Can't check email or browse to the domain name, but can telnet in

The mac was infected with MacOS:Flashback-M [Trj] (accourding to avast).  The virus has since been removed, but now there's an issue with email.  Running telnet [domainname] 110 from the terminal works fine.  But checking for emails through mac mail times out.  Also browsing to the web site times out in both FireFox and Safari.  All other web sites load just fine.
Also loading the web site through a proxy(http://anonymouse.org/) site loads part of the time, but times out part of the time.
Could I get some help on this?  I'm thoroughly confused.

Is the device yours and unfettered, or is it a corporate or school-owned device subject to central management? Such devices can have a management profile imposed upon them by the central administrator, which can have such kinds of restrictions. And which do not show up in the Settings.

Similar Messages

  • I accidently click for a full screen view on Firefox and now I can't undo it. My bar with tools, bookmarks, etc. is not visible. As the browser opens, the bar appears but then jumps up where it can't be reached. How do I turn off the full screen?

    I accidently clicked for a full screen view on Firefox and now I can't undo it. My bar with tools, bookmarks, etc. is not visible. As the browser opens, the bar appears but then jumps up where it can't be reached. How do I turn off the full screen without access to view options?

    Co-el, This wasn't possible as there wasn't a navigation bar available. The F11 did the trick though. Thanks for adding to the discussion.

  • I cannot connect to the internet after switching providers.  I've changed the email address associated with the new account but am sure there is something else I need to change.  Can anyone help me?

    I cannot connect to the internet after switching providers.  I've changed the email address associated with the new account but am sure there is something else I need to change.   I have also changed the apple information as well including user name and password.  Can anyone help me?  (This is an ipad question).

    Apple ID: Changing your Apple ID
    http://support.apple.com/kb/ht5621
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    Apple ID: What to do after you change your Apple ID
    http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    iOS: Changing the signed-in iTunes Store Apple ID Account
    http://support.apple.com/kb/ht1311
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • TS3899 On a 5C, how do I delete and trash emails to where they remain deleted? Every time I check emails it gives me the prior day's too even though they've already been dumped. Highly annoying!

    On a 5C, how do I delete and trash emails to where they remain deleted? Every time I check emails it gives me the prior day's too even though they've already been dumped. Highly annoying!

    Settings/Mail,contacts,calendars. Tap on the name of the account. Tap Advanced. Tap Remove after one day.
    Also, do not try to read or delete messages while they are downloading. Wait until they finish and the phone beeps to confirm. If you delete messages before the mail retrieval session finishes they will not be removed from the server.

  • How do i fix my wifi if it connects and the bars are blue but no check sign appears next to the wifi name and does not connect to the internet???

    How do i fix my wifi if it connects and the bars are blue but no check sign appears next to the wifi name and does not connect to the internet???

    Did you already try to reset the iPod by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data.
    If this does not work, try to reset the network settings in Settings/General/Reset. After that you'll have to put in the passwords for all known networks again.
    More troubleshooting can be found here:
    iOS: Troubleshooting Wi-Fi networks and connections

  • I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

    I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
    When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
    Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
    Please help!!

    I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
    I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
    I was afraid of rebooting and possibly losing track even of the ghost.
    I did not try EasyFind - I'll keep that in mind next time.
    Thanks for all the comments.

  • A have new problem that has appeared in my Mac Mail.  When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name.

    A have new problem that has appeared in my Mac Mail.  When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name.  I have gone to the window pop-down to 'previous recipients' and deleted that addressee as well as all the email addresses it is assigning to that name.  I have also deleted the account entirely from my address book.  I have have run repair permissions and also full defrag in iDefrag.  Still the problem persists.  Any suggestions?

    Hello CarolineLongEaton,
    I noticed you posted this problem quite a while ago and wondered if you managed to have it fixed in an alternative way then posting here. It is too bad no one has posted a solution here. I have a similar problem and if you have had yours solved since this occurance how you accomplished it may help me with mine. I am interested to know what you have done about yours.
    If you are interested in comparing the problems to see if your solution (if you have found one) might help me also then here is the link to the discussion.
    https://discussions.apple.com/thread/6116927
    If your problem has not been solved then I will comment here again if/when my issue is resolved as it may help you too. My hope here is that we may help each other. To quote you "all ideas gratefuly recieved". I hope your problem was resolved, ernestly for your sake and selfishly for mine also. I wish you and yours a great day!
    dofromon

  • How can i edit the domain name ?

    Hello,
    I tried to register my first website through business catalyst.The domain name i took was www.wildixel.com . But, when i am trying to open the website it open other website with the same name. I guess it was already taken. Now i want to edit the domain name. Please let me know how can i.
    Thanks

    Hi there,
    Could you please explain more what you are trying to do and have done?
    You can not purchase a domain name through Business Catalyst so you would have not obtained a domain you listed there. You have to by it from a domain registra.
    If you have just entered a domain into the domain manager of your website but have not purchased the domain, this will not work. You have to obtain the domain first.
    If you have got your domain, have you gone into the domain settings of BC and added the domain in? Have you gone to the domain registra and changed either the A-record or the NS records to point to your BC site?

  • I can't join a network, because everytime I type in the password, join greys out.  It has a lock sign next to the network name, but I'm not sure how to unlock it.

    I can't join a network, because everytime I type in the password, "join" turns grey.  There's a lock sign next to the network name, but I'm not sure how to unlock it.  Can you help me??

    The way you "unlock" it is by typing in the correct password. The lock indicates a private network that requires a password. Are you sure you have the correct password? Is this your own home network?
    Why don't you reboot your iPad and try to log in again. Hold down on the sleep button until the Apple logo appears on the screen, let go of the button and the iPad will shut off. Turn back on by pressing the sleep button again until the Apple logo appears and let go of the button. See if the iPad will accept your password.
    If that doesn't work, you could try tapping the blue arrow next to the network name and then tap Forget This Network. Restart your iPad as described above. Then go back to settings, tap WiFi, select the network and enter the password again and see if it works.

  • I have ran the diagnostics test on iTunes and iPod.  The diagnostic says there is an iPod, it is identified with the correct name, but it says there is no sync ability.  What can I do?  iPod nano 3rd generation.  All updates are current.

    I have ran the diagnostics test on iTunes and iPod.  The diagnostic says there is an iPod, it is identified with the correct name, but it says there is no sync ability.  What can I do?  iPod nano 3rd generation.  All updates are current. 
    It had not been used for awhile and most of the songs that were on there were gone when I turned it on.  I was trying to sync to update the library.

    sklshrnk wrote:
    It had not been used for awhile
    Weeks, months, years?  It's possible your battery is dying.  Take the iPod Nano to an Apple store or an AASP.  Whichever is more convenient for you. 
    Syncing Music to iPod 

  • I have a problem when syncing my iphoto library to my iphone 3gs. There apprears to be more than 40  events with the same names but containing only 2-5 pics in my itunes sidebar when in fact I only have around 10 events on iphoto. How do I fix this?

    This has never happened before, and I've tried deleting all photos off my phone then syncing them all instead of specific events and nothing. I have around 10 events in my iphoto library but around 3,500 pictures. I have more than enough space on my phone but I only like to sync certain events, so when I go sync them I notice there are over 40 events listed, and all of them have the same name but it seems as though each "event" has like 2 photos.. On my phone all the different events come up as well. This is super annoying, does anyone know how to fix this ?

    I have the exact same problem!
    I have about 25 albums and a total of 8,100 pictures. When i go to iTunes -> "My iphone" -> Pictures, and then check the box to sync choses events the list of events is messed up. The same events shows up like 3-4 times and the events only have a couple of pictures in them.
    Does anyone know what can be causing this? Or what can be done to fix it?
    Using iPhone 4, latest IOS and latest V of Snow Lep..

  • Nodemanager doesn't display the domain name

    Hi
    Iam new to wlst scripting and concepts of nodemanager. My aim is to start the server using nodemanager through wlst.
    First i invoked the wlst.sh shell script
    then i started the nodemanager by using startNodeManager command
    Then i tried to connect to nodemanager through nmconnect
    Now if i type the command nm() it displays the following
    Currently connected to Node Manager to monitor the domain {0}.
    It doesn't display my domain name , instead displays {0}. I guess because of the domain name not set properly , i am not able to view the status of the admin server. For this iam using the command nmserverstatus("AdminServer") , it displays the status as UNKNOWN.
    Can you please let me know what is that iam missing.

    To ask Apple to fix this, you need to repost it at
    http://www.apple.com/feedback
    If I remember right, display of such domains in the original script may depend on whether the domain officials have policies in place to safeguard against potential confusion between names that look the same in cyrillic and latin.  But it could also be a simple oversight.
    Each browser may be different:  Do Firefox and Chrome behave the same?

  • How to change the Domain name of portal

    Hi All,
    We've developed an application using the WDA(Web Dynpro for ABAP) on BI 7.0 and in this we are displaying the BI reports as well. This whole appliaction works fine when we run this on the BI portal 7.0. But when we run it from the Enterprise Portal 6.0
    the reports don't show up and it goes in the never ending loop. After research we found that this is happening because the
    Domain names of the BI portal and the Enterprise Portal are not the same. And as per one of the SAP note the prerequisite for the WDA application to run on the EP portal is to have the same domain name on both the portals.
    Now we are planning to change the domain name on the BI portal.
    Does anyone let me know how and where we need to go and change this Domain name ?
    Thanks in advance for your help.
    Regards,
    Alok Varma

    Hi,
    first step is to configure your DNS server. There has to be a name resolution for portal.domain.tld to your portal server's IP address.
    Right now I don't have access to Visual Administrator, so I cannot check if there is any domain specific configation to be done on the server side.
    As for the SSO between your Portal and WDA: you'll have to recreate the portal server certificates and import it into the ABAP system.
    The Logon Ticket MYSAPSSO2 has to be issued to the new domain by the portal! If not, your browser won't sent this cookie to the BI system and no SSO data will be transmitted to the BI system.
    br,
    Tobias

  • Doubt abt validating the domain name

    Hi,
    I have a doubt in authenticating the domain name.
    Before the sendmessage can i verify whether the domain name's correct or not.
    for eg:[email protected] to verify whether test.com is valid or not.
    I'm using javax.mail to send mails in my application.
    I'm not getting how to do this and we dont have any DNS name.
    how do i authenticate this..plez help me in this.
    Thanx&Regards,
    Priya

    Before the sendmessage can i verify whether the domain
    name's correct or not.Not really, no.

  • Income email set up using company domain name

    Ive just jumped ship from PC to Mac (lion) and im trying to set up my email account. My company has its own domain name which appears to be the problem and although outgoing mail is working ok (o2 broadband) i just cant configure incoming. Ive used the same Pop3 and SMPT info as on the PC but it just dosnt like it. This must be a common problem but i dont seem to be able to find any threads that explain, im also surprised that Apple didnt explain when i purchased the unit as they had my email address which clearly shows the domain name?
    So i would be obliged to know if anyone has a solution?
    Many thanks
    Kind regards
    Lusso

    I had the same problem and discovered that I had to migrate to the new ATT email service powered by Yahoo.  I had received notices each time I went into by bellsouth email account that I needed to migrate by following a procedure provided and was asked whether I wanted to do that "now" or "later".  I always chose "later".  Then Saturday, when I got my Pre, I had the same problems you had and even wnet back to the Sprint store and the Palm rep could not figure it out. 
    So, I returned home and decided to migrate to the new ATT email platform.  After that, I used the Pre email setup routine and had no problem.  I now receive by bellsouth email on the Pre and can send replies to email I receive.  I have not tried to send new email directly from my Pre yet. 

Maybe you are looking for

  • Display won't sleep and screen saver won't sart

    I upgraded to the new OS and the display won't sleep and screen saver won't come on. Help please.

  • VBox.setAlignment has no effect?

    I want to align a bunch of nodes along their right edge. I tried putting them in a VBox and doing vbox.setAlignment(Pos.TOP_RIGHT); but it seems no matter what I use for the alignment they are always aligned to the left edge. I'm using build 42. Is t

  • Oc4j, jdeveloper and apache, port conflicts ?

    Hi all, I am currently in the process of deploying my first EJB on Oracle 9i AS. I have successfully installed oc4j.zip and set the login credentials. I am however, unable to connect to the index page of the OC4J server from any computer besides the

  • Facebook Keeps Notifying Me Of Friends Check In's...

    Hi All, Hoping someone can help... For some reason when friends check into facebook using places my ipod makes the facebook notification sound and then if I unlock my ipod touch screen it says facebook - friend NAME checked in at PLACE. I have remove

  • Any help appreicated on trial download of illustrator cs6

    I SUCCESSFULLY DOWNLOADED ILLUSTRATOR BUT AM UNABLE TO LAUNCH. MESSAGE STATES I NEED A JAVA RUNTIME BUT THAT I AM NOT CONNECTED TO THE INTERNET. I AM CONNECTED. I AM USING MAC OS 7.3. I WOULD LIKE TO TRY OUT THIS PRODUCT, BUT CANT GET IN! PLEASE HELP