Can't change volume

Hi people, I've got an issue with track volume.
I can't change track volume because when I play the track it restores to the original value.
There are no automation on the track.
Thanks a lot.

FranzFromFar wrote:
Maybe is something connected to the plug in I am using (steven slate drum with Kontakt 3) ?
Not likely but ???
FranzFromFar wrote:
The messages you are saying, they are in event list with the notes, velocity, length ecc=
Yes... check all the regions on that track
CCT

Similar Messages

  • Imovie 9 Can't change volume in voiceover clips.

    I can't change the volume in voiceover clips.  I have tried to re-record with new microphone, including internal.  Also, have re-recorded with noise reduction changed at different levels and uncheck voice enhancement.  Nothing works.  Please help!

    Have you tried selecting the Voiceover clip so the yellow border is around it. Then hit the small gear icon at the front of the voiceover to open the inspector. Go to the audio tab of the inspector, and move the volume slider.
    If that does not work, check to see if you have ducking applied to some other clip.

  • Can't change volume on keyboard

    hi!
    i just recently updated my ibook's software (10 dec. 2007) and after restarting, i found that i couldn't use the f4 and f5 buttons to change the volume. i tried going to system preferences but there was nothing there. the only way to change the volume is for me to manually click on the volume button in the menu bar or open up system preferences.
    is there some way to change whatever setting it may be on so that i can control the volume using the keyboard?
    the sound works fine. it's just the volume thing that bothers me.
    to whoever who may reply, thank you!

    try holding down the function key, and then pressing the volume buttons. if that is the problem than you can change the default in system preferences->keyboard and mouse. uncheck the box that says us f1, f2, ... as standard function keys.

  • Can't change volume on macbook pro unibody.

    Hi , i have a weird problem with my mac now. Whenever I try to change the volume, nothing happens, and the same sign shows up when you try to switch on the keyboard lighting in broad sunlight.
    the picture of the sign is below..
    http://qkpic.com/26096
    PLEASE HELP.
    THANKS

    HI,
    That's interesting.
    Try this... go to ~/Library/Preferences and locate this file.
    com.apple.soundpref.plist
    Move that file to the Trash and restart your Mac.
    If that doesn't help,
    Try deleting these files.
    com.apple.audio.DeviceSettings.plist
    com..apple.audio.SystemSettings.plist
    MacintoshHD/Library/Preferences/Audio.
    Move those files to the Trash. Restart your Mac.
    Carolyn

  • Can u change volume on text only

    Is there a way to turn volume down on text only?  I need to turn text down or off at night but leave phone ringer up.  Thank you

    hifi25nl wrote:Alsa configuration is completely messed up with the last kernel...
    The many sound issue topics in this forum all lead to that conclusion.
    Is there an appropriate bug report already?

  • How do you change volume permissions with Solaris Volume Manager?

    (Previously posted in "Talk to the Sysop" - no replies)
    I'm trying to set up Solaris 9 to run Oracle on raw partitions. I have my design nailed down and I have built all the raw partitions I need as soft partitions on top of RAID 1 volumes. All this is built using Solaris Volume Manager (SVM).
    However, all the partitions are still owned by root. Before I can create my Oracle database, I need to change the owner of the Oracle partitions to oracle:oinstall. The only reference I found telling me how to do this was in a Sun Blueprint and it essentially said "You can't change volume permissions directly or permanently using SVM and chown will only remain effective until the next reboot. To make the changes permanent, you must modify /etc/minor_perm". Unfortunately, I can't find an example of how to do this anywhere and the online man pages are not particularly helpful (at least not to me).
    I'd appreciate a quick pointer, either to a good online resource or, even better, a simple example. For background, the volumes Oracle needs to own are:
    /dev/md/rdsk/d101-109
    /dev/md/rdsk/d201-203
    /dev/md/rdsk/d301-303
    /dev/md/rdsk/d401-403
    /dev/md/rdsk/d501-505
    I provide this information because I'd like to assign some, but not all, of the devices under /dev/md/rdsk to the oracle user and I was hoping some smart person out there could illustrate an approach using simle regular expressions, at which I'm horribly poor.
    Thanks in advance,
    Adrian

    Ron, I feel your pain.  I just came from an HTC also and a lot of stuff with this iPhone is bugging the crap out of me.  Who makes a phone where you can't adjust the ringer and alert volumes independently?  Instead, I have to adjust the alert volume when it is active.  C'mon guys.  Get with the program.  You won a bunch of Android users over with the 4S, but you're going to chase us all back when we're done with our contract.  Frustrating.  

  • Networker how to change volume mode to appendable by command line

    I would like to ask how can i change volume mode to appendabel for networker ebs through command line, eg . nsrjb -o nofull -S 2,

    It looks like changes to the audio settings alters the com.apple.audio.SystemSettings.plist file.
    You can see the difference here:
    http://barbatto.com/gu/Picture_2010-01-08_at_1_50_43PM.jpg
    I might be able to use "defaults write" to make the change.

  • I can't change the volume of the background music in my project even if I put it to 0%

    I can't change the volume, I've tried to put it down with Itunes, stop and start again my computer but nothing work... PLEAAAAAASE HELP...

    Solved it, there was a problem of the same music put it twice!

  • I have my iPhone 4s plugged into a dock and the dock connected to an amplifier, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhones volume bar disappears. how can i change the volume?app?

    Hi
    I have my iPhone 4s plugged into a dock and the dock connected to an amplifier with 2 speakers and a bass, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhone´s volume bar disappears and im not allowed to change the volume and its very loud. how can i change the volume? is there an app? any ideas??(my dock doesnt have infrared remote controller )
    TY!!!!

    Kline25 wrote:
    So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
    Apple does not repair devices beyond replacing the screen on some models or a battery replacement.  They replace the ENTIRE device.
    For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device.  Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
    Apple will not touch the device now.  They will know that it was opened elsewhere and that the replacement screen is not original.

  • While playing music on my iphone 5, i am now unable to play, pause, or skip songs while my phone is locked. I can still change the volume and slide the scrub through songs.  This has always worked for me until now. I have not changed any settings

    While playing music on my iphone 5, i am now unable to play, pause, or skip songs while my phone is locked. I can still change the volume and scrub through songs.  This has always worked for me until now. As far as i know, i have not changed any settings.  This is whle my phone is locked both on the slide up toolbar/menu interface and on the normal screen before i slide to unlock.

    I skimmed through this very long post but from what I read, this sounds much more like a coverage issue with your network than a device issue.  I have not seen or heard of this issue before and I do not have this issue personnally and & I use the music app quite frequently while working in the yard.
    The DND feature should not be a factor at all if you're sure it's turned off.  I always recommend restarting your phone by holding down the home button + the lock button for 10-12 seconds until the Apple logo appears.  Once the phone reboots, do a test to see if this has helped to resolve the issue.
    If not, go to Settings > General > Reset > Reset Network Settings.  Then, test it out again.  Post back if neither of these solutions solve your issue.

  • Hi , I cant use the music bar in the control center I can only change the volume but I cant skip tracks or pause the song or play it. anyone knows the solution or the reason please?

    Hi , I cant use the music bar in the control center I can only change the volume but I cant skip tracks or pause the song or play it. anyone knows the solution or the reason please?

    That's normal.
    Use the Touch ID to unlock passcode.
    http://help.apple.com/iphone/7/#/iph672384a0b

  • Can I change the volume of one specific part in a clip/sample?

    Hi!
    The question is: Can I change the volume of one specific part in a clip?
    Im not talking about a specific track, but a specific clip/sample.
    For instance you have a clip/sample with the duration of 4 sec. and you want to adjust the volume of a part that's only 0.2 sec.
    Is this possible?

    Juicyappleman wrote:
    Can I change the volume of one specific part in a clip region?
    yes, use a volume automation curve, search GB's help for "curve"

  • Why i can't change the volume in my headphone or answer incoming call or skip song's

    hello
    i get my new iphone 4-  1 day ago i connect my original headphone but i noticed that i only can listen to the music but
    i can't change the volume or answer incoming call or skip song with doubel click.
    hope you can help me.
    danny

    thank you onicray but.
    when i put my serial number in the apple support of my iphone 4 that my friend buyt for me in hong-kong - i get the massage that i don't have 90 day of free support.
    i buy it - 5/18/11 and now i am in israel.
    i don't know what the reason.
    can somone have any .....halpful .

  • I can't change the volume when I have earphones plugged in.  any ideas?

    I can't change the volume when I have earphones plugged in.  any ideas?

    Hello Pamela,
    What happens when you try to change the volume with the headphones plugged in?  Anything?  Does this happen with every pair of headphones you try?
    Maybe try resetting the Nano.
    http://support.apple.com/kb/ht1320
    B-rock

  • I can't change the volume while in cover flow anymore

    I have a 5th generation Ipod nano. I have tried resetting it. I used to be able to change the volume when 'album covers' came, this does  not happen anymore it just shows a list of the songs playing. I can still change the volume when I play music from my playlists, but some of the music in cover flow is not in my shorter playlists . What should I do?

    Hello Pamela,
    What happens when you try to change the volume with the headphones plugged in?  Anything?  Does this happen with every pair of headphones you try?
    Maybe try resetting the Nano.
    http://support.apple.com/kb/ht1320
    B-rock

Maybe you are looking for

  • How to create a moving text in APEX forms?

    Hi Can anyone help me with the procedure and the code for creating a moving text in APEX. Thanks in advance.

  • "disk insertion" problem

    i bought a cd and listened to it earlier and it worked fine but now when i put it in a message pops up that is labled "disk insertion" and it says: "the disk you inserted was not readable by this computer" and the option are to ignore or eject. but i

  • IPad/iPad 2 VGA Adapter

    I have a VGA Adapter for the iPad and it only works when I plug it into an iPad 2. The iPad one does not ever get found by the projector. The Porjector supports 720p and 1080p. Are there two types of VGA adapters? Did I buy the wrong one? The Firmwar

  • Connecting router to switch

    Hi all, I'm using packet tracer version 6.0.1 and I need to connect a switch to a router. My goal is to setup a very small LAN. So far I have two 2900 switches and a computer. The computer can ping each interface vlan IP of the layer 2 switches. The

  • "Filter/partition key" for full-text searching

    Hi there, We have a challenge whereby we have a table of products by store, each store having say 200,000 products.  Basically, for each store, we want to allow searching by product name.  The best solution for this is to have full-text searching, bu