Can't click on photo when slider set to single picture

Prior to Iphoto 08, when you set the slider to show a single picture (all the way to the right), you could double click on it to edit, drag it to a folder, etc. With iphoto 08, you cannot do this. It is rather annoying to use the large view to determine which photo I want, then move the slider to a smaller photo size (where you can see multiple pics) and then click on it or drag it. (as an example, if you click on a photo in the tiled mode, it brings up the picture info in the bar on the left, if you do it when that is the only photo on the screen, the info will either show the event or photo library info.
Thanks in advance for any help.
Jeff

this is a known issue in iPhoto '08 and has been discussed many times at length on this forum - there is no know workaround except to slide the slide to the left and display multiple photos
report to Apple - iPhoto menu ==> Provide Apple feedback
LN

Similar Messages

  • When I upgraded iOS 7.1 software when a call comes in I can not click the "listen" when the screen is in lock mode

    when I upgraded iOS 7.1 software when a call comes in I can not click the "listen" when the screen is in lock mode

    User troubleshooting steps as outlined in the manual include restart, reset, restore, restore as new. Have you tried any of these? Restart involves powering off your phone and powering back on. Reset involves the following procedure:
    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • HT4528 can not see my photos when i take a picture?

    Hi can anyone tell me after two attempts at restoring my phone to factory settings that it can't show my photos when i use the camera?

    Hello Breede,
    After reviewing your post, it sounds like you cannot receive MMS messages. I would recommend that you read this article, it may be able to help the issue.
    If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • When I set a panorama picture as my wallpaper, the live scrolling is not working. Anyone else having this problem?

    When I set a panorama picture as my wallpaper in my iPhone 5, the live scrolling is not working. Anyone else having this problem?
    Please help me to solve this

    Everyone is having the "problem".
    That beta feature is not in the final release of iOS 7.

  • HT4236 I can't see any photos when ipad is plugged into computer.

    I can't see any photos in itunes when ipad is plugged into computer.
    Everything else shows up.

    I have a similar problem Win 8 iCloud 3. Shared photostreams sync ok and my photostream syncs on other devices. Interesting enough, when I access photostream through the "my computer" option on Apple TV I see a whack of pictures that don't appear on any of my IOS or Windows Photostreams.

  • Why can't I crop photos, when editing?

    I use PE 7.0.  Recently I am unable to crop photos when editing.   The photo  disappears, and I get a screen that asks me to reset.  When I do that, I have lost all the other things I did in editing.   It is getting frustrating!  

    Try resetting Editor Preferences
    1. Close Elements.
    2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
    3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
    Do reply back if you still face the issue.

  • Can't print a photo multiple times on a single page

    I just installed iLife 8 and am trying to print one 3X5 photo multiple times on a single page. When I consulted the help menu in iPhoto, I found what I thought was the answer. When I followed the instructions, I hit a snag because I don't have the Photos Per Page pop-up menu it references. Any ideas on how I can do this to save paper?
    Here's what the help menu said:
    Printing one photo multiple times on a single page
    If you have a favorite photo you want to share with many people, you can print multiple copies of that photo on a single page.
    To print one photo multiple times on a single page
    Select the photo you want to print.
    Click the Print button.
    Select the paper size (such as letter-size or legal-size).
    Select the print size (such as 2 x 3 or 4 x 6).
    If you want to make the photo a custom size, select Custom.
    Click the Customize button.
    Click the Settings button.
    Select “Multiple of the same photo per page” from the Photos Per Page pop-up menu.
    iPhoto will zoom and crop the photo to fit the space available. To make a photo appear full-frame, Control-click the photo and choose “Fit Photo to Frame Size” from the menu that appears.
    Click OK.
    Click Print.

    Well don't I feel stupid! I just installed iLife '08 and assumed that it would tell me right away if I needed any updates. I found and installed the needed updates (7.1.1), I got the right settings drop down menu to print multiples on one page. Thanks for your help

  • How can I remove print margins when manually setting them to zero doesn't work?

    I'm trying to print a web page that I've created with a custom paper size of 4.5x10.25 inches. I want the page to be printed right to the edge of the paper, with no margins at all.
    I've been reading for a few days and the best thing I can find is to use Mac's Page Setup dialog to create a custom paper size and custom margins, which I've done and set to the default for all of my printers. (Hopefully I'm able to post links to images --> http://i.imgur.com/kVbOZLk.png). No matter what I do though I can't get the margins to go away. There's always always always a .75 inch margin when I print and when I print preview (Again, hoping I can post links to images --> http://i.imgur.com/cxlVS8o.png). Just to note: The same thing happens printing other websites and documents (i.e it is not a problem with my website).
    Things I've tried:
    I've read that the margins are only visible in print preview and printing the page will remove them. This didn't work.
    I've tried tricking the system by setting my margins to 0.01 inches
    I've tried adjusting the website to not be exactly the size of the page (I made it smaller) and the margins were still there.
    I've set "print.print_extra_margin" to 0 in Firefox's about:config page.
    I've tried a different printer.
    I've tried a co-worker's machine running a newer version of OSX.
    I've made absolutely sure that my page size it set correctly.
    I'm using OSX 10.6.8 with Firefox v21.0.
    The closest I can come to this is using Google Chrome, where there is a specific option for "none" in margins and the Chrome preview looks okay, but I'm not able to specify paper size unless I click "Print using system dialog" which gives me the same problems as above.
    How do I remove the margins and just fit to the exact size of the page?

    Welcome to Apple Support Communities. We're all users here.
    Does your Print dialog offer photo 'borderless printing' settings for various paper sizes?
    Every photo printer I've ever encountered leaves some unprintable margin, unless 'borderless' and/or 'photo' media are specifically selected.
    On many of the Canon inkjet color printers I've used, borderless printing is only available when one of the photo papers is selected, even when a custom size specified that is smaller than the actual paper, trying to make it 'borderless'
    I stitch together and print panoramas of theatre sets for my local community theater, so I end up with an image about 4.5 inches by 11.5 inches to be printed.
    Selecting a photo and opening in Preview and selecting 'Fill Entire Paper' illustrates the standard unprintable borders for my specific printer.
    When I open the panoramic image in Preview, I get this print preview. (The set image is of course rotated left)
    By selecting Letter and Borderless in the Paper Size dialog for my Canon MG5320 printer, I get this result.
    This particular Canon printer of course does NOT actually 'know' what paper is inserted, but the ink is applied assuming that a photo paper is being used, so it will saturate a standard paper.
    Hope this helps!
    Message was edited by: kostby

  • I just made a new icloud account and i want to restore my phone but i no longer have photos in my photo stream. So how can I save my photos when i restore my phone?

    I just made a new icloud account and i want to restore my phone but i dont want to lose my pictures. and i no longer have any photos on my photostream.

    Photos/videos in the iPhone's camera roll can be imported by your computer as with any other digital camera.
    http://support.apple.com/kb/ht4083
    After restoring your iPhone with iTunes, you can transfer the photos and/or videos back to your iPhone via the iTunes sync/transfer process. This is selected under the photos tab for your iPhone sync preferences with iTunes.
    Or you can create a backup for your iPhone with iTunes on your computer and when restoring your iPhone with iTunes, you can restore from the iPhones backup. Photos/videos in the iPhone's camera roll are included with the iPhone's backup. Although included with your iPhone's backup, I would still import the photos/videos from your iPhone's camera roll first.

  • My Lightroom 5 brushes tool has stopped working.  You can select a brush but when you go to the picture the dot that shows it is being used does not come up and the photo does not change....

    I use the brush tool a lot...  When I use to use it I would select the brush then select the brush tool I wanted to use like Iris Enhance.  I then would go to the picture and click on the eye.  A dot would appear to show me I was using the tool.  Then I could edit... No dot appears now and nothing changes on the picture.. My assumption is something changed that needs to be changed back,,,,, PLEASE HELP!!

    ok now When I select a tool to use the brush with the dot shows up... When I highlight the area I want to adjust it shows pink... then when i hit done the pink goes away and no changes have been made....

  • HT5661 how can I recver origonal password when I set  up my ipad 3

    How can I recover my origonal password  used to set up my ipad 3 I forgot it

    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

  • I can't click on continue when i'm gonna fill in my internet information... Any help?

    This is my last problem!

    Could be a bug... or you got some wrong conflagurations going on there. Maybe show us a screen shot?
    Do you have an iOS device handy by any chance?

  • How to avoid opening photos when connecting a camera

    how can I avoid opening photos when connecting a camera?

    Connect the Camera.
    Launch Image Capture (in the Applications Folder)
    You can set what happens when you connect this device in the lower left of the Image Capture window.

  • Thinking apple needs to bring a option to pick from photo gallery to set as a theme/background on imessage/sms that will be cool to see on iphone :)

    I THINK THAT IT WILL BE SO COOL IF YOU CAN PIC FROM YOUR PHOTO GALLERY TO SET AS THE BACKGROUND IN YOUR IMESSAGES/SMS IT WILL GIVE A NEW LOOK AND FEEL ALSO THE OPTION TO BLUR THE BACK GROUND JUST A LITTLE OR SET AS IS.....WHAT DO IPHONE USERS THINK SHOULD APPLE DO THE NEXT BIG UPDATE WHERE YOU CAN DO THAT ??????

    This is a user to user technical help forum. You can contact Apple here: http://www.apple.com/feedback/

  • Can I edit the size of my photo when setting up an email signature?

    Can I edit the size of my photo when setting up an email signature?

    Not sure what you mean by "photo screen?" Do you mean your Photo Stream?
    In the Photos app there are several ways to view the photos. Tap on Albums. Your Photo Stream is one Album but there may be others including the Camera Roll, albums made on the iPad with photos from the Camera Roll, and albums of photos copied to your iPhone by syncing with your computer.
    To remove albums from the Camera Roll, tap on the Camera Roll album to see the small thumbnails of the photos there. Tap on Select, tap on the photos to delete, then tap on the trashcan. The photos will then be moved to another album called Recently Deleted. They remain there for 30 days to allow you time to reconsider whether you really want to delete them or not. After 30 days they will automatically be deleted from your iPhone. But if you are sure you want the photos deleted from your iPhone delete them again from the Recently Deleted album.
    Albums created on the iPad with photos from the Camera Roll can be deleted in the same way.
    To delete albums copied to your iPhone by syncing with your computer running iTunes are deleted by doing another sync. But before you click on Sync deselect the albums in iTunes. Then when you click on Apply or Sync the albums will be removed from your iPhone but they will remain on your computer.

Maybe you are looking for

  • Do not disconnect show continually.  Error message is files on the ipod are being used by another program

    I get the "Do not disconnect" message all the time.  When I try to eject the ipod the error message is that the ipod can not be disconnected because it is in use with an other application.  I turn off all antivirus protection and the same result.  I

  • The Document Information Panel Was unable to load. Please Help

    Hello all, I just recently created my own custom Document Panel in InfoPath. I uploaded it into a custom content type. I applied this to a document library and it is the standard document panel for creating a new document within that document library

  • IPod Shuffle - strange problem HELP!!!!

    Hello, few days ago my iPod shuffle suddenly stopped playing. In the first place I thought it was a battery. But after over a 8hrs of charging, restoring software etc. it looks like that: after sliding the button into one of the two play modes only t

  • Session lost in jsp containing iframe

    In our application after a user logs in to the system he gets a front page which contains an Iframe. The login process initializes variables in the session (and the user�s security preferences). In some rare cases the Iframe forces the web server to

  • Mail to vendors abt vendors payment

    Dear all We have one requirement : Generally first we will create batch(  open item ) using zreport. After that we will cleared this batch using f110. My requirement is: When I created batch using z tocde: those  document for clearing  we need to sen