Can't close Burn

I was burning a CD to backup my desktop, and pressed Cancel in mid-burn. The Burn window froze up, and I can't close it, and can't use Burn. I managed to eject the CD, but the Burn window is still there. The red circle doesn't function. The orange circle puts the window into the Dock. I have restarted, Shut Down for both long periods and short periods, but the Burn window is still open, with the blue line about a half-inch long. What to do?

So it sounds like you are trying to burn a DVD with photos on it so the photos can be either transferred to or displayed on a Windows PC, is that correct?
For the purposes of this I am going to assume you are using iPhoto '11.
Gather the photos you want to burn to DVD in one album in iPhoto. This is not absolutely necessary but it sure makes things easier for me.
Select that album, then go to the File menu and select Export...
In the dialog that shows up, select the File Export tab. Select the setting you want to use for export. Click the Export button.
Another dialog will show up. Set the location to Desktop and click the New Folder button. Name the folder something nice and descriptive and click the Create button.
Click the OK button. Quit iPhoto as the rest of this work will be done in the Finder.
You will now have a folder on your desktop with that nice descriptive name. Find it and select it. Go to the File menu and from it select Burn "Descriptive folder name" to Disc...
Insert a blank DVD when prompted.
Let the finder complete the work and eject the disc afterwards.
That's it. Best of luck.

Similar Messages

  • I reinstalled I-Tunes several weeks ago.  Since then I can no longer burn MP3 Discs with Title and Artist Info.  Sometimes it only burns every 3rd song.  No Audio CD it seems to function OK.  The version has the "cloud" but I don't know if that matters or

    I reinstalled I-Tunes several weeks ago.  I can no longer burn MP3 Disk with Song/Artist info onto disc.  It comes up as No Artist/No Title on car CD unit.  Old MP3 Disk previously recorded still show all info.  Sometimes only every 3rd song is on the MP3 CD.  On Audio Disc there is no change and all info still shows up.  The new I-Tunes version has the "cloud" on it if that could make a difference.  In the select Burn CD mode I can select testing and add song info for Audio Disk but it shows shadowed out for MP3/Data.  I added and removed ID tagging from my list to see if that made a difference but it didn't.
    Any Thoughts?
    Jim

    This may help.  Audio files are actaully in the DATA folder.  These can be editted with Soundbooth then they must be imported intot the specific slide in the Powerpoint presentation.  Publish the presentation (as you'll read below) and *should* work This reply came from robva65 [email protected]
    Let's try this: *Publish* the PPT deck you have.  What you'll end up with is a set of files and folders, but I want you to look for the *data folder* that's created as a result of the publishing process. (Unless you specify where you're publishing to, Presenter will publish to a directory called "My Adobe Presentations" by default, so you may have to look there on your harddrive)  Inside the data folder will be a list of mp3 files, which, if everything goes smoothly, should make it much, much easier to see which audio is used by a specific slide.
    Here's what I mean: for example, after publishing, I have a data folder and inside I found the following file: a24x9x3.mp3  As I double click the mp3 file (which causes it to play using Windows Media on my laptop), I can hear that it corresponds to my slide 9 in my PPT deck.  And there's corresponding mp3 files for each and every slide I have in my deck.  I'm clicking another file (wouldn't it be nice to see what I'm doing???) a24x20x3.mp3, and that file corresponds to my slide 20 content in PowerPoint.
    So again, give publishing in PowerPoint a shot and see if that makes it any easier.  Well...not nearly as easy as recording in Audition/Soundbooth/Audacity, but it's close enough to hopefully dig you out of that hole you're in now.
    Hope this helps ~rich

  • Since I updated my itune software can no longer burn cd's

    Since I updated the software I can no longer burn cd's. It says a message on the top window 'Disc burner or software not found'. Can anyone offer assistance?

    Dear friends,
    I got this problem too.
    I solved this problem updating iTunes to the most recent version (v7.3.2.6 at this moment) and also updating the SPTD driver (you have it installed if you use Daemon-Tools!) to the version 1.50.
    You can find it at:
    http://disc-tools.com/download/daemonsptdmd5sum
    Download SPTD v1.50 and execute it to update. Remember to close all running applications before updating. You need to reboot for changes to have effect.
    I hope this post is useful for you all.

  • What's the maximum size a playlist can be when burning?

    I always need to leave a few meg under 700 when burning a playlist to 700meg cd and was wondering if anybody knew the maximum a playlist can be to burn? Not sure if the media has anything to do with it. Would just be nice to be able to plan ahead since I make a lot of comps and sometimes need to cut a song at the last moment.

    I'm making mp3 cds. Technically I'm using CD-R Audio discs (80min/700mb) as I have a home-audio cd burner and these discs are compatible with both. The problem is that I have tried to burn playlists that are close to 700mb but wouldn't burn as iTunes said it was too large for the disc, so I need to leave ~3-5mb free for it to burn. I guess it uses that space for the index/xml or other data. I was just wondering if anybody knew exactly, or very close to the maximum you can burn.

  • Can't close iTunes 7.7

    I just installed the latest iTunes update. Everything went as usual, and my iTunes has always worked nearly perfectly, but now I can't close the program. It works just fine, but when I close the window it hangs and I have to end the program through the task manager. Once again I try to keep everything up to date and I get burned....great.

    Please stop blaming ESET NOD32 (old or new versions)
    I have been using them for abt 4 years now.
    NOD32 just checks for the shared network library, which is piped between iTunes and its additional new tool, Bonjour. Nod32 finds this interconnection pointing to networked resources but there is nothing at the other side of this pipe, so it goes in a loop - coming back, asking Bonjour for the reply and then going back to the networked resources.
    Since Bonjour doesnt find anything on the other side.. it just keeps looking, doesnt terminate its search.
    So if u uninstall or disable Bonjour, it works just without any problems.
    If you tweak ur Nod32, that is fine but i wudnt want to leave any hole or place on my system which isnt protected... its my system after all.. and i dont want to fiddle with my AV, especially whens it involves the STATE-OF-THE-ART ESET Nod32.
    I have spent more than half of my life working on Digital Security, Malwares and compromised Networks - dont want to change my lifestyle just coz a newbie Bonjour makes my AV go look for something that doesnt exist!
    Cheers!

  • How can I close an AppleID/iCloud account that is no longer used?

    I have 2 MobileMe addresses that were moved to iCloud. As we all know, AppleID's cannot be merged. All of my purchases are under my main AppleID/ iCloud account. I just want to close the 2 I am not using. Has anyone ever successfully done this?

    You can't close accounts or ID's, you can only stop using them by deleting the accounts from your iOS devices.

  • I recently tried to burn some photos to a disc.  It did not work, but then I ended up with a .fpbf folder on my desktop.  Can't trash it, and when trying to burn again, I get this "... can't be burned because the original items can't be found". Help???

    I recently tried to burn some photos on a CD. For some reason, It did not work.  Now I have a .fpbf folder on my desktop. I can't seem to get rid of it.  I tried dragging it to the trash, but then I get a box asking my to type my password it, so Finder can make the changes.  Doing so, does nothing at all.  And when I try to burn another CD from the same .fpbf file, I get a the following message: "There are 35 items that can’t be burned because the original items can’t be found. Skip the items and continue burning?".   When I skip and continue burning, nothing shows up on the CD.  In the meantime, the .fpbf folder is still in my desktop.  I tried changing the aliases on each pic, but it still doesn't work.  Any ideas of how I can remove this folder from my desktop?
    Thank you.

    Beavis2084,
    Thank you for your detailed explanation but something is seriously wrong with my computer. Although the method you have described is very similar to the one I tried in step 2 from my second post, I have since "done things" which may have complicated matters—or suggests that my computer has a more serious problem.
    Here's what I did:
    1). Installed Onyx and discovered that I had a .plist file (com.apple.iphotomosaic.plist) that was causing a Syntax error: "Conversion of data failed. The file is not UTF-8, or in the encoding specified in XML header, if XML." After doing some research online, I was given the understanding that downloading the iLife update 9.0.3 (I installed the more recent version, 9.0.4) would solve this problem because it would also fix some system issues. So, I downloaded it...and when it didn't solve the problem, I decided to just deleted that .plist file.
    2). I read your knew post and decided to follow your directions, even though I realized they were basically the same steps I followed in the 2nd method I mentioned earlier. I say "basically" because, for some reason, after inserting a blank disc, my computer does not open the disc in the Finder. Instead, it places the blank disc's image on the Desktop, even though the Finder's Preferences and the System's Preferences are set to have it open in the Finder—nothing should be on my Desktop! (Note: When transferring the items (all folders) I want to burn to the blank disc, I did not use the Option-Click-Drag method as before, I used the Click-Drag method, which created the curved arrow in the lower left corner of each item.)
    Now, for the result of "method 2," the method we basically have in common, the computer goes through the burn stage but, in the verify stage, tells me that it is unable to verify the disk, suggests that my DVD may be unreliable and that I should try another disc, and then tells me about some "fork" (?) error (-43).
    I don't know what to do anymore...

  • I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

    I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes.  The drivers are up to date
    Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
    Dell Inc. Latitude E6420
    iTunes 12.0.1.26
    QuickTime 7.7.6
    FairPlay 2.7.39
    Apple Application Support 3.1
    iPod Updater Library 12.0
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 8.0.5.6
    Apple Mobile Device Driver 1.65.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 3.06.0.2770
    Gracenote MusicID 3.06.0.2770
    Gracenote Submit 3.06.0.2770
    Gracenote DSP 3.06.0.2770
    iTunes Serial Number 756D13C00C3583C8
    Current user is not an administrator.
    The current local date and time is 2015-01-13 14:47:35.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 12.0.1.26 (x64) is currently running.
    iTunesHelper 12.0.1.26 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    LowerFilters: SbCeCd (3.2.6.3),
    UpperFilters: GEARAspiWDM (2.2.3.0),
    F: HL-DT-ST DVD+-RW GU40N, Rev A103
    Drive is empty.
    The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
    F: HL-DT-ST DVD+-RW GU40N, Rev A103
    Audio CD in drive.
    Failed Reading table of contents, error 4000.
    Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
    Audio CD reading failed. Error Code:   87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
    iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
    Get drive speed failed. Error Code: 4000.
    The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

    Hi iTunes-1,
    Welcome to the Support Communities!  The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.  
    iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
    http://support.apple.com/en-us/HT201852
    Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
    To run CD Diagnostics, follow the steps in this document.
    After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
    Here is an example of what section three might look like:
    In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
    If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
    If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
    Run CD Diagnostics again.
    Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
    Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
    Last Modified: Nov 8, 2014
    Also, you mentioned that you have been successful burning a CD with the Windows OS.  Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive.   Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
    I hope this information helps ...
    - Judy

  • Error Message while trying to burn a DVD-R with my MacBook Pro: "The disc can't be burned, because the device failed to calibrate the laser power level for this media.

    While using my Mac OS X Version 10.6.8 to burn a DVD-R I keep getting the error message: "This disc can't be burned, because the device failed to calibrate the laser power level for this media."
    So, I tried the iDVD and got the same error message.
    Can anyone out there help me? I've tried both a DVD - R, and a CD.
    I made a short 2:20 minute presentation from iMovie and used the "share" to iDVD, then to iTunes, then I tried exporting it to Quicktime and saved it on my desk top. That is when I tried burning by opening the blank DVD-R in the finder then draging the movie on to it and selecting the burn option. Thank you for your time in helping me with this frustrating problem.
    Peace, Pyxidis

    I have had that same problem, but it was unrelated to any upgrade.
    In my case the optical drive was simply failing, and I replaced it - it was a Powerbook, about eight years old.
    It is possible that it's unrelated to Lion, as unlikely as this may seem, since you've just upgraded.
    Optical drives seem to be the most life-limited component in these computers. The laser just seems to get weak with age.

  • Is there a way we can open/close posting periods on a "per day" basis?

    Hi SAP gurus,
    Is there a way we can open/close posting periods on a per day basis?
    It is not possible in OB52 since it only has control per period and not per day.
    Will assign points for suggestions. =) Thanks!

    Hii
    In standard SAP there is not such functionality where u can do these kind of configuration...it is at least for a month that is through OB52.
    If u still wants this functionality it is through the validation.
    u need to create the validation for that company code and thn u can use this functionality....
    hope it helps u
    reward points if helpful
    sejal singh

  • HT1414 I have in my ipad icloud backup window open and I can't close and I can't do anything I tried to press OK and nothing happen is freezing

    I have in my ipad icloud backup window open and I can't close and I can't do anything I tried to press OK and nothing happen is freezing

    Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Upgraded to v. 6.0.1, can no longer burn CDs.  Details below.  Please help!

    Like many other users, I can no longer burn CDs since my recent upgrade to version 6.0.1. I was able to burn CDs with no problems before this upgrade, but now when I click "Burn Disc", iTunes freezes with no error message. I have to exit out using Ctrl-Alt-Del, as iTunes is not responding.
    I have a Gateway Profile 4 with Windows XP Pro. CD diagnostic info is below for both blank and recorded CDs.
    Please help this frustrated user!!!!
    Here is my CD diagnostics with a blank, recordable CD:
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Gateway Profile4
    iTunes 6.0.1.3
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: AFS2K (3.1.21.0), CDR4_XP (5.3.2.35),
    UpperFilters: pwd_2k (5.3.2.35), Cdralw2k (5.3.2.35), GEARAspiWDM (2.0.4.3),
    Video Driver: NVIDIA GeForce2 MX/MX 400 \GeForce2 MX/MX 400
    IDE\DiskWDCWD1200JB-00GVA0____________________08.02D08, Bus Type ATA, Bus Address [0,0]
    USBSTOR\DiskHP_____psc_2205_______1.00, Bus Type USB
    IDE\CdRomTOSHIBADVD-ROM_SD-R2212________________1713___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: TOSHIBA DVD-ROM SD-R2212, Rev 1713
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 10 12 16.
    The drive CDRW speeds are: 4 8.
    And here is my CD Diagnostics with a purchased music CD:
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Gateway Profile4
    iTunes 6.0.1.3
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: AFS2K (3.1.21.0), CDR4_XP (5.3.2.35),
    UpperFilters: pwd_2k (5.3.2.35), Cdralw2k (5.3.2.35), GEARAspiWDM (2.0.4.3),
    Video Driver: NVIDIA GeForce2 MX/MX 400 \GeForce2 MX/MX 400
    IDE\DiskWDCWD1200JB-00GVA0____________________08.02D08, Bus Type ATA, Bus Address [0,0]
    USBSTOR\DiskHP_____psc_2205_______1.00, Bus Type USB
    IDE\CdRomTOSHIBADVD-ROM_SD-R2212________________1713___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: TOSHIBA DVD-ROM SD-R2212, Rev 1713
    Audio CD in drive.
    Found 11 songs on CD, playing time 36:13 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:20:15
    Track 3, start time 07:12:17
    Track 4, start time 11:10:15
    Track 5, start time 14:47:52
    Track 6, start time 17:57:30
    Track 7, start time 21:50:42
    Track 8, start time 25:46:67
    Track 9, start time 28:28:45
    Track 10, start time 30:18:32
    Track 11, start time 33:15:50
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 10 12 16.
    The drive CDRW speeds are: 4 8.
    Gateway Profile 4   Windows XP Pro  

    The answer is in the diagnostic! Go to the Toshiba site (I've been so nice and found the link for you!)
    http://www.toshiba-europe.com/storage/Index.asp?page=PFT&nav=ISH_ARC&model=SDR22 12
    Try updating your drives firmware. Click 'Firware Updates' on the right hand side of this page, then follow the instructions and download the update, then install. See if that helps. Its worth updating the firmware anyway :P

  • How can I close one window without closing all open windows?

    If I open more than one window, I can't close just one. When I try to close just one, I'm warned that I'm about to close more than one (all of them) but I'm not told how to close just one.

    Are you sure you aren't getting tabs confused for windows? If you close a window containing multiple tabs, Firefox should give you a warning that you are about to close several tabs. To close a tab do one of the following:
    * click the x at the right end of the tab (when you only have a few tabs open)
    * open the tab you want to close, then click the x that appears
    * right click the tab and select 'Close Tab'
    * open the tab you want to close and press Ctrl+W
    You can close a window using Ctrl+Shift+W.

  • How can I close 'current' window and not all windows?

    How can I close the current window (only) and not all or none?
    This function works well with MS Explorer.
    Not a problem, just a desired function.

    Hi JLCluster,
    If you just click the small x in the tab you are currently viewing, it will close only that tab. I think you are clicking the x in upper right hand corner of the screen which closes all open tabs as you described.
    Hopefully this helps!

  • I have created several short (3-5 minute) movies using iMovie 10.0.6 and Yosemite.  I want to create one movie that includes these short movies that I can then either burn to a DVD or show in iMovie's Theater.  How can I do it?

    I have created several short (3-5 minute) movies using iMovie 10.0.6 and Yosemite.  I want to combine those short movies into one movie that I can loop and burn on a DVD or show in iMovie Theater.  How can I do it?  The movies are now shared to iTunes.

    Another easy way to fix this.
    What I've noticed is that upon upgrading your projects and events to work with iMovie 10, initially it will work... Until you quit iMovie and reopen it again. Any events with hashtags will show up without the star next to the iMovie event. SO, if you happen to read this, after upgrading to iMovie 10 from its predecessor, immediately change the event name to NOT include a hashtag/pound symbol.
    Otherwise, if it's too late, you can either do the above or this...
    Hold down option and click on iMovie. This will prompt you Locate, Create a New Library, Cancel this window, or Choose a different library. What you want to do is create a new library, call it whatever you want to, this will only be temporary. After the program opens, it should be a blank Library. Then go to File > Open Library > iMovie Library (your original library) and proceed to change the name of your events. Quit the program. Go into your Movies folder in Finder, delete the library you temporarily created, and your back in business.

Maybe you are looking for