Can't change activation only mode to off using the command line in Windows 7 64 bit

I used the command line to turn activation only mode on and now when I use teh command to turn it off it will not change the iTunes setup. I am on Windows 7 64 bit. I tried uninstalling itunes and reinstalling and it is stillin activation only mode.

Hi! Thx for your quick reply! I am still unsure what to do tho---see my questions below in bold:
Windows 7 comes with its own version of the standard PostScript driver. = Where is this driver? I have no idea how to find it, it doesn't show up in my Printer menu in FM?
Given that PostScript generated by a driver can be highly device-specific, you need to install the driver as modified by the PPD file for the device in question. Most printer manufacturers in fact provide a PostScript driver installer that associates their printer's PPD file with the standard Windows Printer driver and subsequently creates what is called a PostScript printer driver instance for the particular device on the I/O port you designate. = ??? I've only updated a PPD file for watermarks and have no idea what this means...is there a step-by-step instruction for this? I just need to download a PS driver to select that works & doesn't freeze up my FM when creating a .ps file.
The real question thus is exactly what are you trying to generate PostScript for? = I create a PS, & then use Distiller to create a PDF. This enables me to have a PDF that automatically has Bookmarks, the TOC/LOF/LOT & all corss-refs are hyperlinked, etc.
If you are trying to create PostScript for distillation into PDF, Acrobat installs a PostScript driver instance of its own, labelled Adobe PDF, that is associated with the Acrobat Distiller PPD. = I have tried the Adobe PDF selection from my Printer menu in FM, but it freezes up FM and I have to close the whole program & no PDF generates.
BTW, although you may be successful in installing and running FrameMaker 8 on Windows 7, in fact Adobe officially does not support FrameMaker 8 on Windows 7. = I don't know what to say---the upgrade is too expensive for some of us folks out here right now, so we all need to work with what we have for now!
I appreciate your help, thank you.

Similar Messages

  • How to load the boot menu using the command line , after the configuration change ?

    how to load the boot menu using the command line , after the configuration change ?

    Hi @Bask-48 
    Welcome to the HP Forums!
    It is a terrific place to find answers.
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp you are trying to change the boot order.  Here is a link to Configuring the Boot Order in the System BIOS
    that will assist you.
    Good Luck and Happy Holidays!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Can I use the Command Line Interface on Unix?

    Hi,
    We use 9iAS on Unix. We want to use Discoverer Command Line Interface on unix to export the worksheet query result. Can anyone know how to do this? I couldn't find out the command similar to dis5usr.exe for windows version.
    Thanks.
    Richard Qiu

    Hello Richard
    You can use the Discoverer EUL Command Line for Java utility. This was released with Discoverer 10g (9.0.4).
    Please refer to the documentation for more information on how to use this command line interface: 'Oracle Discoverer EUL Command Line for Java User's Guide 10g (9.0.4), Part No. B10274_01 (PDF)' The document is available from OTN at http://otn.oracle.com/documentation/discoverer.html
    Regards
    Discoverer Product Management

  • Can I create a new folder using the command line interface

    Hi.
    Is there a way to create a new folder in an existing business area, from the command-line?
    We have an application that provides an interface for the user to create a table and load flat file data into the table. After loading the data, the user will verify the loaded data using discoverer. If there is a command line interface to create a new folder, then the script that created the table can also call the discoverer command line to create a new folder for the new table. Is this possible?
    Thanks

    Hi,
    I think I am having a similar question here. I am using Oracle 10g on Windows xp.
    I logged in to Oracle from command prompt. I used command “create directory myFunDir as 'd:/funDir';”. Oracle returns: “Directory created”. But I couldn’t find the directory “myFunDir”! Where is it?
    Thanks.
    Newbie.

  • Can I change computer client agent properties using the command line ?

    I need to make a script that will change some settings in several configuration manager 2007.
    The settings I have to change are:
    - policy polling interval
    - mandatory reminders
    Is it possible to use cmdlets or WMI classes to change these settings in configuration manager 2007 ?

    I've personally been unsuccessful in trying to attempt this, but I am also not too command line savvy. There may be a creative workaround out there somewhere though.

  • I have NDS 4.16, and I have iMS 5.1 running on Sun, Solaris 8. I want to know how can I add users using the command line instead of the console. My problem is how to set the password to this user?

     

    You can use ldapmodify found in <ServerRoot>/shared/bin
    for example
    ./ldapmodify -h ldaphost -D "cn=directory manager" -w password -f <name of LDIF file>
    Here's an example LDIF file
    dn: uid=cms,ou=people,o=balius.com,o=Universe
    changetype: add
    objectClass: person
    objectClass: organizationalPerson
    objectClass: inetOrgPerson
    objectClass: inetUser
    objectClass: ipUser
    objectClass: inetMailUser
    objectClass: inetLocalMailRecipient
    objectClass: nsManagedPerson
    objectClass: userPresenceProfile
    cn: Chad M. Stewart
    sn: Stewart
    initials: CMS
    givenName: Chad
    pabURI: ldap://host:389/ou=cms,ou=people,o=balius.com,o=Universe,o=pab
    mail: [email protected]
    mailDeliveryOption: mailbox
    mailHost: my.mailhost.com
    uid: cms
    dataSource: Chad by hand
    userPassword: users-password-here
    inetUserStatus: active
    mailUserStatus: active
    mailQuota: -1
    on a subsequent search you'd see something like
    userpassword: {SHA}S3e+L/K6

  • How I can set my default browser mozilla firefox from the command line in Windows 7?

    I need to set my default browser mozilla firefox from the command line, ie without using the GUI.

    '''-setDefaultBrowser''' is the correct command - you need the two capital letters.
    Why Firefox 17.0.1? You would be missing a number of important security updates. Firefox 17.0.'''9''' is the current ESR release version.

  • How could I turn off the Command Key to Windows Key mapping in Remote Desktop for Mac 8

    I'd like to be able to turn the Command key->Windows key mapping off.  In this new app, whenever I use the Command key to initiate a Mac-side function, it registers a press of the Windows key within the Remote Desktop session.  Speaking only
    for myself, I use the Command Key for quite a lot of Mac operations, while my need and expectation for a Windows key press is zero.

    I'd like to be able to turn the Command key->Windows key mapping off.  In this new app, whenever I use the Command key to initiate a Mac-side function, it registers a press of the Windows key within the Remote Desktop session.  Speaking
    only for myself, I use the Command Key for quite a lot of Mac operations, while my need and expectation for a Windows key press is zero.
    Agreed. Cannot stop it by disabling the "Windows" key (from within Windows 7). Every time I Cmd-Tab to change apps, the Start Menu pops up,
    and persists, overlaying other app windows. Much more than annoying.
    Also, there is no Clipboard Sharing, apparently. Love typing in long binary strings into the Registry.

  • How can I start System Preferences from the command line?

    Hello All,
    I have an issue I'm not quite sure how to solve. I have been tasked within my business environment  with tightening security on a Mac Leopard system and I've been granted Admin Rights to do this on a temporary basis.
    The problem is as follows:
    1) The original Sys Admin that set up this system is gone, no longer available.
    2) He was a Dvorak Keyboard fan and set up the system for a Dvorak Keyboard.
    3) The system actually has a standard Apple keyboard and is marked accordingly, i.e., qwerty (Most Users in the building have stopped using this system altogether - a terrible waste of a good system - even though some of their apps can be run normally (US style qwerty settings). The command line is useless, as is texteditor.app and a few others unless you know Dvorak layout)
    5) When I open System Preferences, the Dvorak keyboard checkbox is grayed out and I cannot change it. There is no lock at the bottom of that particular screen for me to unlock.
    6) Even though I select the US Keyboard at Login, and some apps work accordingly (like MatLab for example) the terminal is borderline useless. I spent over 2 hrs yesterday doing what should have been able to be done in about 30 minutes. I estimate a frustrating and mistake prone additional 8 to 10 hours to do what is normally a a 4 hour job at the command-line.
    7) I do not have the time or desire to re-mark all the keys on the keyboard, particularly since it is not my call to do so, nor do I have the time to re-learn Dvorak touch-typing, and finally I do not want to re-load the entire system. I just want to change the darn keyboard to a standard qwerty keyboard that is somewhat useful in a terminal environment with vi, command line, etc. It's either that or I go mildly insane
    This is frustrating as all get-out. The new Admin logged in and was able to uncheck his Dvorak settings (he is not a UNIX guy, nor is he comfortable om Macs), and we were hoping this was a system wide setting, but No. We re-booted the system, I logged in, still Dvorak, and the checkbox was still grayed out.
    So I figure, short of re-loading the entre system and all the applications necesary, I can either start the Systems Preferences GUI using sudo and hopefully that will change system-wide settings, or I can delete the .AppleSetupDone file and resetup the system (if the keyboard settings are part of the setup) without spending a couple of days reloading everything and re-setting up users, networks, etc.
    Needless to say, I am hoping for the easiest and quickest solution to this extremely frustrating and  aggravating problem.
    Thanks.

    For my situation the following C# code does the job:
        Process.Start(
           @"c:\Program Files\National Instruments\CVI71\cvi.exe",
           @"c:\temp\experiment.c" );
    The file must already exist.

  • How to enable telemetry logs and where can i find the command line for sun

    Hi i tried creating the telemetry logs directory but the logs are not being populated. i created the following directory:-
    /opt/SUNWmsgsr/data/telemetry/imap/usersns1
    where usersns1 is the userid.
    Also pl. tell me where can i get the command list for sun one messaging server to use the command line utility to list, delete mailboxes. also can i search for all the mailboxes under one domain name. if yes then which command i have to use.
    thanks in advance.

    Hi,
    Hi i tried creating the telemetry logs directory but
    the logs are not being populated. i created the
    following directory:-
    /opt/SUNWmsgsr/data/telemetry/imap/usersns1
    where usersns1 is the userid.Make sure the permissions (ownership) on the user directory and the sub directory match those that messaging server uses - by default mailsrv:mail. This is the most common cause of the telemetry data not being created. The other thing to verify is that the user's account isn't stored as user@domain, otherwise you may need to create the directory as the entire user@domain (try both just to be sure).
    Also pl. tell me where can i get the command list
    for sun one messaging server to use the command line
    utility to list, delete mailboxes. also can i search
    for all the mailboxes under one domain name. if yes
    then which command i have to use.The Messaging Server reference guide is a good place to start (lists all the command-line utilities/flags and what-not):
    http://docs.sun.com/app/docs/doc/819-4429?l=en
    The mboxutil command is used to list/create/delete mailboxes and you can use a pattern to only list those mailboxes in a specific domain.
    Regards,
    Shane.
    thanks in advance.

  • Universal Track Mode? off is the only way to make a bus (stereo) ?

    Is Universal Track Mode? (Off)unchecked, the only way to make a bus (stereo) ?
    In logic 9 is this the case?
    Can someone out there verify this please? Or am I just missing some thing?
    If Universal Track Mode is (ON)checked in the audio preferences tab, all of the bus sends in the send section and the bus output choice in the channel strip output section are only mono?? thanks for any reply.

    I've been using UTM On (the recommended choice) since Logic 4.x and my busses have always been stereo, just fine.

  • ITunes stuck in activation only mode

    I have been unable to fix this with copious google searches. Computer is running Windows XP Pro SP3.
    We are using the appropriate switches to launch iTunes in activation only mode and also to take it back out of activation only mode. I have tried creating separate shortcuts and I have tried doing it from a command prompt window.
    iTunes is stuck in activation only mode and won't come out of it. If I log in to the computer with a different user account I am able to launch in normal mode. This problem seems profile related but I have searched the registry and been unable to find a key for iTunes that would obviously be causing this problem. The app has been reinstalled - made no difference.
    What is the problem here? I would prefer to not delete the profile that iTunes is "stuck" in if possible. Thanks

    Logged this as a SR on Metalink and the problem seems to be down to use of colons in my connection names.
    I was using a naming convention of
    host:SID     for accounts connecting as system and
    host:SID:schema     for accounts connecting as specific schema
    Which nicely groups and orders my connections by host. Sadly this prevents edit of stored pl/sql units (package, procedures, functions)

  • TS3432 help!! how can i change settings to take "shuffle" off????

    help!!   how can i change settings to take "shuffle" off???

    Select a particular song, album, artist, playlist, etc. If shuffle is on, touch the shuffle icon again

  • I use an iphone 3gs can i set one of the song as ring tone or i will only be able to use the inbuilt ringtones?

    i use an iphone 3gs can i set one of the song as ring tone or i will only be able to use the inbuilt ringtones?

    yes you can
    A. how to make a ringtone using iTunes
    First, open up iTunes in order to make a ringtone using iTunes. Find the song you want to turn into a ringtone by browsing through your music library.
    Next, find exactly what part of the song you want to make a ringtone using iTunes. For example, if you want to use a specific section of the song from 21 seconds to 40 seconds, make a note of where you want the ringtone to begin and end.
    Now, right click on the song you want to turn into a ringtone. Click "Get Info". Now, in order to make a ringtone using iTunes, click the "Options" tab.
    Check the "Start Time" check box. Type in the point in the song where you want the ringtone to start in the format "minute:seconds" (e.g. the second mark would be 0:20). You can also be more precise by adding a period and putting milliseconds in after that (e.g. 0:20.150, would be 20.150 seconds). Also, click the "Stop Time" check box and enter where you would like the ring tone to end. Keep in mind ringtones can only be around 39 seconds maximum. Press "Ok". We are almost done making a ringtone in iTunes
    Now, right click on the same song. Select "Convert AAC Version". If it is in another file format, you can go to "Edit" then "Preferences" and under the "General" tab click "Import Settings"; change the file format to AAC. After you select "Convert AAC Version" a new file will be created, but it will only be the segment of the song that you specified earlier.
    Now, you have to find the file you just created. Right click on the new, shorter song and select "Open in Windows Explorer". The file extension should be .m4a. Rename the extension to .m4r by right clicking the file and selecting "Rename".
    Now you can delete the shortened version of the song in your iTunes library. Then, double click the .m4r file and it will loaded into your iTunes Ringtone list. Now you can make a ringtone using iTunes!

  • When I opened up a new tab, I used to get the Speed Dial page. I like that. However, since I updated my AVG anti-virus program, now when I open a new tab, I get the AVG search page. Can I change it back so that I get the Speed Dial?

    In the past, when I opened up a new tab, I used to get the Speed Dial page. I like that. However, since I updated my AVG anti-virus program, now when I open a new tab, I get the AVG search page. Can I change it back so that I get the Speed Dial?

    I had that too. On the bottom right of the AVG search page is a link which leads you to where you can switch it off. This restores normal Speed Dial operation.
    This hijacking has really cheesed me off. I've just downloaded Avast and am going to put it on in place of AVG.

Maybe you are looking for