Can't capture from my cannon video camera to Final Cut or iMovie.

Hi. I can't capture from my cannon video camera to FInal Cut or iMovie. ANy help would be greatly appreciated. I don't think my iMac is recognizing the camera. I was told I don't need a firewire, that USB would work if I'm just capturing. If I need a firewire what kind (the one I was sold didn't fit). I'm getting an "unable to locate external device message". Not sure of next steps to try. Thanks.
Computer= iMac 21.5-inch: 2.5GHz
            2.5GHzQuad-Core Intel Core i5
            1920 x 1080resolution
            4GB (two 2GB)memory
            500GB harddrive1
                        AMDRadeon HD 6750M with 512MB
Processorand Memory -
Powered by a quad-core Intel Core i5 or i7 processor and DDR3memory.
Connectionsand Expansion
SuperDrive, SDXC card slot, audio in, audio out, USB 2.0,FireWire 800, Thunderbolt, Gigabit Ethernet.
Video camera = Canon Vixia HV40
Standard Definition or High Definition
High Definition
Power Consumption
4.3 W
Television System
NTSC
Video Recording system
MPEG2
Image Sensor
1/2.7-inch CMOS, RGB Primary Color Filter
Total Pixels
Approx. 2.96 Megapixels
Effective Pixels
Tape: HD/DV (16:9) mode: Approx 2.07 Megapixels (1920x1080) DV (4:3) mode: Approx 1.55 Megapixels (1440 x 1080) Card: (16:9) mode: Approx. 2.07 Megapixels (1920 x 1080), (4:3) mode: Approx. 2.76 Megapixels (1440 x 1080)
Tape Format
HDV / DV
Maximum recording Time
SP: 80 minutes, HDV, DV LP: 120 minutes DV
Lens
Zoom Ratio 10x Optical / 200x Digital Focal Length f=6.1-61mm (35mm equivalent: 43.6 - 436mm) Zoom Speed Variable / 3 Fixed Zoom Speeds Max. F/Stop f/1.8-3.0mm (when tapes are used)
Focusing System
Instant AF, TTL (through the lens)
Manual Exposure
Yes
Programmed AE
Auto, Program, Av, Tv, CINE, Portrait, Sports, Night, Snow, Beach, Sunset, Spotlight, Fireworks
Max Shutter Speed
Movie: 1/2000, Still image: 1/500
Auto Date/Time
Yes
Record Search/Review
Yes
Focusing System
10 mm (wide) / 1m (tele)
White Balance
Auto, Daylight, Shade, Cloudy, Tungsten, Fluorescent, Fluorescent H, Manual
Frame Rate
60i, Native 24p Progressive (records at 24p), 24p Progressive (records at 60i), 30p Progressive (records at 60i)
Minimum Illumination
0.2 lx (Night Mode)
Image Stabilization
SuperRange Optical (lens shift)
Filter Diameter
43mm
Viewfinder
Widescreen 0.27-inch Color Viewfinder / (Approx. 123,000 dots)
LCD Screen
2.7-inch Widescreen LCD (Approx. 211,000 dots)
Recording Media
High Definition Mini DV (recommended) (63 min) or MiniDV cassette
USB Terminal
USB 2.0 Full Speed
Video Terminal
component (output), composite (output)
Audio
DV: 16 bit (2ch) 48 kHz 12 bit (4ch) 32 kHz 4ch synchronous recording not possible HDV: MPEG1 Audio Layer II (2 ch) (4-channel playback of tapes containing 4-channel recordings possible)
Accessory Shoe
Advanced
Supplied Video Editing Software
None
HDMI Terminal
HDMI Type A (19 pins) Connector (output)
Microphone Terminal
3.5 mm stereo mini-jack
AV Mini Terminal/Headphone Terminal
3.5 mm 4 pole mini-jack (video/audio input and output)
Dimensions
(W X H X D) 3.5 x 3.2 x 5.4 in. (88 x 82 x 138mm)
Weight (not including lens and battery pack)
1.2 lbs. (535g)
Weight
1.4 lbs. (615g)

Forget USB for capturing from tape. USB is only for stills from a Tape Based camera.
You require a firewire cable.
The camera connection end will be four pin and the Mac is nine pin to the 800 port.
Ask for a 9 to 4 pin firewire cable. Sounds like you have the wrong one as they can also be 4 to 4 or 4 to 6 pin!!
Also you will need the correct Easy Setup in FCE so FCE talk to the camera, exactly which one depends on what type of footage is being sent to FCE from the camera during capture.
Al

Similar Messages

Using a Flip video camera with Final Cut Express

I've just recently bought one of those flip video cameras (http://www.theflip.com) which is great, but I can't seem to get the footage imported into Final Cut Express without it then needing to be rendered when I place it on the timeline.
Does anyone have experience using this camera with FCE, and if so, which settings did you use please? I've tried tweaking most of them with little success.
Thanks!

Hi Simon,
in addition to Martin's instructions I suggest you to make sure, in MPEG Streamclip:
- you actually select Export to QuickTime (not Export to DV)
- you set the right frame rate (frequency), that is 29,97 for NTSC.
Personally I usually set Interlaced Scaling checked, and Deinterlace Video unchecked, but I'm not sure these are the right settings in your case.
With the above settings you should be able to import the resulting video into FCE without requiring any initial rendering, if the FCE Easy Setup is DV-NTSC.
Warning: I use MPEG Streamclip 1.8 (the latest as fa as I know) where the Frequency parameter is in the Export main window.
Piero
Message was edited by: PieroF

Getting the data code infomation from my sony fx1 camera into final cut pro

hi
any help/advice would be great.
i have shot some footage and am capturing it now,ideally i would like a time of day timecode
i dont think the f1 has a timecode on it ,but when i press the data code button it shows the time at recording ,which is perfect for what i need, but when i look at the clip in the browser there is nothing in the media start and end box's.
so my question is ,is there a way to have the data code information (ie time of day it is recorded) shown in fcp?
cheers all
simon

i know i have posted it......
but it has got me bothered as there must be a way to view the data code infomation in fcp and somehow see it in the media in and out like you do in time of day timecode i get from other cameras hoping some clever person will know what i can do or if its not possible at all even though the data code can be read by other mini dv cameras
thanks all for your reply's

How do i import movies from my iPad (movie cam) into final cut

I have imoported movies from the ipad into Iphoto. I couldn't get any videos to show up in the import browser from Ipad into Aperture. trying to import files directly from iphoto to final cut brings up an error message. exporting the videos from iphoto into another folder got them into final cut but the video doesnt play, the timeline just moves along a still image of the first frame of the video.

It's a bit confusing whether you are using iphoto or aperture as you mention both.
Are the movies still on your iPad? The best way to import would be to do it directly using FCPX. Attach the iPad, fire up FCPX, and import from camera (command-I). You should then see your clips that exist on the iPad and should be able to import them to an Event.

What is the best way to capture off of an AVCHD Camera in final cut?

Im kinda new to final cut pro so, please don't flame me. I was hoping to capture some extra footage on to my system through my AVCHD camcorder. And i want to know the best way to do so? Thanks for the answers.

I was not successful using mpegstreamclip for this. However, I found VoltaicHD from ShedWorx and it works great. Simply load all the clips you want to convert, assign a location and walk away. The result is beautiful HD .movs ready to be imported into FCP. I paid about $35 for it and it was well worth it.

Is it possible to remove phone ring from piano recital video clip in Final Cut Pro?

Hi.
I edit all videos in Final Cut Pro. My last video clip is a piano recital. And there is a phone rining during biutiful piano performance. Anybody knows how to remove it without removing this part of music?

Looks like you're using FCPX so this is the wrong forum, pop over to the FCPX forum and ask there, although I think the answer will be, always keep phones on silent at piano recitals.
DM

HT201109 video cameras for final cut pro x

which canon camcorders are compatible with FINALCUT PRO X

http://help.apple.com/finalcutpro/cameras/en/index.html
This will give you a list of tested cameras. There are probably many other models that have not been tested.

Best hd video camera for Final Cut Express HD?

About to purchase an HD camera for use with FCE HD ... any suggestions? Running a 2..6GHz Intel Core i& MacBook pro with 8GB RAM.

Hi
If You won on the lottery.
Google RED Cameras
astronomical costs - but that's what some pros use
nice to see then at least - no cost to view
Yours Bengt W

How can i download video hdv minicassette footage from my sony video camera with no fire wire port?

How can I download video HDV minicassette footage from my sony video camera with no fire wire port?

Hi,
Are you talking about your computer which has no firewire port ? If YES you can have one of two options:
(a) Use FCI - Firewire card like this (preferred)
You can buy from this:
http://www.ebay.com.au/itm/2-Ports-PCI-Express-PCI-E-IEEE-1394A-Firewire-Adapter-Cable-Card-/1507023...
(b) You can also use USB-Firewaire adapter like this:
http://compare.ebay.com.au/like/120580625092?ltyp=AllFixedPriceItemTypes
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Why can't I open DVD-RTAV files on iMovie from my HDD video camera?

Why can't I open DVD-RTAV files or RTR-EXTN on iMovie from my HDD video camera? I'm not sure which one has the video files anyway. Does anyone know how to import these to iMovie? Thx

rodhamilton wrote:
... I'm not sure which one has the video files anyway. ...
none.
tell us manufacturer and type/model of cam you're using ...

HT1338 why I can't do capture from the camera in final cut pro x?

why I can't do capture from the camera in final cut pro x?

why I can't do capture from the camera in final cut pro x?

HT2518 I am trying to move across & view my home movie clips from my PC to Mac, but I can't view them. What do I need to have installed on the MAC to view such files? (Originally put onto the MAC from a Canon video camera)

I am trying to move across & view my home movie clips from my old PC to my new Mac but I am unsure what software I need to view them. They are from a Canon video camera originally. Please advise how this is done!

Do they have a file extension?
How about anything on the camera which might indicate what it is, like AVCHD?

Can i capture from an analog 16x9 source

Can i capture from an analog 16x9 HD source (SAT-TV) using analog (S-Video) output using a Canopus ADVC-100 into FCP 4.x and preserve the anamorphic aspect ratio? If so, how do I go about doing this (meaning, if this will even work - I'm fairly certain that the SAT box will output the 16x9 flag on s-video - what settings do i use in FCP to capture that aspect?
Thanx in advance.

actually i am allowed to record from TV... i'm using the analog to do this. HRA allows me to do this - There are plenty of units out there that have tivo and a dvd burner that are legal) - all I'm doing is using my mac. Remember the VCR? this is no different as I am not going digital to digital or bypassing any DRM. Not to mention, I'm taping some docs that aren't even avaialble to purchase. ;(
Also, its just for my personal use. Just to have an archive of the show.
I'm using sledgehammer erquipment to just archive a show.. hehe

I have an iMovie that I created 10 years ago. I found the disk and imported. Everything is there except the sound! I converted in Wondershare to MPV4 but still no sound. There is an audio clip that was imported from an analog video camera.

I have an iMovie that I created 10 years ago. I found the disk and imported. Everything is there except the sound! I converted in Wondershare to MPV4 but still no sound. There is an audio clip that was imported from an analog video camera. Does anyone know how I can get the audio back?

Whitelab Records wrote:
So, 20 views and nobody's anybody the wiser?
A small update to this issue....
I have been trawling the forums to find an answer but to no avail...
And... I've tried exporting and bouncing individual stems and the full session, either by muting all bar the stem or soloing the stem.....and still nothing.
Same problems.....everything is audible in audition but nothing plays on playback.
Since the 'prelisten' channel strip is Solo safe this would indicate that you have a track or channel strip soloed somewhere else, out of sight. Are the Mute buttons on your channel strips blinking?
To view all objects in your mixer, click the button. You may have to scroll sideways to check the whole mixer.

Final Cut Express 4.0 | Cannot Capture from New Cannon Vixia HV40

My iMovie captures the footage fine. But the Final Cut Express doesn't see the camera at all - any ideas how i can actually use the Final Cut Express 4.0? Ive always been frustrated with it. even on my old camera there were Capture issues... so I gave up with it... I'm about to purchase either Final Cut Pro or Adobe Premier for my business and this is frustrating to the point where I'm leaning toward Adobe. I can't even get started! Haha
1. I opened the "Log and Capture" and there is no cameras showing.
2. My Camera is plugged in and turned on;
3. iMovie captures it fine;
4. I've read that the Cannon Vixia HV40 should show up on the desktop of my mac and it doesn't but iMovie sill recognizes it;
5. When I go into the Mac Preferences I can see the Cannon Vixia is connected by firewire

First trash your preferences. If you don't know how do a forum search.
How is the camera connected to the computer? Are there any other devices connected to the computer?
What settings are you using in FCE? Are you using the correct settings that match your media exactly?
1. Is the camera recognized when the application is launched?
2. Excellent. Is it in VCR mode, set to playback HDV and not downconvert?
3. That's terrific. Then you can use that media in FCE. Or you can learn how to do it in FCE.
4. Where did you read that? It's complete garbage. The Vixia HV40 is a tape based camera. They don't mount on the desktop.
5. You mean System Profiler? Or something else?

Can't capture from my cannon video camera to Final Cut or iMovie.

Similar Messages

Maybe you are looking for