Can't burn dvd with lion any advice, heard to use toast

new to apple world, saw prior to lion you could burn movie to dvd in imovie. was now informed since i went currnet to start mac life i cant. any advice?

mft1, I just came across this old post, fixed the links and tried it. Success!
How to install iDVD from the internet
Download and install Pacifist from here ($20 shareware):
http://www.charlessoft.com/
Pacifist is a install package extractor.
Download an iDVD upgrade package from here (free!):
http://support.apple.com/kb/DL1353
When installing the upgrade package you will get an error saying the you have no qualifying application installed.
Do the following:
Use Pacifist to extract the iDVD.app file from the upgrade package to your Applications folder.
If you try to use iDVD now it will complain about missing themes.
First install some free themes from here: http://www.dvdthemepak.com/
If you open iDVD now you will see some gray themes below those you installed. Click on one. iDVD will update itself. Afterwards click on one of the gray themes again. iDVD will download those themes. (> 500 MB)

Similar Messages

To BALTWO:I really appreciate the fast sent solution about my failure to burn DVDs with Lion, but I am 89 years old and think I know something about computers, but don't have a clue about ZAPPing PRAM nor RESET SMC. I also can't find any evidence of a p

I really appreciate the fast sent solution about my failure to burn DVDs with Lion, but I am 89 years old and think I know something about computers, but don't have a clue about ZAPPing PRAM nor RESET SMC. I also can't find any evidence of a preserved earlier OS (Snow Leopard). I also don't know how to partition further my drive after all this time…(I used to have Parallels partitioned) but as I said I cannot find any where on the HD SN. Is it possible that it doesn't exist anymore? Not too technical, please, unless that is the only possible answer to this whole delemna..

Blue colored text in these forums usually indicates a clickable link. The two I posted in https://discussions.apple.com/message/18789716#18789716 bring up Apple's articles on those subjects. For partitioning information, peruse Disk Utilities help files, especially
Changing a disk’s formatting and partitions
BTW, the proper way to respond to a post is to use the Reply button and not start another. Good luck and hope you make it to your tenth decade—I'm in my eighth.

I can't burn dvd with os x mountain lion it crash all the time

no dvd burn with mountain lion

Like me???
If you try to burn and mount the InstallESD.dmg with Disk Utility on a DVD with 4.7GB capacity, maybe you get a similar error like this: There is not enough space on the DVD
Does anybody know a solution for this or should I burn the image on a DL DVD?
read this:
http://macbookproearlytips.blogspot.com/2013/06/how-to-burn-iso-mac-osx-lion-to- dvd-47gb.html

Burn dvd with Lion that plays on dvd player

I just got new imac version 10.7.3 LION...2.5GHz intel corei5, 4GB 1333 MHz DDR3 Desktop. It has no iDVD. I cannot use my old applic. install Disc that had iDVD ( iLife08) because when inserted, it says I can't open it because Power PC apps are no longer supported. NOW, an Apple Care tech. did not tell me that when Ijust talked to him. There is no way to get iDVD then for my new computer.
MY PROBLEM: I want to burn a dvd that will play in a DVD player. I created it from my dig. camera using iMovie. I tried to burn it to a DVD/RW but when inserted into two different DVD players, nothing. I then read I needed a DVD-R, and got that, but read that will not work on this computer either. I read of something called BURN which is some free software that does simple dvd's, but am afraid to download that and end up running in circles. I sure do not want to purchase some software for a rare occasion when I want to burn a DVD for a friend to play in his tv/dvd player.
Apple care was no help whatsoever.......that may have been a waste of money.
Soooooo, how please can I get my video from iMovie burned to a dvd that will be playable on a simple dvd player????? I still have my old computer in a closet. It seems absurd to think I must drag it out, hook it up and use that when I spent all this money for a new computer so I'd be in some cloud....I appreciate any help. Thanks ahead of time.

You can still buy the retail iLife 11 from a number of online vendors. It will include the latest version of iDVD.
A week ago it was available for about $40. Not any more. Get it while it's still fairly affordable.

Cannot Burn DVD with DVD Studio Pro 2

Help.
I can't burn DVDs with DVDSP 2.
Here's the error message :
"Recording Engine : Device is not supported for the requested burn operation."
Anyone else have this problem?
G5 Mac OS X (10.3.9)

Sounds to me like you have a LaCie d2 dual layer burner or one of the LaCie burners that has issues. LaCie has created an updated driver to fix this so check the support site:
http://www.lacie.com/support/drivers/index.htm
-Jake

Since iDvd is no longer supplied with Lion, what is best to use to burn to dvd for TV?

Since iDvd is no longer supplied with Lion, what is the best product to use to burn to dvd for TV from iMac? Is there a free solution?

Thank you very much for the link. I'm in the process of evaluating the trial version of a couple of products other than iDvd. Since iDvd does not have a trial, I was wondering if you could answer a couple of questions. Once I'm done, I plan on putting up the resluts of what I've found. Work is very busy this week, so I probably won't get a chance to work on this much until next week.
Anyway, I'm importing movies from my Sony Handycam DCR-TRV20. I've used iMovie to perform the download from the camcorder (the other products don't support this). The other products can work directly on the imported .dv files without having to export things from iMovie as a .mov file. I have not had time to see if there is a quality difference between a burned DVD with .dv clips vs. .mov imported from iMovie. So my questions regarding iDvd are as follows:
Can iDvd work directly on .dv files, or do you need to import .mov from iMovie?
If iDvd can work with these files directly, is it easy to do things such as clip them and do affects on them?
Is there a quality difference when viewing a burned DVD if .dv files were used vs. imported .mov files?
Since I have later versions of the iLife products than what comes packaged in the iLife that contains iDvd, can you install only iDvd in what is purchased from Amazon?
Thank you very much is you know the answer to any of these questions.

I can not burn dvds anylonger with my MacPro. Why ?

Hi everyone. I already posted this message in another thread but got no useful replies.
Configuration: MacPro Early 2008, MacOSX 10.6.8
I can not burn dvds anymore and do not know why. I can play dvds and cds though!
The following is the usual error message displaying after clicking the button burn :
I have run Disk Utility from the Install cd of Snow Leopard and the small things which needed repairs have been repaired.
I have reset the PRAM and the SMC (System Management Controller). Nothing.
I have set up a new user account with admin privileges but it did not work.
Please, note that I am trying to burn the same Kodak Pro dvds for photo and data archival that I burned in the past in the same MacPro.
I am actually burning my dvds using my MacBook Pro connected with my MacPro through Airport but it's a very slow process, of course.
Any piece of advice ?
Thank you !
Paolo

Hi everyone. I already posted this message in another thread but got no useful replies.
Configuration: MacPro Early 2008, MacOSX 10.6.8
I can not burn dvds anymore and do not know why. I can play dvds and cds though!
The following is the usual error message displaying after clicking the button burn :
I have run Disk Utility from the Install cd of Snow Leopard and the small things which needed repairs have been repaired.
I have reset the PRAM and the SMC (System Management Controller). Nothing.
I have set up a new user account with admin privileges but it did not work.
Please, note that I am trying to burn the same Kodak Pro dvds for photo and data archival that I burned in the past in the same MacPro.
I am actually burning my dvds using my MacBook Pro connected with my MacPro through Airport but it's a very slow process, of course.
Any piece of advice ?
Thank you !
Paolo

Can't burn DVD's with Tiger

Since I installed Tiger, I can't burn DVD's using either Toast 6.1 or the native Apple burning software. I keep getting "Mismatch at byte...sector9. Verification failed." I am trying to back up a variety of files. I can burn CD's on my iBook G4, but I can't burn any DVD with any kind of content on my Pioneer. I tried PatchBurn with no success. Any suggestions? TIA. --- Dave

My guess is your Pioneer drive is connected via Firewire or USB 2. The OS 10.4 install or updates may have caused some problem with the Firewire or USB 2 communication with the drive. Oftentimes these problems are fixed by applying Apple's Combined System Updater. In your case that is the 10.4.4 combined update. It doesn't matter if you are already running 10.4.4.
Otherwise you may need to do an archive and reinstall of 10.4 to get the link working properly.

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

STILL can't burn DVDs on Mac OS 10.6.5 after trying everything

Hi there.
Ever since I've updated to 10.6.5, I can't burn DVDs, doesn't matter which brand or what software I use. however, I am able to burn CDs. I went to my local Apple Store and they booted OS 10.6.3 on my computer via firewire and what d'you know ? it burnt a dvd right away. this is clearly an issue with the latest update. I did as they said, reseted my PRAM and even re-installed the latest update (I downloaded the 10.6.5 combo version from Apple Support).
Is anyone experiencing the same ? I know a lot of people had the same issue couple of weeks ago. did anyone successfully overcome it ?
cheers.

This is an older post from the Roxio Community (http://forums.support.roxio.com/topic/39824-toast-burns-cd-but-not-dvd-on-mac/); but seems like similar problem - maybe worth a try:
Either something is preventing the data from being sent to the drive's DVD-writing laser or the drive's laser is failing to start writing the disc. The only thing you can do with Toast is trash the plist and prefs files in the User>Library>Preferences folder and relaunch Toast. You might get a laser-cleaning disc for your drive. (A different laser is used to write CDs than is used to write DVDs). Also try choosing Save as Disc Image with Toast and burn the resulting disc image using the Image File setting in the Toast Copy window.
Note that the laser cleaning idea was also mentioned in the previous link provided. Have you tied that? - would be nice if a simple solution worked.

I have iMac and need a good photo editing program to use. Reviews say aperture runs really slow with Lion, any suggestions?

I need a program where I can remove objects and touch up dead grass, etc.

Reviews say Aperture runs really slow with Lion, any suggestions?
To add on to Corky02 answer:
The recent Aperture release AP 3.3.x is very efficient, both on Lion and Mountain Lion. But you need a decent hardware to support it. The older Macs will have problems with the storage and CPU requirements. For good performance on large raw images plenty of RAM is important, at least 4GB, but 8GB would be much better, and your library should be on a fast disk, preferably on an internal drive. And don't let the system drive get too full.
Many reports about Aperture being slow are due to putting the Aperture library onto slow disks or acessing the original image files over the network, insufficient RAM, or corrupted or ill-designedAperture databases.
Aperture excels at all kinds of image processing that can be considered image developement - raw processing and color/lighting adjustments, but does not do compositing. If you are shooting raw and want professional image developement I'd recommend to do this in Aperture and not in iPhoto - you will have much more control over this in Aperture (after a steep learning curve). You can also repair and retouch the image to correct minor blamishes. For graphics compositing and inpainting you can set up an external editor and send your images from Aperture to this external editor - any of the editors Corky recommended would be o.k. for this.
To see, if you will want the advanced image processing in Aperture or the easy to use, more basic options in iPhoro will be sufficient to you have a look at the Aperture User manual, or the tutorial on the support page: Aperture Support
But Aperture is a professional apllication, not "plug and play". You should only consider it, if you are willing to spend some time on learning to use it properly and are willing to work your way through the manual.
Regards
Léonie

I can't burn DVD's on DVD Studio Pro since I install Snow Leopard

Well, my computer was working great, I had tiger installed and I decided to update to snow leopard and "big mistake" since then I haven't been able to burn DVD's from DVD Studio Pro, at the time to start writing the information to burn it, it shows a message saying " the recording device reported the error #6. Unknown device error. I connected and external dvd burner and when is time to burn it says "The recording device reported the illegal request. Unknown device.
I can easily burn DVD's from iDVD what makes me believe the problem is not with the burner. I went to Melrose Mac and they told me there is a conflict between FCS and Snow Leopard, they suggested to install Leopard instead, he mention many people has complain about the same issue Can that be possible? I got something thinking my computer was going to work better and I screwed it up!

Did you also upgrade DVD Studio Pro?

Can't burn DVD

Dear,
I can't burn DVD +R with my macbook pro. Bought verbatim, sony, fujifilm dvd's nothing works.
An error shows up in toast something like this:
Sense Key = Medium Error sense Code = 0x73, 0x03
Kind regards,

I don't burn dvd's very often, so the challenge is to remember when I do.
Just remember that a disk image is like a "virtual disc", so you want to make Copy using the Image File.

My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no error

My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no errors.
I tried to reinstall driver.
I downloaded new codec
I tried Microsoft FIX IT
Nothing worked.
Need some help.
Thank you!!
Paul

Hi Albos, This is a known problem. These superdrives die after a while. See the various threads on this site and the internet. I have the same problem with my Imac 20" 2.16 ghz. Just wants to burn and read cd's. Its has to do with the laser. For DVD an CD are two different laser and the one for DVD's has probably died in yours (as it did in mine). I bought an external LG burner and problem solved. (And a lot cheaper than replacing the superdrive)
Hope this helps you.
Robert

I can't burn DVD's

Hi,
I can't burn DVD's.
My Matshusita DVD unit can read it without problems but when I insert a blank DVD to burn it, Finder doesn't open and I can't do it.
My Imac seems to recognize it because I could see DVD characteristics at discs utility.
Please, could you give me some advice?
Thanks.
Nasrau

Hi Damien,
I have "Use finder" when I insert a blank Cd or DVD in "CD's & DVD's" System profile.
My Imac is:
Nombre del modelo: iMac
Identificador del modelo: iMac8,1
Nombre del procesador: Intel Core 2 Duo
Velocidad del procesador: 2,66 GHz
Número de procesadores: 1
Número total de núcleos: 2
Caché de nivel 2: 6 MB
Memoria: 2 GB
Velocidad del bus: 1,07 GHz
Versión de la ROM de arranque: IM81.00C1.B00
Versión SMC (sistema): 1.29f1
Número de serie (sistema): VM848RXSZE6
UUID de hardware: 31403C7F-317E-5A1A-97D4-CE0525E36892
My DVD Unit is:
MATSHITA DVD-R UJ-875:
Revisión del firmware: DB09
Interconexión: ATAPI
Soporte de grabación: Sí (unidad enviada por Apple)
Caché: 2048 KB
Leer DVD: Sí
Grabar CD: -R, -RW
Grabar DVD: -R, -R DL, -RW, +R, +R DL, +RW
Estrategias de escritura: CD-TAO, CD-SAO, DVD-DAO
Soporte: Para mostrar las velocidades de grabación disponibles, introduzca un disco y seleccione Visualización > Actualizar.
I am using Snow Leopard.
Thanks in advance.
Regards,
Xavier.

Can't burn dvd with lion any advice, heard to use toast

Similar Messages

Maybe you are looking for