Can't burn DSP project on new Macbook Pro

Bought a new Macbook Pro, 2.53 GHz Intel Core Duo w/4 gigs of memory as a backup to my old G5. I open an FCP project created on my power mac G5. It opens normally. I export via Compressor which goes as planned. I author a DVD is DSP 4. It plays fine in simulation mode. When I burn the DVD there are loads of blackouts, most chapters have no audio, and the dvd players will even stall and lock up. Any help is appreciated. Thanks, Frank.

Using DVD SP 4 (4.1.2, 2005-2007). Output from FCP (5.1.4) via Compressor using DVD Best Quality, 4x3, 120 min, 2.5 Mbps 2 pass. Burned with DVD SP4. Simulation mode in DVD SP works fine. Burned disc has trbl in all dvd players as well as the Mac DVD players in my Macbook and my Power PC G5 (2004). I just opened same project on my G5, burned, and that disc works on all players.
I'm assuming my DVD SP4 is a non-UB version.
Thanks, Frank

Similar Messages

I can´t download skype to my new macbook pro, I can´t find it in the App Store, do you know why?

I can´t download skype to my new macbook pro, I can´t find it in the App Store, do you know why?

There are a number of developers who have chosen for various reasons not to offer their software through the Mac App Store, so don't assume that if an application is not in the App Store that the application is not available. It may well be available directly from the developer or some other download site. MacUpdate is a good resource for looking for applications:
http://www.macupdate.com
Regards.

Can't Connect Via Ethernet on new MacBook Pro

Hello,
I'm running into a frustrating problem and hoping someone can help.
I have a new MacBook Pro that won't connect via Ethernet. My old computer (Powerbook G4) with the same settings works flawlessly.
Details: under Network Settings I have Automatic/Using DHCP. When I click on Assist Me>Diagnostics, I get green lights all the way down (Built-In Ethernet, Network Settings, ISP, Internet, Server). The Diagnostics tool therefore proudly announces that my Internet connection is working correctly.
When I open Safari, however, it won't open any page. Using Ping I also get no responses.
When I plug the exact same ethernet cable into my Powerbook G4, everything works flawlessly. The only difference is that the IP address ends in .25 instead of .30 (I assume that's from the router assigning different IP addresses to the two computers.)
On another forum i read about someone having a problem with a long/lossy ethernet cable, but I just took my computer to the router and tried with a 2-foot ethernet cable. Same situation.
Help!
Thanks

i rebooted the firewall and it worked.

Can't burn any DVD on my macbook pro

I can't burn any DVD on my macbook pro, also some of previusly burned DVD are not recognized now & cant be mounted. I tryed choosing different software Burn, KKitchen, Titanium Toast 11, LiquidCD, NTIDragonBurn_v4_OSX, ExpressBurn_i (also burn from Finder) and different brands of DVD -- same diagnostics -- Medium error. One brand (TDK DVD+R) is unstable burn one or two disc tnan begin spoil DVD discs. Have you any solutions?
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,2
Processor Name:          Intel Core i7
Processor Speed:          2,2 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          6 MB
Memory:          4 GB
Boot ROM Version:          MBP81.0047.B27
SMC Version (system):          1.69f3
OPTIARC DVD RW AD-5970H:
Firmware Revision:          3APE
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          2048 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:          To show the available burn speeds, insert a disc and choose View > Refresh

Have you read this post? may help you
https://discussions.apple.com/message/18149044#18149044

HT1222 I can't remember the answers to my security questions because I made the account like 10 years ago. Because of this I can't purchase anything on my new MacBook Pro. Is there a way that I can get the answers emailed to me or reset them?

I can't remember the answers to my security questions because I made the account like 10 years ago. Because of this I can't purchase anything on my new MacBook Pro. Is there a way that I can get the answers emailed to me or reset them?

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
If all else fails:
Go to: Apple Express Lane;
Under Product Categories choose iTunes;
Then choose iTunes Store;
Then choose Account Management;
Press Continue;
Now choose iTunes Store Security and answer the bullet questions, then click Continue;
Sign in with your Apple ID and press Continue;
Under Contact Options fill out the information and advise iTunes that you would like your security/challenge questions reset;
Click Send.
You should get a response within 24 hours by email.

Hay guy, does any one here know what kind of games can i download/buy for my new macbook pro? and what should i look after before i buy any game?

Hay guy, does any one here know what kind of games can i download/buy for my new macbook pro? and what should i look after before i buy any game?

http://www.apple.com/downloads/macosx/games/

Can you put windows on a new macbook pro

can you put windows on a new macbook pro ? yes or no, which notebook can i put windows on if not the macbook pro?

WIndows 7 is the only Windows OS supported by the new Macs.
You usually use Boot Camp Assistant to partition the drive and install the Windows product on the Mac.
This creates a system where you boot into Mac OSX OR Windows.
see more at http://www.apple.com/support/bootcamp/
There are programs such as Parallels or VMWare Fusion that can create a Virtual Machine within Mac OSX - giving you access to both Operating Systems at once. You may get slight performance issues as you would be essentially running two Operating Systems at once.

How can I get 2tb in a new macbook pro

I want to get a new macbook pro but I would need it to have 2TB of storage since I do music production and I have tons of software and sounds/samples I need in my laptop. Can I make a new macbook pro have 2TB or would I need like a 17in macbook pro which I would have to find a used one

all 4 platter 2TB 2.5" HD are 15.2mm THICK. theres utterly NO WAY a single HD will fit in any macbook like that.
only option is a 1TB in the internal bay, and removal of the superdrive DVD/CD player and installing a secondary 1TB HD in the "optibay"
See OWC for the optibay option.
http://www.mcetech.com/optibay/
2.5" hard drive thickness and capacity
7mm = 500gig
9.5mm = 500gig up to 1TB
12.5mm = 1.5TB
15.2mm = 2TB
(however there are new HD just out that are 5mm = 500gig and 7mm = 1TB and 9.5mm = 1.5TB)
You have the POTENTIAL of 3TB in your macbook between 2 HD, however those drives are western digital, which I and most here wouldnt recommend. Also they just came out, and their reliability is UNKNOWN.

Can't reinstall Snow Leopard on new MacBook Pro

I had a old Macbook pro running Snow Leopard that died. I used Time Machine to restore to my brand new MacBook Pro. I decided to do an Archive and Install to start with a fresh system even though the new machine is working fine. The install disk is an early Snow Leopard release which loads fine, but when I run the install or try to restart from it, I get the Apple icon, but it never shifts to the installation process (nor can I check with Disk Utiity). Any suggestions?

There is no Archive & Install option for Snow Leopard. Instead, its installer offers a single "no brainer" option that replaces the existing OS (if there is one) with a fresh copy of Snow Leopard & leaves your existing user settings, documents, etc. untouched (if there are any). You can think of it sort of like doing an Archive & Install with an automatic reintegration of your user stuff from the archive, except that there is no archive & no Previous System folder full of now useless junk that you can't use with the new OS anyway. It automatically moves some known-incompatible software to an "Incompatible Software" folder (go figure!) at the root of the HD, automatically installs or skips certain items depending what is already on the HD (if there is anything on it to begin with), & does several other things that the old installer was too dumb to be able to do without a lot of tedious human help.
If you want to do an erase & install (which isn't usually necessary or desirable if you want to take advantage of all the advanced features of the new installer) you can do that too, but you must take the extra step of going to the Utilities menu, choosing Disk Utility from it, & using its Erase function to erase the volume before installing Snow Leopard on it.
Basically, it is as close to a "one button" installer as Apple can make it & far more sophisticated than any previous installer.

HT4007 How can I get Aperture onto my new Macbook Pro 15" Retina that DOESN'T have a superdrive from my 5 year old Macbook Pro? I still have the CD and serial number for Aperture. HELP! PLEASE!!

Like the thread topic says. I need help getting Aperture onto my new macbook pro that does not have a drive. I have no need for a drive after this to be honest just need my programs back on it. Thanks.

Two options:
Make a disk image or a clone of the installer CD on your Mac that has a super drive - you can create a disk image using Disk Utility or use Carbon Copy Cloner (if you have it) to clone the DVD to a thumbsdrive. Then run the installer on your MBY from this copy.
Or download the Trial Installer and install from there:
Download the Aperture 3.1 Trial. http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Aperture/061-8328 .20101020.AprE3/ApertureTrial3.1.dmg
Open the Aperture Trial disc image.
Double-click the "Aperture Trial.mpkg" file.
Follow the onscreen instructions to install Aperture.
After the installation completes, choose Software Update from the Apple () menu.
Install the Aperture 3.4 update from the list of available updates.
Regards
Léonie

Can't install windows 8 on new macbook pro retina display.

I spent my afternoon trying to install Windows 8 Pro on my new Macbook Pro with retina display. I get fairly deep into the installation process using bootcamp when I get a windows message that says something to the effect that windows can't be installed because the hard drive is not formatted in NTSF format. And that is the end of the line.

Welcome to Apple Support Communities
It's normal. Boot Camp Assistant formats the Boot Camp volume in FAT32 because in the past it supported Windows XP and it could use FAT32. This changed with Windows Vista.
The only thing you have to do is to choose the BOOTCAMP partition in this step, and select "Drive options (advanced)". Then, press "Format" and it will be formatted into NTFS, so press Next and the installation will start.
See the Apple's guide > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf

Can't load fcp studio on new macbook pro/os 10.6.2

I just got a brand new macbook pro and wanted to load my fcp studio 1 but it is saying I don't have the proper hardware. It want tell me exactly what hardware. I just bought this computer, so I can not understand the prob. Is it the operating system---OS 10.6.2?
I bought upgrade disks for fcp studio 2--what happens now? Has Apple made it so an older version of FCP isn't compatible with newer macBooks?

FCP versions 1, 2, 3, 4, 4.5 and 5 will only run on a PPC processor Mac.
FCP versions 5.1 and 6 will run on both PPC and Intel Macs.
FCP version 7 will only run on IntelMacs.
-DH

Can't install FCP on my new MacBook Pro

I just realize that I can't install FCP on my brand new Macbook Pro. Does anyone knows of any solution that would let me install FCP. According to the notes FCP will not install on Intel Core Processors.

It would be useful if you -
A. told us what version of FCP/FCS you are trying to install
B. told us the error messages you received
In the meantime, Final Cut Pro 5.0 and earlier are not supported on intel macs. Time to upgrade. If you have a regular retail version of FCP, the upgrade price is $299. Academic and Not For Resale versions do not qualify for the upgrade.
x

Can´t access Facebook on my new MacBook Pro

Hello. Yesterday I got a new MacBook Pro. First, I updated it to OS X 10.7.5 and everything works just fine, except that I can´t load Facebook, safari shows a message saying it can´t connect to server. I tried installing other browsers like Google Chrome and Mozilla Firefox but the same thing happens. The problem also happens with Twitter, every other website loads correctly.
I searched for Facebook in Google, and clicked on the first result which was Facebook in Spanish. https://es-es.facebook.com/ The log in page showed correctly. Then I tried typing my user name and password and clicking enter to log in and it stops working. The same message apears (safari can´t connect to server) with this url adress https://www.facebook.com/login.php?login_attempt=1.
Maybe this has to do with the fact that my MacBook is configurated in Spanish since I live in Latin America. I changed my language to English and the same thing happened but with Facebook from UK with the adress https://en-gb.facebook.com/ I still couldn´t log in.
I think it could be a DNS issue, but I don´t know how to fix it.
I would appreciate any type of help since I´m really excited with this new MacBook and I would really like to solve this problem. Thank you!!

You have 14 days to return the computer w/no questions asked. Plus you have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems.

Can't update iPhoto on my new Macbook Pro?

Hi guys!
I just got my new Macbook Pro a few weeks ago. I just got around to try to open iPhoto, but when I open it it tells me to update. When I download the update, it tells me that I need iPhoto 9.0, which I know is on the iLife '11 disc. However, I saw no need to purchase iLife and don't want to spend the money on it, as I will not need a new version at a later point... What can I do?
Thank you!

Have you moved iPhoto from the default location? If so, move it back.
Regards
TD

Can't burn DSP project on new Macbook Pro

Similar Messages

Maybe you are looking for