________T100___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: SAMSUNG CDRW/DVD SM-308B, Rev T100
    Audio CD in drive.
    Found 20 songs on CD, playing time 73:59 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:38:00
    Track 3, start time 07:13:15
    Track 4, start time 11:03:30
    Track 5, start time 13:51:32
    Track 6, start time 17:22:30
    Track 7, start time 20:54:65
    Track 8, start time 24:51:72
    Track 9, start time 28:53:55
    Track 10, start time 32:47:40
    Track 11, start time 36:36:07
    Track 12, start time 40:03:10
    Track 13, start time 44:03:72
    Track 14, start time 47:44:67
    Track 15, start time 51:35:60
    Track 16, start time 55:36:50
    Track 17, start time 59:25:52
    Track 18, start time 63:14:25
    Track 19, start time 66:44:37
    Track 20, start time 70:02:07
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 2 4 8.
    The drive CDRW speeds are: 2 4 8.
    The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive D: SAMSUNG CDRW/DVD SM-308B on CDR media at speed 8X.
    Any sage advice, folks?
    Cheers
    Beldo

  • Can't burn CDs in iTunes

    I can't burn CDs in iTunes. I get "The attempt to burn a disc failed. An unknown error occurred (4261). I have tried to reduce the speed - didn't work. I have never had a problem before - but after I downloaded the new version of iTunes, I can't burn. I know the burner works because I can burn using NERO. Please help!

    I'm assuming you have already resolved the issue, but if you have not, I would recommend that you uninstall iTunes completely and remove anything related to Apple on your computer including Quicktime. See this post for what you need to remove: http://mismike.blogspot.com/2008/03/itunes-wont-close-on-windows-xp-sp2.html. Good luck.
    -NKA

  • Device filter Problems, can't burn cds in iTunes, Blank CDs appear to have

    Problem was first noticed because I can't burn CDs in iTunes.
    The problem is that all blank CDs show that they have no space on them available. If I look at the properties of a blank CD, they show 0 bytes used, 0 bytes free and 0 bytes available.
    By removing the upperfilters and lowerfilters in the registry, (accoring to the Microsoft prescribed method for this problem found at http://support.microsoft.com/kb/314060) the problem is solved for my whole sytem except for iTunes. iTunes then tells me that "the registry settings used by iTunes drivers for importing and burning CDs and DVDs are missing. ... Please reinstall iTunes."
    I reinstall or repair iTunes and then iTunes opens fine but I can't burn with iTunes or any other program since I am back to all blank CDs showing there is no space available.
    The iTunes toubleshooting Fac found at http://docs.info.apple.com/article.html?artnum=302976 has been tried also and does not change the problem of blank CDs having no space available.
    Here are the cd diagnostics: (Run with my whole system working except iTunes burner)
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Gateway ESSEX2
    iTunes 7.1.1.5
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    Current user is an administrator.
    Video Display Information:
    NVIDIA GeForce4 MX 440 (Gateway)
    NVIDIA GeForce FX 5200 (Gateway)
    Connected Device Information:
    DiskDrive, WDC WD2500JB-53EVA0, Bus Type ATA, Bus Address [0,0]
    CDROM, HL-DT-ST DVDRAM GMA-4020B, Bus Type ATA, Bus Address [1,0]
    CDROM, JLMS XJ-HD166S, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
    Gateway Essex2   Windows XP  

    Same problem here!!! This is driving me crazy. Glad to see it isn't me not knowing what I am doing when a couple of months ago I had no problems now as of last night after trying to burn to a CD I had the exact same issue.

  • Can't burn CDs (but can burn DVDs!!) Satellite U400-20v

    hi,
    I have a satellite u400-20v. There was no problem at first to read or burn a CD or DVD but after I setup windows 7 ultimate. my cd rom now can read both CDs and DVDs and can burn DVDs but can't burn CDs (data or audio). The burner gives me an error msg as soon as it begins writing the  cd. My optical drive is called Mat**bleep**a DVD-RAM UJ862AS ATA device (at the device manger). 
    Please help
    Thanx

    iTunes can be a bit flaky on 64 bit Vista since it's not supported but it has been known to work.
    Try updating your CD/DVD drivers here -> http://www.gearsoftware.com/support/drivers.cfm
    Also, make sure the your other firmware & drivers are up to date.

  • How can I burn CDs that will play on my car stereo CD player?

    How can I burn CDs that will play on my car stereo CD player?

    Make sure the format when you burn your playlist is one your car's CD player will recognize. Typically mp3 songs are readable now but when in doubt, burn an audio cd. Yes, you will get less songs per cd (as compared to mp3 formatted one) but you are guaranteed the cd will work in any place.  Most cars have it written on the radio somewhere what formats it can read for CDs.. Good luck!

  • Error 4251-can't burn cds, can you help?

    Here are my diagnostics-please help this is very frustrating!!
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Dell Computer Corporation Dimension 4600i
    iTunes 7.4.3.1
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), sscdbhk5 (1.0.0.1), MxlW2k (1.1.0.116),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    Intel(R) 82865G Graphics Controller
    Connected Device Information:
    Disk drive, ST340014A, Bus Type ATA, Bus Address [0,0]
    CD-ROM Drive, SAMSUNG CD-R/RW SW-252S, Bus Type ATA, Bus Address [1,0]
    CD-ROM Drive, SAMSUNG DVD-ROM SD-616E, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    D: SAMSUNG DVD-ROM SD-616E, Rev F501
    Drive is empty.
    E: SAMSUNG CD-R/RW SW-252S, Rev R902
    Audio CD in drive.
    Found 16 songs on CD, playing time 58:40 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:52:37
    Track 3, start time 07:37:30
    Track 4, start time 11:32:55
    Track 5, start time 14:42:35
    Track 6, start time 19:20:63
    Track 7, start time 22:56:61
    Track 8, start time 26:52:62
    Track 9, start time 30:09:06
    Track 10, start time 35:04:12
    Track 11, start time 38:19:18
    Track 12, start time 41:30:43
    Track 13, start time 44:37:41
    Track 14, start time 47:43:71
    Track 15, start time 50:56:07
    Track 16, start time 54:30:24
    Audio CD reading succeeded (check for old firmware).
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 16 24 32 40 48.
    The drive CDRW speeds are: 4.
    Force Optical Power Calibration before burn is turned on in the preferences.
    The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: SAMSUNG CD-R/RW SW-252S on CDR media at speed 4X.

    I am getting sam error. If you get an answer please let me know. I can burn from musicmatch but not itunes!

  • Can't burn CDs - can't find driver updates

    Aaargh! It's happened again!!!
    When I put a CD in, the CD is recognized as blank but when I try to burn the playlist, Itunes hesitates for about 30 seconds and then ejects the CD with no error message.
    This happened about three months ago and I spent two days looking for driver updates and mindlessly uninstalling applications and it began working again. I am certain I am having some conflict with other software because my burner works fine with SonicStage with the same CDs. Does anyone know how to identify the offending software? I have scanned several posts with similar issues, but do not see anything in the past few days which applies.
    My diagnostics are:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Gateway E-4100
    iTunes 7.1.1.5
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    Video Controller (VGA Compatible)
    NVIDIA GeForce 6800
    NVIDIA GeForce4 Ti 4200 (Microsoft Corporation)
    Connected Device Information:
    DiskDrive, ST3160812A, Bus Type ATA, Bus Address [0,0]
    CDROM, HL-DT-ST DVDRAM GMA-4020B, Bus Type ATA, Bus Address [1,0]
    CDROM, JLMS XJ-HD166S, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    D: JLMS XJ-HD166S, Rev DGS3
    Audio CD in drive.
    Found 14 songs on CD, playing time 47:42 on CDROM media.
    Track 1, start time 00:02:00
    Track 2, start time 03:00:65
    Track 3, start time 06:23:00
    Track 4, start time 10:34:72
    Track 5, start time 12:18:40
    Track 6, start time 15:35:57
    Track 7, start time 18:35:42
    Track 8, start time 21:04:62
    Track 9, start time 24:09:32
    Track 10, start time 27:54:65
    Track 11, start time 31:57:02
    Track 12, start time 34:21:27
    Track 13, start time 37:23:25
    Track 14, start time 44:53:65
    Audio CD reading succeeded.
    Get drive speed succeeded.
    E: HL-DT-ST DVDRAM GMA-4020B, Rev A105
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 12.
    The drive CDRW speeds are: 4 8.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.

    There was a post May 1 with lots of good information however it was not helpful for me. I tried what was suggested and still can not burn CD. Apple support was not able to help either. I get to install blank CD>>> incert the CD and nothing happens. No error message. I don't even know what to look for or where to begin. This just started happinging when I updated with the lastest version of iTunes.
    Got any helpful suggestions... please post details

  • I can't burn CDs in 7.0 with any consistency - most times, failure

    Every time I think I have the problem solved (uninstall and reinstall iTunes, reduce burn speed), I go back to not being able to burn a CD. I've probably had a dozen "bad" burns (diagnostic, below), and 4 successful ones. I can't figure out what the difference is. I absolutley HATE the new iTunes and I wish Apple would pay attention to all of us out here having this troubles, and send out a fix of some sort.
    Help, please!!!!!
    Here is my diagnostic:
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Computer Corporation Dimension 2400
    iTunes 7.0.1.8
    CD Driver 2.0.6.0
    CD Driver DLL 2.0.6.0
    LowerFilters: AFS2K (3.1.21.0), PXHELP20 (2.0.0.0), CDR4_XP (6.2.0.110),
    UpperFilters: GEARAspiWDM (2.0.6.0), Cdralw2k (6.2.0.110), pwd_2k (6.2.0.110),
    Video Driver: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller\Intel(R) 82845G /GL/GE/PE/GV Controller
    IDE\DiskWDCWD1600JB-22GVA0____________________08.02D08, Bus Type ATA, Bus Address [0,0]
    IDE\DiskWDCWD1600JB-75GVC0____________________08.02D08, Bus Type ATA, Bus Address [1,0]
    IDE\CdRomHL-DT-STCD-ROM_GCR-8481B_______________1.06___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomHL-DT-STCD-RW_GCE-8483B________________B105___, Bus Type ATA, Bus Address [1,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is an administrator.
    F: HL-DT-ST CD-ROM GCR-8481B, Rev 1.06
    Drive is empty.
    G: HL-DT-ST CD-RW GCE-8483B, Rev B105
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 48.
    The drive CDRW speeds are: 48 0 0.
    The last failed audio CD burn had error code -128(0xffffff80). It happened on drive G: HL-DT-ST CD-RW GCE-8483B on CDR media at speed 0X.
    Regards,
    Mike

    Hi,
    I have not yet done as you've requested, but I have nevertheless successfully burned three cds in a row, after a series of one failure, one sucess and one failure. after the second failure, i opened the playlist that I wanted to burn, closed iTunes, re-opened iTunes (which opened in the playlist that i wanted), put in a blank CD-R and immediately burned the cd without further action. i followed this process with the three different playlists that i wanted to burn, and for whatever reason, i was able to burn the three cds. the first time i had the failure this evening, i changed the burn speed, and it burned the next one. but then i tried to burn a second playlist, and i had a failure. so, that's when i tried the "open" and "close" iTunes process above. i have no idea whether that had anything to do with my success, or if i just got "lucky". maybe next time, i'll chant and whisper some incantations first...
    thanks for your help. i see that you have been responding to a lot of folks. i'm just not sure what those updates are, and i have replaced my harddrive since i bought the computer, so i wasn't sure if dell had my proper information still, which is why i didn't follow your advice (at least at this point).
    regards,
    mike

  • Can't burn CDs in iTunes anymore

    The last few times I've tried to burn a CD in iTunes, I've been unable to. I assemble a playlist and click the burn button, and it gets as far as the "checking playlist" message, then freezes up. I ran the diagnostic test, and I'll paste my results below. I'm able to burn CDs with other programs, but I want to use iTunes because that's where all my music is.
    I've got the newest version of iTunes and am running Windows XP. I'm using Verbatim CD-Rs, which I've used for quite awhile and I've never had trouble before. I'm hoping someone here can help me out, because after spending an hour or more reading articles in the support section of the site, I'm no closer to a fix. Thanks in advance for any help.
    iTunes 7.0.1.8
    CD Driver 2.0.6.0
    CD Driver DLL 2.0.6.0
    LowerFilters: MxlW2k (1.0.1.109), Cdr4_xp (7.5.0.50),
    UpperFilters: pwd_2k (5.1.0.105), GEARAspiWDM (2.0.6.0), Cdralw2k (7.5.0.50),
    Video Driver: 32MB ATI Rage 128 Ultra\1002-5446-22
    IDE\DiskST340016A______________________________3.10___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomLITE-ONLTR-24102M______________________4DS2___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is an administrator.
    D: LITE-ON LTR-24102M, Rev 4DS2
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 2 4 8 10 12 16 20 24.
    The drive CDRW speeds are: 2 4.
    The last failed audio CD burn had error code -128(0xffffff80). It happened on drive D: LITE-ON LTR-24102M on CDR media at speed 0X.

    1)I do have Roxio Easy CD Creator on my computer, but I use that for copying CDs and making data CDs. I'm pretty sure I lost the installation CD when I moved a few years ago, so I really don't want to uninstall it.
    2) I went into the device manager in my control panel in XP and ran an update search for the drivers for my ATA and IDE controllers. It did find an update for the ATA driver and I installed it and restarted my computer, but it didn't change anything. I did a similar update driver search for my CD drive, and it didn't find any updates. I went to Dell's website and did a search for "firmware update" and it gave me way too many results. When I did the same search with my computer model name in it, it didn't give me any. I've had this computer for nearly 5 years, so I'm not sure how to track down any updates I might need.
    3) I tried a Maxell CD and had the same results
    4) I tried resetting the burning speed to both 8x and 4x and it still froze up right after "checking playlist"
    Thanks for your help. I really appreciate it.

  • Burning cds - error 4280

    I am having problems burning cds with itunes. I've tried various suggestions, but nothing has worked. I thought I had updated drivers, firmware etc but would appreciate any advice you can give. Diagnostics is below:
    Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
    Sony Corporation VGN-AR71E
    iTunes 10.1.2.17
    QuickTime 7.6.9
    FairPlay 1.10.24
    Apple Application Support 1.4.1
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.3.1.3
    Apple Mobile Device Driver 1.52.0.0
    Bonjour 2.0.3.0 (214.3)
    Gracenote SDK 1.8.2.457
    Gracenote MusicID 1.8.2.89
    Gracenote Submit 1.8.2.123
    Gracenote DSP 1.8.2.34
    iTunes Serial Number E2006393C388D756
    Current user is an administrator.
    The current local date and time is 2011-02-21 23:51:39.
    iTunes is not running in safe mode.
    WebKit-accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce 8400M GT
    ** External Plug-ins Information **
    No external plug-ins installed.
    Genius ID: eb5ffd08bd51791ccbeec074698c75d1
    iPodService 10.1.2.17 is currently running.
    iTunesHelper 10.1.2.17 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    ** CD/DVD Drive Tests **
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.2.0.1),
    F: MATSHITA DVD-RAM UJ870QJ, Rev 1.01
    Audio CD in drive.
    Found 16 songs on CD, playing time 64:05 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 05:17:15
    Track 3, start time 09:33:07
    Track 4, start time 14:12:64
    Track 5, start time 18:09:47
    Track 6, start time 21:01:12
    Track 7, start time 24:12:57
    Track 8, start time 28:26:32
    Track 9, start time 32:53:42
    Track 10, start time 37:38:52
    Track 11, start time 41:29:31
    Track 12, start time 44:50:10
    Track 13, start time 49:18:20
    Track 14, start time 54:19:50
    Track 15, start time 57:13:67
    Track 16, start time 62:39:33
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 12 16 24.
    The drive CDRW speeds are: 4.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.
    The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive F: MATSHITA DVD-RAM UJ870QJ on CDRW media at speed 4X.

    Hi,
    Does this help?
    http://support.apple.com/kb/TA38101
    Best wishes
    John M

  • APPLE -- are you listening? We can't burn CDs!

    I have spent a lot of hours trying to burn an audio CD, to no avail. I just wondered if Apple had considered that people will refuse to buy music from iTunes if we can't burn audio CDs.
    I'm desperately needing to burn ONE song onto a CD. I bought it from iTunes, but now I have to go and find the CD at a store somewhere. Do you suppose Apple will give me my money back?
    This is really frustrating!!!
    (Oh,I've checked every help system Apple provides, in case you're wondering. Nothing works.)
    IBM Thinkpad   Windows XP  

    Did it all. Updated windows. Uninstalled iTunes and Quick Time. Cleaned out temp files, etc. Reinstalled iTunes and Quick Time. Changed burn speed to 4x. Used new discs of a different brand.
    It ACTS like it is writing... goes through each song as if it is burning the CD. CD drive runs. Ends up showing the "finished" CD in the pane on the left in iTunes (just above the playlists.
    However... the disc is still empty! Nothing on it when you look at it in "My Computer" or "iTunes" or Windows Media player. This is downright depressing. There is so much music... so little time!! Help!
    I can import purchased CDs just fine, by the way.
    Oh... and thanks for sticking with me on this. I know there are probably a fair number of people with the same problems...
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    IBM 2686DHU
    iTunes 7.0.1.8
    CD Driver 2.0.6.0
    CD Driver DLL 2.0.6.0
    LowerFilters: AFS2K (3.1.21.0), PXHELP20 (2.0.0.0), DRVMCDB (1.0.0.1), SSCDBHK5 (1.0.0.1),
    UpperFilters: GEARAspiWDM (2.0.6.0),
    Video Driver: ATI MOBILITY RADEON X300\ATI MOBILITY RADEON X300
    IDE\DiskFUJITSUMHV2060AH______________________00840096, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomHL-DT-STRW/DVD_GCC-4242N_______________0J04___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is an administrator.
    D: HL-DT-ST RW/DVD GCC-4242N, Rev 0J04
    Drive is empty.
    The last failed audio CD burn had error code 4450(0x00001162). It happened on drive D: HL-DT-ST RW/DVD GCC-4242N on CDR media at speed 4X.

  • Can't burn cds but I can burn dvds?

    I cant seem to burn cds anymore but I can burn dvds I have tried several different brands but nothing seems to work are there different lazers for cd and dvd?

    Yes, in many drives there are different lasers for CDs and DVDs. It is not uncommon to have one type fail and the other keep working fine.
    Be sure the media you are using are the correct speed range for the drive capabilities. For example, 8x media will not be correctly recognized by a 2x-capable drive. It may report "calibration error" or tell you the capacity of the media is ridiculously large or small, or ask you to erase non-erasable media.

  • Can't burn playlist, error 2321

    When I try to burn a playlist I get error message 2321. Itunes support page suggested downloading new firmware for the drive which I have already done and I still can not burn anything from itunes to CD. Any suggestions??

    Greetings akite2high,
    If you are having an issue with being unable to burn a CD using iTunes on your Windows computer, I would suggest that you troubleshoot using the steps in this article - 
    Can't burn a CD in iTunes for Windows - Apple Support
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • Can't Burn Disc Error Code -54

    What is going on? can anyone help? Every time i try to burn something in toast it tells me it can't burn the disc because i don't have the proper access permissions and displays error code -54 afterwards...

    -54 is a Permissions error that's right ...
    What are you trying to copy/burn ?
    What version of Toast are you running ?
    Remove the DivX QuickTime Plug-In and try burning again as it can mess up some burns ...

Maybe you are looking for

  • Issue in creating a Decriptive Flexfield(DFF)

    Hi, I am creating a descriptive flexfield region in one of my custom OA Framework pages by following the steps mentioned the developer guide but the context field is not displayed, even after setting 'Display Context Field' property as True. Should i

  • Create pdf from html, how to adjust page size

    I have a large html file that I need to convert to a pdf. I am able to open the html in acrobat and save as pdf, but I cannot find where to adjust the page size. When I save the html in acrobat, the saved file is still a single page, but when I open

  • Latest flex sdk for Flash Builder 4

    HI, We bought Flash Builder 4 Premium and installed it. Now I want to use the latest flex sdk to use with it (I am working on a project using TLF 2). What is the version I should install, is it sdk 4.1 or 4.5(Hero). In Flex 4.1 there are about three

  • Playlist order for multiple albums incorrect

    I've been trying to get this to work for a while and it just doesn't seem to work correctly. I have an educational program that is on 6 CDs with 7-12 tracks per CD. When I put all of them into a single playlist and make that playlist the only thing t

  • Keep photos in the same order that they appear in an iPhoto album?

    I am uploading photos from an iPhoto album to Google+.  I want to keep the photos in the same order that they are appear in the album, but the order is rearranged.  ANy idea on how to keep photos in the same order? Thanks.