Can't Capture Selection for Noise Print?

Hello All... I'm new to Soundbooth and have been trying to reduce hiss in my audio. I've read up and watched tutorials on capturing the noise print etc... I drag to select part of the audio and click on "Capture Noise Print" and it seems to do this.
The problem begins when I click on "Reduce Noise"...for some reason the whole clip is selected (turns white) and when I click on "Preview" the clip begins playing from the beginning rather than playing the Noise Print Selection. (despite having "Use Captured Noise Print" checked in the box)
Also... I noticed when I go to "Undo" it says "Undo Clear Fade Out" I'm not sure why...
Any suggestions on what I'm missing or doing incorrectly?

OK, it's Wednesday and I am getting a little less forgiving, so sorry, but...
Do a search of this forum for FCP 4.5 and Quicktime x.x.x (insert your version of QT here) and you will realize that you have upgraded QT beyond the capabilities of 4.5.
Solutions:
1. Revert to QT 7.1.6
2. Uprgrade FCP
Wow, I was more forgiving than I thought.
Good luck.
K

Similar Messages

Wireless Connectivity can't be maintained for HP2540 Printer

Printer worked fine using my own home router for 2 years. HP2540 printer - firmware rev CP1FN1333AR. Win 8.1 OS Recently switched to service where ISP provides router and printer will not maintain connectivity beyond a single print job. Have 1) reset printer and router via power downs - several times 2) confirmed latest HP printer updates are on printer, 3) run HP Scan Doctor s/w and connected via USB cable to load new network settings 4) 'uninstalled' and resinstalled printer on PC and network 5) successfully printed HP Network Config Page following a wireless install. Connectivity then drops and Scan Doctor indicates 'no connnected printer' and refers back to USB and wireless install routines, neither of which has fixed problem. All net settings (IP Addresses for printer, gateway etc look OK, SSID matches net name, sig strength is good, channel 11 assigned. Bottom of Gen'l Information section of HP Net Config page indicates Internet 'Not Connected' and has a warning 'Web Services require the printer to have a connection with Internet connectivity'. I'm only trying to print local PC generated docs however. Have gone through most of the HP section at URL - http://support.hp.com/us-en/document/c02790693 for this printer, much of which is noted above. Any suggestions?

Thanks for your suggestion - I had not changed channels as HP Net config printout had indicated signal quality as '5' on a scale of 1-5. Ran a built-in Wi-Fi modem test which indicated Channel 11 (the one in use) rated 88 (100 max) on the self test, but best channel was 2 (at 94 rating). Changed to Channel 2 and dedicated an IP address (virtually the only other step I had not completed in the HP procedure) while I was in the router config section. Turned off printer and when it indicated a wireless channel had been acquired, ran HP Scan Doctor again, and rec'd 'no connected printer' msg yet again. Ran the 'advanced' Scan Doctor retry option at that point and rec'd diagostic response that 'One Note' was my selected default printer (which did not square with Control Panel indication that my HP2540 was the default. Scan Doctor offered to enable my HP2540 as the default printer and things now appaer to be working. Not sure just which of these items fixed my problem, but you deserve the credit for identifying something that I had not considered, and thus leading to the solution (either directly or indirectly). My thanks for your assistance and I will provide 'thumbs up' and 'solved' status to your post.

Officejet Pro 8000 slow to select for color prints

I just installed Officejet Pro 8000 and immediately noticed how slowly the printer is selected in printer options box when I am doing color printing. It takes about 30 sec-1 minute to finalize the selection of this as my printer for the job. I have a networked color laser jet and a networked b&w laser jet also installed that are immediately selected when I choose them from the list.
I have been testing this in Word 2007 and have noticed that when I select the officejet, the bar at the bottom of the word screen says "connecting to printer" - this seems to be the source of the slowness. I have the latest driver installed and I do not have this problem when printing regular b&w docs on this printer.
Is there a problem here or is this normal <SLOW> color print operation?
Thanks!

Thanks for the advice to contact HP tech support!
I have tried in multiple ways since November 2009 to contact HP, when I got the first (of 4) printers. The first 3 printers was subsequently replaced.
Finally in late June 2010 I got the message that there was coming an firmware update for Windows, but not for Mac's. The firmware should improve among other things the paper pick up (load paper issue) and the print-heads life.
I have applied the Windows firmware on the printer from a pc, but still seems to have load-paper issues, even using HP Bright White paper, when printing from Mac's. I have not tested the printing from a pc, but assumes that a firmware upgrade the printer, and are not specific to a certain OS.

Strange ATV2 behaviour - Movies can't be selected for downloaded & most menu items not selectable??

ATV2 fully online, previews movies, downloads YouTube, Homesharing all good (and a seasoned ATV owner and user)
However download movies is not working, and no error message just a "beep" sound when you select "rent movie".
Also many of the menu items cannot be selected. You cannot down select most of the items under General, so it's impossible to change settings, or to do any troubleshooting. You get the same "beep" sound when you select Name, Network, iTunes Store, Reset, etc.
I have done the usual power down, plus reset using remote, but the system doesn't seem to go back to factory default. I haven't tried the mini-USB connection to MAC as I don't have a cable but hoping someone can help?

<Button guid="guidCBExtensionPkgCmdSet" id="cmdIdCBAutoSave" priority="0x0100" type="Button">
<Parent guid="guidCBExtensionPkgCmdSet" id="CBAutoSaveGroup" />
<Icon guid="guidImages" id="bmpDisk" />
<CommandFlag>TextChanges</CommandFlag>

<Strings>
<ButtonText>Enable Document AutoSave</ButtonText>
</Strings>
</Button>
private void OnBeforeQueryStatus(object sender, EventArgs e)
DbgMessage("OnBeforeQueryStatus");
var myCommand = sender as OleMenuCommand;
if (null != myCommand)
switch (myCommand.CommandID.ID)
case (int)PkgCmdIdList.CmdIdCBAutoSave:
myCommand.Enabled = true;
myCommand.Text = _autosaveEnabled ? "Disable Document AutoSave" : "Enable Document AutoSave";
break;
case (int)PkgCmdIdList.CmdIdCBAutoSaveProject:
myCommand.Text = _autosaveProjectEnabled ? "Disable AutoSaveProject" : "Enable AutoSaveProject";
myCommand.Enabled = _autosaveEnabled;
break;
default:
break;
DbgMessage(string.Format("Id: {0} Text: {1}", myCommand.CommandID.ID, myCommand.Text));
Very puzzling that I have only seen the bad behavior on Win8.1, and not when debugging the extension. (Haven't been able to try the extension on Win8, but have tried it on several Win7 computers, and one WinServer 2012 R2 computer.)
Is there someplace to look for runtime exceptions? I haven't seen any in the Output window when the bad behavior occurs....
(If you want to try the extension, you can add a gallery and point it to www.cbates.net/VSIX/atom.xml.)

Where can I find instructions for the "print edit" add on (after download & installation) ?

I've downloaded & installed the "print edit" add-on successfully, now I need instructions on how to use it. Is there a type of manual or other support option for this?

A good place to start is the extension's page on the Add-ons site:
https://addons.mozilla.org/en-us/firefox/addon/print-edit/
Unlike many others, the author has posted pretty detailed instructions and lots of screen shots. This isn't the best format for absorbing the information because the text and images aren't integrated, but hopefully with a little flipping back and forth you can get a solid start.

Can't Convert Selection For iPod.

When I attempt to put a quiktime video on my video iPod, it says that my iPod is unable to play that file type.
Then, when I try to convert that video for use on my iPod, it says it can't due to an unknown error (-3000) occurring.
Some help with this would be VERY much appreciated, as it is driving me insane.

I don't know how to solve your problem directly, as in within iTunes, but a workaround is to simply use other software to convert your videos.
I personally use iSquint, as its fast, free, easy to use, and works every time. After a file is converted, simply drag the outputted file into iTunes or your iPod as normal.
http://www.isquint.org/
(The makers of iSquint now offer a more feature-rich version called VisualHub, which is not free and I cannot vouch for.)

NO FIREWIRE! MacBook can not capture video for editing...Help!

I bought a New Unibody Macbook last week. Then I realized that my New Video Camera (Canon Vixia HV30) is not compatible with the MacBook as it has no Firewire. So I called apple to discuss returning it for a Macbook Pro. But upon examining the specs for the MacbookPro I discovered that it only has Firewire 800 which is not cross compatible with Firewire 400. So that computer will ot help me either. Apparently the manufactures of video cameras are way behind Apple in its adoption of firewire 800. (note USB2.0 is not designed for video, it is a burst based protocol and not nearly as fast for continuous data streams, like digitizing video)
Does anyone know of...
1) A Video Camera that uses Firewire 800
2) An adapter from 400 to 800?
Any help would be very appreciated.

I have been pretty ticked off about Apple's direction myself as I own an audio and video business which relies heavily on FW400 for my cameras and sound cards. I am fortunate to have the older 17" MacBook Pro with both Firewire's built in, but I was thinking to myself, what would I do if I had to purchase now. This is what I would do:
I would get a MacBook Pro and purchase at $32.00 Fire Wire ExpressCard/34. Gives you 2-Firewire 400's. Heck for $30.00 you get two ports. Not bad at all!

Can't find options for printing without color!?

Any ideas for finding options for black and white printing on an iMac 10.7? I don't want to waste the color cartridge.

I've been working on Macs since OS6. Just moved all the way from Tiger to Lion. Seamless aparrt from printing Black and White. I have a few thousand CAD files which I print regularly. They're drawn in various colours on a black screen but obviously when I print them I want them in Black & White. Not Greyscale.
Previously I've hacked around this using a custom Quartz filter which I can no longer select from the Print dialog. Save in Preview, apply a filter, reopen and print? A few hundred times? Not very helpful.
I tried setting up an Automator print workflow but it baulks at the printer by sending a Letter format file not the A3 or A4 that's in the original Print Setup dialog.
Oh - the printer is a Xerox Workcentre 7425.

How can I reduce the selection for the characteristics value in a BW query

Good morning,
I need to find out how I can reduce the selection for the characteristics values in a BW query.
In a BW query I have a characteristic "Due month".
The characteristic values shown in the query are from 01.2001->03.2007. I would like to reduce it to the last 2 years,in the query view, without deleting the data for the other years in the cube.
Do you know how this can be done?
Thank you in advance for your feedback.
Kind regards,
Linda Verding
Staff Consultant - CSC

hi,
First thing you have to do is check the report how the data is being restricted only to those months.
1) one it can be variable in which the code is written for that to populate for last few years.
or else it must have been hardcoded for these months.
Go into your report and underneath the characteristicsCALMONTH there must be an variable or hardcoding.
You need to change this here in the report.
You dont have to delete anything there.
Regards, Siva

Applying Noise Print and Noise Reduction to Entire Sound File

It has been a while since I've opened Soundtrack Pro so I can't quite recall a final step in a noise reduction process I'm attempting:
1. I selected a portion of the track I'm working on that has just the tape hiss I'm trying to reduce.
2. then I selected "Set Noise Print",
3. then "Reduce Noise"
Question: how do I now apply the Reduce Noise setting to the entire track and not just on the portion of the track I sampled for the the Noise Print? I can't remember what the next step is. What am I forgetting here? Thanks.

It was so obvious that I figured it out immediately after the post.
After "Set Noise Print" I reselected the entire track and THEN applied "Reduce Noise".
Maybe getting a full night's sleep sometime would help me figure this sort of thing more quickly on my own.
Bye

SPAD: Device type to be selected for 'HP Laser Jet P2055dn'

Hi,
Recently we were asked to configure 'HP Laser Jet P2055dn' as the cheque printer in our landscpe.
While configuring the printer, I have a doubt of the Device Type to be selected in SPAD settings.
Could you please suggest me which Device Type to be selected for this printer
Below are the details of the Printer provided o me by the infrastructure team:
HP Universal Printing PCL 5: 'HP Laser Jet P2055dn' with a Troy badge on it
Regards,
Manish Sharma

Hello,
Try using HP Laserjet 4 series PCL-5 driver for the printer you have mentioned.
Otherwise you can customize your own drivers with needed controls, formats, etc macthing the cheque printing.
Regards,
Yoganand.V

Oracle Apps 11i - Pasta Setup for Barcode print in rdf file

Hi All,
Since last some days i am trying to setup Oracle Apps 11i to print barcode reports (RDF files) from concurrent manager.
If anybody have any idea about how to configure pasta to print post script files which support barcode, please suggest.
I have already read many documents but not able to do that. In one of pasta document i found that, pasta support two type of TrueType font. One can be used for regular text and second can be used (bold) for barcode printing. But it shows barcode font as a regular font.
-Thanks.
Arun.

Please refer following notes:
Dynamically Switching Printer Trays [ID 66402.1]
How to Specify a Printer Paper Tray With Pasta [ID 241086.1]
thanks

Creating InDesign files for both print and mobile output?

I am looking for a way to create files that can be multi-purpose for both print and mobile/online environments. I would like the output to be 2 different PDFs from one set of Indesign files. The problem I am encountering is that currently my files are full of hi-res and vector graphics, effects, and are generally created to be optimized for large-scale printings on offset or digital presses. I am trying to use the same files to generate files that are optimized for mobile and online presentation but finding that the number of vector graphics specifically is slowing page display down.
My initial reaction is that the solution would have to be dual-development. Multiple forms of 'master graphics' would have to be created and placed on multiple layers (one for print and one for mobile/online).
Hi-res files could be made lo-res in Acrobat or Pitstop, but vector imagery would have to be rasterized and I am not aware of a method to do that in either of those programs.
I have found some info on adobe.com leading me to think that maybe CS6 addresses some of this, but the majority of my work is being done in CS4 with only the bleeding edge being done in CS5.
Thanks in advance for any insight.

the output to be 2 different PDFs from one set of Indesign files.
You can accomplish this by saving each PDF using a different preset - High Quality Print for the high res, smallest file size for web
but vector imagery would have to be rasterized...
You should be trying to keep all vector work as vectors. This, in most cases, lowers the file size. There are a couple of exceptions to that like if the vectors are very complex (layered etc) and you are using bitmap effects like drop shadows. In general, rasterizing will increase the file size and lower the quality.
Is there any functional difference between the 2 PDFs? I am wondering why exporting using 2 different presets will not do the job efficiently enough. You could always save your linked images with a low res version - same file but make a copy 100dpi instead of 300dpi. This might help but InD normally downsamples the images anyway when exporting as smallest file size.
EDIT:// In Acrobat, you can save as "Reduced Size PDF" which strips out all the meta data etc and makes the PDF lighter and faster for web use. This would be a final, before publishing online step.

Cant use constant selection for ONE restriction in selection

Hi, all
BW70 SP8, BI Addon SP8 Rev 802. I cant use constant selection for ONE restriction in selection, i can set constant selection only for whole selection, but it fix value for all query. I need to fix only one character value.
Is there a way of doing this?

Global restricted key figure doesn't allow to restrict one char too. There is no constant selection checkbox in restricting char context menu.
I use multiprov. Prov1 consists of Char1, Char2 and KF1. Prov2 consists of Char1, Char2, and KF2.
I want to restrict Prov2.Char2 to # for KF2, and not restrict Char1, but! I can set constant selection for only whole selection(KF2 and Char2=#). So it has same value for all Char1 values. I need to constant selection only for char2.

Building multi selection for input schedule

Hi Guru,
I woul like to build a query based on different selection for each colunm , could advice me how to build this input schedule.
   the structure should be like this :
     Drop down list for each field selection , the user can do different selection for each column .
     Field selection 1     Field selection 1     Field selection 1     Field selection 1
     Field selection 2     Field selection 2     Field selection 2     Field selection 2
     Field selection 3     Field selection 3     Field selection 3     Field selection 3
     Field selection 4     Field selection 4     Field selection 4     Field selection 4
     Field selection 5     Field selection 5     Field selection 5     Field selection 5
     Field selection 6     Field selection 6     Field selection 6     Field selection 6
     Field selection 7     Field selection 7     Field selection 7     Field selection 7
     Field selection 8     Field selection 8     Field selection 8     Field selection 8
Key figure 1     1$                          2$                              1$                                                    2$
Key figure 2     1$                          2$                              1$                                                    2$
Key figure 3     1$                          2$                              1$                                                    2$
Key figure 4     1$                          2$                              1$                                                    2$
Key figure 5     1$                          2$                              1$                                                    2$
Key figure 6     1$                          2$                              1$                                                    2$
Key figure 7     1$                          2$                              1$                                                    2$
Regards

Hi,
I dont think this can be done.
In the columns, you can use EVMBR function. The user can select the member. Accordingly, the data cell should fetch the value using EVGTS. However, you need to make sure that your column represents only one dimension. So, you need to use the other dimensions judisiously in the EVGTS function.
The problem comes now. You cant override the data cell with some other value, because that cell has a formula. If you write some value in that cell, the EVGTS function gets overwritten. And if you cant write value in the cell, then what will you send.
Hope you got my idea.

Can't Capture Selection for Noise Print?

Similar Messages

Maybe you are looking for