Can't burn disc for backup

i upgradee to itunes 8.2 on my hp pc. now i get a message registry software missing i have no other burning software on my pc what could be the issue

HI and Welcome to Apple Discussions...
You need to post in the iTunes for Windows forum here. http://discussions.apple.com/forum.jspa?forumID=800
Carolyn

Similar Messages

  • Burning Blu-ray discs for backup

    I need to be able to burn large data discs for backup purposes. I am considering purchasing an external blu-ray burner and would like to know if I need to buy third party software to burn discs or if the finder will do this without third party software. I don't mind using 3rd party software but would rather not pay for something I don't need.

    Remember optical disks you burn have a limited life expectancy. Any backup plan must include provision to take that into account or it is worthless.
    Allan

  • ITunes Won't Recognize Optical Drive / Can't Burn Discs.

    Hi. I’m having some problems w/ an installation of iTunes on a Windows 64 bit PC.  Specifically, when iTunes is installed, Windows 7 no longer recognizes the optical drive, and I can't burn discs via iTunes.  I’ve attempted to implement all the solutions identified here,
    Optical Drive is No Longer Recognized, or "Disc Burner or Software Not Found" alert after Install
    http://support.apple.com/kb/TS2308
    iTunes for Windows: Troubleshooting CD issues caused by device filters
    http://support.apple.com/kb/TS2372
    Can't burn a CD in iTunes for Windows
    http://support.apple.com/kb/TS1436
    iTunes for Windows: Additional troubleshooting tips for burning issues
    http://support.apple.com/kb/TS1374
    , and still find myself trapped in a vicious circle; i.e., (1) with iTunes installed Windows 7 no longer recognizes the optical drive, (2) Upon clearing the UpperFilters Value  of GEARAspiWDM  in the registry at  {4De36E965 … } Windows 7 functions as expected and I can play cds in iTunes, but iTunes produces an error messages at start up along the lines of “iTunes did not install properly. Or, there’s a registry error ”  In either case, I am not able to burn cds via iTunes.
    My most rigorous effort amounted to (1) uninstalling  all Apple products and third party GEAR driver update software via Control Panel, (2) a registry repair w/ Registry Mechanic and (3) reinstallation of all identifiable Apple software.  Still the problem remains.
    Apple I love you, but you’re bringing me down
    From iTunes Diagnostics (w/ UpperFilters Empty (I notice the Diagnostic Utility is also seeking a LowerFilters entry.  The registry doesn’t have references to LowerFilter at this location.  Maybe that’s the problem?)) …
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Hewlett-Packard HP Pavilion dv6 Notebook PC
    iTunes 11.0.5.5
    QuickTime 7.7.4
    FairPlay 2.4.14
    Apple Application Support 2.3.4
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.1.0.13
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0037B5E00A92****
    Current user is not an administrator.
    The current local date and time is 2013-09-03 09:58:34.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    ATI Technologies Inc., AMD M880G with ATI Mobility Radeon HD 4250
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: ce02c1*****d19e716edbe5d8ac7*****
    iPodService 11.0.5.5 (x64) is currently running.
    iTunesHelper 11.0.5.5 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    No drivers in UpperFilters.
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.

    update ... ran sfc /scannow as admin.  windows reports 100% integrity.

  • Can I use iCloud for backup?

    Can I use iCloud for backup?

    To back up all your data you are better off getting an external hard drive.  For details on iCould, read: http://www.apple.com/icloud/.

  • I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents?

    I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents? I am planning to transition to a Mac so using the iCloud seems to make the most sence.

    No, it is not a backup method at all.  If you delete a sync'd file on any device, you delete it permanently from iCloud.  That by its very essence is not a backup solution therefore.  A backup solution does not automatically and simultaneiously delete the file everywhere when it is deleted from the original source.
    iCloud is strictly a syncronization tool for using files on multiple internet connected devices.

  • Can't burn discs. Error message: The disc can't be burned because the device failed to calibrate the laser level for this media     can't be burned because the device

    Cannot burn discs. Error message: "The disc can't be burned because the device failed to calibrate the laser power level for this media". Then the blank disc is ejected.

    Two main possible causes:
    1. Poor media. Verbatim DVD-R work best, burned at only 2x or 4x.
    2. Dirty lens. Try cleaning the superdrive with a proprietary CD/DVD lens cleaner that uses tiny brushes.

  • Can't burn disc via iTunes. Burn speed too fast. AGAIN!

    "iTunes can't burn this CD because the burn speed is too fast for your CD burner or media. Choose a lower speed in the burning pane of iTunes Preferences then try burning again".
    I have been having on going problems burning CD’s in iTunes for YEARS, and I know I am not the only one. I get the error message above. Having checked the forum at the time, and posted for help, I am know there is no real solution except to change brand of disc.
    Thing is, now I can’t get ANY brands to work. I’ve been through Verbatim, Maxell, JVC, Sony, but none work. The only brand that would work were TDK audios which I can no longer find anywhere.
    I know its not the burner, as Toast works fine, and I know I am not alone. Anyone got any ideas?
    Even after years Apple seem to be blanking this question. It’s very frustrating not being able to burn my purchased itunes downloads to disc.

    To anyone who is interested I think I may have found a possible solution. When you put a blank disc in the drive, wait about 30-60 seconds or so for it to stop spinning before burning.
    This seems to work. It's a bit sticky but eventually works. I tried both TDK & Maxwell discs and 9 out of 11 worked. Absolutely no reason why the other 2 didn't, but it's a lot better than none.

  • Can't burn disc with OS X Mavericks from finder

    When attempting to burn a collection of files from a burn folder to a writeable CD, the drive loads the CD when inserted, the CD image appears over the burn folder image normally, but nothing further happens.  When attempting to eject the CD using the eject button or right-click and choosing eject, I get a message stating "You can't burn a disc using "Disc Name" because it's locked."  I can unlock the disc by using Get Info and unchecking the box for "locked".  However, this only allows me to eject the disc, I am still unable to burn the disc.  The symptom occurs with different discs so the problem is not related to the medi
    However, iTunes writes CD's normally.  It appears that only writing CD's from the finder does not work, so it is not the CD drive.

    Not sure this is related, however, after Facebook went down for about 20 min, soon after so did my Gmail (6) , 1 iCloud account(s). It's been hit and miss on downloading my email, however if I went to the websites I finally was able to get email. I then tried to see if my settings were correct and it appears all my passwords looked shorter than they really are. I reenter that information and voila, it's working again. Not a clue why those issues would have triggered my settings, however I know others have been complaining as well.
    http://www.pinterest.com/pin/create/extension/

  • Can't burn Disc from iTunes after Microsoft fix

    Okay ... long process to get iTunes working and I am almost there. Here is the saga ...
    I upgraded to iTunes 6.0 and after the upgrade neither of my CD/DVD drives would work. After surfing the internet, I found the solution on Microsoft.com, which was to delete some specific upper and lower filters from the registry and then reboot the computer. I did this and everything worked great. I was able to use iTunes and both my CD/DVD drives worked. But now .... I cannot burn any discs from iTunes, (I can burn from other places), it says,"cannot find recording disc" It will let me upload CDs into iTunes. Here is my CD diagnostics:
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Computer Corporation Precision WorkStation 350
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    Video Driver: ATI Fire GL E1 Video Accelerator\Fire GL E1
    IDE\DiskIC35L040AVVA07-0______________________VA2OA51A, Bus Type ATA, Bus Address [0,0]
    IDE\DiskWDCWD1600JB-75GVC0____________________08.02D08, Bus Type ATA, Bus Address [1,0]
    USBSTOR\DiskMaxtor4G120J6_________GAK8, Bus Type USB
    USBSTOR\DiskWD_____1200BB_External0602, Bus Type USB
    IDE\CdRomSAMSUNGDVD-ROM_SD-616T_________________F310___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomNEC_DVD+RW_ND-1100A____________________10GE___, Bus Type ATA, Bus Address [1,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
    The last failed audio CD burn had error code -128(0xffffff80). It happened on drive on -128(0xffffff80) media at speed 0X.

    hi TwinMom!
    hmmmm. was this the solution you used?
    (MS) CD-ROM access is missing and messages cite error Code 31, Code 32, Code 19, Code 39, or Code 41 after you remove Easy CD Creator in Windows XP
    i've seen a few follow up problems after applying that technique ... but usually they tend to involve this error message:
    "Warning! The registry settings used by the iTunes drivers for importing and burning CDs & DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
    what you're getting is still consistent with that (in a sense), because you don't have any itunes-related filter entries showing up in your diagnostics.
    so, let's start trying some techniques that have a reasonable track record against that error -43 that's showing up in your CD diagnostics.
    first, try a reboot and repair. reboot the PC (very important), and then do a repair install of itunes. go to your Add/Remove programs, select itunes, click "change/remove" and then select "repair".
    does that get rid of the -43?
    can you burn a CD after doing that?
    love, b

  • Can you burn discs with the HP Pavilion H8-1224?

    I tried telling the Geek Squad that my bottom silver button on the expansion bay won't workon my HP Pavilion H8-1224 & I can no longer burn discs. They said the button does not open anything but it used to. Am I losing my marbles?

    Hi,
    Yes, you can check supported blank discs from the following link:
        http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&docname=c03220156#N728
    It ONLY has one Optical drive. I don't know how you could open the second button.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Can't burn disc; need workaround

    Hi, folks:
    This is slightly off-topic-ish, but is IS Mac-related, so I'm hoping some smart bean here will have an idea.
    Here's the problem I'm trying to solve: I installed a game on my PS3 and it corrupted the drive. I installed the same game on my other PS3, and it corrupted the drive. (I sense a pattern here.) That second PS3 was given to me by my best friend before he killed himself, and contains a fortune in games, as well as hundreds and hundreds of hours of game saves. The PlayStation's own repair software is lame, lame, lame. Players have taken their drives out and repaired them using Windows boxes. I don't have access to one.
    But I can use Unix! Yay! I'll just download one, install it, and repair my discs, and then I'll be a happy girl!
    Boy, what a nightmare this has turned out to be. All Unix distros are .iso files, and I can't burn a single one to disc ("no mountable file system," "invalid argument," or else I got a couple of files onto a disc that are .efi files that're small that don't look as if they're complete installs). Found a terrific page telling me how to use the Terminal to get the files onto a USB stick, and I almost squirted, it seemed so easy! Alas, that's yielded a big fat goose egg, too: "Operation not supported."
    I've tried Ubuntu, Lubuntu, and Mint. I have no reason to believe that any other flavor will work, because invalid argument, no mountable file system, operation not supported.
    This shouldn't be that hard! I'm almost out of tears at this point. All I want to do it to repair my (FAT) disc. My Mac is old (2007 dual 2.8 Ghz) but it still oughtta be capable of doing this. I'm not trying to do anything fancy. ALL I want to do is to attempt to repair the one disc (and if it works, I'll tackle the other one) and then be done with it and get back to my gaming. I'm a disabled vet, meaning I haven't the resources to take it to a proper repair place (and I prolly just have a couple bad sectors. Most players do who've experienced what I have).
    Has anyone got any useful info for me? I'm at my wit's end. I'd be soooo grateful for some advice to get me going again.
    TThanks very much for anything you can offer.
    BInky

    -54 is a Permissions error that's right ...
    What are you trying to copy/burn ?
    What version of Toast are you running ?
    Remove the DivX QuickTime Plug-In and try burning again as it can mess up some burns ...

  • Can't Burn Disc Error Code -54

    What is going on? can anyone help? Every time i try to burn something in toast it tells me it can't burn the disc because i don't have the proper access permissions and displays error code -54 afterwards...

    -54 is a Permissions error that's right ...
    What are you trying to copy/burn ?
    What version of Toast are you running ?
    Remove the DivX QuickTime Plug-In and try burning again as it can mess up some burns ...

  • Can't burn CDRW for BootCamp drivers disk.  Error code 0x000003E8

    I know I previously burned the bootcamp drivers on this MacBook. Now I've upgraded Bootcamp to the latest beta today (1.2) I can't burn the drivers disk! I have gone through 3 different CDRWs and they all fail! (I started with erasing the older drivers CDRW and the erase went fine.., then reburned it and it failed so I pulled out two never used CDRWs and they both failed too!)
    Here is the very cryptic message I get:
    Burn Failed
    The burn to the MATSHITA DVD-R UJ-857 drive failed. 0x000003E8
    Has my drive died? Could three CDRWs in a row all be bad? They are 4x-12x rated Philips. The bootcamp software showed it was trying to burn at 10x speed (but it was greyed out so I couldn't change the speed to anything slower).. Does anyone have a clue what's going on here?

    Well, trying CD-Rs will not really solve the error because as I discovered, the RWs that Boot Camp told me failed to burn actually burned just fine! I discovered before trying to reerase them and try burning them with a different application that the contents were all proper and in tact. It is Boot Camp's error. I am going to mark this as solved and leave feedback for the Boot Camp team about the error. Thanks for your input.

  • Input needed:  Can't burn disc

    When trying to burn my songs to disc, I get the following message:
    The attempt to burn disc failed. An unknown error occurred [421]
    I'm attempting to move my iTunes music folder to an external hard drive since it seems as though I've used all the space on my C drive. Before I do this, I want to burn all of my music to a few disc so that I won't lose anything. It seemed like a good idea but I can't burn my music. Can anyone help?
    Dell   Windows XP  

    i'm having the exact same problem...

  • Can't burn discs in iTunes or like pulling teeth.

    I have posted on this subject a couple times now, and I read that I am not alone in this suffering. I receive the infamous error 4000 when trying to burn "any" music files from iTunes. What really frustrates me is that I can't even burn the music I purchase from "The Store" which as I understand in the user/purchase agreement is my "right"
    I have read through 40 pages of this forum about this issue and I have yet to see a fix for it. Is there a fix? I also see that others who suffer the same fate do not have an answer either. This issue is only related to itunes as I can burn in any other burning software that exists. I have taken many steps through the computer manufacturer (whom is also aware of this issue) only to discover that this is purely an iTunes problem. I have contacted iTunes support directly and have had no response regarding this issue, hence this rant. The only suggestions that I have seen are to alter system files that may or may not work. Why should I or anyone else have to do this when so much other software (for burning CDs) just seems to work?
    I would very much like to continue to use iTunes and by association the iTunes Store as I find this to be a convenient way to purchase music however, what good is it if I can’t burn this “purchased” music which I mentioned is my right.
    The only positive thing for me is that I am a stockholder and have made a few dollars from Apple, so maybe it’s a wash.
    Support for iTunes in Windows appears rather dismal to me right now.

    This is also my NUMBER 1 complaint about this POS ipod and itunes. I paid my money for songs and have the right to transfer these files to ANY format I choose for personal use. NOT ALL OF WANT TO BUY EVRY F'N ACCESSORY OUT THERE TO PLAY ITUNES IN OUR CARS OR ON HOME STEREOS. WE WANT TO BURN F'N CD'S TO USE IN OUR CARS AND ON OUR HOME STEREOS. Someone needs to correct this issue! I F'N bout the file and didnt pirate the file I have the right to use it in anyway i see fit for personal use! Like a dumb *** I went out and bought three ipods for my whole clan . Only to find the nightmare of having to set up three different libraries. Then the three different music libraries makes it were if one buys a song on itunes you cant move this file to another ipod and play it. Only they can or if you make the mistake and buy a song on a different system it wont transfer to your home itunes library.
    AND EVERYONE KNOW THESE PIECES OF **** CRASH AND LOOSE THEIR FILE EVRY OTHER F'N DAY!!!!!!!!!!!!!!!!!!!
    My RANT and what a waste of money this hardware and software is. GOD I WISH WINDOWS WOULD COME OUT WITH SOMETHINGS SO I CAN THROW ALL OF THESE IN THE TRASH!!!!!!

Maybe you are looking for

  • Exchange 2010: How to renew an SSL certificate?

    Hi all.  I have done some reading but it seems I can't find just a simple step-by-step on how to renew an SSL certificate issued by a 3rd party CA for Exchange 2010.  I really don't want to mess this one up by cobbling together partial answers from v

  • How to unlock memory card nokia 5310

    i just updated my nokia 5310 firmware from 5.81 to 8.32 and now my memory card has locked itself. can anyone help with this? does anyone know the code?

  • Fixed length of a field

    Hi Guru's, Can anyone help me about my program.? How can i get the exact length of a field so that when they are concatenated they have the same size of the field. Thank You in advance. Regards, dranel

  • RFC: SAPXPG_DBDEST_ SAPDBHOST giving error: Distributed system

    Hi All, We have distributed system (database & SAP application server running on different machines). Database: 10g OS: Sun solaris: 10 (for both App & DB servers) SAP version: ECC6 SAPXPG_DBDEST_<SAPDBHOST> giving error as follows Connection Error E

  • Display quality going down.

    Hey, I love my iphone4 But it seems every day i use my iphone the screen quality is going down. When i Text Message somebody i can really notice a diffrence. Do you think i should bring it back if it continues? I got it on launch date. And when was t