Can't choose contact sync in settings for Facebook

Hi,
After moving to a new Mac, Facebook connaction didn't work properly, so I set up again. The problem is, that I just can't choose to sync Facebook contacts with Mac's contacts. I click on it, and the arrow disappears. No error message whatsoever. Here is a short video about it:
https://www.dropbox.com/s/868ppw3nhm0f9u8/Yosemite_Facebook_problem.mov?dl=0

Hello Dmitry,
I hope you have implemented the master note for CHARM with repect to your Solman SP Level. Additionally please refer to the note  0001602258 Create RfC - no values in project input help. This might help you.
In our case i had the same issue even after implementing the note it did not work. Eventually SAP fixed the broken number range and removed the old project flags from the tables responsible.
Best luck ..please try with the note first.
Thank You.
Rupesh

Similar Messages

  • I can go to every other website except for facebook even if i use other browsers all i can see is 404 Not found or HTTP 500 Error since yesterday I tried reinstalling clearing history and cookies enabling them make sure that my firewall permits me to acce

    I can go to every other website except for facebook. I try every other browser in my computer but the only thing I can see is HTTP 500 error and 404 Not Found. I tried clearing cache history and cookies, enabling cookies, checking my modem, make sure my firewall permits me to access this web and even pt 's' in front of 'http' but it still dosent work. I can go to facebook with my dad's laptop and my handphone but not with this computer, why?
    == URL of affected sites ==
    http://www.facebook.com

    Problem Resolved!
              I found out that I had 'http' instead of 'httpd' in the statement where I
              registered my servlet, SqlServlet.
              Now, I am having difficulty with hot deployment. The server is returning
              error 404.
              

  • In my IPAD or IPhone 4S I can only see the first 12 photos for facebook albums

    In my IPAD or IPhone 4S I can only see the first 12 photos for facebook albums

    Hello there, bagsb29.
    The following Knowledge Base article offers up some great information on troubleshooting apps downloaded to your iOS device that aren't working as expected:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/TS1702
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I have push off and all the push settings for facebook off but I still get notifications, why?

    I have push off and all the push settings for facebook off but I still get notifications, why?

    Did you put Facebook out of the notification on the phone's settings ? You have to make the modifications also on the facebook's site

  • How can I export the saved preset settings for Batch Renaming on Bridge?

    I've developed a few Batch Renaming presets and want to share them with my team, but couldn't find where they are saved.

    but couldn't find where they are saved.
    I can only provide you with the path for a Mac but Windows should be something similar
    User library (By default hidden per OSX7, use menu go with option to reveal)/ Application Support / Adobe / Bridge CSxx / Batch Rename Settings. Inhere are the saved files with the extension '.setting'

  • Have ios7.Can I undue contact sync from facebook and linkedin?

    I have the iphone 4s, running iOS 7.03. Is there aneasy way to undue a contact sync from Facebook and Linkedin? Thank you.

    Yes. Try this.
    Open the Facebook app and go to your Friends section.
    At the top right, tap the arrow button then select "sync contacts".
    This will upload iphone contacts to facebook and download facebook contacts on to the iphone.
    Here is a link for more info (although the facebook app in that link is an older version)
    http://www.maciverse.com/sync-your-facebook-friends-with-iphone-contacts.html

  • How can I link contacts (e.g.. Facebook and Exchange) in Mountain Lions Contact App

    After I installed ML and setted everthing up, everthing is fine. On my iPhone and iPad as well as on the Mac the contacts are there. Alle contacts with same Name / Email are linked. But some, where name is not 100% matching are not. On iPhone and iPad i can link them manually but this linking is not synced between the devices. Well anyway, this is not a problem. Then i tried to link the respective contacts in Contact App on the Mac. There seems to be no option to do that. How can I link contacts on the Mac?
    Thx
    Jan

    Do you think it's acceptable if I simply put the contact email address without a link so users can just look at it and then copy and paste into their own web client/browser?
    You have to be a masochist to consciously publish an email address on a site anymore.   In a matter of weeks or months, you will get hit with so much spam mail, you won't want to open your inbox.
    Use a form-to-email-processing script in PHP, ASP or whatever programming language your server supports.  Find one that hides your email address and has good spam prevention built-in.  It may take you an entire day to set-up your first contact form but it's worth it.  Otherwise, use a service. See links below:
    Form-mailer.php script from DB Masters
    http://dbmasters.net/index.php?id=4
    Forms to Go from Bebosoft (script generating software)
    http://www.bebosoft.com/products/formstogo/overview/
    Wufoo.com (on-line form service)
    http://wufoo.com/
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb
    http://alt-web-design.blogspot.com/

  • I can't turn off my cellular data for facebook

    I tried to turn off my cellular data for Facebook, but it is on when I check it immediately...
    I tried...
    Settings >> Cellular >> Faceboook
    and
    Settings >> Facebook >> Settings >> User Cellular Data
    both doesn't work. I also tried Settings >> General >> Reset >> Reset Network Settings. then try again. But it doesn't work.
    Any idea or solution?
    It is the same for the F#$% Facebook Messanger

    go to setting---->general----->accesories----->turn of accesotive touch and then

  • Can iOS 5+ support contact sync over ActiveSync for 15,000 contacts without freezing

    I purchased an iPad 1 a year or so ago and setup my company email and contacts using Microsoft ActiveSync. We have 17,000+ contacts in our company database that are synced to all devices. We may need any one contact at any time out in the field and need it at the ready. That many contacts froze the iPad 1. I do not remember what version of iOS it was running. We are now looking into using iPhone 4S and iPad 3rd gen in our business and I want to know if I should expect the same with the devices totally freezing up when I try to setup activesync with that many contacts.

    You will need to look in Apple's developer documentation
    http://developer.apple.com/
    or perhaps there is or will be an in depth review at Ars Technica
    http://arstechnica.com/apple/

  • Can I choose Contact group for iPhone?

    I don't need all the Contact groups on my MacBook to be on my iPhone. Is there a way to choose only specific groups?
    I have so many contacts and my iPhone seems to be responding slowly. Too much stuff?

    not natively.  Search the app store.  There are many apps that do this

  • Clean install - can I save my old internet settings for wireless router

    I am upgrading to Leopard with a clean install. My only concern is that my sister got my computer hooked up to our wireless router ages ago and I'm afriad I won't be able to get back on wireless afterwards.
    Is there a way to backup this information, these settings, to my external drive to reinstall once I've done the reinstall?
    Thanks!

    sarah steegar wrote:
    uhhh, I think the 2nd thing you said...
    We bought a wireless router to work with our pre-existing internet service. She had to put in some disk and go to some website with a bunch of numbers as an "address" and type in some stuff. Something about WEP keys and such (that I obviously don't understand enough to remember clearly). It was quite a hassle is mostly what I remember.
    Yes, it can be. The web page is probably the configuration page for the router. The disk suggests she might have had to install some software to get it set up. You would need to reinstall that, I think. It also sounds as if she configured the router from your machine. Although the router is now configured, you don't want to lose the ability to re-configure it if necessary.
    I'm going to suggest that you write down as much configuration information as you can.
    Are you in a position to make a bootable backup - to clone your current system? You need an external drive big enough to house your system and which is suitable for use as a boot volume. I would strongly recommend this before upgrading in any case. If anything goes wrong, you can always boot from your backup until you sort the problem out. I don't know what sort of backups you keep - you mentioned an external drive but I gather you are backing up just selected files to that.
    What kind of router do you have? Are any other computers sharing the connexion to the internet?
    - cfr

  • Can't choose my country when paying for Creative Cloud

    I live in Spain so I should be paying in euros but every time I try to pay it automatically chooses Australian dollars and Adobe is not accepting my purchase.
    What can I do?

    Hi Delial,
    The email you use here on the forums is associated with Australia for the country which is probably the cause. You'll probably need to change the email address for your current Adobe ID (even though its correct) to something else in order to free it up. Then create a new Adobe ID with the former email and correct address and country.
    Hope that helps,
    - Dave

  • Cant fiquer out how to choose the correct sequence settings for HD

    I edit for over 50 shooters whom I never have contact with. I get every possible file format & never the parameters they shot in. In FCP all I had to do was drag the footage to an empty sequence & it would automatically adjust it to the exact sequence parameters. In PP I always get either a yellow bar or red bar on everything I try to edit and the footage in the program window is always very strobey whether I set it for field or frame display. (All DV footage I have no issue with, it's only HD files)
    In Premiere CS5 I am finding it frustrating. Is there a program that cam read all the important codec info so at least I can dig for a sutible sequence? I tryed gspot but it doesn't tell much & PP CS5 clip properties doesn't seem to be of much help either.
    Am I missing something in my approach?

    Footage like DVCPROHD (P2 MXF) and XDCAM EX show no bar in sequences with matching parameters; they'll show yellow lines (hardware MPE) and red lines (software MPE) in non-matching sequences. Footage like DSLR H.264 from a Canon T2i, for example, show yellow bars, even in matching sequences. So, you can't really rely on the yellow bar/red bar as an indicator of footage matching the sequence. Typically, the "drag to New Item" action will generate a sequence that matches your footage, though it might not always use the editing mode that matches the footage (e.g. P2 with P2 media).
    Ultimately, knowing a little bit about your footage helps. I like using MediaInfo much more than GSpot for video file snooping; it much more modern, gives more helpful information (in my opinion), and integrates nicely with your operating system (e.g. tool tip popups, right-click "MediaInfo" items).

  • Can Users have their unique Form Settings for the List of Items (Item Search)?

    When any user add and remove columns for the List of Items (Item Search) via Form Settings, these changes are automatically updated for all SAP users.
    Is there any way we that each user have their own unique List of Items form settings?
    This is important as users for different departments will be need to see different information as they are searching for Item Master records.

    Hi Ron,
    This is not Possible.
    Form Setting of Item Master Data will apply for all Users.
    For all Users different Form Settings not Possible but you can guide your users to see while Searching Master Data.
    Hope this helps
    Regards::::
    Atul Chakraborty

  • Can you choose unlimited messaging package anymore for new contracts?

    hi, my verizon contract is up next month so i was planning which phone i want next... i was wondering if it's possible to do this though. right now i'm just on an unlimited text plan, no minutes. is there an option to do that still? i tried picking out a new phone to see but all they have is the regular minutes/text+minutes plans.
    if they don't have it i might go with family members' plans on att or sprint since it's a waste for me, i never use minutes. thanks if you know the answer

    Hello mochaaa,
    Thank you spottedcatfish for the link on the messaging only options. May I ask, mochaaa. Are you looking just for messaging or are you looking for a minute package as well? If you want minutes, I have attached a link to our minutes & text rates.
    http://www.verizonwireless.com/b2c/store/controller?sortOption=priceSort&item=planFirst&action=viewPlanList&catId=323&sel=ind&typeId=1
    There is a drop down menu that you can use to change from individual plans to family share plans & more.
    Hope this helps...

Maybe you are looking for