Can't burn project to DVD from Premiere Pro CS5.5

Hello to all the experts out there!
We have been having ongoing issues attempting to burn our finalised project in Premiere Pro CS5.5.
We have tried many of the suggestions found in the forum, including changing file names, checking for gaps in the timeline, changing DVD discs, exporting as an MPEG file (always says unknown error), sending to Encore via Dynamic Link (goes 3/4 way through transcoding and freezes every time), installing Roxio updates etc etc.
We still can't get the project to burn to disc and I am not sure where to go with it next.
Its a 34 minute project, and have been able to export up to 24 mins of it, so I suspect there is a problem with something in the end of the timeline but just can't work it out.
Does anyone have any tips, pleaseeeee!???
Cheers,
Georgi

>and .jpg files
Photo Scaling for Video http://forums.adobe.com/thread/450798
-Too Large May = Crash http://forums.adobe.com/thread/879967
As well as the below, right click the Encore icon and select Run as Administrator, which is NOT the same thing as running the computer with the Administrator account, and which fixes several "odd" problems... To create a two layer DVD (or a BluRay?), you MUST have Encore set to use the Run as Administrator option
Run as Administrator http://forums.adobe.com/thread/771202
Odd Errors http://forums.adobe.com/thread/670174
Long File Names or odd characters cause problems
Read http://forums.adobe.com/thread/588273
And #4 http://forums.adobe.com/thread/666558
And This Message Thread http://forums.adobe.com/thread/665641
CS3 (maybe later?) Two Layer Problem http://kb2.adobe.com/cps/407/kb407236.html
Encore "No Drive" Error http://forums.adobe.com/thread/569230
Things and Software to AVOID when authoring/burning a DVD
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc (send the author a PayPal donation if you like his program)

Similar Messages

  • Can you burn an AVCHD DVD using Premiere Pro 4.1?

    Alright I've been hunting the forums and net for a few hours on this one question.
    I import my AVCHD video files using Sony Picture Motion Browser for the HDR SR-12 using the full HD setting (1920x1080i) I then pull these into Premiere 4.2.1 and have created an edit, my question is, it possible to output to an AVCHD DVD i.e. a standard DVD-R with the AVCHD edit on it from Premiere/Encore?
    It's easy to burn clips straight to AVCHD DVD using Sony PMB, but not an edited file.
    I realize there are no menus possible if you do it this way, but I have an AVCHD capable DVD deck and an HD Capable screen and would really like to see how this looks. Anybody know any tricks or workarounds for this? It seems that this would be sadly lacking if it was not possible or simply an effort to force one to adapt the entire workflow to Blu-Ray for HD content which I am not prepared to do.
    I am assuming that if you could export the same file type that came in (i.e. AVCHD .mts files) that you could then have Sony PMB burn it to AVCHD DVD but I haven't figured out how to export it as such as there is only Blu-Ray output options.
    Any help, tips or tricks would be appreciated!!!!
    Regards,
    DSW

    Answering myself here for the benefit of anyone else trying to solve this problem.
    I have been pulling my hair out trying to solve this problem for the last 48 hours of utilizing AVCHD footage at AVCHD quality. I finally did find somewhat of a work around, but it requires Adobe PP CS4.2.
    There is a plug-in here:
    http://www.mainconcept.com/site/prosumer-products-4/mpeg-pro-hd-7850/features-7861.html
    Which will actually output your edit as an AVCHD file. You can then burn this straight to an AVCHD using Nero 9 and keep the highquality level of your clips and not need Blu-Ray. The DVD player will need to be AVCHD capable, but I just bought one of those for $40 as compared to the $200+ of most Blu-Ray players.
    Or if you want to be really sneaky, you can transfer it back onto your camera and play it straight to your TV using the HDMI cable.
    Hope that helps anyone stuck with the same problem.
    Regards,
    DSW

  • How can I go from Premiere Pro CS5 to After Effects CS6? (Problem)

    Hi,
    I am trying to send my clip from Premiere Pro CS5 to After Effects CS6, but when I right click on the clip, I can't even select the option to send it to After Effects. I can see the option to send it to After Effects, but I just cant select it. Any ideas?
    Thanks,
    -Billy

    You can do what you want... only going the other way!
    You can import a CS5 Premiere Project (in its entirety
    or a selected sequence) into CS6 Ae.
    In CS6 Ae:
    File>Import>Adobe Premiere Pro Project...
    Navigate to your CS5 Premiere project, double-click
    and select 'All Sequences', or your preferred sequence.
    As Jim points out, Dynamic Linking will only work
    between matching versions of Pr and Ae.

  • How to use VST Plugins from Premiere Pro CS5 in Adobe Audition 3.0 ?

    I have tried to use VST plugins from Premiere Pro CS5 into Adobe Audition 3.0, but could not use it.Is any method to use them ?

    Unless I'm mistaken, you can't do this at all - Adobe lock all their VST effects so that they only work with the app they were intended for. Which also means, of course, that you can't use Audition VST plugins with any other software either. Since Audition isn't currently in the CS, there isn't even an exception there, I suspect.

  • How can I import MP3 audio files into premiere pro cs5?

    Can any one help?
    How can I import MP3 audio files into premiere pro cs5?

    It is really difficulty for me.If you still haven't found a satisfactory answer,please search it on google.Hope you can get your answer as soon as quickly!
    fifa 14 coins
    cheap fifa coins

  • Burning DVD from premiere pro timeline

    Is it possible to burn a project from premiere pro timeline directly to DVD without encore?
    thanks
    arikw

    >trying to get as much info as possible.
    Here Tutorials
    http://forums.adobe.com/thread/913334
    http://forums.adobe.com/thread/845731?tstart=0
    -and http://forums.adobe.com/message/3234794
    A "crash course" http://forums.adobe.com/thread/761834?tstart=0
    A Video Primer for Premiere http://forums.adobe.com/thread/498251?tstart=0
    Premiere Tutorials http://forums.adobe.com/thread/424009
    CS5 Premiere Pro Tutorials http://forums.adobe.com/message/2738611
    And http://blogs.adobe.com/premiereprotraining/2010/06/video_tutorials_didacticiels_t.html
    And http://blogs.adobe.com/premiereprotraining/2010/06/how_to_search_for_premiere_pro.html
    CS5 Tutorials http://bellunevideo.com/tutlist.php
    PPro Wiki http://premierepro.wikia.com/wiki/Adobe_Premiere_Pro_Wiki
    Tutorial http://www.tutorialized.com/tutorials/Premiere/1
    Tutorial http://www.dvxuser.com/V6/forumdisplay.php?f=21
    Tutorial HD to SD w/CS4 http://bellunevideo.com/tutorials/CS4_HD2SD/CS4_HD2SD.html
    Premiere Pro Wiki http://premierepro.wikia.com/wiki/Main_Page
    Exporting to DVD http://help.adobe.com/en_US/premierepro/cs/using/WS3E252E59-6BE5-4668-A12E-4ED0348C3FDBa.h tml
    And http://help.adobe.com/en_US/premierepro/cs/using/WSCDE15B03-1236-483f-BBD4-263E77B445B9.ht ml
    Color correction http://forums.adobe.com/thread/892861?tstart=0
    Photo Scaling for Video http://forums.adobe.com/thread/450798?tstart=0
    -Too Large = Crash http://forums.adobe.com/thread/879967?tstart=0
    After Effects Tutorials http://www.videocopilot.net/
    Authoring http://www.videocopilot.net/tutorials/dvd_authoring/
    Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
    And more Encore http://library.creativecow.net/articles/devis_andrew/
    Surround Sound http://forums.adobe.com/thread/517372
    CS5 User Guides - online and PDF (right click PDF link to save PDF to your hard drive)
    http://blogs.adobe.com/premiereprotraining/2010/08/help-documents-for-creative-suite-5-pdf -and-html.html
    Run as Administrator http://forums.adobe.com/thread/771202?tstart=0

  • Exporting from Premiere Pro CS5 and DVD authoring

    I have a reoccuring problem with Premiere Pro and authoring DVDs. This is how it goes.
    I shoot a video using a Canon 5D Mark III. 1080p 24.
    I then edit in Premiere Pro CS5, with proper settings on the sequence which are the preset Digital SLR > 1080p > DSLR 1080p24.
    Everything is hunky dory.
    Then I have to export...and the frustration ensues...
    I export using the HDTV 1080p 24 High Quality export preset with the H.264 export codec. This gives me a decent .mp4
    I then bring this file into Encore and author the dvd. I used the regular dvd and the blue ray export settings as a test, but the video always ends up looking horrible with artifacts all over the place, especially on areas of high contrast. It looks like a badly compressed .jpg.
    This happens at various times when exporting animation/motion graphics from After Effects also. When I use a ramp in the background, the gradient is often very banded...
    When I rent a movie from the video store, the images and type look good on whatever i play the dvd on or watch it through. When I burn a dvd, it looks universally bad using all kinds of players on all kinds of monitors, projectors, etc...
    Can anyone lead be in the direction of an article or video that will thoroughly explain this so i can learn it once and for all?
    Thanks in advance.

    Jim, lol.
    Thanks everyone as usual.
    So, should my composition settings for after effects be set to 24 or 23.976 and can i render them as 16 bit?
    Will this reduce the banding and artifacts along with using dynamic link? Or will it ultimately be 8 bit by the time the dvd is burned and go back to the banding....?

  • Can't send audioclips to audition from premiere pro

    Hi,
    i can't send audioclips to audition frome premiere, must do all by hand! Who does know a solution?@

    WEr soll da was wissen? Das ist ein völlig sinnfreier "Geht nicht!" Post ohne jegliche technische Informationen - system, Projekteinstellungen, Versionen und so weiter.
    Mylenium

  • Importing from premiere pro cs5 to after effects cs5

    hi, can anyone help me with this problem?
    im editing some stuff in premiere pro cs5 and when i import it into after effects cs5 for colour correction and other effects all the transitions that i had from premiere will disappear. if someone can guide me step by step to this process it will be very helpful
    Thanks,
    Randolph Azzopardi

    As Mylenium suggests, there are many ways to move information between Premiere Pro and After Effects.They are all outlined on this page: "Working with After Effects and Premiere Pro"
    You didn't specify, but I'll assume as he did that you are exporting a Premiere Pro project from After Effects. That works by converting things from native After Effects to their equivalents in Premiere Pro; sometimes there isn't a good equivalent, so the conversion isn't perfect. The same conversion is done as is done for copying and pasting between After Effects and Premiere Pro. There's a set of tables that describe the conversions here.
    The way to get perfect fidelity is to either use Dynamic Link (as Mylenium suggested) or render and export a movie from After Effects and import that into Premiere Pro.

  • Digital Classroom Lesson Conversion Problem from Premiere Pro CS5 to CS5.5?

    I have the book Premiere Pro CS5 and CS5.5  Digital Classroom.  The project lessons on the dvd do not convert for use with my Premiere Pro CS5.5 program.  Has anyone had this issue and found a resolve?
    Thanks
    jim

    I did copy the lessons to drive and tried to open project then this comes up:
    This project was saved from a previous version of Adobe Premiere Pro and must be converted.  The original project file will not be modified.  Continue?
    It gives you a file to convert.... but it does not convert.  That is there is a project in form but no videos or images.
    Importing the project will skip the question above but end result the same.

  • Poor quality on movie after exporting it from Premiere Pro CS5.5

    Hi!
    As a part of my bachelor thesis in industrial engineering, I am making an animation that shows how different types of water turbines work.
    The animation it self,  I've created in a program called Autodesk Inventor. From Inventor I get an uncompressed video. This video is usually not possible to open directly, but when I convert this with FreeMake video converter, it works
    Conversion in FreeMake:
    From:
    RAWVIDEO
    1280 * 720
    16:9
    663,554 Kbps
    30 fps
    To:
    . Avi, mpeg4
    1280 * 720
    16:9
    3283Kbps
    30fps
    The video looks great now, but now when i have finished editing the film in Adobe Premiere Pro CS5.5 and exported it, the lines are very blurred and bad. I've attached a picture showing what I mean. I have tried many different settings in Premiere, but i cannot get it any better.
    The picture on the left is after exporting, the image on the right is after converting it in FreeMake Video Converter.
    Have tried with the flicker removal, but with poor results.
    Does anyone have any tips on what I can do?

    Thank you for the warm welcome
    Yes, the video from autodesk is uncompressed avi. These files are impossible to import in Premiere, and i cant open them in either VLC or WMPlayer.
    After a conversion with FreeMake VideoConverter they are possible to import, and they look very good in VLC.
    My Sequence settings are:
    Editing mode: HDV 720p
    Timebase: 29.97 frames/second
    Video:
    Frame size: 1280*720
    Pixel Aspect ratio: Square Pixels (1.0)
    Fields: No fields (progressive scan)
    Display format: 30fps Drop-Frame Timecode
    Audio:
    Sample Rate 48000Hz
    Display format: Audio samples
    Video Previews
    Preview File format: I-Frame Only MPEG
    Codec: MPEG I-frame
    With: 1280
    Height: 720
    Maximum bit depth and Maximum render quality is checked.
    I have tried with a variety of export settings, but my current ones are:
    Output:
    Format: Quicktime
    Video Codec: H.264
    1280*720, 29,97 fps, Progressive, Quality 100, 48000Hz, Stereo, H.264
    Aspect: Square Pixels
    Render at maximum depth
    Depth: 24bit
    Use maximum render quality.
    One thing I find quite strange is that i have to short clips at the beginning, which both seem fine.

  • Upgrading from Premiere Pro CS5.5 to CS6

    I have Premiere Pro CS5.5 as part of Adobe Creative Suite 5.5 Production Premium.  I just purchased Premiere Pro CS6 upgrade but when I try to register I select Premiere Pro CS5.5 as my qualifying product upgrade and enter the SN from Creative Suite 5.5 Production Premium that contained PP5.5 but I get the message that I need a qualifying product.
    I would think it would recognize that I have PP CS5.5.  Should I have upgraded to Adobe Creative Suite 6 instead of just upgrading Premiere Pro?

    What Mylenium said.
    http://www.adobe.com/products/creativesuite/faq.html#purchasing-policy
    "Am I eligible for upgrade pricing from a previous Creative Suite edition to a standalone CS component?
    No. You cannot upgrade from a Creative Suite edition to an individual CS component. To confirm your options and learn about the requirements for upgrades, check the upgrade eligibility chart on the buying guide page of the product you wish to purchase."

  • Exporting to AVI from Premiere Pro CS5.0.2 from DVCPRO HD sequence giving only 1 frame?

    When trying to export from a P2 1080i 60hz DVCOPRO HD timeline to an AVI, whether going to queue or direct export using AME, it is going through its encoding steps but I am ending up with only one frame of let's say a 2 minute sequence. I've used Uncompressed AVI preset as well as Microsoft AVI preset - both going to 720 x 480.
    Happens with and without using Maximum Render Quality setting.  Happens whether I have MPE on or off.
    Couldn't find anything in the forum....have the Premiere Pro CS5.0.2 update.  Help.

    Unfortunately, the poster cannot award themselves "points." Otherwise, Harm and I would have over 50,000!
    Glad that you got the answer and the fix.
    Good luck,
    Hunt

  • Audio problems when exporting files from Premiere Pro CS5

    I try to post in English.
    I have audio problems in Premiere Pro CS5 when exporting a film.
    I cut an interview. The sound seems not to be synchronized when exporting a file. It doesn´t matter what file format I export. On cutting points the sound is different to the sound I hear in premiere. In premiere the audio sounds very good but in exported file I hear cracks on cutting points.
    When I reimport the audio file an put it in the timeline the synch point is correct but the interview differs about 2 frames to the original audio in premiere.
    The material was filmed on Sony ex3. The files are XDCam HD. I have updated the production suite.
    Thanks for answers
    Frieder

    Also, make sure that you check the box marked "Export Audio" if you want a MP4 extension.

  • Can't burn project to dvd successfully

    I have PSE 12 both organizer and Premiere. I've completed a movie project after first working up a slide show in Organizer but when I tried to burn my dvd the program did not recognize my burner (which is LG's HL-DT-ST GH24NS50 SC SI) so I burned to a folder. Then tried to burn with both Windows DVD maker and Wondershare Video burner neither of which recognised the files containing the movie titles & scene intro-s. A 2nd problem has also developed during the process of completing the project. My PSE organiser now crashes as soon as it loads the media so I'm now virtually locked out of my photos. The only new files added to the organizer since I started this project are those coming from Premiere ie narrations etc.Can anyone suggest a way to fix these problems. Thanks

    Hi
    I am happy to report that I have successfully produced my DVD (with your help). Also in relation to my PSE 12 organiser problem, your suggested solution didn't work but I found the following through a Google search -
                   Anwesha Dev Chaudhary     17/11/2014 4:00 AM    (in response to rouquine)    
    Hi,
    Please try following things:
    While launching Organizer, keep SHIFT key pressed.
    This will open Catalog Mamager.
    Now Click on NEW and create a new catalog.
    If Organizer Launches, open preferences (Ctrl +K) > Go to Files Tab and Uncheck the following:
    Automatically Search for and Reconnect Missing Files
    Automatically Generate Thumbnails for Video files
    On doing this, going to Media Analysis tab and un-check the Auto Analyzer options.
    Please let me know if organizer still crashes.
    Thanks,
    Anwesha
    I tried this solution and whilst the organiser would not launch from the start ICON, I managed to get it to start from the Premiere Editor. I carried out these instructions and then tried again to relaunch from the icon. This time successfully. So here's hoping that my luck holds. Thanks to you both for your help.
    Regards
    Garrysen

Maybe you are looking for