Can't change incomming mailbox type from POP3 to I...
On my E71, I configured e-mail for my ISP in Messaging. The configuration was straight forward, and it worked.
The ISP now supports IMAP. If I try and change the incomming mail connection mailbox type from POP3 to IMAP, I get an error "Unable to edit mailbox type once selected. Define new mailbox".
So I completely delete the ISP mail entry from Messaging, and then tried to re-create it. When I do this, it automatically fills in the information for me (it remembers the name of the POP server, credentials, etc.) if I use the same e-mail address.
How do I clear this saved information completely so that I can set up the mail? I don't want to have to blow everything away.
Thanks,
Robert
Hi I have same problem... I thought I would be clever and use an invalid service provider and it did fire up manual entry so I added IMAP configuration... fine. BUT when it connected it still went to a POP account!
Looks like this it not being "remembered" but the wizard simply thinks it knows best and uses its own config!!!
You CAN use Nokia messaging (push email) but for me its pointless and means you have to inboxes on the go for the same account
Looks like the wizard needs updating...
BTW disabled PO3 at the service provider also.. does not help
Similar Messages
-
hey i have a iphone 4s 64gb but and using the internet share .. how can i change the nat type from strict to open please help me
You will have to configure that with your router. Type your router's IP address in the search/domain bar and allow port forwarding.
What is requiring you to have an open NAT? That issue is usually for gaming consoles, etc. -
How can we change the message type?
Hello all
We use SRM server 5.5 with classic scenario.
When we create shopping cart, we implemented the Change Badi to assign the purchasing group from R/3 material master.
We implemented the following logic.
If material master in R/3 has no purch. Group, SRM also has no purch. Group. So SRM display the error message You should select the purch. group to determine the purchasing group in basic view.
But, We have the standard error message, when we choose the material code this material code has no purch. Group in R/3 No purchasing groups were found.
Message number is BBP_ATTR050.
Because of this message, we can not progress the process to create shopping cart.
Can we change the message type from Error to Warning Message?
Or, Can we delete this message?
Thank you,
Best regards,
SHYes. You are right.
When user choose the material code, there is no purch. group in 1st Step, but
we want to choose the purch. group in 2nd Step on basic view.
But we have the error message at 1st step. so we can not progress to 2nd Step.
If we use dummy purch. group, user could make the human mistake.
So our customer want to remove purch. group and choose the purchasing group by user.
But i'm not sure if we remove this error message, we got solve this problem..
Pls give me an idea..
Message was edited by:
So Hee Lee -
HOW CAN I CHANGE MY BACKUP FOLDER FROM THE C DRIVE TO ANOTHER????? because my c drive in the windows computer gets filled and i need to back up my ipod to a portable hard disk.. bt i dont know how to do it.. plz help
you can't change the backup folder as far as I know, but you can choose to move backups. The information you need can be found in this article: http://support.apple.com/kb/ht4946
Where iTunes backups are stored on your computer
The folder where your backup data are stored varies depending on the computer's operating system. Make sure the backup folder is included in your periodic data-backup routine.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.
Hope this helps
Regards,
Stijn -
How to change the file type from IMOVIE PROJECT to other types of file
how to change the file type from IMOVIE PROJECT to other types of file??
thank you very much for your help=]I am not sure what you mean, but once you make a project. Then go to the share menu and you can export the project to iDVD, itunes, mobileme, quicktime.
Share export quicktime movie will allow you to export to a variety of codecs. What specific export are you looking to share the movie in? What is the final source that the movie will be displayed? -
I edited my raw image in Photoshop CS6, selected 'Save As', and changed the file type from .psed to .jpg. I also selected 12 and large file when the window popped up, concluding my 'saving as'. My computer does not recognize the file type and won't open them. Can someone help me? Thanks!
When naming files, stick to the letters of the ENGLISH alphabet, numbers and underscores. Do not use illegal characters like apostrophes, commas, asterisks, ampersands, hatch or pound signs, diacritics or accented characters, slashes, etc.
While the period (dot) is not an illegal character per se, your file names should have only one period and that should always be followed by the file type extension.
EDITED typo: se
Message was edited by: station_two -
Trying to change my NAT type from Open to Strict or Moderate.
My NAT type is open but I can't get any games. I told my friend and he said try and change my NAT type from Open to Strict, and that it might help in joining games. I can join CoD4 games, but not MW2 or MW3 games. Can anyone help me? I am playing on XBOX360 and I use wireless internet.
A known issue with Linksys routers is the NAT Type 3 or anything related to dropping of Internet connectivity during play time. Network Address Translation (NAT) is the ability of a router or firewall to translate a public IP address to a private IP address and vice versa. It adds security to the network by keeping the private IP addresses hidden from the outside world.
Here is the link, which will you in resolving the concern: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=2902de6218ed4dc1a4c595595ca1f60a_Resolving_NAT_Typ... -
How can we change the inspection type
Hi
Can any one answer my question.... How can we change the inspection type...I think its not possible through BDC and i am not able to find any custom program for LSMW...Any help?
Thanks,
AparnaHi
For indivial material you can change it from MM02 . ( Select Insp.setup under Quality Management view) and again choose for Create new Inspection Type
For multiple or mass change MM17
Edited by: Sanjay Shah on Feb 19, 2010 10:43 AM -
How can I change screen capture format from .png to .jpg in LION
how can I change screen capture format from .png to .jpg in LION. The "terminal" suggestions of the past don't work? Thanks!
This works for me:
defaults write com.apple.screencapture type XXX
where XXX is one of png, pdf, jpeg-jfif, jpeg 2000, tiff, pict, bmp, gif, psd, sci, or tga. You need to log out and back in for the change to take effect. -
I changed my land/region to Germany, but i want my app store in English language, how can i change it to English from German?
plz help..You cannot.
-
How can I remove a mailbox address from the "From" drop down box in a new e-mail my old e-mail address continue to populate as the sender address
Hello,
Try Mail>Preferences>Accounts icon>Account Information tab>Click on the Outgoing SMTP server drop down, choose edit Server list, highlight the old one & click Remove.
(Such convolution is worthy of Windows® in my estimation) -
Can't change quantity when copy from Sale order for Delivery
Hi all!
Can i use authorization for can't change quantity when copy from Sale order for Delivery.Tien,
Approval will not work when you have mutiple rows of data. You would have to work with SP Transaction Notification
There has been threads before on the forum on the same topics.
Block the Quantity in Sales Delivery
Approval Procedure for chaning quantity in Delivery Document
Suda -
How can I change the itunes store from Swiss to the Italian one on my ipad2 with new software ios6? Thanks
See More Like This to the right of this post!
-
Seen this question before but no answer, how can I change my email address from all caps into a more proper upper-lower style.
You should be able to change your e-mail address from your provider ... then edit it to meet the Apple requirements. Unfortunately you've given us no profile details so we can't tell what device you have.
-
How can i change My app store from USA To Sweden?
How can i change My app store from USA To Sweden?
If you are getting an 'account not in this country' message then try going to the bottom of the Featured tab in the App Store app on your iPad and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select Sweden.
Maybe you are looking for
-
IMessages going to wrong number
iMessages for my partner is showing messages from my daughter who does not have iMessage. They have different phone numbers in contacts and when I send messages to my partner they are going to my daughter. I have deleted and reentered my daughters co
-
Problem with dynamic change a page item value
Hi, I'm trying to dynamically calculated the value of an item based on a simple formula that involves the multiplication of two elements from the same page. To do this, create dynamic action as follows: Event: Change Selection Type: Item(s) Item(s):
-
Hi, I am getting the following error while trying to deploy SAPESS13_0-20000512 on SDM. : Starting Deployment of ess/lwegp Aborted: development component 'ess/lwegp'/'sap.com'/'MAIN_ERP05VAL_C'/'2513885'/'2', grouped by software component 'SAP_ESS'/'
-
Apache Abdera deployment is not working in Weblogc9.1
Hi I am accessing Atom feed from one url(www.example.com.rss.xml). I wrote one servlet and deployed it in weblogic9.1 and Tomcat5.5. Weblogic deployement is not working. but tomcat deployment is working properly. My Code is : public void service(Http
-
Further invastigating ther error mentioned here: https://social.msdn.microsoft.com/Forums/azure/en-US/14afa50f-287d-4158-852a-c9532f9f30eb/test-published-web-service-experiment-error-with-status-code-400?forum=MachineLearning I have made an even sim