Can't burn with iTunes 8.2 or 9.0-- songs sound fuzzy
Recently, when i bought my iPod Touch, I was instructed to update to iTunes 8.2; upon doing so, I found I could no longer burn CDs; the songs all sounded fuzzy. Today, I updated to iTunes 9.0, and the same thing happened: the songs all sounded fuzzy on the burned CD.
Other things you should know:
(1) I tried to burn a CD using Windows Media Player; those songs sound fine. Thus, I have reasonable assurance the problem is with iTunes.
(2) For some reason, I have no problem burning CDs with my laptop (which I also updated to iTunes 8.2).
Can someone help me out with this? (And please don't say to download it again. I downloaded 8.2 twice and now 9.0 once, and nothing has improved.)
Thank you for your anticipated assistance.
MRD
Fuzz or static on iTunes-burned audio CDs can often be corrected by burning at a lower speed, such as 2x.
Similar Messages
-
I get an error when player loads that says regestry for burning is missing and tells me to redownload Itunes but nothing works.
I've had the same problem on my windows vista system. I can't say that I have a solution but there is some good information about this on this apple discussion page. Search this topic: Itunes Won't Burn Audio CD - Slow!
I posted on this same issue last night. Right now I have the most recent post. You can check your symptoms against mine to verify that you have the same problem. My post is very detailed.
That's all the help I can provide right now. If you find a solution let me know. -
Burning with Itunes error - Error 2380
Well to start I am only having problems burning with itunes, Nero7, windows media player, everything but itunes burns cds like a champ... Infact I have am finishing my 160th burned CD as I write this have yet to get a single coaster. I am running my dvd/cd burner off one of my sata ports while I have 2 dvd drives off my IDE port.
Any help, comments and suggestions is appreciated.
I have tried the following:
1. uninstall and reinstall itunes (that was a huge mess but still no go)
2. Blank disk in and try the CD/DVD Diagnostics (see below please)
3. Completely remove and reinstall all 3 optical drives including the drivers.
**Diagnostics**
Microsoft Windows XP Professional x64 Edition Service Pack 1 (Build 3790)
System manufacturer System Product Name
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.1
UpperFilters: GEARAspiWDM (2.0.6.1),
Video Driver: NVIDIA GeForce 6600\GeForce 6600
IDE\DiskWDCWD2500KS-00MJB0____________________02.01C03, Bus Type ATA, Bus Address [0,0]
IDE\CdRomLITE-ONDVDRW_SH-16A7S__________________WS04___, Bus Type ATA, Bus Address [1,0]
SCSI\CdRomSONY___DVD-ROM_DDU1615GYS1, Bus Type SCSI, Bus Address [0,0]
SCSI\CdRomTSSTcorpCDW/DVD_SH-M522CTS07, Bus Type SCSI, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
*Additional Computer specs* (doubt you need this but here you go)
Asus PB5 deluxe w/ wifi motherboard (Bios is current)
Intel E6600 Core 2 Duo (overclocked 4.125)
G-skill memory 3gb (PC-800)
Western Digital HDs (2.2 terabytes)
Multi OS running *Linux, Win xp x64, Vista Rc1(about to wipe awaiting upgrade launch)
Custom build Other OS Windows Xp x64 Pro - Overclock custom buildJust to point out the TssT is a samsung cd burner and the Lite-on is a cd/dvd burner and neither will work with itunes but i can burn on both but my preference is the lite-on burner due to its lower error rate and it has lightscribe also.
-
I have windows 8 enterprise OS and iTunes ver. 10.5.0.142. I was upgrading my iPad to IOS 6.1.3. After finishing the upgrade my iPad Reboot and currently stucked-up in a plug-in screen and iTunes Logo. When I try to connect it to the iTunes pop-up message appear saying " iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes." In short, I push the restore button then another pop-up message appear saying " The iPad software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later." I tried many ways but still no luck. I repeatedly reboot the iPad and open the iTunes still the same problem. I try also to uninstall the iTunes and installed the lower version but still the same problem, I even check the firewall if the ITunes was block or My privileges is administrator to run the iTunes or even reset my winsock but the problem still remain. PLEASE HELP! Thank you in advance!!!
Turn off your firewall and antivirus software.
-
Went on a Vegas trip on Sept
11th. My iPad worked fine
before getting on the plane. In the hotel about 48hrs later I opened my iPad it
read the message: “iPad is disabled,
connect to iTunes.”
To my knowledge myself, nor anyone else has tried to access my device or
entered the password incorrectly 3 or more times.
I started by updating my iTunes account on my computer to the latest version.
Then multiple times I attempted
the “Use recovery mode”
steps.
e.g.
1. Turn off your device and leave it off.
2. Plug in your device's USB cable to a computer with iTunes.
3. Hold down the Home button on your device as you connect the USB
cable. Keep holding down the Home button until you see the Connect to iTunes
screen.
I received the message on my computer saying “iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes.”
I click the “Restore iPad” button.
During which time the progress bar on my computer’s iTunes
screen was moving very slowly and other times seemed like it wasn’t moving at
all. I would leave my two devices and attached by the cable and upon returning
I would find that the process would have ended before it had completed.
Initially I thought it was a connections issue because I was in remote
locations with slow internet servers. Since being home I have re-attempted the
process and have been able to fully complete the forced recovery but I will
receive a message saying:
“The iPad could not be restored. The disk you are attempting to use is full.
Removing files and emptying the recycle bin will free up additional space.”
What recycle bin is the message referring to? Obviously I CANNOT access any
data on the iPad itself. Just for the **** of it, I did empty my computers
recycle bin and re-attempted the forced recovery process but as I suspected it
did nothing for the iPad and I still received the same message: “The iPad
could not be restored. The disk you are attempting to …”
Please helpHere's a couple of Apple Support articles ...
Resolve iOS update and restore errors
If you can't update or restore your iPhone, iPad, or iPod touch -
ok, so i finally found my ipod. I pick it up and it asks me if i would like to download the latest ios6 software so i did. Then moments later it died, ran out of battery. So i pluged it into my computer via apple usb cord. Then this is what itunes says "iTunes has detected an iPod in recovery mode.You must restore this iPod before it can be used with iTunes". All i want is to get my notes from the utilites section there so important to
If i restore it will my notes still be there, i dont want to restore original settings or something like that .
please help me what do i do?You have to restore the iPod, no ifs, ands, or buts...
After iOS is installed you will be asked if you what to set it up as a new iPod or if you want to restore from a backup.
If you have a good backup you can restore that and you're good to go.
If you don't have a good backup, then you end up with a "clean" iPod.... -
I've updated to IOS6 and now i couldn't open any apps and they're automatically close. And can't sync with itunes properly.. Help me!!
Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
I have a ipod classic 80Gb version 1.1.1 pc , but I can't sync with iTunes . Please give a solution.
Dear sir,
I have a ipod classic 80Gb version 1.1.1 pc , but I can't sync with iTunes . Please give a solution
Yours faithfully
VineeshHello Vineesh
Try out the troubleshooting assisting below to get your iPod Classic to start syncing again properly.
iPod classic Troubleshooting Assistant
https://www.apple.com/support/ipod/five_rs/classic/
Regards,
-Norm G. -
my ipod can't sync with itunes.Keeps saying that itunes was unable to load data class information from sync services
See TS2690: iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert.
tt2 -
my ipod can't sync with itunes.Itunes keeps saying that it cannot load data class information from sync services.It won't even allow me to do any updates
See TS2690: iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert.
tt2 -
iPhone not being recognized and cannot be activated for service--what does this mean? I can't sync with iTunes. Please help.
When I connect iPhone to USB iTunes is giving me the above message. Please advise if you know the fix.
Thanks,
Lina1116did you find a fix?
-
What do I do about this message? I've restored it 3 times, but this message still comes up, and i cannot put music on it now.
iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod.Sounds like your iPod is broken. Take it to Apple or someone else who repairs iPods and see if you can get it fixed, or get it replaced.
-
after itunes installation an error message is shown, (itunes could not connect to the iphone, because it is locked with a passcode, you must enter your passcode on your iphone before it can be used with itunes)
Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode -
Update ipad2 3G US Version from IOS 4.1.1 to IOS 6.0.1, ipad2 can't activate with itunes or wifi .
Dear ,
when I update ipad2 3G US Version from IOS 4.1.1 to IOS 6.0.1, ipad2 can't activate with itunes or wifi . A friend of me buy the ipad in USA and bring it to China.
ipad2 NO: DLXFJN74DFJ1. I'm live in China now .
How can i activate it ?
Thank you very much .Thank you!
So I buy AT&T , Sprint, Verzion SIM card from Taobao and try again.
Waitting for my good news .
Wish you have a good day . -
During recovery on iPhone 4 I got : The iPhone could not be restored. Un unknown error occurred ( 3004 ). Then - iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.Then I get error 3004 again. Latest iTunes and OS updates. I cant use the phone now. I did restart the destop,unplug the usb,...etc. Same iTune logo ,arrow and USB on the screen.THANK YOU SO MUCH,...!
Perhaps the information in this Apple support article will help:
http://support.apple.com/kb/TS3694#error3004
Regards.
Maybe you are looking for
-
Possible to find session/user who ran SQL in v$SQLAREA ?
Using this: select * from v$sqlarea where sql_text like '%2412982%' and sql_text like '%prms%' and module != 'sqlplusw.exe'; I am able to locate a particular instance of a piece of SQL being executed and stored in the library cache. However, I would
-
Video Display on Laptop goes haywire when you go to print a document
Hello and Help.. I have a brand new HP 14-r001TU Laptop It is running win 8.1 with all the updates it appears to work fine when browsing the web. My printer is a HP 2540 with the latest driver installed, test pages print perfectly. If I browse to a w
-
Acrobat links don't work on CD-ROM. Need help quickly...please??
This is my first project in Acrobat and it seems to be somewhat simple but this is my problem. I have pages that link to external files (.jpgs, .eps, quicktime movies). All of these links keep their "absolute" addresses when i copy the .pdf files to
-
How to add new package in SAP transport layer?
hello, as part of requirement, i have to add a new package to SAP transport layer. can anyone tell how it is done? as in STMs,add new package is not coming. Regards, Chaitanya
-
From RMAN - Not able to connect to the target database as sysdba
I wanted to configuring the backup server (rman catalog database server) to take RMAN backups of the varius target databases. while connecting to the target database from backup server, i am getting ORA-01031: insufficient privileges error. I created