Can't capture video with FCP 5.1

Hi All,
Here is the case. I'm trying to capture the video from my newly baught Sony HDR FX7. Here are the specs:
I've connected it thru Firewire 400 on the back of my G5.
G5 660GB HD, 5.5Gb RAM
In Easy set up I've selected HDV-1080i60
When I go to file-log and capture, it connects to camcorder and says VTR OK on the bottom of the screen.
When capturing the video (after I've connected to log and capture I push play on camcorder and then click capture now on FCP) I could see on the capture screen and my video running but here an there a green line would cross the film and then it would slow down for a 10th of a second and line would run accouss the capture window again. The type of lines you'd get in the old movie? .
After I've captured all 5 sigments I had on the tape and when I tried to play (I went to file-import-file, I've selected the captured clip from my internal HD where the FCP put the files). The file opened in browser. And then it open in preview window of FCP. At this point the clip that is 1 minute long would play for 2-4 second and end there. The quality of it was also very, very poor (and I filed it at HD 1080i.
So, the quality was really poor. It was the case with all 5 clips I've captured from FX7. All of them 2-4 sec. long and very poor quality.
Now, if I try to play the clip from camcorder and select "in" and "out" points and then batch capture via the same log and capture window, it would tell me that it's "unable to locate timecode, the timecode appears to be missing from the tape. Please verify that tape is timecoded correctly"
So, I was reading this forum and did this:
Tried to go to user preferences and set "on time code brake" select "make new clip"
Nothing helped.
Also it's worth noting. When I push play on camcorder and click capture now, new window comes up and it says on the bottom of it "searching for meadia..." press esc to stop or something like that. May be it's not finding it?
Also, when I first filmed with this camera, I would stop after every clip, turn off the camera, plug it into tv and preview what I've filmed.
Either way, the few seconds of the clips that I"ve got are very bad quality. When I view the clips on my TV and monitore connected thru 3 colored cables, the video was ok, I'd even say good, just too much noice in it. But quality of capture is horrible.
If anyone is readying this, could you please give me some ideas where to go with this. I don't know what to do from here

Question is answered

Similar Messages

  • No Video with FCP HDV with QTP

    I have a strange question....
    I have an Intel G5 iMac (10.4.11) and I capture and edit with FCP 5.0.4 using a Sony Z1 using the HDV 1080i50 sequence (I live in Hong Kong) I edit the video and export Quicktime movie using my sequence preset HDV 1080i50.
    I cannot play the exported video with QTP!!
    I hear sound but there is no picture. I only have a white screen!!
    I can open this video with FCP and it plays fine!!
    I can then take this exported video and transfer it to my G5 dual core tower (10.4.11) and the video plays fine in QTP!
    I would really like to be able to use QTP to play these videos! Both the iMac and G5 tower have the exact OSX and FCP. The only difference is one is Intel and the other is PPC! Has anyone had problems playing HDV videos on intel macs?
    Any ideas or suggestion?

    I've re-installed FCP Studio and the problem still persists....
    any ideas?

  • Capturing video with iMovie?

    How can I capture video with the built in iSight in my mac book pro with iMovie?
    Thanks.

    Hi Mark:
    Using iSight with iMovie
    http://docs.info.apple.com/article.html?artnum=61929
    Sue

  • I can't import HD video from Samsung OIS Duo into FCP. However, I can see the video with QT. In FCP, I just see a red bad with a yellow triangle (warning). Can someone help me. The video are Full HD 1080/60i?

    I can't import my HD videos (MP4) from my Samsung OIS Duo into FCP.
    However, I can see the video with QuickTime.
    In FCP, I just see a red box with a yellow triangle at the center(warning). Can someone help me. The video are Full HD 1080/60i.
    I also try converting from MP4 to DV. Cannot import the .DV either.
    Can someone help me?

    Could it be the case that you have "proxy media" selected in the preferences (under Final Cut Pro -> Preferences, click on "Playback" and see which is selected, proxy or optimized), BUT you are not creating proxy media when importing?
    If that is the case, either
      - switch to "original/optimized media",
    or
      - create the proxy media (control-click the clip(s) in the event browser, choose "Transcode media" e check the box for "create proxy media").

  • Can the exported video from FCP X play in WMV?

    (1) Can the exported video from FCP X play in WMV?
    (2) If not, can I convert with the help of Compressor 4 to make it to play in WMV?

    No to both. You need third party software to create WMV. Telestream has tools for this.

  • Faulty firewire port on DV7-3080ca​: can't capture video

    I have a Pavilion DV7-3080ca laptop, and I cannot properly capture video from my (Canon HV20) video camera, which I connect to the laptop's firewire (1394) port. Regular video can be captured but not without many dropped frames, and HD Video cannot be captured at all. When I connect the camera to the firewire port, the camera says "HDMI Out" on the camera screen, instead of "DV Out" as it should say, so there seems to also be a recognition problem.
    Searching on the Internet, I've learned that the problem is likely the Ricoh chipset that this firewire port uses, which is apparently more problematic than the preferred Texas Instruments (TI) chipset that some other laptops use for their firewire port.
    Does anyone know if there's a fix for this?  Is it something that HP could fix with a future BIOS update?  I was hoping that it may have been corrected in the last BIOS, but I just flashed my DV7 BIOS with the latest version from the HP web site (F.13), and it didn't help. I've also updated the graphics driver and the Intel chipset drivers; that didn't fix the problem either.
    My other alternative, if there is no fix, is to purchase an Expresscard with firewire ports that uses the TI chipset. Does anyone know if that would solve my problem? I don't want to spend the extra $50 if it won't.
    Some people speculate that the problem with the DV7 firewire ports is also partly because it shares IRQ16 with several other functions, in which case the Expresscard solution won't work, because I think it's on IRQ16 too.
    Any tips would be most appreciated.  I've tried contacting HP via Help chat and email, but neither response even acknowledged that the firewire port's Ricoh chipset is faulty, even though that seems to be common knowledge on the web.

    Has anyone tried to capture video with a firewire Expresscard rather than with the faulty Ricoh-chipset-based firewire port that's built in (but faulty) on the DV7 laptop? 
    It's my last hope, but I'm not optimistic. Some say it won't help because it shares IRQ16 with lots of other functions.  Don't really want to spend another $50 to work around a firewire port that should work properly in the first place, but I really need to be able to capture DV footage with this laptop.
    Have tried to contact someone at HP who's familiar with this problem, but no luck.

  • In v.11, how can I capture video but not audio from a camera?

    In v.11, how can I capture video but not audio from a camera?

    Rodney
    I see what you mean....Premiere Elements 10 appears to be the last version that had options for the user to select Capture Video and/or Audio in the its Capture Window.
    If you are doing DV data capture firewire into the Premiere Elements 11 Capture Windows and want a final file without audio and you cannot do this at the camera level, then consider....
    1. Do the Capture "to the Timeline" - video linked to audio result on the project's Video Track 1
    a. Right click the Timeline DV AVl and select Delete Audio and then edit accordingly.
    or
    b. Import the DV AVI but, when you go to export it, in the export settings, remove the check mark next to Audio so that the export contains only the video portion.
    Publish+Share/Computer/AVI with Presets = DV NTSC Standard
    Please let us know if any of that worked for you.
    Thank you.
    ATR

  • How can I capture video clips from you tube or my own DVD's

    How can I capture video clips from my own DVD's or You Tube type of media, I am trying to create a presentation using Key Note 

    As long as you are using the clips with copyright permission (the organisation I work for has this for some distributers) try Wondershare (I am sure other converters are available). You can install an extension for Safari (I use FastestTube 2.2.9.3) to download from YouTube. However, please be aware that you could be breaking copyright laws when so doing.

  • How can I capture video on my hp pavilion p6-2190ea

    how can I capture video on my hp pavilion p6-2190ea
    This question was solved.
    View Solution.

    Hi,
    Please read the following article, my suggestion: use Firefox (Flashget) :
      http://www.cnet.com.au/three-ways-to-save-video-from-the-internet-240091346.htm
    or you can use some othe download managers such as these:
       http://www.freedownloadmanager.org/
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Can I capture videos using my isight

    Can I capture videos using my isight using the capture button?

    Not in FCE, but you can using the QuickTime player.

  • Can I transfer videos with iCloud's

    Can I transfer videos with iCloud from one ios device to another?

    Welcome to the Apple Support Communities
    I'm sorry, but you can't transfer videos to iCloud and you can't increase local storage after buying the device. If you want, you can put your videos on Dropbox or a similar cloud service if you don't want them on your iPad storage

  • I am using Toast 11 to burn dvd's. With FCP10.1.3  I could go into the FCP shared folder grab the encoded .m2v file and drag it into Toast 11 and author dvd and burn.  How can you do this with FCP 10.1.4?

    I am using Toast 11 to burn dvd's. With FCP10.1.3  I used to go into the FCP shared folder grab the encoded .m2v file and drag it into Toast 11 and author dvd and burn.  How can you do this with FCP 10.1.4? 

    BenB it creates a disc image only and it's not in .m2v. I think it saved it as an Apple Pro Res 422 format instead. The disc image file format will not allow
    Toast 11 to create menus etc.  Thanks for your help.

  • How can I capture video directly into FCP without recording to tape first?

    I hooked my Sony VX2000 to the computer via firewire and opened the Log and Capture dialog box. The video from my camera shows correctly in the preview window.
    I click the Capture Now button and the capture window opens but no video displayed. The message below the window says "Waiting for Timecode".
    I guess the camera doesn't send timecode when it's not recording so I press the record button. Now video shows up in the capture window. After 16 frames it freezes and an error box pops up that says "Capture Now has reached the end of the tape. All existing footage between the point where you started the capture and the end of the tape was captured successfully."
    Foiled again! This has been a problem from time to time when I want to capture video from a source that does not supply timecode.
    Is there any settings I can change to capture video directly from a camera using FCP without having to record it to tape in one step and then capture it in a second step?
    Thanks,
    Rob:-]
    FCP 5.1.2   Mac OS X (10.4.8)   Dual 1.8GHz Power PC G5, 3GB ram

    I thought I had tried that. Thanks, that was the answer.
    I am aware of the danger of not having tape backup. Having worked with the new Panasonic AG-HVX200 it is a chore to free up the P2 cards fast enough to keep from starving the camera crew. Copying the P2 contents to a single hard drive is the practice but leaves the whole shoot at the mercy of a single point of failure.
    As far as my capturing directly to HD, it isn't a problem for short podcasts that could be recreated quickly if lost. Also, I can still record to tape in the camera but avoid the second step of capture when I'm in my edit bay anyway.
    Peace,
    Rob:-]

  • Unable to capture video with MSI StarForce 822 GeForce 3!

    I have a MSI StarForce 822 GeForce3 graphics card with 64 MB DDR SDRAM on it. I have VGA Out, as well as TV-out (AV), TV-out (S-video), and TV-in(?) (S-video).
    This brings me to two questions:
    First, I have NEVER been able to figure out how to use the TV-in (S-video) port. I have tried numerous programs designed to capture video, including the one that came with the graphics card, and none of them recognize the card's TV-in. Do you have any recommendations as to how to use this port to capture video?
    Second, in reading through the online manual for the graphics card on the company's website (under the name G3 Pro-VT64D MS-8822), I saw that the card supposedly has the capability of "High-quality HDTV/DVD playback" (8822 v2.0.pdf, page 8 ). However, in playing back DVD's through the card's s-video output onto my HDTV-ready monitor, I definately do not see HD quality videos. Could explain why this is the case?
    I have an assignment coming up where I must do some video-editing work, and thus I am posed with a situation where I need to capture video using this card (and I can't afford to buy something new for the moment).
    Thanks for your help.
    Charles Bergmeier

    If you have the Video Capture Driver installed then the video capture program should see it. On MSI site version 1.16 of the driver is available for download.
    If you still have problems (e.g. too many frames lost) you can try using Virtual VCR (worked best in my case).

  • Can't capture video using iSight camera in QuickTime 7.4 (92)

    OK, I see that there are plenty of "bugs" with Quicktime Version 7.4 (92), but I don't see the problem I am having, posted anywhere. Here goes...
    I cannot capture video using my [Firewire] iSight camera on my CoreDuo MacMini. I definitely used to be able to do this. When I go to File>New Movie Recording, I get a back/blank Movie Recording window and that's it. I click on the Red/Record button and nothing happens. The timer doesn't even advance. Just sits there. When I try to stop the recording, I get the following message:
    *"Recording failed because no data was received.*
    *Make sure that the media input source is turned on and playing."*
    I can still capture audio, although had some problems and had to "downgrade" to version 7.3.x and subsequently reinstalled 7.4. Now the audio works but still no video.
    A few things:
    1. YES, the iSight camera works - I can use it in iMovie, iChat, Photobooth, etc. - for both video and audio.
    2. As I mentioned, I tried "downgrading" (using "Pacifist") but still no video.
    3. I re-installed Version 7.4 and the audio problems cleared up, but again, still unable to capture video.
    3. All software updates installed.
    Any ideas???
    Thanks!

    "As I mentioned, I tried "downgrading" (using "Pacifist") but still no video."
    See QuickTimeKirk’s posting in the following thread:
    http://discussions.apple.com/thread.jspa?threadID=1357579&tstart=0
    Try the following:
    Trash com.apple.LaunchServices.plist
    It's located in your account:
    HD/Library/Preferences/com.apple.LaunchServices.plist
    Delete the file, restart (a new .plist will be created) and quicktime hopefully will work again w/o doing an Archive & Install.
    +If you want to do an A&I:+
    Do an archive and install of your OS from the OS disc. Stop at the QT upgrade you need.
    http://docs.info.apple.com/article.html?artnum=301270 Scroll down to "Archive and Install”
    IMPORTANT: Maker sure you select "preserve user preferences and data" when you performed the A&I?
    Good luck!

Maybe you are looking for