Can't burn disc with OS X Mavericks from finder

When attempting to burn a collection of files from a burn folder to a writeable CD, the drive loads the CD when inserted, the CD image appears over the burn folder image normally, but nothing further happens.  When attempting to eject the CD using the eject button or right-click and choosing eject, I get a message stating "You can't burn a disc using "Disc Name" because it's locked."  I can unlock the disc by using Get Info and unchecking the box for "locked".  However, this only allows me to eject the disc, I am still unable to burn the disc.  The symptom occurs with different discs so the problem is not related to the medi
However, iTunes writes CD's normally.  It appears that only writing CD's from the finder does not work, so it is not the CD drive.

Not sure this is related, however, after Facebook went down for about 20 min, soon after so did my Gmail (6) , 1 iCloud account(s). It's been hit and miss on downloading my email, however if I went to the websites I finally was able to get email. I then tried to see if my settings were correct and it appears all my passwords looked shorter than they really are. I reenter that information and voila, it's working again. Not a clue why those issues would have triggered my settings, however I know others have been complaining as well.
http://www.pinterest.com/pin/create/extension/

Similar Messages

  • Can you burn discs with the HP Pavilion H8-1224?

    I tried telling the Geek Squad that my bottom silver button on the expansion bay won't workon my HP Pavilion H8-1224 & I can no longer burn discs. They said the button does not open anything but it used to. Am I losing my marbles?

    Hi,
    Yes, you can check supported blank discs from the following link:
        http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&docname=c03220156#N728
    It ONLY has one Optical drive. I don't know how you could open the second button.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • ITunes Won't Recognize Optical Drive / Can't Burn Discs.

    Hi. I’m having some problems w/ an installation of iTunes on a Windows 64 bit PC.  Specifically, when iTunes is installed, Windows 7 no longer recognizes the optical drive, and I can't burn discs via iTunes.  I’ve attempted to implement all the solutions identified here,
    Optical Drive is No Longer Recognized, or "Disc Burner or Software Not Found" alert after Install
    http://support.apple.com/kb/TS2308
    iTunes for Windows: Troubleshooting CD issues caused by device filters
    http://support.apple.com/kb/TS2372
    Can't burn a CD in iTunes for Windows
    http://support.apple.com/kb/TS1436
    iTunes for Windows: Additional troubleshooting tips for burning issues
    http://support.apple.com/kb/TS1374
    , and still find myself trapped in a vicious circle; i.e., (1) with iTunes installed Windows 7 no longer recognizes the optical drive, (2) Upon clearing the UpperFilters Value  of GEARAspiWDM  in the registry at  {4De36E965 … } Windows 7 functions as expected and I can play cds in iTunes, but iTunes produces an error messages at start up along the lines of “iTunes did not install properly. Or, there’s a registry error ”  In either case, I am not able to burn cds via iTunes.
    My most rigorous effort amounted to (1) uninstalling  all Apple products and third party GEAR driver update software via Control Panel, (2) a registry repair w/ Registry Mechanic and (3) reinstallation of all identifiable Apple software.  Still the problem remains.
    Apple I love you, but you’re bringing me down
    From iTunes Diagnostics (w/ UpperFilters Empty (I notice the Diagnostic Utility is also seeking a LowerFilters entry.  The registry doesn’t have references to LowerFilter at this location.  Maybe that’s the problem?)) …
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Hewlett-Packard HP Pavilion dv6 Notebook PC
    iTunes 11.0.5.5
    QuickTime 7.7.4
    FairPlay 2.4.14
    Apple Application Support 2.3.4
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.1.0.13
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0037B5E00A92****
    Current user is not an administrator.
    The current local date and time is 2013-09-03 09:58:34.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    ATI Technologies Inc., AMD M880G with ATI Mobility Radeon HD 4250
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: ce02c1*****d19e716edbe5d8ac7*****
    iPodService 11.0.5.5 (x64) is currently running.
    iTunesHelper 11.0.5.5 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    No drivers in UpperFilters.
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.

    update ... ran sfc /scannow as admin.  windows reports 100% integrity.

  • I CAN NOT open Iphoto with the new Mavericks????

    I can not open Iphoto with the new Mavericks, I changed Dutch for English but stil nothing ....

    Hi Kevertjes,
    Thank you for the update.  I recommend verifying that you are signed in with the same Apple ID associated with or used to purchase iPhoto on the App Store under the Store menu. 
    If you are signed in with an alternate Apple ID, I recommend signing out of the App Store, signing back in with the correct Apple ID, and then trying the update again:
    Sign out
    Choose Store > Sign Out.
    Sign in using an Apple ID
    Choose Store > Sign In, or click Sign In in the Quick Links section. The Quick Links section is located in the right part of the window shown when you click Featured, Top Charts, or Categories in the toolbar.
    Enter your Apple ID and password, and then click Sign In.
    Mac App Store: Sign in and out
    http://support.apple.com/kb/PH11499
    All the best,
    Sheila M.

  • Can i Match invoices with a currency different from the purchase order curr

    Dear Valued Consultant,
    Can i Match invoices with a currency different from the purchase order curr
    Thanks

    Hi,
    As a functionality, Payables will not allow matching an invoice to a purchase order that is in a different currency.
    Refer Oracle Public sector payables user guide for 11i (page 4-94).
    I understand that there is an enhancement request (3286623) logged for this functionality.
    Please refer Note:172291.1
    - Thiagu

  • Is there a way I can access my iMac with the keyboard only from home screen?

    I accidentally turned off my Bluetooth and I tried to reboot my computer.  I'm now in kind of a hopeless situation. Is there a way I can access my iMac with the keyboard only from the home screen?

    Allow me to rephrase that question. Is there anyway I can I access my iMac from the login screen with the keyboard only?

  • Apple loops for garageband pack doesn't show the folder content (loops, files...)  in ableton live suite 8 library browser, but I can see all the loops in the folder from finder. how can i fix this? help please.

    apple loops for garageband pack doesn't show the folder content (loops, files...)  in ableton live suite 8 library browser, but I can see all the loops in the folder from finder. how can i fix this? help please.

    Thanks Barney, I tried that but all that comes up in Spotlight are the log files that show the file paths! I don't know how Steam works. Are all the files held by Steam on their server perhaps?

  • Burning Disc with Adobe Premiere Elements 12

    I have made a slideshow in premiere elements 12.  I cannot find how to export. The instruction booklet said to go to tools and choose movie menus. I did this and saw it offerd movie menus and burn disc in description. I added menu. Then it said to click publis+share >disc.  This I can't find anywhere.  Can someone explain where that is?  I've restarted the computer and google searched.  I need someone to explain it as if they were talking to a toddler.  The export button in the file dropdown is gray and cannot be pressed.

    ENJsGma
    Premiere Elements 12...what computer operating system is your Premiere Elements 12 running on? Be that as it may, after you have your Timeline content ready for burn to disc (assumed DVD-VIDEO standard or standard widescreen) on DVD disc....
    Tools
    Movie Menu
    .....now you should see a Choose A Menu dialog appear with a display of your theme choices
    .....you select a theme and then hit "Continue" to bring you into the Movie Menu customization area.
    Movie Menu Customization area
    ....here customize the menus, Preview to make sure the navigation buttons of the menus are working, then hit "Done" in the top right
    Clicking Done to the Movie Menu customization area will bring you to the following view
    Note the Publish+Share at the top right of the workpace. Click on that to bring up your export opportunities.
    If you goal is DVD-VIDEO Widescreen on DVD disc, then the burn dialog might look like this just before you hit the Burn button.
    Please review and consider and let us know if you are OK with the information provided. If not OK with the details, please let us know where you need supplemental details for what is not working for you.
    Thank you.
    ATR

  • Can't burn Disc from iTunes after Microsoft fix

    Okay ... long process to get iTunes working and I am almost there. Here is the saga ...
    I upgraded to iTunes 6.0 and after the upgrade neither of my CD/DVD drives would work. After surfing the internet, I found the solution on Microsoft.com, which was to delete some specific upper and lower filters from the registry and then reboot the computer. I did this and everything worked great. I was able to use iTunes and both my CD/DVD drives worked. But now .... I cannot burn any discs from iTunes, (I can burn from other places), it says,"cannot find recording disc" It will let me upload CDs into iTunes. Here is my CD diagnostics:
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Computer Corporation Precision WorkStation 350
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    Video Driver: ATI Fire GL E1 Video Accelerator\Fire GL E1
    IDE\DiskIC35L040AVVA07-0______________________VA2OA51A, Bus Type ATA, Bus Address [0,0]
    IDE\DiskWDCWD1600JB-75GVC0____________________08.02D08, Bus Type ATA, Bus Address [1,0]
    USBSTOR\DiskMaxtor4G120J6_________GAK8, Bus Type USB
    USBSTOR\DiskWD_____1200BB_External0602, Bus Type USB
    IDE\CdRomSAMSUNGDVD-ROM_SD-616T_________________F310___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomNEC_DVD+RW_ND-1100A____________________10GE___, Bus Type ATA, Bus Address [1,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
    The last failed audio CD burn had error code -128(0xffffff80). It happened on drive on -128(0xffffff80) media at speed 0X.

    hi TwinMom!
    hmmmm. was this the solution you used?
    (MS) CD-ROM access is missing and messages cite error Code 31, Code 32, Code 19, Code 39, or Code 41 after you remove Easy CD Creator in Windows XP
    i've seen a few follow up problems after applying that technique ... but usually they tend to involve this error message:
    "Warning! The registry settings used by the iTunes drivers for importing and burning CDs & DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
    what you're getting is still consistent with that (in a sense), because you don't have any itunes-related filter entries showing up in your diagnostics.
    so, let's start trying some techniques that have a reasonable track record against that error -43 that's showing up in your CD diagnostics.
    first, try a reboot and repair. reboot the PC (very important), and then do a repair install of itunes. go to your Add/Remove programs, select itunes, click "change/remove" and then select "repair".
    does that get rid of the -43?
    can you burn a CD after doing that?
    love, b

  • Can't burn discs. Error message: The disc can't be burned because the device failed to calibrate the laser level for this media     can't be burned because the device

    Cannot burn discs. Error message: "The disc can't be burned because the device failed to calibrate the laser power level for this media". Then the blank disc is ejected.

    Two main possible causes:
    1. Poor media. Verbatim DVD-R work best, burned at only 2x or 4x.
    2. Dirty lens. Try cleaning the superdrive with a proprietary CD/DVD lens cleaner that uses tiny brushes.

  • Cannot rip a cd with internal drive while burning disc with external drive

    Does anyone know why I cannot access any disc with my internal superdrive while Toast Titanium 11 is burning a blu-ray movie on my external drive?
    Drive that is being used to burn externally is a LG WH10LS30 model

    Pretty simple. You just can't do that.

  • Low lv access on /dev/sr0 in order to burn disc with continous beam

    Topic pretty much says it all but i'll elaborate.
    Goal: blackening a whole disc with a continous beam of the laserdiode in burn mode
    Backround: graphene-oxide exfoliation via laserlight (the laser is abused as a means to deliver an infrared highpower beam onto the surface,
                        in order to transform the layers of graphene oxide into sheets of graphene)
    Hypothesis: some godforsaken burn lib or tool in the *nix world must provide what i need. :-)
    Exclusions: pls dont recomment lightsscribe or qlscribe or anything like that, I am sure it is possible without that.
    Question: 1. is it clear what i am looking for?
                    2.  any ideas or pointers?
    Statement: I 've checked all kinds of channels so far no luck, i hope anyone here has tinkered with raw access on /dev/sr0 in order to help
    Thank You for listening
    p.s.
    as a sidenote
    this was the inspirational video
    http://www.youtube.com/watch?v=_oEFwyoWKXo
    they used lightscribe
    p.p.s.
    if anyone is wondering about the graphene-oxide
    my workgroup is working on an easy homemade synthesis
    based on:
    http://www.youtube.com/watch?v=lRDPZ8yL … e=youtu.be

    Difficult to understand why Disk Utility can be hard to find. It is listed in the Finder Menu/Services. You can also find it in your Applications Folder under Utilities.
    What Mac do you have and what version of OS X ?

  • Can't burn disc; need workaround

    Hi, folks:
    This is slightly off-topic-ish, but is IS Mac-related, so I'm hoping some smart bean here will have an idea.
    Here's the problem I'm trying to solve: I installed a game on my PS3 and it corrupted the drive. I installed the same game on my other PS3, and it corrupted the drive. (I sense a pattern here.) That second PS3 was given to me by my best friend before he killed himself, and contains a fortune in games, as well as hundreds and hundreds of hours of game saves. The PlayStation's own repair software is lame, lame, lame. Players have taken their drives out and repaired them using Windows boxes. I don't have access to one.
    But I can use Unix! Yay! I'll just download one, install it, and repair my discs, and then I'll be a happy girl!
    Boy, what a nightmare this has turned out to be. All Unix distros are .iso files, and I can't burn a single one to disc ("no mountable file system," "invalid argument," or else I got a couple of files onto a disc that are .efi files that're small that don't look as if they're complete installs). Found a terrific page telling me how to use the Terminal to get the files onto a USB stick, and I almost squirted, it seemed so easy! Alas, that's yielded a big fat goose egg, too: "Operation not supported."
    I've tried Ubuntu, Lubuntu, and Mint. I have no reason to believe that any other flavor will work, because invalid argument, no mountable file system, operation not supported.
    This shouldn't be that hard! I'm almost out of tears at this point. All I want to do it to repair my (FAT) disc. My Mac is old (2007 dual 2.8 Ghz) but it still oughtta be capable of doing this. I'm not trying to do anything fancy. ALL I want to do is to attempt to repair the one disc (and if it works, I'll tackle the other one) and then be done with it and get back to my gaming. I'm a disabled vet, meaning I haven't the resources to take it to a proper repair place (and I prolly just have a couple bad sectors. Most players do who've experienced what I have).
    Has anyone got any useful info for me? I'm at my wit's end. I'd be soooo grateful for some advice to get me going again.
    TThanks very much for anything you can offer.
    BInky

    -54 is a Permissions error that's right ...
    What are you trying to copy/burn ?
    What version of Toast are you running ?
    Remove the DivX QuickTime Plug-In and try burning again as it can mess up some burns ...

  • Can't burn disc via iTunes. Burn speed too fast. AGAIN!

    "iTunes can't burn this CD because the burn speed is too fast for your CD burner or media. Choose a lower speed in the burning pane of iTunes Preferences then try burning again".
    I have been having on going problems burning CD’s in iTunes for YEARS, and I know I am not the only one. I get the error message above. Having checked the forum at the time, and posted for help, I am know there is no real solution except to change brand of disc.
    Thing is, now I can’t get ANY brands to work. I’ve been through Verbatim, Maxell, JVC, Sony, but none work. The only brand that would work were TDK audios which I can no longer find anywhere.
    I know its not the burner, as Toast works fine, and I know I am not alone. Anyone got any ideas?
    Even after years Apple seem to be blanking this question. It’s very frustrating not being able to burn my purchased itunes downloads to disc.

    To anyone who is interested I think I may have found a possible solution. When you put a blank disc in the drive, wait about 30-60 seconds or so for it to stop spinning before burning.
    This seems to work. It's a bit sticky but eventually works. I tried both TDK & Maxwell discs and 9 out of 11 worked. Absolutely no reason why the other 2 didn't, but it's a lot better than none.

  • Can't Burn Disc Error Code -54

    What is going on? can anyone help? Every time i try to burn something in toast it tells me it can't burn the disc because i don't have the proper access permissions and displays error code -54 afterwards...

    -54 is a Permissions error that's right ...
    What are you trying to copy/burn ?
    What version of Toast are you running ?
    Remove the DivX QuickTime Plug-In and try burning again as it can mess up some burns ...

Maybe you are looking for