Can't change Time Signature before Bar 1

I have a song that I want to have a 2 bar count in of 7/8, then go into 13/16 starting on bar 1. Somehow the count-in time sig got changed to 18/8, and everytime I try clicking before bar 1, and re-setting it to 7/8, it just stays on 18/8. I can't figure out why it won't let me change it. I can change the time sig on bar 1 and every thing after it, but not the count-in. Is there somewhere special I'm supposed set that count-in time signature? Maybe there's something I've hit that locks the count-in time signature?

As a workaround you could just start your 7/8 count on bar 1, and change to 13/16 at bar 3. Then after you get it recorded you can move it back to bar 1. I've tried to do what you're trying on my settup and can confirm that it does not work.

Similar Messages

  • I had to change my Hard Drive, now I want to work on files in iWeb, but can't access Time Machine before yesterday. The dates are there on the right hand side but are greyed out before yesterday when I changed my HD. How do I access anything from before.

    I had to change my Hard Drive, now I want to work on files in iWeb, but can't access Time Machine before yesterday. The dates are there on the right hand side but are greyed out before yesterday when I changed my HD. How do I access anything from before?

    Start with B5/6 in the 1st linked article.
    Time Machine Troubleshooting
    Time Machine Troubleshooting Problems

  • How can I change time machine settings?

    How can I change time machine settings? I only want Time Machine to backup my Home Folders and the items on the desktop. Currently, it's backing up more files which overwhelm my backup drive. How do I get it to back up Home/Desktop ONLY?
    knarfrh60

    Also, see  selecting items to exclude from the backup  here...
    http://support.apple.com/kb/HT1427
    You may also find this Link of interest...
    Time Machine Tutorial

  • Can I change how long before a "time out"?

    Hi,
    I have a hardware firewall that intercepts and scans all incoming POP traffic before letting it pass through.
    We've found an issue with large attachments where Mail times out before the firewall has downloaded and scanned the attachment.
    I can't find a Network or Mail preference to change the length of Mail's time out.
    Anyone know how to do it?
    Thanks!
    - pi
    Dual 2.5   Mac OS X (10.4.6)  

    I took a look at Tweak UI. It has my current hover time as 400ms.
    1) In my PS CS4, the hover time is about 1400 ms (I measured it), so I doubt that CS4 uses the setting displayed in Tweak UI.
    2) I tried changing the hover time in Tweak UI to 100ms. It made no difference in PS.
    I have seen elsewhere on the web that in InDesign the user can set the hover time, implying that delay is inside the PS program also.
    Other ideas?
    By the way, I am on XP SP3.

  • How can I change Time data with List Entry Screen ?

    Hi expert.
    I transfer Time Data (Infotype 2003) via CAT6.
    When I go to transaction PA61 and click List Entry icon.
    Record is display and cannot change data.
    If I wanna change data.I must to click Choose Icon one by one record.
    How can I change data with List Entry Screen?
    ps. If record create via PA61. I can change data with List Entry Screen.
    I can't change with record that create via CAT6.
    Best Regards.

    have u tried to change your time entry through CAT2 tcode, ithink if u have created profile for time entry then it should allow you to change and you can use esc otherwise, its generally the standard profile given by SAP. but is 4 one user
    hope this helps
    guds

  • How can I change color on bookmark bar and tabs?

    I find the bookmark bar and tabs very hard to read.  Small black print on a grey background make no sense.
    How can I change the color of this background, add color to the tabs (similar to Firefox)?
    Am running Mountain Lion 10.8.2

    I find the bookmark bar and tabs very hard to read.  Small black print on a grey background make no sense.
    How can I change the color of this background, add color to the tabs (similar to Firefox)?
    Am running Mountain Lion 10.8.2

  • How can i change the window scroll bar property at runtime...???

    hi all ,
    can i change the Window's (Forms window) "Show horizontal scroll bar property" at runtime, i mean programatically... Is there any property which i can set....??
    Thanx in advance
    Regard's
    Prasad

    There is no property there for your required task.
    Hassan

  • How can I set time signature for my song?

    I wanted to compose a song in Garageband in a time signature 3/4. I couldn't see any setting which lets me set it. Also I wanted to know what all time signatures do Garage Band support ?E.g. 2/3/, 4/4, 6/8,7/8 ...Would really appriciate if someone can help.

    As far as I'm aware GarageBand for iPad only supports 4/4 time, at least in it's present form.
    tt2

  • Blackberry Torch - Can't change time

    I have a BB Torch 9510. The device time is wrong but I can't change it as the Update Time icon in Display and Controls panel, is marked Automatic with a lock symbol. Also the Auto Update Time Zone: shows Prompt with a lock symbol.
    The network time is correct.
    Can anybody help with this please

    Start with a battery pull.  Remove your battery with your phone powered on then replace it.  If that doesn't do the trick, try reloading your OS using BlackBerry Desktop Software.  If neither of those works, I'm stumped.
    Keep us up to date on your progress. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • Can I change depth of tab bar. Coulourful tabs now deeper.

    I have just upgraded to Firefox 6 from Firefox 3. At installation it asked if I wanted to upgrade the Colourful Tabs extension, which I did. I now find that all the toolbars are a lot smaller than before and the Colourful Tabs are deeper than the tab bar. This means that a line of the last colour extends the width of the screen. I have found how to increae the text size of the toolbars but it doesn't sem to affect the tab bar. Is there any way I can change the depth to its original, please?

    No, I'm not, but I think I have jumped the gun, I'm afraid. Searching a bit more I have found other people complaining about this line. It seems to be a new "improvement" by the Colourful Tabs developers and whatever depth the tab bar is, the line will be under it. Presumably the older version is not compatible with Firefox 6 but that is their problem, not yours. Many thanks for the reply but I think this query of mine can be cleared.

  • Mail message viewer-can I change time zone for "time received" & "time sent" to my local time?

    Does anyone know how to change the time zone MAIL uses to one's local time zone?  I'm talking about Apple's Mail Program that's "on my mac."  It shows all my "times sent" and "times received" in eastern time.  Not a big deal, but since I'm on the west coast, I'd prefer pacific time.  The menu bar at the very top of the screen shows local time, but Mail doesn't reflect that.  I have a desktop iMac, Lion 10.7.3.  Any help will be much appreciated!

    I had the same situation on my current business trip.  Home = SF (Pacific time), current location = Houston (Central time, 2 hours later).  For a message I just sent (and received a copy of) at 6:34 AM local (Houston) time, Mail (v6.6, in Mountain Lion 10.8.5) was displaying Date Received as 4:34 AM.  I can tell 'ya, it's *not* 4:34 AM where I'm sitting
    My practice on any trip to a different time zone is just what Carlo TD described -- use SysPrefs/DateTime to change the TZ to local geographic (and also change Calendar's TZ at upper right in its window, but that's not related to the Mail issue).  But when I did so, Mail didn't repaint its Date Received column.  On a hunch, I quit and re-started Mail.  Problem solved -- all the Date Received values changed to local (Houston) time!
    Now to send Apple a Feedback that Mail doesn't repaint its displayed times when SysPrefs/DateTime changes the TZ...
    [Interestingly, when I just posted this reply, the message in the thread shows something like "4:54 AM".  Perhaps Apple displays all Support threads in Cupertino (Pacific) time...]
    Message was edited by: jciccare

  • Can I change the favorites bookmark bar on the top of the screen to show just the relevant favicons?

    I can't find how.  At the moment it shows titles and no favicons.  This rather small issue keep driving me into the arms of Firefox and Chrome, both of which let me easily show favorites by their favicons. 
    Advantages are that it's easier to see them quickly and they take up less space so that I can fit more in.  So if anyone can help me with how to change the bar, it would be great.

    You can depopulate the last row by moving the apps to a screen. 

  • How to temporarily change time signature within a piece?

    hi folks, i'm new to garage band. one issue i haven't figured out is how to change meter within a piece. i.e, my song is in 3/4, but there is one measure in the middle i want to be in 2/4, then i want to switch back to 3/4. can this be done? thanks, Matthew

    can this be done?
    no

  • Can i change BI Query before loading it to BO using some if than else logic

    Hi guys
    In my requirement I have a BI query which the users want to run in BO now. Now the requirement is that they want to change some values in the BI query after the BI query has run based on some u201Cif than else logicu201D for each row.
    So my question is can BO modify a BI query. Is there some place I can write an abap routine between the BI query and the BO Report.
    Thanks

    Hi Adnan, in CR you can create Formula Fields, and you can include IF THEN ELSE statements there. This won´t modify the BI query, but´ll modify the results you see in CR (I believe this is what you want)
    Here, you have information about formula fields, CR 2008 User Guide in chapter 22
    You can do, something like this:
    IF {Tabla.Campo}=1
    THEN "AAA"
    ELSE "BBB"
    Hope this helps,
    Liliana

  • Can I change the Google search bar on the Mozilla Firefox Start Page to direct searches to google.co.uk, as it currently directs me to google.fr and I do not speak French (even though I live here!).

    I like the Mozilla Firefox Start Page and I do find Google fairly useful (albeit that I have dumped Chrome for Firefox due to Google's constant badgering to sign-up to their social network "circles" etc) - but my gripe is that I am redirected to google.fr NOT google.co.uk (my 1st preference) or google.com (2nd preference). Yes, I am located in France. No, I am not French and most of the information I am looking for is contained on UK or US web pages. I found the same problem with the provided Google search engine in the top right bar, so removed it in favour of Yahoo (which I am not a fan of either!). Any advice would be gratefully received. Thx.

    Many thanks for the prompt reply, ideato.
    One of the reasons I abandoned Chrome in favour of Firefox was due to the "black band of doom" that appears on the top of the Google page - so setting up my homepage to google.co.uk just puts that back in the ugly spotlight.
    I was, though, pleasantly surprised to see a Google search bar on the Mozilla Firefox Start Page (without the black band and Google options that I am just not interested in) but bitterly disappointed that it is Google.fr (due to my ISP being French).
    I shall learn to live with Yahoo (or worse case scenario, Bing!)
    rgds, PG

Maybe you are looking for