Can't Capture More than 5 Mins

Hi i have a canon hv20 and i am capturing my video in final cut expresse version 4 it only captures 5 mins then it stops and the comouter freezes. I have a mac mini OS version 10.57 itel core 2 duo 2 Gb of ram. The tape i am capturing is about an hour.
Anyone expreianced this before please help me.
Thanks

Hey tanks a lot men now i can capture but i have less space to put all of the videos so i have to stop and dump it in to hard drive then start capturing again.
Thank you very much

Similar Messages

Why can't I capture more than 6 min of 1 step IDVD?

My first capture was almost the whole tape, but now I can only capture 6 min plus at a time. I have deleted all of my other films etc, and emptied the trash, and still no luck?

Here's what iDVD Help says about OneStep:
Burning a OneStep DVD directly from a DV camcorder
You can skip the creative process completely and burn video footage or a movie directly from your DV camcorder to a DVD disc. When you insert the burned disc into a DVD player or a computer, the contents play automatically.
Autoplay DVDs are sometimes said to play in "kiosk mode" and are a good way to create demos or other presentations that play automatically and require no user interaction.
To burn a OneStep DVD:
Insert the DV tape with your movie or footage into your camcorder.
Connect the camcorder to your computer using a FireWire cable.
If your camcorder uses a dock, put the camcorder in the dock and connect the dock to your computer. See your camcorder's instructions if you're not sure how to do this.
Switch your camcorder to VTR, VCR, or Play mode. If necessary, turn your camcorder on.
Open iDVD and click OneStep DVD. Or choose File > OneStep DVD.
Insert a blank DVD disc into the optical drive when you are prompted to do so.
The tape in the camcorder rewinds automatically to the beginning. If you already set up the tape to start where you want, press the Play button on your camcorder as soon as it starts to rewind. This stops the rewind process and the next stage, video capture, begins.
A progress dialog keeps you informed about everything that's being done. You can stop the process at any point before the burning stage to leave the DVD disc untouched.
Creating a OneStep DVD will take longer than simply burning an iDVD project to a disc because the video needs to be captured first. Plan on your computer being tied up for a period of time. You may want to do this when you don't have work to do on your computer for several hours, perhaps before bed or before you leave for work, depending on the amount of video on your tape.

Unable to Capture more than 5 mins, error out of mem msg when rendering

Somebody help me. I have been using my powermac fcp and a mini dv cam for 4yrs no problems. Now when i am trying to capture clips over 5 mins (1 gig) fcp freezes. So Im capturing through Imovie (which is working fine). Dragging clips into fcp to edit. Now when it comes to rendering anything over 5 mins Im getting an error out of memory msg.
Can anyone help me?

You don't say what version of FCP you are using but my guess is you've upgraded QT7 and are running FCP4.5
If that's the case, do a search here for the solution(s). They're ugly.
good luck,
x

Won't capture more than 5 min

I can't capture video for longer then 5 minutes with out FCE HD freezing on me. My tape keeps rolling but the capture stops. When I try to stop it I get the swirling ball that doesn't stop & I eventually have to force quit. Also it will say a 5-10 min. clip is taking around 40 GB. Something weird is happening. I haven't ever had problems until the last few months.

Hi everybody.
I had this same problem. It ended up being the QuickTime 7.3 undate that caused the problem for me. Check out this thread:
http://discussions.apple.com/thread.jspa?threadID=1243747&tstart=0
There are a lot of good suggestions in there to try to correct your problem.
As a last resort, I ended up using "archive and install" to correct my issue. It has been working great ever since.
Brian

Can't Capture more than 10 minutes or so before the window freezes

Using Final Cut Express 2
Camera feeding is a Hi-8 Sony DCR-TRV120 NTSC (non Hi Def)
Troubles started (I think) after I upgraded my OS System to 10.5.6
I hadn't used this program in a while.
Things seem to go as they used to when I was capturing video, but after 10 minutes or so (this part is not consistant), the capture window freezes with no message while the source video on the camera plays on.
I have tried changing my cable
I have tried using a different camera, my friend's Hi-8 Sony DCR-TRV140 NTSC (basically a better version of my camera)
I tried trashing the entire program and all related files and doing a complete re-install, but this didn't solve the problem.
Any advice?

Are you by any chance using an external Hard Drive that is not formatted with Mac OS Extended ?
With regard to re-installing etc. have you checked out this article:-
http://support.apple.com/kb/TA24195?viewlocale=enUS&locale=enUS
Message was edited by: Ian R. Brown

If my Mini is running 64 bit can I run more than 4Gb RAM?

I hear ALL over the place that the mini can not use more than 4Gb RAM.
Is this a hardware limitaion of the motherboard/Processor?
OR
Is this due to the fact that mini's run at 32 bit?
You can now easily run modern mini's at 64 bit:
http://blog.leanopen.nl/2010/04/23/doesnt-your-mac-mini-want-to-boot-in-64-bit/
So who knows the REAL answer?
Thanks -
skibum

Most of the Minis are limited to less than 4GB and that is a hardware limitation. The newest Mini with the nVidia video can access more. Apple only supports 4GB because they use matched DIMMs, which on paper have a slight performance improvement over unmatched DIMMs. For whatever reason, Apple doesn't yet support 4GB DIMMs in the Mini. (I suspect that the power requirements or prices for the larger DIMMS may have affected Apple's decision.)
If you do have an appropriate Mini, then you can get compatible 4GB DIMMs from [Macsales|http://eshop.macsales.com/shop/mac-mini> or others. Regardless, although I normally trust Macsales, more than 4GB is not supported by Apple, so you have to take that in to consideration. (i.e.: warranty from Apple or Applecare.)

Can I create more than one bookmarks toolbar?

I'd like to set up several toolbars -- one for myself & my favorite sites .. one for my kids for their school needs ... and one for my husband. Can this be done? Will all three show up at the top?

pajagsfan wrote:
Can I create more than one library on the same computer? Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her. When I deleted my albums from her library the disappeared from mine. (I think?)
I know it's Valentine's Day, but before you get your wife fixed up the first thing you need to do is recover the deleted albums for your own library. See if the files are elsewhere on your hard drive, or in the Recycle Bin. When you find them, get them back into your own library. Now you are ready to help your wife.
As noted above, you can have two libraries in one Windows user account via the Shift-Start approach, but if you both use your libraries regularly, that becomes annoying quickly. It is better to set her up with her own Windows user account. She can have her own iTunes library there.
Get a copy of your entire iTunes folder to start her off. She can delete stuff she doesn't want without messing you up.

Can i create more than one library on the same computer?

Can I create more than one library on the same computer? Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her. When I deleted my albums from her library the disappeared from mine. (I think?)

pajagsfan wrote:
Can I create more than one library on the same computer? Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her. When I deleted my albums from her library the disappeared from mine. (I think?)
I know it's Valentine's Day, but before you get your wife fixed up the first thing you need to do is recover the deleted albums for your own library. See if the files are elsewhere on your hard drive, or in the Recycle Bin. When you find them, get them back into your own library. Now you are ready to help your wife.
As noted above, you can have two libraries in one Windows user account via the Shift-Start approach, but if you both use your libraries regularly, that becomes annoying quickly. It is better to set her up with her own Windows user account. She can have her own iTunes library there.
Get a copy of your entire iTunes folder to start her off. She can delete stuff she doesn't want without messing you up.

I am running a strain gage test and can't get more than 1000 samples

A formor employee left a strain gage VI that I am attempting to reuse but no matter what I do I can,t get more than 1000 samples before needing to restart the loop. In the task timing (of NI-DAQmx) I have set the acquisition mode to N Samples and the clock settings to read 65000 samples at 25 Hz. There is a DAQmx timing(sample clock) VI that resets to finite samples and 1000 per channel when I close it but I have reset it to 65500 continious samples and left it open to no avail. There is a rate input to this sample clock on the front window that I have tried setting to several different rates to no avail. The Vi will run about 15 seconds, collect 1000 samples and then ask to verify the file location to save the data to. Upon verifying the file location the VI will run another 15 sec. loop before stopping for verification again.
If the loop is stopped rather thanhaving the file verified an error is listed:
Error-200278 occurred at DAQmx Read (Analog 1d WFm NChan NSamp).vi:1
The given possible reason given is: attempted to read a sample beyond the final sample acquired.
When I stop attempting to run the VI the block diagram opens with a dark block around file creation block. I need this VI to run for 10 min. collecting samples at about 25/sec. Can someone help me figure out what I am doing wrong?
I have made screen shots of the VI and the error code to assist finding the incorrect programing.
Thank you for your help.
Jim Steinmeyer
Jim Steinmeyer
Design Engineer
Reinke Mfg.
PO 566
Deshler NE 68340
[email protected]
Attachments:
strain test error.doc ‏493 KB

Thank you,
I was just thinking about being able to increse the size of the doc. for better visability. I have tried working with the rate input for the DaQmx for the sample clock and it does change the frequency of sampling, but I still get just the 1000 samples. I have included Jpegs this time. I have tried to exppand the two DAQ assistants that arn't expanded but am unable to, I also am unable to find a "propertys" command to open them up and see what exactly they do. The nested while loop for output also seems strange to me. Maybe I would be better to attempt a new program but being new to the language I thought using an existing program might be best.
Jim
Jim Steinmeyer
Design Engineer
Reinke Mfg.
PO 566
Deshler NE 68340
[email protected]
Attachments:
block diagram.JPG ‏134 KB
DAQmx.JPG ‏129 KB

HT5019 MacPro laptop display and 2 external monitors (three displays). Can I have more than one application displayed at a time?

I would like to have my MacPro laptop display and 2 external monitors (three displays). Question, how can I have more than one application displayed at a time? IE: I would like email on one monitor, Finder on my laptop, and iTunes on the other. Possible?
With extended desktop, it appears that I can only have one application presenting at a time. Sort of defeats the purpose of having multiple displays.
I am using the HDMI and the mini HDMI connectors.

I would like to have my MacPro laptop display and 2 external monitors (three displays). Question, how can I have more than one application displayed at a time? IE: I would like email on one monitor, Finder on my laptop, and iTunes on the other. Possible?
With extended desktop, it appears that I can only have one application presenting at a time. Sort of defeats the purpose of having multiple displays.
I am using the HDMI and the mini HDMI connectors.

Can I install more than one PCI1409 in a PC

I have to capture two RGB sources for identical treatment. Can I install more than on PCI1409 in one PC ? Is there a limitation of the number of cards ?

You can install multiple cards in a single computer. The main limitation is bandwidth of the PCI bus. I am not sure exactly what that limit is, but I don't think you would have any problem acquiring two RGB signals at normal rates.
If you have to process the images as you acquire them, you could run out of processing power, though.
Bruce
Bruce Ammons
Ammons Engineering

I have been using USB 2.1 10/100M ethernet adaptor. But it takes more than 15 mins to detect network interface. What should I do. I am not using apple's company adaptor. It's local company.

I have been using USB 2.1 10/100M ethernet adaptor. But it takes more than 15 mins to detect network interface. What should I do. I am not using apple's company adaptor. It's local company.

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

Can't load more than 2gig on 40 gig iPod. Inexplicably skips too.

I have a 40 gig click wheel iPod that I purchased new 1 1/2 years ago. I've been having 2 problems lately.
One, I can't put more than 2 gigs of music on it. When in iTunes, at about the 2.1 gig point, when I try to load anymore music the iPod will lock up. The only thing I can do is restore it and settle for only using 2 gig worth of the hard drive.
Two, the iPod will skip. Certain songs will skip every time I try to play them, others only sometimes.
I have already tried restoring it and the software is up to date.
If anyone has the solution I'd apreciate a response.
Thanks,
Christian

Sounds about like the same problem I am having. Mine locks up a lot when I try and upload songs to my ipod. Also I can't transfer files to my iPod sometimes, and when I can they are under a gig. Otherwise it locks up and I can't do anything with it. Some songs randomly skip and some lock the IpoD.
Help please. I have tried restoring and what not 500 times.

Taking more than 2 min T-SQL

Hi Friends,
SELECT
DATEPART(YEAR, SaleDate) AS [PrevYear],
DATENAME(MONTH, SaleDate) AS [PrevMonth],
SaleDate as SaleDate,
Sum(Amount) as PrevAmount
FROM TableA A
WHERE SaleDate >= DATEADD(yy, DATEDIFF(yy, 0, GETDATE()) - 1, 0)
AND SaleDate <= DATEADD(dd, -1, DATEADD(yy, DATEDIFF(yy, 0, GETDATE()), 0))
-----'2013-12-31 00:00:00.000'
GROUP BY
SaleDate
This Query taking more than 2 min to pull the results .... basically I was passing last year first date and last date (should derive based on getdate())
if I pass static values like this WHERE SaleDate >= ''2013-01-01 00:00:00.000''
AND SaleDate <= '2013-12-31 00:00:00.000'
then it is pulling results in fraction of seconds.....
Note: I was keeping this code in View I have to use only View ( I know we can write store procedure for this but I dont want sp I need only View)
any idea please how to improve my view performance?
Thanks,
RK

Do you have an index on SaleDate column ? If so , is this NCI or CI? How much data does it return? Can you show an execution plan of the query?
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

While using Status for Object button it is taking more than 15 mins to open

Hi Gurus,
We are trying to attach documents to ZBOS & OR types sales documents , while opening the Status for Object button of the sales order it is taking more than 15 mins to open , once it is opened it is working as normal.
can you please let us know is it the system functionality because of which it is taking so much time to open or the problem is with something else.
please let us also know whether it is system impacting process.
We are using 4.6C.
Thank You,
Boyeni.

Hi Syed ,
Greetings!!!...
Thank you very much for your Swift response!.
could you be so kind to let me know The Program that needs to be refreshed.
Thank You once again for your Assistance.
Boyeni.

Can't Capture More than 5 Mins

Similar Messages

Maybe you are looking for