Can't burn CDs in itunes 7.4.2

Ever since I downloaded the latest iTunes, I can't burn disks. It writes the tracks and when it starts burning the first song, it just hangs there and nothing happens. I burned a cd using iphoto and it worked. can't find an answer anywhere. I've killed 5 CDs! HELP!

Good luck. The lesson I learned is 7.3 *****. Apple has not addressed this documented problem noted in this forum starting in June with the release of itunes 7.3 . I have also burned cd's now using toast. Unfortunately when you open that cd in itunes, the tracks are not listed as real names, rather track 1 and so on.
I have reverted to 7.2, but still cannot burn a cd, and I will not upgrade for a long time until Apple fixes it. I even started in 'safe mode' and tried to burn, no luck. I then installed 7.2 in 'safe mode' and it did not help. Search prior posts for how to revert to 7.2, it's stable.
Frustrated.

Similar Messages

Can't burn CDs in iTunes

I can't burn CDs in iTunes. I get "The attempt to burn a disc failed. An unknown error occurred (4261). I have tried to reduce the speed - didn't work. I have never had a problem before - but after I downloaded the new version of iTunes, I can't burn. I know the burner works because I can burn using NERO. Please help!

I'm assuming you have already resolved the issue, but if you have not, I would recommend that you uninstall iTunes completely and remove anything related to Apple on your computer including Quicktime. See this post for what you need to remove: http://mismike.blogspot.com/2008/03/itunes-wont-close-on-windows-xp-sp2.html. Good luck.
-NKA

Device filter Problems, can't burn cds in iTunes, Blank CDs appear to have

Problem was first noticed because I can't burn CDs in iTunes.
The problem is that all blank CDs show that they have no space on them available. If I look at the properties of a blank CD, they show 0 bytes used, 0 bytes free and 0 bytes available.
By removing the upperfilters and lowerfilters in the registry, (accoring to the Microsoft prescribed method for this problem found at http://support.microsoft.com/kb/314060) the problem is solved for my whole sytem except for iTunes. iTunes then tells me that "the registry settings used by iTunes drivers for importing and burning CDs and DVDs are missing. ... Please reinstall iTunes."
I reinstall or repair iTunes and then iTunes opens fine but I can't burn with iTunes or any other program since I am back to all blank CDs showing there is no space available.
The iTunes toubleshooting Fac found at http://docs.info.apple.com/article.html?artnum=302976 has been tried also and does not change the problem of blank CDs having no space available.
Here are the cd diagnostics: (Run with my whole system working except iTunes burner)
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Gateway ESSEX2
iTunes 7.1.1.5
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Current user is an administrator.
Video Display Information:
NVIDIA GeForce4 MX 440 (Gateway)
NVIDIA GeForce FX 5200 (Gateway)
Connected Device Information:
DiskDrive, WDC WD2500JB-53EVA0, Bus Type ATA, Bus Address [0,0]
CDROM, HL-DT-ST DVDRAM GMA-4020B, Bus Type ATA, Bus Address [1,0]
CDROM, JLMS XJ-HD166S, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
Gateway Essex2 Windows XP

Same problem here!!! This is driving me crazy. Glad to see it isn't me not knowing what I am doing when a couple of months ago I had no problems now as of last night after trying to burn to a CD I had the exact same issue.

Can't burn CDs in iTunes anymore

The last few times I've tried to burn a CD in iTunes, I've been unable to. I assemble a playlist and click the burn button, and it gets as far as the "checking playlist" message, then freezes up. I ran the diagnostic test, and I'll paste my results below. I'm able to burn CDs with other programs, but I want to use iTunes because that's where all my music is.
I've got the newest version of iTunes and am running Windows XP. I'm using Verbatim CD-Rs, which I've used for quite awhile and I've never had trouble before. I'm hoping someone here can help me out, because after spending an hour or more reading articles in the support section of the site, I'm no closer to a fix. Thanks in advance for any help.
iTunes 7.0.1.8
CD Driver 2.0.6.0
CD Driver DLL 2.0.6.0
LowerFilters: MxlW2k (1.0.1.109), Cdr4_xp (7.5.0.50),
UpperFilters: pwd_2k (5.1.0.105), GEARAspiWDM (2.0.6.0), Cdralw2k (7.5.0.50),
Video Driver: 32MB ATI Rage 128 Ultra\1002-5446-22
IDE\DiskST340016A______________________________3.10___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomLITE-ONLTR-24102M______________________4DS2___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
D: LITE-ON LTR-24102M, Rev 4DS2
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 2 4 8 10 12 16 20 24.
The drive CDRW speeds are: 2 4.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive D: LITE-ON LTR-24102M on CDR media at speed 0X.

1)I do have Roxio Easy CD Creator on my computer, but I use that for copying CDs and making data CDs. I'm pretty sure I lost the installation CD when I moved a few years ago, so I really don't want to uninstall it.
2) I went into the device manager in my control panel in XP and ran an update search for the drivers for my ATA and IDE controllers. It did find an update for the ATA driver and I installed it and restarted my computer, but it didn't change anything. I did a similar update driver search for my CD drive, and it didn't find any updates. I went to Dell's website and did a search for "firmware update" and it gave me way too many results. When I did the same search with my computer model name in it, it didn't give me any. I've had this computer for nearly 5 years, so I'm not sure how to track down any updates I might need.
3) I tried a Maxell CD and had the same results
4) I tried resetting the burning speed to both 8x and 4x and it still froze up right after "checking playlist"
Thanks for your help. I really appreciate it.

Can no longer burn CDs in iTunes

I have successfully been burning CDs in iTunes until recently. I can now no longer burn an audio CD. The CDs I am using are the same as before (CD-R, same make etc) and I am trying to burn albums purchased through iTunes. No error message comes up, it just doesn't burn. I have the latest version of iTunes loaded but can't remember when I loaded this. Perhaps my problems have occurred since then? Can anyone help?

Correction... Running OS 10.6.7

Can't Burn CDs (emachines T3830) - used to be able to

All of a sudden, I can't burn CDs. I was able to up until recently. I installed the Acura TTS software to allow me use my IPOD in a new car and was wondering if anyone knew if this interfered with the burn function. Orif the CD diagnostics indicate some other problem?
Here are the diagnostics:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
GATEWA SR84510A
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller\Intel(R) 82845G/GL/GE/PE/GV Graphics Controller
IDE\DiskWDCWD800BB-22JHA0_____________________05.01C05, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskeM_____Bay_Reader_____1.00, Bus Type USB
USBSTOR\DiskeM_____Bay_Reader_____1.01, Bus Type USB
USBSTOR\DiskeM_____Bay_Reader_____1.02, Bus Type USB
USBSTOR\DiskeM_____Bay_Reader_____1.03, Bus Type USB
IDE\CdRomHL-DT-STRW/DVD_GCC-4481B_______________1.00___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
E: HL-DT-ST RW/DVD GCC-4481B, Rev 1.00
Audio CD in drive.
Found 10 songs on CD, playing time 36:20 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:25:30
Track 3, start time 08:09:17
Track 4, start time 11:45:27
Track 5, start time 14:54:67
Track 6, start time 18:08:62
Track 7, start time 22:04:47
Track 8, start time 25:36:07
Track 9, start time 28:27:65
Track 10, start time 32:19:45
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 10 16 24 32 40 48.
The drive CDRW speeds are: 4.
The last failed audio CD burn had error code 4450(0x00001162). It happened on drive E: HL-DT-ST RW/DVD GCC-4481B on CDR media at speed 4X.

Please assist. Am an English teacher and thus a total technophobe - so please keep it simple!
Using iTunes to burn CDs has become increasingly impossible; I keep getting Error 4310 messages. I've used a CD-ROM cleaner disc to check there's no prob with the laser, but that's made no difference.
I ran CD Diagnostics and...
TriGem Computer, Inc. Emachines
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: Cdr4_xp (5.1.0.209),
UpperFilters: Cdralw2k (5.1.0.209), GEARAspiWDM (2.0.4.3),
Video Driver: Intel(R) 82810 Graphics Controller\Intel(R) 82810 Graphics Controller
Found aspi32 running.
IDE\DiskSAMSUNGSV2042H________________________PK100-19, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSAMSUNGCDRW/DVD_SM-308B________________T100___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: SAMSUNG CDRW/DVD SM-308B, Rev T100
Audio CD in drive.
Found 20 songs on CD, playing time 73:59 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:38:00
Track 3, start time 07:13:15
Track 4, start time 11:03:30
Track 5, start time 13:51:32
Track 6, start time 17:22:30
Track 7, start time 20:54:65
Track 8, start time 24:51:72
Track 9, start time 28:53:55
Track 10, start time 32:47:40
Track 11, start time 36:36:07
Track 12, start time 40:03:10
Track 13, start time 44:03:72
Track 14, start time 47:44:67
Track 15, start time 51:35:60
Track 16, start time 55:36:50
Track 17, start time 59:25:52
Track 18, start time 63:14:25
Track 19, start time 66:44:37
Track 20, start time 70:02:07
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 2 4 8.
The drive CDRW speeds are: 2 4 8.
The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive D: SAMSUNG CDRW/DVD SM-308B on CDR media at speed 8X.
Any sage advice, folks?
Cheers
Beldo

Help Please: Unable to Import or Burn CDs with iTunes

Hello,
At some point over the last few updates I seem to have lost the ability to import or burn CDs with iTunes. I've done so many times in the past with no problem however when I attempt to do so now my entire PC restarts or in a few cases gives me the generic Windows "iTunes needs to close" error.
So far I've made sure my PC is not overheating. I've ruled out spyware or viruses using AVG and CCleaner. I've swapped out power supplies only to have the problem continue. I am able to listen to music and/or burn CDs and DVDs in both of my drives using other applications with no problem. I've tried fresh, clean installs of iTunes all the way back to 8.02 with no success. I've even gone as far as to completely reformat Windows only to have this problem continue.
Any help or suggestions would be most welcome. I will be glad to provide any requested information, thank you.
Message was edited by: Simbelmyne

What good is buying your music through itunes if you can't burn a cd and/or back it up? Why isn't this issued solved - I can't burn a cd. I have missing registry files and warning that says to reinstall which I've tried unsuccessfully. Hopefully they'll find a fix before I lose my 500 songs I've purchased...does anyone back up on a external hard drive - any suggestions? Thanks

Toonz help.........error 4000 can't burn cds

I have tried everything! Installed itunes 6.0.3, upgraded firmware, windows update...still can't burn cds. Do I need to buy a new burner? Toonz help
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
NVIDIA AWRDACPI
iTunes 6.0.3.5
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), Cdr4_xp (7.1.0.95),
UpperFilters: Cdralw2k (7.1.0.95), pwd_2k (7.1.0.95), GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce4 MX Integrated GPU\GeForce4 MX Integrated GPU
Found aspi32 running.
SCSI\DiskMaxtor6E040L0_________NAR6, Bus Type SCSI, Bus Address [0,0]
USBSTOR\DiskWD_____1600JD_External101a, Bus Type USB
SCSI\CdRomSAMSUNGCD-ROM_SC-148A_B402, Bus Type SCSI, Bus Address [1,0]
SCSI\CdRomNEC____DVD_RW_ND-2500A1.0A, Bus Type SCSI, Bus Address [0,0]
Current user is administrator.
D: _NEC DVD_RW ND-2500A, Rev 1.0A
Audio CD in drive.
Found 14 songs on CD, playing time 56:46 on CDROM-XA media.
Track 1, start time 00:02:00
Track 2, start time 05:08:25
Track 3, start time 08:07:62
Track 4, start time 12:02:17
Track 5, start time 17:01:02
Track 6, start time 21:57:00
Track 7, start time 25:53:25
Track 8, start time 30:25:50
Track 9, start time 33:31:17
Track 10, start time 37:14:72
Track 11, start time 40:17:65
Track 12, start time 43:05:67
Track 13, start time 47:14:72
Track 14, start time 51:44:07
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 16 20 24 32.
The drive CDRW speeds are: 4 8 16 20.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
E: SAMSUNG CD-ROM SC-148A, Rev B402
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive D: _NEC DVD_RW ND-2500A on CDR media at speed 4X.

I think I fixed it...I went under My Computer, then right clicked on the cd drive that I used to burn, go to properties, went under the auto play tab, selected the action to perform button for each individual category(dvd, blank cd, music cd) selected the no action icon for each category. Then went to the recording tab and unselected the enable recording selection. Now I can burn every time! If this fixes it for anyone else let me know!
Jr

After burning cds on iTunes using my Mac, every track seems to skip

I've been always burning cds on iTunes. Lately, I burned about 3 cds and everytime I play them, every track seems to skip. Is there a solution for this? I'm not sure if it's the burner or something else. Please help!

jangelbabe5 wrote:
I've been always burning cds on iTunes. Lately, I burned about 3 cds and everytime I play them, every track seems to skip. Is there a solution for this? I'm not sure if it's the burner or something else. Please help!
Burning CDs, especially with iTunes, has always been finicky.
For CDs that have playback problems, the first thing to try is to burn again at a very low speed, e.g. 2x. This selection is made as the "Preferred Speed" in the Burn Disc dialog.
That often solves it, but if not, the next thing to try is a different brand of CD-R blank. (I assume you already know that CD-RWs will not give good results, so it has to be a CD-R.) I eventually gave up on every brand of CD-R blank except Verbatim, but it will depend on your burner.
If there are still problems, try burning a CD on the same computer with a non-iTunes program, such as Toast. If there is a problem with your burner, you will see it.

Burning cds from Itunes

Cannot burn cds from itunes purchased cds or itunes playlists

Hi Queenv77,
Whether or not the track infomation shows up on a burned CD depends on if you are creating an Audio CD or an MP3 CD; track information is not available on audio CDs. The following articles have more information regarding burning CDs from iTunes:
iTunes 10 for Windows: Create your own MP3 CDs
http://support.apple.com/kb/PH1661
iTunes 10 for Windows: Create your own audio CDs
http://support.apple.com/kb/ph1660
How iTunes remembers audio CDs
http://support.apple.com/kb/HT3814
Cheers,
- Brenden

Burning cds on itunes

I tried to urn a cd usting itunes, it goes to checking media and than it freezes. I have used itunes to burn cds before and it has just started to do this now. I upgraded to itunes 6.0.2 and the problem still occurs. Help!!!!

jangelbabe5 wrote:
I've been always burning cds on iTunes. Lately, I burned about 3 cds and everytime I play them, every track seems to skip. Is there a solution for this? I'm not sure if it's the burner or something else. Please help!
Burning CDs, especially with iTunes, has always been finicky.
For CDs that have playback problems, the first thing to try is to burn again at a very low speed, e.g. 2x. This selection is made as the "Preferred Speed" in the Burn Disc dialog.
That often solves it, but if not, the next thing to try is a different brand of CD-R blank. (I assume you already know that CD-RWs will not give good results, so it has to be a CD-R.) I eventually gave up on every brand of CD-R blank except Verbatim, but it will depend on your burner.
If there are still problems, try burning a CD on the same computer with a non-iTunes program, such as Toast. If there is a problem with your burner, you will see it.

How can I burn CDs that will play on my car stereo CD player?

How can I burn CDs that will play on my car stereo CD player?

Make sure the format when you burn your playlist is one your car's CD player will recognize. Typically mp3 songs are readable now but when in doubt, burn an audio cd. Yes, you will get less songs per cd (as compared to mp3 formatted one) but you are guaranteed the cd will work in any place. Most cars have it written on the radio somewhere what formats it can read for CDs.. Good luck!

Patch for error code 2131 when burning CDs in itunes for Toshiba computers:

Just today, Toshiba posted patch for the infamous "error code 2131" when trying to burn CDs in itunes on many Toshiba laptops. Lucky for me, today was the first time I tried to do so, but I feel for all you other folks who have been very frustrated about this issue. Here is the link to it on the Toshiba support page:
http://www.csd.toshiba.com/cgi-bin/tais/su/susc_dtlViewDL.jsp?soid=2024958&moid=1909174&rpn=PSAF3U&BV_SessionID=@@@@043462335 6.1208403240@@@@&BV_EngineID=cccgadedlgfhkdecgfkceghdgngdgnn.0&ct=DL&alldocs=false
I'm going to install it now and report back if there is anything tricky about it (I read in another forum that someone had already gotten the patch and had posted a link to it at a private website where there were a few different options and you had to figure out which was the right one, but this should be easier and "official")
Hope this helps!

Dell Inc. Dell DM051
hmmmmm. i'm proceeding under the assumption that you've got a Dell 5150/E510. if i'm wrong about that, please check in with Dell to confirm your model prior to applying any updates.
i had a look at the support site for your model (or at least, what i'm assuming your model is). your firmware appears to be up to date for the HL-DT-ST DVD+-RW GWA4164B that you're getting the error on, but there does seem to be newer firmware available for the SONY DVD-ROM DDU1615. so it might be worth getting that, just in case there some kind of odd interaction happening between the drives.
Dimension 5150/E510
otherwise, we'd better check on some of the other usual suspects with this sort of thing:
iTunes for Windows doesn't recognize my audio CDs
... and these resources might be helpful with that:
Using CD Diagnostics in iTunes for Windows to troubleshoot CD/DVD drive issues
Updating the drivers on your Windows PC

Computer freezes when trying to burn cds with itunes

I don't know if this would help other people with issues related to burning cds with itunes but here it goes:
My computer running Windows XP SP2 and itunes 7.6.1.9 suddently stopped burning cds via itunes about a couple of versions ago. Burning would start correctly, however the operation never completed successfully, in fact, the computer would completly freeze before getting too far. The computer had to be hard booted, meaning I had to hold the power button to kill it. The only solution that I've come up with that effectively corrects this problem is as follows:
Close itunes
Go to Start > Control Panel > Administrative Tools > Services
Look for IMAPI CD-Burning COM Service and open it (double-click it):
If not started, start it by clicking the Start button
Select Startup Type as Automatic
Go to Recovery tab and set first, second and subsequent failures to Restart the Service
Click Apply and then Ok to close window
Look for iPod Service and open it:
If not started, start it by clicking the Start button
Select Startup Type as Automatic
Click Apply and then Ok to close window
Restart itunes, try burning a cd from a playlist in itunes. There is no guarantee that this will solve your issue, but it is worth a shot, it has worked for me so far.

Hi Toonz,
My CD Diagnostics....
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Hewlett-Packard Presario V2000 (PP985PA#ABG)
iTunes 6.0.2.23
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: Intel(R) 82852/82855 GM/GME Graphics Controller\Intel(R) 82852/55 GM/GME Controller
IDE\DiskST94019A_______________________________3.09___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STDVD-RW_GWA-4080N_______________0C09___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: HL-DT-ST DVD-RW GWA-4080N, Rev 0C09
Audio CD in drive.
Found 16 songs on CD, playing time 55:24 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:22:62
Track 3, start time 07:24:45
Track 4, start time 10:48:10
Track 5, start time 15:09:25
Track 6, start time 15:38:00
Track 7, start time 18:13:72
Track 8, start time 24:20:60
Track 9, start time 26:28:05
Track 10, start time 31:11:25
Track 11, start time 34:39:65
Track 12, start time 36:13:22
Track 13, start time 38:48:47
Track 14, start time 43:30:57
Track 15, start time 48:22:65
Track 16, start time 50:48:10
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 10 16 24.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.

TS1436 I cant burn CDS using itunes but burns using windows media. itunes up to date what now?

I cant burn cds using itunes but burns in window media.itunes up to date what now?

Join the crowd. I was thinking of going back to a previous version, but had heard that could be a problem. Fortunately, I have more than one computer and things work fine there. I'm thinking it could be the burner in the problem computer, but it was working just fine before the upgrade...

Can't burn CDs in itunes 7.4.2

Similar Messages

Maybe you are looking for