Can't call to a network in uganda.

Can't call a new network Suretelcom Uganda limited (mobile +25674).

make a test and call +256742020802 and let me know if you can reach this network then i will buy credit, otherwise those who have credit can't call this network in uganda. please solve it.

Similar Messages

  • After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.

    After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ

    Izit software or hardware? Confuse:(
    Only can use wifi now.
    Any way thanks guys for ur suggestion:) amishcake and simes

  • Can't make or recieve calls (report a network conn...

    Hi All,
    I purchased the N9 64Gb some months ago - and updated it with the latest 1.3 release.
    After some usage - I started to notice that sometimes (once a day or once every second day) - the N9 ends up in some sort of mobile network deadlock.
    Error description: When in deadlock - when trying to make calls - phone reports network error. When trying to browse the internet - no connection. If i call to my N9 - from another phone, the call do not go through.
    Extra info: The N9 displays one bar of network connection, the icon for 3G is sometimes on.
    If im connected to WLAN - I can browse the internet, else not.
    If I reboot the N9, it will operate as normal again.
    There is no warning or indication shown before it goes into the deadlock - of not being connected to the mobile network.
    Idea's from an old member of the Low Level Yoda team in Copenhagen: The config flag that invoke a cell reconnect routine -  after the phone have been in a network situation of no 3G or 2G basestation connect options, could have been "forgotten" to be raised in one of the the states of the "going out of coverage of a basestation" routine.
    I hope that there is a solution - since the error leaves the end user (me) in an unfortunate situation of beliving to be online while its not the case. Its not acceptable at my workplace - that im often (randomly) not reachable by mobile phone.
    Best Regards
    Lars Nielsen 

    A) Which network operator do you use, in which country?
    B) Did you try the GSM-only mode?
    C) Did you try a new SIM?

  • Hi! I brought an iPhone 4 off my friend at work. The day I brought it, it was working fine but now I can't seem to send any messages or make phone calls. The network is showing up fine but each time I try to make a call it says "call failed" help any1?

    Hi! I brought an iPhone 4 off my friend at work. The day I brought it, it was working fine but now I can't seem to send any messages or make phone calls. The network is showing up fine but each time I try to make a call it says "call failed" I can't seem to send any messages either? I can use the Internet fine and everything else on the phone. Can anyone help?

    Hi chelsinator,
    You can reset the phone and it won't cause any problems or cause you to lose any data - Hold down the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears.
    The other thing you should do is to reset your network settings: Settings>General>Reset>Reset Network Settings. You will have to set up your Wifi again, but that oftentimes clears things up.
    Cheers,
    GB

  • Can I call any network's provider number in Cyprus...

    Can I call any network's provider number in Cyprus by buying Pay monthly package?! Like MTN, Cytamobile-Vodafone, PrimeTel, Mobee and etc. ?! And if I can is it the same rate for every network mentioned? 
    Thanks for your time
    Solved!
    Go to Solution.

    Hi,
    Yes, you should be able to call any landline or mobile number in Cyprus with the subscriptions that we have on our website.
    If you have a subscription, you will not be charged a per minute rate. The duration will simply be deducted from your available minutes.
    To check our available subscripitons to Cyprus, please visit this link: http://www.skype.com/en/rates/
    In the searchbox, type in the country of your choice and the list will be displayed. You may also find our per minute rates (distinct for landlines and mobiles) on the same page.
    Hope this helps.
    Did my reply answer your question? Mark it as a solution to help others, Thanks.

  • Form6i can't call another form on network mapping drive ?

    when on web,form6i can't call another form on network mapping drive on ias8 web server,but form 6.0 vs oas 4.0.7(or 4.0.8 )can,why?
    OS : windows nt 4.0 sp5

    Malay,
    In your application servers' oracle_home\forms90 there is a file named "formsweb.cfg" configure that file with all parameters and application path also.
    workingDirectory=C:\frms
    Regards
    Mayank sharma

  • I have a mid-2010 iMac and just purchased a 2TB TC, can't join existing wireless network with AC standard so attached to iMac via ethernet with TC wifi turned off.  How do i access TC now? not showing up in disk utility or on desktop. working fine with TM

    I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off.  How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM.  My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore.  Connected those drives to TM via firewire and could see the drives and access them.
    Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed.  I heard that bridging slows down everything and then there can be port issues with mail etc.  I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads.  Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system.  I really didn't want to monkey around too much with my system.  But are there other options to connect the new TC.  Can't find info anywhere for this and called apple who gave me the info above.  after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light  or repair it in disk utility if it should become corrupted.
    For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working.  Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
    Now a rant.  I can't believe in this wireless age that Apple would make a product that cant join a wireless net work.  The apple rep said i could return it and look for the previous TC that would join an existing wireless network.  Are we going backwards?
    Thanks!
    lennydas

    Ok... it is getting a bit clearer but there are still some questions.
    I connect to the internet via airport only and it is pretty fast.
    I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
    Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed.  I heard that bridging slows down everything and then there can be port issues with mail etc.
    I think this is mistaken.
    Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
    If the computer is close it will be faster than the FIOS.
    You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
    I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC.  the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
    Thanks again!
    You cannot extend to a non-apple wireless router.
    You cannot use join a wireless network because when you do the ethernet ports will be cut off.
    But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
    Join in the express is the only apple router that still allows an ethernet connection.
    For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options.

  • Can't call out on PSTN after ethernet adapter failure in J4W

    Hi all
    Okay here goes.
    We are currently deploying new laptops in our business. It's the brand new Lenovo X1 Carbon 2nd G. together with a USB based docking station. Unfortunately there is a very annoying bug with the docking station. The problem is that the dock ethernet NIC, suddenly disappears from time to time in Windows. This means that Jabber for Windows is failing over to the Wi-Fi network. This should be okay, but we are seeing an issue with J4W, when the ethernet NIC disappear.
    The problem is that J4W can't call out to external phone numbers/PSTN, but all internal calls are working fine. Also it's possible to call from an external number/PSTN to the J4W client. But still, the J4W client can't call an external no. You will only hear a busy tone when trying to make an external call.
    It doesn't help restarting the J4W client, we have to reboot the entire computer to make the client be able to call external numbers over Wi-Fi. Meaning that the ethernet NIC on the docking station, isn't reappearing after a reboot of the laptop. To make it reappear, we have to disconnect and connect the docking station cable.     
    Atm. we are waiting for a fix from Lenovo, but in the meantime I can't understand why we can't call external no. when the ethernet NIC fails. I mean, we can call external numbers. over Wi-Fi, but not when the ethernet NIC are failing.
    Can anyone point me into the correct direction here?
    Specs:
    CUCM: 8.6.2.22900-9
    CUP: 8.6.4.13900-4
    J4W: 9.7
    Gateway: Cisco 2911
    OS: Windows 7 32 bit.

    Hello Taxi-Anne, 
    Welcome to the forums. 
    Try following the steps below to turn off the call forwarding: 
    1. Touch Phone.
    2. Swipe down from the top of the screen.
    3. Touch the Settings icon.
    4. Touch Call Forwarding.
    5. Touch the required option (e.g., Forward If Busy).
    6. Touch Save.
    Let us know if this helps. Have a good day. 
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • How can I call a java class from within my program?

    I was wondering if there's a platform independent way to call a java class from my program.

    Here's my scenario. I'm working on a platform independent, feature rich, object-oriented command prompt program. The way I'm designing it is that users can drop classes they write into my bin directory and gain access to the class through my program. For example, they drop a class named Network.class in the bin directory. They would type Network network at my command prompt and gain access to all the methods available in that class. They can then type system.echo network.ipaddress() at my prompt and get the system's ip address. I have it designed that there's a server running in the background and the clients connect to my port. Once connected the end-user can enter their user name and password and gain access to the system. When they type a command they actually call another java program which connects to my server using a seperate thread. They can then communicate back and forth. I have it set that everything has a process id and it's used to keep track of who called what program. Once the program is done it disconnects and closes. Rather than getting into the nitty gritty (I didn't want to get into heavy detail, I know how everything will work) I'm really interested in finding out how I can call a java program from my program. I don't want it to be part of the app in any way.

  • How can i call a servlet from a servlet ?

    Hello,
    Can i call a Servlet from within a Servlet ?
    and is it "right thing" to Do ?
    Thanks

    JMO, but I wouldn't do it like this.
    Don't have a remote object like a servlet doing database queries for your app. That will mean TWO network hops for every query if the database resides on another machine. The network is the biggest bottleneck you've got.
    Write a JavaBean that does the database stuff for you and just have the first servlet instantiate it when it needs it. A Bean has a better chance of being reused, too. Write a TableGateway or DAO for your object.
    Or write an EJB to do it.
    The only time I've done a servlet-to-servlet connection like that was for one servlet running in a DMZ that would authenticate a user and then forward the request to another servlet running inside the second firewall.
    I wouldn't encapsulate database query logic in a servlet like that. JMO - MOD

  • How can i find out which network my iphone is locked to

    Sorry if iv posted this in the wrong section.well the question is quite simple. how can i find out which network my iphone 4s is locked to, without purchasing sim cards from every network.
    I just bought the phone second hand with no sim as a birthday present for my wife with the intention of getting it unlocked (not jailbroken)
    If any body can give me any advice it would be greatly appreciated.

    call Apple

  • Can't call mobile number

    hi, 
    I am trying to call my boyfriend. He has a dutch mobile number but is living in Anguilla. I would like to be able to call him using my skype credit, but everytime I try it just hangs up before ringing? Can anyone give me a reason as to why this is happening? 

    There seems to be a general issue with this network in Poland. http://community.skype.com/t5/Windows-desktop-client/Dzwonienie-na-telefony-kom%C3%B3rkowe-i-stacjonarne/m-p/4047271#M355735 http://community.skype.com/t5/Windows-desktop-client/Mobile-phone-calls-from-skype-quot-Sorry-You-can-not-call-this/m-p/4060561/highlight/true#M357913 http://community.skype.com/t5/Rates-and-subscriptions/Unable-to-call-mobile-phone-numbers-Play-mobile-network-Poland/m-p/4060492/highlight/true#M44126 http://community.skype.com/t5/Android/Sorry-you-cannot-call-this-number-Always-was-able-to-call-mom/m-p/4032839#M49717 http://community.skype.com/t5/Android/Skype-to-polish-mobile-quot-the-number-you-dialled-is-wrong-quot/m-p/3988973/highlight/true#M48837 

  • HT201412 My 4s is not picking up phone signal I do not no how to sort this out I have tried resetting it and its not working still I do receive messages and can send them but can not call as it just says call fail

    My 4s is not picking up phone signal I do not no how to sort this out I have tried resetting it and its not working still I do receive messages and can send them but can not call as it just says call fail

    Try resseting the network settings in settings>general then go to reset a the bottom.
    Then reset NETWORK settings.

  • HT4993 I'm trying to place a phone call and when I do the 3G icon goes away and the phone just says connecting but never does. I have almost full service and only have had my new iPhone 5 for two days. Can anyone help because I can't call Sprint at the mo

    I'm trying to place a phone call and when I do the 3G icon goes away and the phone just says connecting but never does. I have almost full service and only have had my new iPhone 5 for two days. Can anyone help because I can't call Sprint at the moment???

    Settings > General > Reset > Reset Network Settings

  • Recently a software update 7.1 presented itself on my phone. Since attempting to download it, I have lost the ability to search the internet while away from my computer. As well I can't call an one. And they can't call me. The 7.1 update keeps popping up.

    Since attempting to download the latest update of 7.1. the download confirmation showed a pop up saying; unable to install. Can't re attempt to install. Lost internet ability when away from computer and I can't be called, nor can I call anyone. Please, can anyone help me with this? I'll even go back to what I had, had before attempting the 7.1 download.

    Sounds like your only able to use Wifi on your device currently which indicates you have lost network connection with your cellular provider ....you can call them to troubleshoot this but one common issue in some countries is that if you are on a 3G only network this can become turned off after a software update...go to settings > cellular/mobile > and see if enable 3G  or enable 4G/LTE is off or on try turning it on and then power off phone and on again and this will probably fix it, so you can make calls etc and use the internet away from the computer.  As for the update always do an itunes backup first and they make sure you have long enough for this update to run through on wifi and then try it again.  Good Luck

Maybe you are looking for