Can't burn CDs in Lion 10.7.2

Message says Canceling burn. This is after it collects the titles in the playlist. I tested this and have discovered that if the playlist spans more than 1 CD, iTunes will cancel the burn without even trying to determine how much to write to the CD. iTunes will tell you it has to span disks, but it never will. I reduced the list of songs to 2 and it wrote the CD with no problem. Why do I have to add up the file sizes and burn just what fits on one CD at a time? Is this by design?

post in the iTunes for Mac forum.

Similar Messages

  • Can't Burn CDs (emachines T3830) - used to be able to

    All of a sudden, I can't burn CDs. I was able to up until recently. I installed the Acura TTS software to allow me use my IPOD in a new car and was wondering if anyone knew if this interfered with the burn function. Orif the CD diagnostics indicate some other problem?
    Here are the diagnostics:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    GATEWA SR84510A
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller\Intel(R) 82845G/GL/GE/PE/GV Graphics Controller
    IDE\DiskWDCWD800BB-22JHA0_____________________05.01C05, Bus Type ATA, Bus Address [0,0]
    USBSTOR\DiskeM_____Bay_Reader_____1.00, Bus Type USB
    USBSTOR\DiskeM_____Bay_Reader_____1.01, Bus Type USB
    USBSTOR\DiskeM_____Bay_Reader_____1.02, Bus Type USB
    USBSTOR\DiskeM_____Bay_Reader_____1.03, Bus Type USB
    IDE\CdRomHL-DT-STRW/DVD_GCC-4481B_______________1.00___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    E: HL-DT-ST RW/DVD GCC-4481B, Rev 1.00
    Audio CD in drive.
    Found 10 songs on CD, playing time 36:20 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:25:30
    Track 3, start time 08:09:17
    Track 4, start time 11:45:27
    Track 5, start time 14:54:67
    Track 6, start time 18:08:62
    Track 7, start time 22:04:47
    Track 8, start time 25:36:07
    Track 9, start time 28:27:65
    Track 10, start time 32:19:45
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 10 16 24 32 40 48.
    The drive CDRW speeds are: 4.
    The last failed audio CD burn had error code 4450(0x00001162). It happened on drive E: HL-DT-ST RW/DVD GCC-4481B on CDR media at speed 4X.

    Please assist. Am an English teacher and thus a total technophobe - so please keep it simple!
    Using iTunes to burn CDs has become increasingly impossible; I keep getting Error 4310 messages. I've used a CD-ROM cleaner disc to check there's no prob with the laser, but that's made no difference.
    I ran CD Diagnostics and...
    TriGem Computer, Inc. Emachines
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: Cdr4_xp (5.1.0.209),
    UpperFilters: Cdralw2k (5.1.0.209), GEARAspiWDM (2.0.4.3),
    Video Driver: Intel(R) 82810 Graphics Controller\Intel(R) 82810 Graphics Controller
    Found aspi32 running.
    IDE\DiskSAMSUNGSV2042H________________________PK100-19, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomSAMSUNGCDRW/DVD_SM-308B________________T100___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: SAMSUNG CDRW/DVD SM-308B, Rev T100
    Audio CD in drive.
    Found 20 songs on CD, playing time 73:59 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:38:00
    Track 3, start time 07:13:15
    Track 4, start time 11:03:30
    Track 5, start time 13:51:32
    Track 6, start time 17:22:30
    Track 7, start time 20:54:65
    Track 8, start time 24:51:72
    Track 9, start time 28:53:55
    Track 10, start time 32:47:40
    Track 11, start time 36:36:07
    Track 12, start time 40:03:10
    Track 13, start time 44:03:72
    Track 14, start time 47:44:67
    Track 15, start time 51:35:60
    Track 16, start time 55:36:50
    Track 17, start time 59:25:52
    Track 18, start time 63:14:25
    Track 19, start time 66:44:37
    Track 20, start time 70:02:07
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 2 4 8.
    The drive CDRW speeds are: 2 4 8.
    The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive D: SAMSUNG CDRW/DVD SM-308B on CDR media at speed 8X.
    Any sage advice, folks?
    Cheers
    Beldo

  • How can I burn CDs that will play on my car stereo CD player?

    How can I burn CDs that will play on my car stereo CD player?

    Make sure the format when you burn your playlist is one your car's CD player will recognize. Typically mp3 songs are readable now but when in doubt, burn an audio cd. Yes, you will get less songs per cd (as compared to mp3 formatted one) but you are guaranteed the cd will work in any place.  Most cars have it written on the radio somewhere what formats it can read for CDs.. Good luck!

  • How can i burn to disc lion os x?

    how can i burn to disc lion os x?

    Depends on what you want to burn. You can use Disk Utility (located at Applictions > Utilities) or use 3rd-party software like Burn (http://burn-osx.sourceforge.net/)

  • Can't burn CDs in iTunes

    I can't burn CDs in iTunes. I get "The attempt to burn a disc failed. An unknown error occurred (4261). I have tried to reduce the speed - didn't work. I have never had a problem before - but after I downloaded the new version of iTunes, I can't burn. I know the burner works because I can burn using NERO. Please help!

    I'm assuming you have already resolved the issue, but if you have not, I would recommend that you uninstall iTunes completely and remove anything related to Apple on your computer including Quicktime. See this post for what you need to remove: http://mismike.blogspot.com/2008/03/itunes-wont-close-on-windows-xp-sp2.html. Good luck.
    -NKA

  • Device filter Problems, can't burn cds in iTunes, Blank CDs appear to have

    Problem was first noticed because I can't burn CDs in iTunes.
    The problem is that all blank CDs show that they have no space on them available. If I look at the properties of a blank CD, they show 0 bytes used, 0 bytes free and 0 bytes available.
    By removing the upperfilters and lowerfilters in the registry, (accoring to the Microsoft prescribed method for this problem found at http://support.microsoft.com/kb/314060) the problem is solved for my whole sytem except for iTunes. iTunes then tells me that "the registry settings used by iTunes drivers for importing and burning CDs and DVDs are missing. ... Please reinstall iTunes."
    I reinstall or repair iTunes and then iTunes opens fine but I can't burn with iTunes or any other program since I am back to all blank CDs showing there is no space available.
    The iTunes toubleshooting Fac found at http://docs.info.apple.com/article.html?artnum=302976 has been tried also and does not change the problem of blank CDs having no space available.
    Here are the cd diagnostics: (Run with my whole system working except iTunes burner)
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Gateway ESSEX2
    iTunes 7.1.1.5
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    Current user is an administrator.
    Video Display Information:
    NVIDIA GeForce4 MX 440 (Gateway)
    NVIDIA GeForce FX 5200 (Gateway)
    Connected Device Information:
    DiskDrive, WDC WD2500JB-53EVA0, Bus Type ATA, Bus Address [0,0]
    CDROM, HL-DT-ST DVDRAM GMA-4020B, Bus Type ATA, Bus Address [1,0]
    CDROM, JLMS XJ-HD166S, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
    Gateway Essex2   Windows XP  

    Same problem here!!! This is driving me crazy. Glad to see it isn't me not knowing what I am doing when a couple of months ago I had no problems now as of last night after trying to burn to a CD I had the exact same issue.

  • Can't burn CDs (but can burn DVDs!!) Satellite U400-20v

    hi,
    I have a satellite u400-20v. There was no problem at first to read or burn a CD or DVD but after I setup windows 7 ultimate. my cd rom now can read both CDs and DVDs and can burn DVDs but can't burn CDs (data or audio). The burner gives me an error msg as soon as it begins writing the  cd. My optical drive is called Mat**bleep**a DVD-RAM UJ862AS ATA device (at the device manger). 
    Please help
    Thanx

    iTunes can be a bit flaky on 64 bit Vista since it's not supported but it has been known to work.
    Try updating your CD/DVD drivers here -> http://www.gearsoftware.com/support/drivers.cfm
    Also, make sure the your other firmware & drivers are up to date.

  • Toonz help.........error 4000 can't burn cds

    I have tried everything! Installed itunes 6.0.3, upgraded firmware, windows update...still can't burn cds. Do I need to buy a new burner? Toonz help
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    NVIDIA AWRDACPI
    iTunes 6.0.3.5
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: PxHelp20 (2.0.0.0), Cdr4_xp (7.1.0.95),
    UpperFilters: Cdralw2k (7.1.0.95), pwd_2k (7.1.0.95), GEARAspiWDM (2.0.4.3),
    Video Driver: NVIDIA GeForce4 MX Integrated GPU\GeForce4 MX Integrated GPU
    Found aspi32 running.
    SCSI\DiskMaxtor6E040L0_________NAR6, Bus Type SCSI, Bus Address [0,0]
    USBSTOR\DiskWD_____1600JD_External101a, Bus Type USB
    SCSI\CdRomSAMSUNGCD-ROM_SC-148A_B402, Bus Type SCSI, Bus Address [1,0]
    SCSI\CdRomNEC____DVD_RW_ND-2500A1.0A, Bus Type SCSI, Bus Address [0,0]
    Current user is administrator.
    D: _NEC DVD_RW ND-2500A, Rev 1.0A
    Audio CD in drive.
    Found 14 songs on CD, playing time 56:46 on CDROM-XA media.
    Track 1, start time 00:02:00
    Track 2, start time 05:08:25
    Track 3, start time 08:07:62
    Track 4, start time 12:02:17
    Track 5, start time 17:01:02
    Track 6, start time 21:57:00
    Track 7, start time 25:53:25
    Track 8, start time 30:25:50
    Track 9, start time 33:31:17
    Track 10, start time 37:14:72
    Track 11, start time 40:17:65
    Track 12, start time 43:05:67
    Track 13, start time 47:14:72
    Track 14, start time 51:44:07
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 16 20 24 32.
    The drive CDRW speeds are: 4 8 16 20.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.
    E: SAMSUNG CD-ROM SC-148A, Rev B402
    Drive is empty.
    The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive D: _NEC DVD_RW ND-2500A on CDR media at speed 4X.

    I think I fixed it...I went under My Computer, then right clicked on the cd drive that I used to burn, go to properties, went under the auto play tab, selected the action to perform button for each individual category(dvd, blank cd, music cd) selected the no action icon for each category. Then went to the recording tab and unselected the enable recording selection. Now I can burn every time! If this fixes it for anyone else let me know!
    Jr

  • Can't burn CDs - can't find driver updates

    Aaargh! It's happened again!!!
    When I put a CD in, the CD is recognized as blank but when I try to burn the playlist, Itunes hesitates for about 30 seconds and then ejects the CD with no error message.
    This happened about three months ago and I spent two days looking for driver updates and mindlessly uninstalling applications and it began working again. I am certain I am having some conflict with other software because my burner works fine with SonicStage with the same CDs. Does anyone know how to identify the offending software? I have scanned several posts with similar issues, but do not see anything in the past few days which applies.
    My diagnostics are:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Gateway E-4100
    iTunes 7.1.1.5
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    Video Controller (VGA Compatible)
    NVIDIA GeForce 6800
    NVIDIA GeForce4 Ti 4200 (Microsoft Corporation)
    Connected Device Information:
    DiskDrive, ST3160812A, Bus Type ATA, Bus Address [0,0]
    CDROM, HL-DT-ST DVDRAM GMA-4020B, Bus Type ATA, Bus Address [1,0]
    CDROM, JLMS XJ-HD166S, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    D: JLMS XJ-HD166S, Rev DGS3
    Audio CD in drive.
    Found 14 songs on CD, playing time 47:42 on CDROM media.
    Track 1, start time 00:02:00
    Track 2, start time 03:00:65
    Track 3, start time 06:23:00
    Track 4, start time 10:34:72
    Track 5, start time 12:18:40
    Track 6, start time 15:35:57
    Track 7, start time 18:35:42
    Track 8, start time 21:04:62
    Track 9, start time 24:09:32
    Track 10, start time 27:54:65
    Track 11, start time 31:57:02
    Track 12, start time 34:21:27
    Track 13, start time 37:23:25
    Track 14, start time 44:53:65
    Audio CD reading succeeded.
    Get drive speed succeeded.
    E: HL-DT-ST DVDRAM GMA-4020B, Rev A105
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 12.
    The drive CDRW speeds are: 4 8.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.

    There was a post May 1 with lots of good information however it was not helpful for me. I tried what was suggested and still can not burn CD. Apple support was not able to help either. I get to install blank CD>>> incert the CD and nothing happens. No error message. I don't even know what to look for or where to begin. This just started happinging when I updated with the lastest version of iTunes.
    Got any helpful suggestions... please post details

  • I can't burn CDs in 7.0 with any consistency - most times, failure

    Every time I think I have the problem solved (uninstall and reinstall iTunes, reduce burn speed), I go back to not being able to burn a CD. I've probably had a dozen "bad" burns (diagnostic, below), and 4 successful ones. I can't figure out what the difference is. I absolutley HATE the new iTunes and I wish Apple would pay attention to all of us out here having this troubles, and send out a fix of some sort.
    Help, please!!!!!
    Here is my diagnostic:
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Computer Corporation Dimension 2400
    iTunes 7.0.1.8
    CD Driver 2.0.6.0
    CD Driver DLL 2.0.6.0
    LowerFilters: AFS2K (3.1.21.0), PXHELP20 (2.0.0.0), CDR4_XP (6.2.0.110),
    UpperFilters: GEARAspiWDM (2.0.6.0), Cdralw2k (6.2.0.110), pwd_2k (6.2.0.110),
    Video Driver: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller\Intel(R) 82845G /GL/GE/PE/GV Controller
    IDE\DiskWDCWD1600JB-22GVA0____________________08.02D08, Bus Type ATA, Bus Address [0,0]
    IDE\DiskWDCWD1600JB-75GVC0____________________08.02D08, Bus Type ATA, Bus Address [1,0]
    IDE\CdRomHL-DT-STCD-ROM_GCR-8481B_______________1.06___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomHL-DT-STCD-RW_GCE-8483B________________B105___, Bus Type ATA, Bus Address [1,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is an administrator.
    F: HL-DT-ST CD-ROM GCR-8481B, Rev 1.06
    Drive is empty.
    G: HL-DT-ST CD-RW GCE-8483B, Rev B105
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 48.
    The drive CDRW speeds are: 48 0 0.
    The last failed audio CD burn had error code -128(0xffffff80). It happened on drive G: HL-DT-ST CD-RW GCE-8483B on CDR media at speed 0X.
    Regards,
    Mike

    Hi,
    I have not yet done as you've requested, but I have nevertheless successfully burned three cds in a row, after a series of one failure, one sucess and one failure. after the second failure, i opened the playlist that I wanted to burn, closed iTunes, re-opened iTunes (which opened in the playlist that i wanted), put in a blank CD-R and immediately burned the cd without further action. i followed this process with the three different playlists that i wanted to burn, and for whatever reason, i was able to burn the three cds. the first time i had the failure this evening, i changed the burn speed, and it burned the next one. but then i tried to burn a second playlist, and i had a failure. so, that's when i tried the "open" and "close" iTunes process above. i have no idea whether that had anything to do with my success, or if i just got "lucky". maybe next time, i'll chant and whisper some incantations first...
    thanks for your help. i see that you have been responding to a lot of folks. i'm just not sure what those updates are, and i have replaced my harddrive since i bought the computer, so i wasn't sure if dell had my proper information still, which is why i didn't follow your advice (at least at this point).
    regards,
    mike

  • Can't burn cds

    my itunes has started acting up and no longer burns cds. the program will let me create a playlist, but when i insert a blank cd it just spits it back out and reads "insert blank cd" even though that is what i've used- and i've tried using various types of cds and it does that with all of them. itunes, as well as my mac hardrive, has also stopped recognizing audio cds with content on it, which makes me think it might be a problem with the cd drive hardware. any suggestions on what to do?

    Yeah, it really sounds like a hardware issue. You can try creating a new user on your machine and seeing if the problem exists there as well. If it doesn't, there is something corrupt in your main user. If it does, it's a system-wide issue (likely hardware, not software related).

  • Can't burn CDs in iTunes anymore

    The last few times I've tried to burn a CD in iTunes, I've been unable to. I assemble a playlist and click the burn button, and it gets as far as the "checking playlist" message, then freezes up. I ran the diagnostic test, and I'll paste my results below. I'm able to burn CDs with other programs, but I want to use iTunes because that's where all my music is.
    I've got the newest version of iTunes and am running Windows XP. I'm using Verbatim CD-Rs, which I've used for quite awhile and I've never had trouble before. I'm hoping someone here can help me out, because after spending an hour or more reading articles in the support section of the site, I'm no closer to a fix. Thanks in advance for any help.
    iTunes 7.0.1.8
    CD Driver 2.0.6.0
    CD Driver DLL 2.0.6.0
    LowerFilters: MxlW2k (1.0.1.109), Cdr4_xp (7.5.0.50),
    UpperFilters: pwd_2k (5.1.0.105), GEARAspiWDM (2.0.6.0), Cdralw2k (7.5.0.50),
    Video Driver: 32MB ATI Rage 128 Ultra\1002-5446-22
    IDE\DiskST340016A______________________________3.10___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomLITE-ONLTR-24102M______________________4DS2___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is an administrator.
    D: LITE-ON LTR-24102M, Rev 4DS2
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 2 4 8 10 12 16 20 24.
    The drive CDRW speeds are: 2 4.
    The last failed audio CD burn had error code -128(0xffffff80). It happened on drive D: LITE-ON LTR-24102M on CDR media at speed 0X.

    1)I do have Roxio Easy CD Creator on my computer, but I use that for copying CDs and making data CDs. I'm pretty sure I lost the installation CD when I moved a few years ago, so I really don't want to uninstall it.
    2) I went into the device manager in my control panel in XP and ran an update search for the drivers for my ATA and IDE controllers. It did find an update for the ATA driver and I installed it and restarted my computer, but it didn't change anything. I did a similar update driver search for my CD drive, and it didn't find any updates. I went to Dell's website and did a search for "firmware update" and it gave me way too many results. When I did the same search with my computer model name in it, it didn't give me any. I've had this computer for nearly 5 years, so I'm not sure how to track down any updates I might need.
    3) I tried a Maxell CD and had the same results
    4) I tried resetting the burning speed to both 8x and 4x and it still froze up right after "checking playlist"
    Thanks for your help. I really appreciate it.

  • APPLE -- are you listening? We can't burn CDs!

    I have spent a lot of hours trying to burn an audio CD, to no avail. I just wondered if Apple had considered that people will refuse to buy music from iTunes if we can't burn audio CDs.
    I'm desperately needing to burn ONE song onto a CD. I bought it from iTunes, but now I have to go and find the CD at a store somewhere. Do you suppose Apple will give me my money back?
    This is really frustrating!!!
    (Oh,I've checked every help system Apple provides, in case you're wondering. Nothing works.)
    IBM Thinkpad   Windows XP  

    Did it all. Updated windows. Uninstalled iTunes and Quick Time. Cleaned out temp files, etc. Reinstalled iTunes and Quick Time. Changed burn speed to 4x. Used new discs of a different brand.
    It ACTS like it is writing... goes through each song as if it is burning the CD. CD drive runs. Ends up showing the "finished" CD in the pane on the left in iTunes (just above the playlists.
    However... the disc is still empty! Nothing on it when you look at it in "My Computer" or "iTunes" or Windows Media player. This is downright depressing. There is so much music... so little time!! Help!
    I can import purchased CDs just fine, by the way.
    Oh... and thanks for sticking with me on this. I know there are probably a fair number of people with the same problems...
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    IBM 2686DHU
    iTunes 7.0.1.8
    CD Driver 2.0.6.0
    CD Driver DLL 2.0.6.0
    LowerFilters: AFS2K (3.1.21.0), PXHELP20 (2.0.0.0), DRVMCDB (1.0.0.1), SSCDBHK5 (1.0.0.1),
    UpperFilters: GEARAspiWDM (2.0.6.0),
    Video Driver: ATI MOBILITY RADEON X300\ATI MOBILITY RADEON X300
    IDE\DiskFUJITSUMHV2060AH______________________00840096, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomHL-DT-STRW/DVD_GCC-4242N_______________0J04___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is an administrator.
    D: HL-DT-ST RW/DVD GCC-4242N, Rev 0J04
    Drive is empty.
    The last failed audio CD burn had error code 4450(0x00001162). It happened on drive D: HL-DT-ST RW/DVD GCC-4242N on CDR media at speed 4X.

  • Can't burn CDs in itunes 7.4.2

    Ever since I downloaded the latest iTunes, I can't burn disks. It writes the tracks and when it starts burning the first song, it just hangs there and nothing happens. I burned a cd using iphoto and it worked. can't find an answer anywhere. I've killed 5 CDs! HELP!

    Good luck. The lesson I learned is 7.3 *****. Apple has not addressed this documented problem noted in this forum starting in June with the release of itunes 7.3 . I have also burned cd's now using toast. Unfortunately when you open that cd in itunes, the tracks are not listed as real names, rather track 1 and so on.
    I have reverted to 7.2, but still cannot burn a cd, and I will not upgrade for a long time until Apple fixes it. I even started in 'safe mode' and tried to burn, no luck. I then installed 7.2 in 'safe mode' and it did not help. Search prior posts for how to revert to 7.2, it's stable.
    Frustrated.

  • Error 4251-can't burn cds, can you help?

    Here are my diagnostics-please help this is very frustrating!!
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Dell Computer Corporation Dimension 4600i
    iTunes 7.4.3.1
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), sscdbhk5 (1.0.0.1), MxlW2k (1.1.0.116),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    Intel(R) 82865G Graphics Controller
    Connected Device Information:
    Disk drive, ST340014A, Bus Type ATA, Bus Address [0,0]
    CD-ROM Drive, SAMSUNG CD-R/RW SW-252S, Bus Type ATA, Bus Address [1,0]
    CD-ROM Drive, SAMSUNG DVD-ROM SD-616E, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    D: SAMSUNG DVD-ROM SD-616E, Rev F501
    Drive is empty.
    E: SAMSUNG CD-R/RW SW-252S, Rev R902
    Audio CD in drive.
    Found 16 songs on CD, playing time 58:40 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:52:37
    Track 3, start time 07:37:30
    Track 4, start time 11:32:55
    Track 5, start time 14:42:35
    Track 6, start time 19:20:63
    Track 7, start time 22:56:61
    Track 8, start time 26:52:62
    Track 9, start time 30:09:06
    Track 10, start time 35:04:12
    Track 11, start time 38:19:18
    Track 12, start time 41:30:43
    Track 13, start time 44:37:41
    Track 14, start time 47:43:71
    Track 15, start time 50:56:07
    Track 16, start time 54:30:24
    Audio CD reading succeeded (check for old firmware).
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 16 24 32 40 48.
    The drive CDRW speeds are: 4.
    Force Optical Power Calibration before burn is turned on in the preferences.
    The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: SAMSUNG CD-R/RW SW-252S on CDR media at speed 4X.

    I am getting sam error. If you get an answer please let me know. I can burn from musicmatch but not itunes!

Maybe you are looking for

  • Need advice on easy workflow for exporting all my (iPhoto) video to DVD

    Didn't know which group to post this to. It's a 'consumer' need but I need expert insights. I have several years of video clips in iPhoto, taken on consumer digicams and iPhone. I want an EASY way to get these strung together for burning to DVD prima

  • Using Vado Central with iMovie

    If I use Vado Central to import video from Vado HD to iMovie, file is converted from .avi to .mp4. For a sample file, .avi size is 64.5MB on Vado, and becomes 223.9MB .mp4 file. Using iMovie and selecting Optimize, it is converted to 60mb .mov file.

  • Question about EIGRP's feasible successor

    Hi, I read article "Who's Afraid of DUAL-3-SIA?" on http://www.cisco.com/en/US/partner/about/ac123/ac114/ac173/Q2-05/tech_routing.html there is a sample to explain a new IOS feature. But I have a question about that sample, why Router C can't be Rout

  • Audible Alert for one IMAP Email (security alert)?

    i tried a search for this and i assume i know the answer but i am hoping perhaps someone has a workaround. i have set up vitamin D (so far it is pretty fantastic on the demo) which allows me to get an email alert when there is activity/motion in fron

  • BFD crashes Logic - any ideas?

    Hi there. I just bought BFD and installed it on my Mac Pro 2.66 - 2 gigs ram. I had the demo on there before which worked fine. Now whenever I try to play a loop in the interface or drag and drop a midi file onto the arrange page from the BFD interfa