Can't change blog entries date - double clicking in date field doesnt work

I've read some posts here that you can't manually arrange the order in wich your blog entries appear, but you can change their dates, so that iWeb will always show from newest to oldest.
The thing is when I'm at the entries pane and I double click an entry's date field, nothing happens. I simply can't edit their date (wich means I can't rearrange them, I'm stuck with the order I created them).
When I double click their title I can change it, and if I press TAB it simply focus out of the editing pane, it doesn't move to the date field.
Any ideas why this is happening ? Im using iWeb 09 (3.0.1)

Found the solution! (I'm using iPhoto 4, BTW)
I click the film roll once.
I highlight the date field and change to my preferred date (MM/DD/YYYY format).
I hit "tab" or "enter" once.
I close the iPhoto window!
iPhoto quits, which is awkward, but when I reopen it, the date is set, and sticks.
If anyone else has this problem and has not migrated to the new iLife, this should do it for them!

Similar Messages

I updated to MAvericks and my double click on the trackpad doesnt work

I updated to MAvericks and my double click on the trackpad doesnt work.
Also the spotlight feature doesnt work either, it makes a sound everytime i click on it.
please help.
Thank you!
fxm

Did you make a clean install and restore the library from a backup? No.
Or did you install the new system amd new version on top of the old system? Yes.
What version did you upgrade from? 3.4
Is your Aperture library onyour internal drive or also on an external drive? External
During the update, has your Aperture library been moved in any way? No, its still where it was on the external drive.
Thanks for your help. Ideas?

On all my other apps and browsers, I have my system set up to open things with a doubleclick. In Firefox, however, a single click opens things, and it's very annoying since I wind up with duplicate pages -- where can I change this option to double-click?

I think my question explains my issue, but I particularly have this issue on www.pogo.com when I try to open a game room. The system tells me someone else with my user name is trying to enter the room at the same time, so it boots us both out. I have contacted Pogo, and they tell me it's a Firefox issue. There must be an option somewhere, like a OS has, to pick between single and double clicks to open an app, but I can't find it in Firefox. My mouse is set in XP for double-click.

Hi Roger
Thank you for your reply.
My original feed is: http://casa-egypt.com/feed/
However, because I modified the feed http://feeds.feedburner.com/imananddinasbroadcast and nothing changed, I redirected it to another feed and then I deleted this feed.
Is there any way to change the feed in itunes? The only feed I have now is http://feeds.feedburner.com/CasaEgyptStation
I tried to restore the feed http://feeds.feedburner.com/imananddinasbroadcast but feedburner refused.
I know that I missed things up but I still have hope in working things out.
Thanks is advance.
Dina
Message was edited by: dinadik

How can I change of page with double click on my I-pod nano 7th generation?

How can I change of page with the double click feature on my I pod nano 7th generation?

I can't really understand what you are asking. Can you elaborate?

Double click on the list doesnt work

Hi,
We are using ITS 6.20. In the GUI when we search for a set of values like user list, if we double click on one item to populate on to the screen, the GUI just hangs... This is happening on both out test environments. Any ideas?

Hello Satya,
if this is happening in an SAP standard transaction, I suggest to open an OSS message.
Regards,
Jan

With Mavericks I have to hold command key down and double click to get a sub folder to open in a new window. Can I go back to just double clicking ?

With Mavericks I have to hold command key down and double click to get a sub folder to open in a new window. Can I go back to just double clicking ?

Of course. To do it, open a Finder window, go to Finder menu (on the menu bar) > Preferences > General, and untick "Open folders in tabs instead of new windows".

Can we change the doc date in a purchase order ?

can we change the doc date in a purchase order ?
i have created PO with wrong dates but now want to correct it, but its not letting me do it ...why ?

I don't think DOC DATES can be changed. You can only change the posting dates of the Goods receipt and Invoice documents as that is what matter for your financial consolidation.
Regards,
Ravi
Note : Please mark the helpful answers

How can I OPEN files I just downloaded? They're on the DOWNLOADS screen of Firefox but I can't open them even after double-clicking? And they're not on the FOLDERS as well. I tried RIGHT-CLICK and the "open dowloading folder" or something does not work! P

How can I OPEN files I just downloaded? They're on the DOWNLOADS screen of Firefox but I can't open them even after double-clicking? And they're not on the FOLDERS as well. Even the right-click is not working ... the "open containing folder" does not work.
== This happened ==
Not sure how often
== ALWAYS! ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2)

Open Containing Folders is never active.

Org Management - How can I change the start date of all the org units

How can I change the start date of all the org unit objects and its relationships at one shot ? I have created some 100 Org units with the wrong start date. Please suggest.
Thanks in advance..
Cheers
Vijay

Hello Archana,
Thanks a lot... This has solved my issue...
Cheers
Vijay

I am using a MacBook Air, OS X ver 10.9.4, mail ver 7.3. Intermittently I can not open individual mails when double clicking on them. I must go out of mail and back in before mail will open.

I am using a MacBook Air, OS X ver 10.9.4, mail ver 7.3. Intermittently I can not open individual mails when double clicking on them. I must go out of mail and back in before mail will open.

Hi Eric
Good idea, but I am still having the same problem.
Thanks very much
Neil Lilien

Can I change the count date for a PI Document?

Dear All,
By mistake, I entered count date as 30-Sep-2010 instead of 01-Oct-2010 while entering count for a PI document.
Now, Can I change the count date to 01-Oct-2010 ?
The issue here is I am not allowed to post the difference today since the count date belongs to the previous period which is 09 2010.
pls suggest how can I resolve this issue?
regards,
Shetty

Hi Shetty,
I am assuming your issues is around posting the PI document and the count date i.e.Posting period is in last month and hence you are stuck.
If your client is ok to perform posting in previous period then try MMRV and allow posting in previous period and complete the Inventory counting posting and adjustment (write off differences and revert back the settings)
Other option would be to used above suggestion post PI doc without difference. Then create new PI document with correct count date.
Hope this helps.
Thx
MJ

Can I change the posting date in CO13 to cancel a confirmation?

Hi all
I'd like to know how can I change the posting date using CO13.
So I have a confirmation in date 30/6 for exemple, but I'd like to cancel it in posting date 1/7, but the systems takes the date of the original confirmation. Can I change it any way?
Thanks in advance
Points will be given

Dear Roger,
this is only possible in case if the bookin periode is closed. In this case it's allowed to change the booking date in CO13 and the date field gets automatically inputable, normaly it's greyed out.
As long as the booking periode is open, the system automatically use the date from confirmation.
Hope this help.
Regards,
Sabine

Can we change the system date using Sql

can we change the system date using Sql statement..
can anyone help
Tariq.

There is an initialization parameter called FIXED_DATE which lets you set a fixed sysdate for testing purposes, and you can alter that date using the ALTER SYSTEM command, but as implied by the name you are setting a data/time that doesn't change. Since the normal sysdate is derived from the O/S it cannot be altered through SQL

My ITunes is acting odd. I have to click on the tabs (ie Music) on the left a bunch of times in order to get to the screen. Also, I can't edit track names by double clicking on them. I downloaded the new ITunes as well. Any solutions? Thanks.

My ITunes is acting odd. I have to click on the tabs (ie Music) on the left a bunch of times in order to get to the screen. Also, I can't edit track names by double clicking on them. I downloaded the new ITunes as well. Any solutions? Thanks.

bump

Double click on list field in ALV grid control

Hello all,
I developed a report with a ALV grid control. I would like to move some functionality from marking a line and pressing a button in the status line to double clicking a specific field in the output list and execute a command there (i.e. double click on PO number and go to PO display TAC then). Can anybody provide some example coding for that?
Thanks so much for your help!
Torsten

Here is your sample program. Copy this code into a z program. Create the screen 100 with a container in it and name it "ALV_CONTAINER". Create the gui-status with "BACK".
report zrich_0001.
tables: ekko.
data: begin of i_alv occurs 0,
      ebeln type ekko-ebeln,
      end of i_alv.
*       CLASS cl_event_receiver DEFINITION      Handles Double Click
class cl_event_receiver definition.
public section.
    methods handle_double_click
      for event double_click of cl_gui_alv_grid
      importing e_row e_column.
private section.
endclass.
*       CLASS CL_EVENT_RECEIVER IMPLEMENTATION    Handles Double Click
class cl_event_receiver implementation.
method handle_double_click.
    perform drill_down using e_row-index.
endmethod.
endclass.
data: alv_container type ref to cl_gui_custom_container.
data: event_receiver type ref to cl_event_receiver.
data: alv_grid       type ref to cl_gui_alv_grid.
data: layout    type lvc_s_layo.
data: fieldcat type lvc_t_fcat.
selection-screen begin of block b1 with frame title text-001 .
select-options: s_ebeln for ekko-ebeln.
selection-screen end of block b1.
start-of-selection.
perform get_data.
call screen 100.
*      Module status_0100 OUTPUT
module status_0100 output.
set pf-status '0100'.
set titlebar '0100'.
data: variant type disvariant.
variant-report = sy-repid.
variant-username = sy-uname.
* Create Controls
create object alv_container
         exporting
               container_name    = 'ALV_CONTAINER'.
create object alv_grid
         exporting
               i_parent          = alv_container.
* Create Event Receiver
create object event_receiver.
* Populate Field Catalog
perform get_fieldcatalog.
call method alv_grid->set_table_for_first_display
      exporting
           is_layout              = layout
           is_variant             = variant
           i_save                 = 'U'
           i_structure_name       = 'I_ALV'
      changing
           it_outtab       = i_alv[]
           it_fieldcatalog = fieldcat[].
*   handler for ALV grid
set handler event_receiver->handle_double_click for alv_grid.
endmodule.
*      Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
case sy-ucomm.
    when 'BACK' or 'CANC'.
      if not alv_container is initial.
        call method alv_container->free.
        clear: alv_container.
        free : alv_container.
      endif.
      if sy-subrc = 0.
        set screen 0.
        leave screen.
      else.
        leave program.
      endif.
    when 'EXIT'.
      if not alv_container is initial.
        call method alv_container->free.
        clear: alv_container.
        free : alv_container.
      endif.
      leave program.
endcase.
endmodule.
* FORM GET_DATA
form get_data.
select * into corresponding fields of table i_alv
            from ekko
                 where ebeln in s_ebeln.
sort i_alv ascending by ebeln.
endform.
*      Form Get_Fieldcatalog - Set Up Columns/Headers
form get_fieldcatalog.
data: ls_fcat type lvc_s_fcat.
refresh: fieldcat.
clear: ls_fcat.
ls_fcat-reptext    = 'PO Number'.
ls_fcat-coltext    = 'PO Number'.
ls_fcat-fieldname = 'EBELN'.
ls_fcat-ref_table = 'I_ALV'.
ls_fcat-outputlen = '12'.
ls_fcat-col_pos    = 1.
append ls_fcat to fieldcat.
endform.
* DRILL_DOWN
form drill_down using index.
read table i_alv index index.
if sy-subrc = 0.
    set parameter id 'BES' field i_alv-ebeln.
    call transaction 'ME23' and skip first screen.
    if not alv_container is initial.
      call method alv_container->free.
      clear: alv_container.
      free : alv_container.
    endif.
endif.
endform.
Regards,
Rich Heilman

Can't change blog entries date - double clicking in date field doesnt work

Similar Messages

Maybe you are looking for