Can't burn CDs since upgrading to Tiger

I have a 1GHz powerbook G4 with a combo drive. Before I upgraded to Tiger I could burn CDs no problem. Now, CD-Rs from the very same batch as I used before don't get recognized on the desktop.
Important facts before you reply:
1. YES, I have checked that the preferences are properly checked so that the CDs should not be ignored.
2. Disk Utility can see the disk but says that they are not writable. However, the problem is not with the disk: my husband has a computer that is almost identical (1.5GHz Powerbook with Super Drive) and the same disk shows up fine.
3. The drive itself is working, in that it can see pre-written disks no problem.
4. I have already tried completely erasing my hard drive and clean-installing the OS and software. Made absolutely no difference.
5. I'm running the absolute latest version of the OS.
6. The details of the drive itself (as lifted from system profiler) are below.
MATSHITA CD-RW CW-8123:
Firmware Revision:     CA0T
Interconnect:     ATAPI
Burn Support:     Yes (Apple Shipped/Supported)
Cache:     2048 KB
Reads DVD:     Yes
CD-Write:     -R, -RW
Burn Underrun Protection CD:     Yes
Write Strategies:     CD-TAO, CD-SAO, CD-Raw
Media:     No

what I try do do sometimes is I have a Hard drive that I keep Panther on and when I run into problems like that I boot from an external Hard Drive and check it out. If you have access to an external HD that you can boot from or just install the Computers original CD's on it and test it out if that hasn't worked then it could be that the Drive has hardware malfunctions internally and could have broken down as a coincidence of installing OS tiger. I often did this trick when I first got tiger because I was having too many problems with it. I know this is probably not the best answer but I hope it helps you out. let me know of any developments.

Similar Messages

Unable to burn cds since upgrading to iTunes 8

i use dell in the office. i was always able to burn cds using itunes until i upgraded to version 8.0 (this problem continued even after upgrading to 8.1).
when i try to burn a disc it ejects the blank cd inside and i get an error message that says "the attempt to burn a disc failed. an unknown error occured (2131)."
the burner is able to burn using any other application on the computer. i ran diagnostics in itunes and here is what it said. can someone please help me?
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Inc. OptiPlex 755
iTunes 8.0.1.11
QuickTime 7.5.5
FairPlay 1.0.15
CD Driver 2.0.7.5
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.1.1.13
Bonjour 1.0.5.11 (118.5)
iTunes Serial Number 4DDC1126DAF47CC3
Current user is an administrator.
The current local date and time is 2008-10-07 19:23:49.
iTunes is not running in safe mode.
Video Display Information
Intel(R) Q35 Express Chipset Family
Intel(R) Q35 Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** CD/DVD Drive Tests **
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.0.7.5),
D: TSSTcorp CDDVDW SH-S203B, Rev SB02
Audio CD in drive.
Found 5 songs on CD, playing time 13:25 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 01:55:44
Track 3, start time 05:01:46
Track 4, start time 07:29:04
Track 5, start time 10:43:11
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 16 24 32 40 48.
The drive CDRW speeds are: 16.
The drive DVDR speeds are: 16.
The drive DVDRW speeds are: 16.
The last failed audio CD burn had error code 2131(0x00000853). It happened on drive D: TSSTcorp CDDVDW SH-S203B on CDR media at speed 0X.

Andrew,
This thread talks about error 2131 and Dell computers. About 3/4 of the way down someone posts a link to a firmware download that seems to solve the problem for a lot of people. Maybe it will help you too.
http://discussions.apple.com/thread.jspa?threadID=1037331&tstart=0

Can't Burn DVDs Since Upgrading to Leopard

The topic of the post pretty much says what my issue is.
But here are some details.
When I open Disk Utility and attempt to burn to a Memorex 2X DVD-R disc (verified as blank), I ultimately end up with the message "Unable to burn Name-of-Disk-Image. (The Media is not writable.)" This same media was burnable in Tiger. I have attempted to burn multiple DVD-Rs, with similar results.
When I attempt to burn to a DVD-RW disc, I get the error message "Unable to burn Name-of-Disk-Image. (An internal error occurred.)" Also tested with mulitple DVD-RWs.
So, my question is simple: How do I fix this problem?
If more information's needed, I'm willing to provide it.
My upgrade procedure was an Archive and Install, so I'm somewhat leery of using that as a solution - unless it's absolutely the only known way to resolve such an issue.

I don't have a solution, but have been having the same issue. Sometimes, the message goes out, but stays in the outbox.
I did a repair permissions about a week ago and it seemed to work. Now, it's doing it again and the tell tale sign is that you don't get the 'swoosh' sound as the mail goes out. Sometimes I press send and the message immediately goes to outbox with no attempt by mail to send it (as judged by watching activity monitor).
Very troubling because I invoice my clients via email attachment.
I have three mail accounts and all three behave the same way. Never had problems with this same setup in Tiger.

Can only print one copy at a time in AppleWorks since upgrading to Tiger

Since upgrading to Tiger 10.4.3, (now using version10.4.6) and AppleWorks 6.2.9, I cannot print more than one copy of my document using either of my Epson printers, a R200 and a C86. I did not have this problem with Panther and AW 6.
Apple techs said to reinstalled AW, did not help. Then did a complete archive and reinstall of Tiger, no help, then created a new preference folder, no help.
I found by trial and error that my Grammarian spell and grammar program by Linguisoft uses an input method to be active in order to correct AW documents. I sent them an email and their reply was, this is a bug in Mac OS X 10.4.x (all versions as of Nov, 2005) Specifically, if an input method is active, you will be unable to edit the number of copies or page range values in the dialog versions of Print and Page Setup. This is not a problem in the sheet versions of Print and Page Setup.
Certain older applications still use these dialogs (i.e., AppleWorks) instead of the more appropriate sheet equivalents. To clarify the difference, the sheet versions are "attached" to the actual document you are printing (take a look at, say, TextEdit), while the dialog versions appear modally in front of all document windows in applications that use them.
I wrote a three page letter to Apple and received a call from them, it seems that for now no upgrades to correct this problem is in the works, so for now I will have to make my corrections to all documents that I am working on, then change the input method in Grammarian and print my copies, then go back and make Grammarian active again.
Any suggestions on how to resolve this problem or am I the only one?
iMac G5 Mac OS X (10.4.6)

Hello DaisyMay,
You're quite welcome. Very glad to hear it helped!
Yet I'd like to mention the true ones of merit are the contributors of the original Japanese thread. I've just summarized and translated a bit.
Regarding why it takes so long to fix this bug/flaw, I suspect that it is because it won't affect the majority of American users who do not use input method at all, and besides, it seemingly affects only Carbon API, that Apple Computer Inc. is liable to neglect lately.
However, input method is a vital piece in CJK (Chinese, Japanese, Korean) languages, and any other languages that use more than 256 characters, and also quite a few Carbon applications are still in service, so for us (Japanese, e.g.), this bug/flaw is quite unacceptable.
It's new for me to know a non-CJK program, Grammarian, uses input method. Now I understand you'd see this bug/flaw unacceptable as well!
At least one of the contributors of Japanese thread said he let Apple Computer Japan know this problem via official telephone support channel. Also other said that Ergosoft Corp., the maker of EGWord, stated that this is a known-issue of OSX10.4 and they can do nothing but wait for Apple to fix it. Ergosoft has been specialized to Macintosh platform since 1984, so it's quite unlikely they had not reported this problem to Apple via developer channel.
After all, I think Apple knows this problem, whether a bug or a flaw.
Well, possibly, it might not be sufficient for an end-user to point out the problem via Apple's telephone support channel...
In such case, you may try this form -
http://www.apple.com/macosx/feedback/
In my humble opinion, they should shortly fix this, and meanwhile they should promptly publish the user-proposed work-around methods as a Knowledge Base article.
Have beautiful May,
Hiroto
Mac OS 9.1.x

Quicktime broadcaster won't work since upgrade to Tiger!

this is probably the worst experience i've had trying to get support from Apple. nothing remotely resembling my problem is anywhere in the knowledge base. here's the deal...
i used broadcaster every week prior to upgrade without any problems...NOW...i am unable to "enable video stream" since upgrading to Tiger. All I can broadcast is audio.
I EVEN have AppleCare support for my computer but Apple still won't help me!!!! I spent all day on this and need it to work TOMORROW MORNING! didn't expect any problems since it worked fine before.
Signed,
A disappointed customer who has used Apple Computers for 20+ years!

Okay....after a few more hours I decided to reinstall Quicktime Player and then re-enter my quicktime Pro registration key. Now it works. I'm still disappointed that Apple wouldn't help me with this though. Not the service I'm used to.
So...quicktime broadcaster users be advised of this need to reinstall quicktime after upgrading to Tiger. It wasn't just my g5 that was affected...I checked it out on my g4 powerbook and also had the same problem.

Since upgrading to Tiger Stuffit no longer works.

Since upgrading to Tiger, Stuffit no longer works. I cannot send an email with file compression selected, because it gives me an error message: The action could not be completed, an unknown internal program error has occurred.
I had been using version 9, but on the advice of Allume tech support, I uninstalled it, downloaded and installed Stuffit Deluxe 10.0.1. Twice. There are no error messages, as the program simply does not open. It is available in the dock, when I double click it, it will bounce once or twice and appear to be opening, and then stop bouncing. If I drag a file onto the icon, it bounces twice and then stops, no compressed file is created. If I go directly to the application folder and open the application, it looks like it will open, it places an icon in the doc for a split second, and then it goes away. Stuffit Expander, however, works fine.
Allume has stopped answering my inquiries because they can't figure out what's going on. Does anybody have any suggestions?

Prior to ugrading to Tiger did you repair your hard drive and permissions? Did you do a true Upgrade install or an Archive and Install? If you did an Upgrade install what version of OS X did you upgrade? If you did an Archive and Install, then try reinstalling Stuffit.
To repair the hard drive and permissions do the following:
Boot from your OS X Installer. Be sure to use the installer for the version of OS X you have installed. After the installer loads select Disk Utility from the Installer menu (or Utilities menu if using Tiger.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.1.1 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Device filter Problems, can't burn cds in iTunes, Blank CDs appear to have

Problem was first noticed because I can't burn CDs in iTunes.
The problem is that all blank CDs show that they have no space on them available. If I look at the properties of a blank CD, they show 0 bytes used, 0 bytes free and 0 bytes available.
By removing the upperfilters and lowerfilters in the registry, (accoring to the Microsoft prescribed method for this problem found at http://support.microsoft.com/kb/314060) the problem is solved for my whole sytem except for iTunes. iTunes then tells me that "the registry settings used by iTunes drivers for importing and burning CDs and DVDs are missing. ... Please reinstall iTunes."
I reinstall or repair iTunes and then iTunes opens fine but I can't burn with iTunes or any other program since I am back to all blank CDs showing there is no space available.
The iTunes toubleshooting Fac found at http://docs.info.apple.com/article.html?artnum=302976 has been tried also and does not change the problem of blank CDs having no space available.
Here are the cd diagnostics: (Run with my whole system working except iTunes burner)
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Gateway ESSEX2
iTunes 7.1.1.5
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Current user is an administrator.
Video Display Information:
NVIDIA GeForce4 MX 440 (Gateway)
NVIDIA GeForce FX 5200 (Gateway)
Connected Device Information:
DiskDrive, WDC WD2500JB-53EVA0, Bus Type ATA, Bus Address [0,0]
CDROM, HL-DT-ST DVDRAM GMA-4020B, Bus Type ATA, Bus Address [1,0]
CDROM, JLMS XJ-HD166S, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
Gateway Essex2 Windows XP

Same problem here!!! This is driving me crazy. Glad to see it isn't me not knowing what I am doing when a couple of months ago I had no problems now as of last night after trying to burn to a CD I had the exact same issue.

Can't burn CDs (but can burn DVDs!!) Satellite U400-20v

hi,
I have a satellite u400-20v. There was no problem at first to read or burn a CD or DVD but after I setup windows 7 ultimate. my cd rom now can read both CDs and DVDs and can burn DVDs but can't burn CDs (data or audio). The burner gives me an error msg as soon as it begins writing the cd. My optical drive is called Mat**bleep**a DVD-RAM UJ862AS ATA device (at the device manger).
Please help
Thanx

iTunes can be a bit flaky on 64 bit Vista since it's not supported but it has been known to work.
Try updating your CD/DVD drivers here -> http://www.gearsoftware.com/support/drivers.cfm
Also, make sure the your other firmware & drivers are up to date.

Toonz help.........error 4000 can't burn cds

I have tried everything! Installed itunes 6.0.3, upgraded firmware, windows update...still can't burn cds. Do I need to buy a new burner? Toonz help
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
NVIDIA AWRDACPI
iTunes 6.0.3.5
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), Cdr4_xp (7.1.0.95),
UpperFilters: Cdralw2k (7.1.0.95), pwd_2k (7.1.0.95), GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce4 MX Integrated GPU\GeForce4 MX Integrated GPU
Found aspi32 running.
SCSI\DiskMaxtor6E040L0_________NAR6, Bus Type SCSI, Bus Address [0,0]
USBSTOR\DiskWD_____1600JD_External101a, Bus Type USB
SCSI\CdRomSAMSUNGCD-ROM_SC-148A_B402, Bus Type SCSI, Bus Address [1,0]
SCSI\CdRomNEC____DVD_RW_ND-2500A1.0A, Bus Type SCSI, Bus Address [0,0]
Current user is administrator.
D: _NEC DVD_RW ND-2500A, Rev 1.0A
Audio CD in drive.
Found 14 songs on CD, playing time 56:46 on CDROM-XA media.
Track 1, start time 00:02:00
Track 2, start time 05:08:25
Track 3, start time 08:07:62
Track 4, start time 12:02:17
Track 5, start time 17:01:02
Track 6, start time 21:57:00
Track 7, start time 25:53:25
Track 8, start time 30:25:50
Track 9, start time 33:31:17
Track 10, start time 37:14:72
Track 11, start time 40:17:65
Track 12, start time 43:05:67
Track 13, start time 47:14:72
Track 14, start time 51:44:07
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 16 20 24 32.
The drive CDRW speeds are: 4 8 16 20.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
E: SAMSUNG CD-ROM SC-148A, Rev B402
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive D: _NEC DVD_RW ND-2500A on CDR media at speed 4X.

I think I fixed it...I went under My Computer, then right clicked on the cd drive that I used to burn, go to properties, went under the auto play tab, selected the action to perform button for each individual category(dvd, blank cd, music cd) selected the no action icon for each category. Then went to the recording tab and unselected the enable recording selection. Now I can burn every time! If this fixes it for anyone else let me know!
Jr

I can't use indesign since upgrade, it keeps asking me to upgrade java which I have done and still wont open please help me i have a deadline

i can't use indesign since upgrade, it keeps asking me to upgrade java which I have done and still wont open please help me i have a deadline

DL the SE 6 JRE from http://support.apple.com/kb/DL1572.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Can't Burn CDs (emachines T3830) - used to be able to

All of a sudden, I can't burn CDs. I was able to up until recently. I installed the Acura TTS software to allow me use my IPOD in a new car and was wondering if anyone knew if this interfered with the burn function. Orif the CD diagnostics indicate some other problem?
Here are the diagnostics:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
GATEWA SR84510A
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller\Intel(R) 82845G/GL/GE/PE/GV Graphics Controller
IDE\DiskWDCWD800BB-22JHA0_____________________05.01C05, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskeM_____Bay_Reader_____1.00, Bus Type USB
USBSTOR\DiskeM_____Bay_Reader_____1.01, Bus Type USB
USBSTOR\DiskeM_____Bay_Reader_____1.02, Bus Type USB
USBSTOR\DiskeM_____Bay_Reader_____1.03, Bus Type USB
IDE\CdRomHL-DT-STRW/DVD_GCC-4481B_______________1.00___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
E: HL-DT-ST RW/DVD GCC-4481B, Rev 1.00
Audio CD in drive.
Found 10 songs on CD, playing time 36:20 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:25:30
Track 3, start time 08:09:17
Track 4, start time 11:45:27
Track 5, start time 14:54:67
Track 6, start time 18:08:62
Track 7, start time 22:04:47
Track 8, start time 25:36:07
Track 9, start time 28:27:65
Track 10, start time 32:19:45
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 10 16 24 32 40 48.
The drive CDRW speeds are: 4.
The last failed audio CD burn had error code 4450(0x00001162). It happened on drive E: HL-DT-ST RW/DVD GCC-4481B on CDR media at speed 4X.

Please assist. Am an English teacher and thus a total technophobe - so please keep it simple!
Using iTunes to burn CDs has become increasingly impossible; I keep getting Error 4310 messages. I've used a CD-ROM cleaner disc to check there's no prob with the laser, but that's made no difference.
I ran CD Diagnostics and...
TriGem Computer, Inc. Emachines
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: Cdr4_xp (5.1.0.209),
UpperFilters: Cdralw2k (5.1.0.209), GEARAspiWDM (2.0.4.3),
Video Driver: Intel(R) 82810 Graphics Controller\Intel(R) 82810 Graphics Controller
Found aspi32 running.
IDE\DiskSAMSUNGSV2042H________________________PK100-19, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSAMSUNGCDRW/DVD_SM-308B________________T100___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: SAMSUNG CDRW/DVD SM-308B, Rev T100
Audio CD in drive.
Found 20 songs on CD, playing time 73:59 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:38:00
Track 3, start time 07:13:15
Track 4, start time 11:03:30
Track 5, start time 13:51:32
Track 6, start time 17:22:30
Track 7, start time 20:54:65
Track 8, start time 24:51:72
Track 9, start time 28:53:55
Track 10, start time 32:47:40
Track 11, start time 36:36:07
Track 12, start time 40:03:10
Track 13, start time 44:03:72
Track 14, start time 47:44:67
Track 15, start time 51:35:60
Track 16, start time 55:36:50
Track 17, start time 59:25:52
Track 18, start time 63:14:25
Track 19, start time 66:44:37
Track 20, start time 70:02:07
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 2 4 8.
The drive CDRW speeds are: 2 4 8.
The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive D: SAMSUNG CDRW/DVD SM-308B on CDR media at speed 8X.
Any sage advice, folks?
Cheers
Beldo

Can no longer print since upgrading modem.

can no longer print since upgrading modem. none of our apple devices see the HP printer anymore. they used to. says no airprint printers found. any thoughts on how to fix?

If you upgraded the modem......but you have not reset the printer back to its original default settings and then set it up again......now would be a good time to do this.
The printer still has the programmed settings to connect to your old modem, and it cannot find it, because it is no longer there. The printer is lost, and does not know how to find its way. It needs to be set up again with new settings to match your new modem.

How can I burn CDs that will play on my car stereo CD player?

How can I burn CDs that will play on my car stereo CD player?

Make sure the format when you burn your playlist is one your car's CD player will recognize. Typically mp3 songs are readable now but when in doubt, burn an audio cd. Yes, you will get less songs per cd (as compared to mp3 formatted one) but you are guaranteed the cd will work in any place. Most cars have it written on the radio somewhere what formats it can read for CDs.. Good luck!

Cannot Burn CDs Since I Transfered Itunes to an External Dirve

Hello
I need help with Itunes, Itunes does not open. Also I cannot burn Cds since I transfered Itunes to external dirve.
Please help.
Steve

iPods don't look for the library. iTunes does.
I recently moved my itunes music folder
Don't move your music folder.
Let iTunes do it.
Point iTunes prefs to the location where you wan tit.
Then go to menu Advanced -> *Consolidate library*.
This will copy the iTunes music folder to the location in iTunes prefs.

Can't burn CDs in iTunes

I can't burn CDs in iTunes. I get "The attempt to burn a disc failed. An unknown error occurred (4261). I have tried to reduce the speed - didn't work. I have never had a problem before - but after I downloaded the new version of iTunes, I can't burn. I know the burner works because I can burn using NERO. Please help!

I'm assuming you have already resolved the issue, but if you have not, I would recommend that you uninstall iTunes completely and remove anything related to Apple on your computer including Quicktime. See this post for what you need to remove: http://mismike.blogspot.com/2008/03/itunes-wont-close-on-windows-xp-sp2.html. Good luck.
-NKA

Can't burn CDs since upgrading to Tiger

Similar Messages

Maybe you are looking for