Can't charge Lumia 920 via usb in car

I can't charge my Lumia 920 via usb in the car. There is nothing wrong with the cable, and I've also tried several other cables. There is nothing wrong with the car either, because it works fine on my boyfriends phone (Samsung Galaxy). It also works on my old HTC Desire. 
And it also works to charge my Lumia 920 via usb on my laptop, so there's nothing wrong with my phone either. 
Any suggestions??

As not a Nokia accessory it could not be recommended in case of warranty issues, but if Lumia 920 running Drive draws more current than 750mA that CR-200 supplies http://www.nokia.com/gb-en/phones/phone/cr-200/specifications/ then use of an iPad car charger in accessory socket delivering 2.1 Amp should manage to net charge device battery whilst it is consuming >1 Amp in Drive mode.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • Can I not sync Calendar via USB anymore?

    I just noticed that my iPad no longer syncs with the Calendar on my laptop. I did a search in the Help menu (which actually worked this time) and it said that you have to sync Calendars in Maverick with iCloud. What??? I don't use iCloud, and don't intend to.
    Is this true? Hooking up the iPad to the computer no longer syncs data through the cable??

    Hello Dub1_303. Welcome to the Apple Discussions!
    Ok so here is what i have to work with, an action tech modem with a usb port, and a airport express connected to it via that usb port. the problem is in the airport express itself. Its not configured yet! How can i configure the AE via usb because this pc running vista doesn't have wifi? Can it be done via usb?
    The AirPort Express Base Station (AX) must be connected to a DSL/Cable modem via Ethernet to function as a wireless router; the AX's USB port is only for connecting to a USB printer.
    It sounds like you are attempting to use the AX as a substitute wireless card for the PC by connecting it to the PC's USB port. Sorry, but that will not work.

  • HT4060 My ipad2 charged very well via USB until I upgraded to system 7.0.4.  Now it displays "not charging: whenever I plug into USB.  Any suggestions?

    My ipad2 charged very well via USB until I upgraded to system 7.0.4.  Now it displays "not charging: whenever I plug into USB.  Any suggestions?

    Charge it with the supplied power brick plugged into the wall.
    Most USB ports don't put out enough power for the iPad so the best way is plugged into the wall.

  • How can I re-install lion via usb drive on my new mba(mid-2011)?

    how can I re-install lion via usb drive on my new mba(mid-2011)?
    I just removed all data from main hd, and my network is not good enough to be able to download the os via recovery hd re-installing way.
    in other words, is there a bootable [mac os x lion dmg] for my mba that I can download?

    If you are looking for a download link for OS X Lion, I do not know of one. However if you really need the operating system you can buy a USB drive with OS X Lion on it, ready to boot. I think they're $69 at Apple's store. What I would do is contact AppleCare via the Express Lane or just call them and tell them your situation and then they will definantly have an answer for you to point you in the right direction. 
    Good luck!

  • Iphone 4 won't play via USB in car after ios7 upgrade

    Music will not play via USB or Bluetooth. I own 2013 Toyota Corolla. When I plug via USB my car audio display lets me select folders and music through browse but when I select a song I get an error on the car audio display that says "read manual or contact dealership for information on how to connect". This did not happen prior to ios 7 update on my iPhone 4. Anyone else experiencing this and is there a solution or setting that I am missing?

    Hi I have a 2012 Volvo V50 with premium audio. USB audio via 4S worked fine until the IOS 7 upgrade. Now i keep getting the "this accessory is not supported message"
    I have read through this forum and the only thing apple suggests is "update your car oudio system"
    This is total BS!  Ever heard of backward compatibility? Get this fixed or Android is next for me! Apples resoponse so far shows absolute arrogance.
    I am not the only one and a simple search shows thousands of people having the same issues. Asked my car dealer already and they have loads of people with the same issues. Only devices with issues are Iphones and Ipods since the IOS 7 upgrade. Reset as suggested does not work.

  • Can I use Lumia 920 charger to charge Lumia 925 ?

    I used tonight my friend Lumia 920 charger (EU ver) to charge my Lumia 925 for a little bit, is this safe for my 925 ?
    Thx.

    Hi, Milas. Welcome to the Nokia Support Discussions. jimmyireland is correct. You may also see this link: http://www.nokia.com/global/products/accessories/?action=accessorysearch&product=1805904 to check the compatible chargers into your phone. 

  • Ovi can't find Nokia N8 via USB connection, but Bl...

    I just bought my Nokia N8-00 a week ago along with my girlfriend who got her phone last Tuesday. We have both the same problem with Ovi Suite 3.0.0.284 is not recognizing the phone is connected to the computer with the USB-cable that came along with the phone.
    The computer discover the phone and add it in explorer with the USB-cable and charging works with no problem. So the cable can't be the source of the problem. It also seems like the phone recognizes that the Ovi Suite is running on the computer. The Bluetooth connection works with Ovi Suite, so I don't think the phones are the problem.
    Remember we have 2 similar phones bought from 2 different big dealers/chains and we have exactly the same problems with the USB-connection in Ovi Suite 3.0.0.284.
    I think this is a software issue with Ovi Suite. Have anybody tried a earlier version with Nokia N8 without this problem? The N8 model is rather new so maybe a earlier version of Ovi suite don't support N8...I don't know...
    Will be grateful for any response to this issue :-I

    Hi,
    I have the same problem running Vista and Ovi ver. 3.0.0.290. I ran through your steps but no change. It's a brand new N8 and the phone will not show as a New Device via the USB connection. Although configured to start when connecting the phone via USB, Ovi will not start so I assume the connection is not established between Ovi and the phone. My laptop sees the phone just fine and files can be transfered vie Explorer. Any other ideas? Much appreciated. 
    Thank you in advance!
    Screenshot attached.
    Attachments:
    OviUSB Connection Problem.jpg ‏31 KB

  • Charging lumia 920

    which charger is better for nokia Lumia 920, wireless or wired and why??

    im my experience, it really doesnt matter which one as they are the same speed for me.
    but for convenience, i prefer the wireless pad. so much so that i installed one in my audi to use while i drive under the console!

  • Lumia 920 micro usb -- vga ?

    Hi,
    I wonder if it is possible to use a Lumia 920 and a projector with a "micro usb to vga" cable?
    Thanks in advance!

    Have a few coming up so need to make a decision on what I want soon. Not much to choose from at the moment. Don't know about the free bit. They will be on contract which is effectively paying on instalments. So might as well get a selection of phones I want to try.  

  • Can't import RAW Files via usb

    I bought a canon eos 5D a couple of days ago. I don't know why but I can't import the raw files from the usb connection. When I press the eos 5D button from the import dialogue, the lightroom says "no files were found to import". Everything works perfect with an external reader but I do want to import them via usb. I don't want to be removing the card too often.
    Can anybody help me or guide me to a possible solution?. Zoombrowser works fine and imports without problem. I love lightroom and don't understand why I can't import via usb. It's strange but it doesn't happen with jpg files. With those, I got no problem.
    thanks in advance

    It is a "by design" issue of the Canon driver software. There is nothing <br />wrong with your hardware.<br /><br />To get the RAW files you need a card reader.<br /><br /><br /><br /><[email protected]> wrote in message <br />news:[email protected]..<br />> Maybe you are right, but I want to know that everything works perfect with <br />> my camera. Nevermind if I'm going to use it or not. It is two days old and <br />> I see that not everything is working properly.<br />><br />> thanks so much for your help, Lee.

  • How not to charge the iphone via USB

    I was wondering if it is possible not the charge the iphone while it is plugged to the USB port of my laptop. I am just asking that as sometimes I just want to add new songs/apps without actually charging my iphone via the USB port as I prefer to do it once the battery is at 10% .
    Many thanks in advance for your help/advices.
    Regards
    Alberto

    In a word, no.
    There is no harm with charging a lithium based battery more frequently and when at any battery level and without having to charge the battery to 100% when doing so.

  • Can't connect to printer via usb print server

    So I've tried to connect to an EPSON stylus printer from my iMac via a print server with no success.
    Here's some info to help focus the questions/help:
    iMac running Mavericks, Epson SP R200 printer, Belkin Play router, Toshiba Satellite laptop, Level1 USB print server
    Win8.1 laptop prints via print server just fineso IP, port, firewall issues on router/print server side are ruled out.
    I have the fire wall off on the iMac
    I've quadruple checked IP and subnet numbers of iMac to rest of network, and they all jive.
    I can pull up the config page of the print server via Safari on the iMacso connectivity is there
    I previously had the printer attached directly to the iMac, and successfully printed.
    I've tried to add the printer via IP > LPD method AND Advanced > Windows printer via spoolss
    I can get as far as adding the printer, but as soon as I attempt to print a test page the printer has a "filter" error, or some "color" error, the job just goes into nothingness, or the job just sits there and the que is paused.
    This is very frustrating to put it nicely.
    -Vince

    What driver are you using? - Don't know if you remember, but you had to be using Gutenprint, because Epson's driver for USB-only printers, only works via USB.
    http://gimp-print.sourceforge.net/MacOSX.php

  • Help:LINK can't connect to q10 via usb

    new q10 connect to computer,the q10 can be  charged  and see the extension of the SD card on computer,but when open blackberry  link,it can't find the device of q10.i have change 3 pc,It is all the same situation.
    if pc and q10 in wifi ,blackberry link can find q10,and sync the data.
    How to explain the situation,will be the USB interface problem?

    it is this situation,do you know the reason?

  • Why can't my ipod connect via usb?

    I have a 5th generation that won't connect via usb to anything.
    only charges via firewire.
    any ideas?

    iOS: Device not recognized in iTunes for Windows
    or
    iOS: Device not recognized in iTunes for Mac OS X

  • Can I transfer 720p video via USB cable

    Hi Everyone, technology has changed so much since updating to my recent Pro Mac. I want to transfer my current video and pictures from my Nikon CoolPix L120 to FCP. I'm not sure what the best route to take would be. Either a memory Card  or hook my camera directly to the computer via USB cable. The footage I want to trasfer is 720P. Mainly I want to transfer the footage to clear my card to store and clear space to record more footage of family events. Thank You all for your time. Oh yeah can USB handle a trasfer of 720p or will I need a HDMI or component to accomplish this task
    Thanks
    Jeff

    Sure it can do it...all you'll be doing is copying over the contents of the card.  Like you do any other data file.  Make a new folder on your hard drive (separate from your system drive...this will be your ARCHIVE drive), and then drag and drop the ENTIRE CONTENTS of the SD card.  Keep everything intact.  That's all you do...copy.
    BUT THEN...you need to transcode that to ProRes, as FCP will not work with the files as they exist now. It might seem like it will, but it won't.  use Compressor or MPEG STREAMCLIP to convert to ProRes, and put those files on yet ANOTHER drive (media drive) for editing.

Maybe you are looking for

  • Bad CRC error when install WebLogic Server 9.2 on Itanium platform.

    I download the install image according below steps: 1. Go to the BEA download site a http://commerce.bea.com. 2. Click on the link for Bea WebLogic. 3. Click on the link for WebLogic Server 9.2. From the list of OS Platforms, select Novell SUSE Linux

  • Problem in triggering the Supply Function

    Hi Experts, I am developing one web dynpro application to display the records in MARA table. I have created a radio button.Logic is if radio button is selected then displaying of the record should be done. NODE_PARENT consists of   NODE_CHILD ( which

  • Reports Error Message

    Hi, When I click the Reports icon then select a report from our DEV environment, I get this error message from a window that pops up: Error:Some of the required arguments are missing. Please contact your systems administrator. This happens in this en

  • Colour differences when copying

    I work on a Mac and I just updated from Illustrator CS5 to Illustrator CS6 and I'm noticing a weird problem. I have a file that I created in CS5 that when I copy the artwork to a new file in CS6, the colours are totally different. I have checked my p

  • Problem transferring email addresses to IPhone 4

    IPhone 4 new user - can not get Yahoo & Google email addresses transferred to IPhone from Macbook