Can't change contact name of recent numbers I call...

I recently called a number and I would like to add that number to my contact's with the appropriate name.  Visiting the profile and even typing the number in again on the keypad doesn't seem to give  any option to save this contact with an appropriate name.  I can't believe i'm even here typing this.  The small 3 dot's lower right hand corner only give the option to block or remove contact. 
I thought this was 2014.

Yes absolutely amateur and unbelievably inconsiderate and above all DUMB to omit this function. I now have a long list of numbers in recently called and a big hassle if I want to figure out who is who. I thought it was either me being thick, or something temporary glitch. But obviously no one at Skype CARES, is this true? Do I pay for this service???

Similar Messages

  • How can I change the order of phone numbers in a contact?

    I have contacts that have more than one phone number (I am sure we all have those in this day and age). The importance of the phone numbers varies over time and I want to have the most important one as first on the list. How can I change the order that phone numbers are displayed within a contact?
    Thanks for any help.

    Currently, the order in which the phone numbers appear (in a contact) is dependent on the sequence to which you enter them. There is no way to change that order other than re-entering them in the desired order.

  • I have two iphone 4's with the same name on one computer.  Can I change the name of one so that I can sync each phone separately

    I have two iphone 4's with the same name on one computer.  Can I change the name of one so that I can sync contacts separately?

    How to rename your device in iTunes

  • How can I change the name of item in TableViewController iOS

    How can I change the name of item in TableViewController? I want to be able to change the title of an item if I added one. Code:
    //  ViewController.m
    //  Movie List
    //  Created by Damian on 20/02/15.
    //  Copyright (c) 2015 Tika Software. All rights reserved.
    #import "ViewController.h"
    @interface ViewController ()
    These outlets to the buttons use a `strong` reference instead of `weak` because we want
    to keep the buttons around even if they're not inside a view.
    @property (nonatomic, strong) IBOutlet UIBarButtonItem *editButton;
    @property (nonatomic, strong) IBOutlet UIBarButtonItem *cancelButton;
    @property (nonatomic, strong) IBOutlet UIBarButtonItem *deleteButton;
    @property (nonatomic, strong) IBOutlet UIBarButtonItem *addButton;
    // A simple array of strings for the data model.
    @property (nonatomic, strong) NSMutableArray *dataArray;
    @end
    #pragma mark -
    @implementation ViewController
    - (void)viewDidLoad
        [super viewDidLoad];
         This option is also selected in the storyboard. Usually it is better to configure a table view in a xib/storyboard, but we're redundantly configuring this in code to demonstrate how to do that.
        self.tableView.allowsMultipleSelectionDuringEditing = YES;
        // populate the data array with some example objects
        self.dataArray = [NSMutableArray new];
        NSString *itemFormatString = NSLocalizedString(@"Movie %d", @"Format string for item");
        for (unsigned int itemNumber = 1; itemNumber <= 0; itemNumber++)
            NSString *itemName = [NSString stringWithFormat:itemFormatString, itemNumber];
            [self.dataArray addObject:itemName];
        // make our view consistent
        [self updateButtonsToMatchTableState];
    #pragma mark - UITableViewDelegate
    - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section
        return self.dataArray.count;
    - (void)tableView:(UITableView *)tableView didDeselectRowAtIndexPath:(NSIndexPath *)indexPath
        // Update the delete button's title based on how many items are selected.
        [self updateDeleteButtonTitle];
    - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
        // Update the delete button's title based on how many items are selected.
        [self updateButtonsToMatchTableState];
    - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
        // Configure a cell to show the corresponding string from the array.
        static NSString *kCellID = @"cellID";
        UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:kCellID];
        cell.textLabel.text = [self.dataArray objectAtIndex:indexPath.row];
        return cell;
    #pragma mark - Action methods
    - (IBAction)editAction:(id)sender
        [self.tableView setEditing:YES animated:YES];
        [self updateButtonsToMatchTableState];
    - (IBAction)cancelAction:(id)sender
        [self.tableView setEditing:NO animated:YES];
        [self updateButtonsToMatchTableState];
    - (void)actionSheet:(UIActionSheet *)actionSheet clickedButtonAtIndex:(NSInteger)buttonIndex
        // The user tapped one of the OK/Cancel buttons.
        if (buttonIndex == 0)
            // Delete what the user selected.
            NSArray *selectedRows = [self.tableView indexPathsForSelectedRows];
            BOOL deleteSpecificRows = selectedRows.count > 0;
            if (deleteSpecificRows)
                // Build an NSIndexSet of all the objects to delete, so they can all be removed at once.
                NSMutableIndexSet *indicesOfItemsToDelete = [NSMutableIndexSet new];
                for (NSIndexPath *selectionIndex in selectedRows)
                    [indicesOfItemsToDelete addIndex:selectionIndex.row];
                // Delete the objects from our data model.
                [self.dataArray removeObjectsAtIndexes:indicesOfItemsToDelete];
                // Tell the tableView that we deleted the objects
                [self.tableView deleteRowsAtIndexPaths:selectedRows withRowAnimation:UITableViewRowAnimationAutomatic];
            else
                // Delete everything, delete the objects from our data model.
                [self.dataArray removeAllObjects];
                // Tell the tableView that we deleted the objects.
                // Because we are deleting all the rows, just reload the current table section
                [self.tableView reloadSections:[NSIndexSet indexSetWithIndex:0] withRowAnimation:UITableViewRowAnimationAutomatic];
            // Exit editing mode after the deletion.
            [self.tableView setEditing:NO animated:YES];
            [self updateButtonsToMatchTableState];
    - (IBAction)deleteAction:(id)sender
        // Open a dialog with just an OK button.
        NSString *actionTitle;
        if (([[self.tableView indexPathsForSelectedRows] count] == 1)) {
            actionTitle = NSLocalizedString(@"Are you sure you want to remove this movie?", @"");
        else
            actionTitle = NSLocalizedString(@"Are you sure you want to remove these movies?", @"");
        NSString *cancelTitle = NSLocalizedString(@"Cancel", @"Cancel title for item removal action");
        NSString *okTitle = NSLocalizedString(@"OK", @"OK title for item removal action");
        UIActionSheet *actionSheet = [[UIActionSheet alloc] initWithTitle:actionTitle
                                                                 delegate:self
                                                        cancelButtonTitle:cancelTitle
                                                   destructiveButtonTitle:okTitle
                                                        otherButtonTitles:nil];
        actionSheet.actionSheetStyle = UIActionSheetStyleDefault;
        // Show from our table view (pops up in the middle of the table).
        [actionSheet showInView:self.view];
    - (IBAction)addAction:(id)sender
        [self.dataArray addObject:@"New Movie"];
        // Tell the tableView about the item that was added.
        NSIndexPath *indexPathOfNewItem = [NSIndexPath indexPathForRowself.dataArray.count - 1) inSection:0];
        [self.tableView insertRowsAtIndexPaths:@[indexPathOfNewItem]
                              withRowAnimation:UITableViewRowAnimationAutomatic];
        // Tell the tableView we have finished adding or removing items.
        [self.tableView endUpdates];
        // Scroll the tableView so the new item is visible
        [self.tableView scrollToRowAtIndexPath:indexPathOfNewItem
                              atScrollPosition:UITableViewScrollPositionBottom
                                      animated:YES];
        // Update the buttons if we need to.
        [self updateButtonsToMatchTableState];
    #pragma mark - Updating button state
    - (void)updateButtonsToMatchTableState
        if (self.tableView.editing)
            // Show the option to cancel the edit.
            self.navigationItem.rightBarButtonItem = self.cancelButton;
            [self updateDeleteButtonTitle];
            // Show the delete button.
            self.navigationItem.leftBarButtonItem = self.deleteButton;
        else
            // Not in editing mode.
            self.navigationItem.leftBarButtonItem = self.addButton;
            // Show the edit button, but disable the edit button if there's nothing to edit.
            if (self.dataArray.count > 0)
                self.editButton.enabled = YES;
            else
                self.editButton.enabled = NO;
            self.navigationItem.rightBarButtonItem = self.editButton;
    - (void)updateDeleteButtonTitle
        // Update the delete button's title, based on how many items are selected
        NSArray *selectedRows = [self.tableView indexPathsForSelectedRows];
        BOOL allItemsAreSelected = selectedRows.count == self.dataArray.count;
        BOOL noItemsAreSelected = selectedRows.count == 0;
        if (allItemsAreSelected || noItemsAreSelected)
            self.deleteButton.title = NSLocalizedString(@"Delete All", @"");
        else
            NSString *titleFormatString =
            NSLocalizedString(@"Delete (%d)", @"Title for delete button with placeholder for number");
            self.deleteButton.title = [NSString stringWithFormat:titleFormatString, selectedRows.count];
    @end

    Hey JB001,
    Sounds like you have more going on than just a simple issue with Home Sharing and more dealing with Wi-Fi syncing. Start with the article below and see if that may resolve it.
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
    http://support.apple.com/kb/TS4062
    If it does not work out, then may I suggest contacting Apple for further assistance to walk you through it or just take that time that you were talking about to sort it out.
    Contact Apple Support
    https://getsupport.apple.com/GetproductgroupList.action
    Regards,
    -Norm G.

  • Can I Change the Name of My Podcast?

    Can I change the name of my podcast without losing subscribers, likes, and library of interviews?

    You can change the name provided that the method you are using isn't one of those which includes the title in the URL, and so would change the URL. If you do that iTunes will lose contact with the feed. To get round that you would have to leave the old feed in place, adding the 'itunes:new-feed-url' tag to redirect to the new version as described here:
    http://wilmut.uk/move

  • How can I change the name of a Materialized View?

    How can I change the name of a Materialized View?

    Oracle permitted renaming the snapshot in the earlier versions of 8i. However, it does not permit renaming the materialized view in 9i or 10g.
    SQL> rename mymatview to mymatview2;
    rename mymatview to mymatview2
    ERROR at line 1:
    ORA-32318: cannot rename a materialized view
    SQL> disconnect
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - 64bit Production
    With the Partitioning, Oracle Label Security, OLAP and Data Mining options
    SQL> rename mymatview to mymatview2;
    rename mymatview to mymatview2
    ERROR at line 1:
    ORA-32318: cannot rename a materialized view
    SQL> disconnect
    Disconnected from Oracle9i Enterprise Edition Release 9.2.0.3.0 - 64bit Production
    With the Partitioning option
    JServer Release 9.2.0.3.0 - Production

  • How can I change the name of a computer I'm getting rid of?

    How can I change the name of the computer to my granddaughter's name? It's now called "My name" G5 iMac. I would also like to delete that computer icon in my Devices on my MacbookPro.

    I guess my reply to these questions in your other topic did not help?
    The name of the computer is in System Preferences Sharing pane.
    If something appears under DEVICES in a Finder window sidebar, you can click hold on it and drag it off the sidebar. If it appears under SHARED, it should no longer appear there once if that iMac is no longer on your local network, or if you turn off its shared services in the Sharing pane.

  • How can I change the name of a PDF in the bookcase

    How can I change the name of a PDF in the bookcase

    Hi,
    It is possible to edit the dictionary, but not recommended.
    It is recommended to use exp/imp to "rename" a schema
    HTH
    Laurent

  • How can I change the name of a Sub Circuit in Multisim

    How can I change the name of a sub-circuit in MultiSim?  
    For example:
    I have a sub-circuit named "Output Channel 1" and its RefDes is SC1.  How do I change its name to 'Input Channel 1'?

    Hi,
    If what you want to change is the RefDes you can do it by right-clicking the sub-circuit and selecting properties. If what you want to change is the name, you can right-click the sub-circuit in the Design Toolbox.

  • How can i change the name in information of my  i pod

    my friend gave me her i pod , because she bought a the bigger GB i pod.
    but when i turn on the computer which is connected with i pod,  whenever the update comes it keep show me " her name" and give the direction.
    also , i looked in pod information in my i pod. it has still her name.
    ( the information of i pod shows  how many songs have, how many pictures, videos, programes...etc)
    can i change the name?
    my friend says she is not sure how to do it.

    http://support.apple.com/kb/HT3965

  • How can I change column name in ALV table in WebDynpro ABAP?

    Hi Everyone,
    I have created an ALV table in WebDynpro ABAP. I have created a context node and added the required attributes there - for the ALV display.
    Now I want to change one columnn name of the ALV table.... Currently it is showing the description of the data element, which I don't want to show. I cannot create a new DE only for this purpose.
    Please let me know how can I change the name of the column.
    Regards

    Hi,
    This may help you to define your own column text in the ALV Table of webdynpro.
    see the below code.
    Here 'STATUS_ICON' is the column of the the output display of the ALV Table of webdynpro.
    "change the label of the report.
    DATA: lr_weeknum TYPE REF TO cl_salv_wd_column.
    CALL METHOD l_value->if_salv_wd_column_settings~get_column
    EXPORTING
    id = 'STATUS_ICON'
    RECEIVING
    value = lr_weeknum.
    SET THE LABEL OF THE COLUMN
    DATA: hr_weeknum TYPE REF TO cl_salv_wd_column_header.
    CALL METHOD lr_weeknum->get_header
    RECEIVING
    value = hr_weeknum.
    CALL METHOD lr_weeknum->set_resizable
    EXPORTING
    value = abap_false.
    hr_weeknum->set_prop_ddic_binding_field(
    property = if_salv_wd_c_ddic_binding=>bind_prop_text
    value = if_salv_wd_c_ddic_binding=>ddic_bind_none ).
    set the text of the column
    CALL METHOD hr_weeknum->set_text
    EXPORTING
    value = 'C Form'.
    regarads,
    balu

  • Apple TV sorts my photos only in ascending order, how can I change so the most recent EVENTS appear first?

    Apple TV sorts my photos only in ascending order, how can I change so the most recent EVENTS appear first?

    I'm looking for an answer to this, too, since I have thousands of Events, and so scrolling down to the bottom every time I want to show my newest photos makes it almost unusable.

  • How can I change the name of my Mac from old company to my new one, How can I change the name of my Mac from old company to my new one

    How can I change the name of my Mac.  I am using it with a different company now and told want the old company name showing up on emails etc.

    Thanks.  When I rep;y to an email I get this
    SOS Medical <[email protected]>
    I would like to replace the SOS Medical with my company name

  • How can i change the name of my wifi connection on my Airport express?

    The name of my wifi is Réseau de Francois with an accent on the letter E.
    Now, i have many conflict with other electronic components because they do not accept french accent.
    How can if change the name to reseau de francois without an accent on the letter E on my airport express 4th or 5th generation
    thanks

    airport utility in the utilities folder.

  • Can't change group names.

    Anyone know why I can't change the names of my calendar groups? I right click > get info on the group and change the name from "group" to my desired name, and it just changes back to "group".

    Greetings,
    Anyone know why I can't change the names of my calendar groups?
    A bad cache or bad calendar database would be my first guess.
    Here are the steps I would try:
    Remove the following to the trash and restart your computer:
    Home > Library > Caches
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache)
    Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
    __NOTE: Removing these files will remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
    Once the computer is back up and running open iCal and test.
    Hope that helps.

Maybe you are looking for