Can't close Individual Windows on Safari.

The little X's that I used to use to close out of individual tabs are no longer visible, even when I hover over them. I have to close the entire window in order to close out of anything. I realize that there are other ways to close out of tabs, but this way is by far more efficient. Is there any way that I can bring back the little X's?

Please take each of the following steps that you haven't already tried. Test after each one and stop when the problem is solved. Back up all data before making any changes.
1. Quit and relaunch Safari. Force quit if necessary.
2. From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm.
3. If applicable, uninstall Glims and/or an application called "RedQuits." Log out or restart the computer.
4. Start up in safe mode. You must hold down the shift key twice: once when you turn on the computer, and again when you log in. If you don't have the problem in safe mode, stop here and post your results. If you still have the problem in safe mode, go to the next step.
5. Triple-click anywhere in the line below on this page to select it:
~/Library/Preferences/com.apple.Safari.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Desktop, leaving the window open. Relaunch the application and test. If there's no change, quit again and put the item you moved back where it was, overwriting the one that may have been created in its place. Otherwise, delete the item you moved. If possible, restore it from a backup that predates the problem.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Similar Messages

  • I can't close one window in Safari.

    I can't close one window in Safari. I'm on an iMac 27", OSX 10.9.4 and using Safari Version 7.0.5. I have several windows open - one with the header in grey (as they appear when not selected) and am able to individually close the other windows. The problem window has several tabs. I cannot close that window. If I try to select it, the top bar remains grey. I've quit and restarted, run disc utilities, run permissions and no problems show. At a loss how to handle this. I do not have this problem with Firefox.

    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

  • How can you close all pages in safari?

    On my iPad it is possible to close all windows in Safari.
    Is there a similar feature in Safari? Every time I clear the history, the last page remains open.
    How can I close that window as well without having to first create a new blank one?
    Regards

    Yes, ok, but then I still have to open a new page to continue browsing.
    on the iPad i can close all pages and safari for iOS defaults to favorites.
    regards

  • Can't Close the Tabs in Safari

    The X at the top right of each tab in Safari have dissappeared and I can't close individual tabs that I have open.
    I would have to click FIle and then Close tab for each tab that is open. I like the other way better. What happened to it and how do I get the 'X' back? Thanks for your help!!
    p.s. I'm using a desktop

    Hello LexSchellings,
    No there is no other icon besides the X to close the tab.
    I don't think anyone installed any new software, extensions or plugin for safari. I share this computer with three other people so might be a possibility but I highly doubt it. I was trying to see if I can fix this issue by customizing my toolbar but there is no option for the tabs. Thank you for taking the time to help me with this!

  • How can i view multiple windows in safari? I used to do it with the 3 finger sliding, but that feature is gine now. please help

    how can i view multiple windows in safari? I used to do it with the 3 finger sliding, but that feature is gine now. please help

    Try a 2 finger Pinch to see the tabs.

  • Can't open any windows in Safari even after re-install

    I can't open any windows in Safari, even after installing Snow Leopard, not even the "About Safari" info window. I'm using Firefox to get online. I can open the program itself, but can't do anything else. I'm suspicious that it may be a virus, because I'm getting some weird messages on restart, such as asking me if I want to use some wireless network I never heard of, and if I want to give somebody access to my Twitter account - very strange. My son was using a website when this happened.
    Message was edited by: Alba17

    Greetings,
    I'm suspicious that it may be a virus
    Not possible, since there are no viruses for Mac OS X. You should ask your son what site he was one and whether or not he downloaded and installed anything. And you should turn off wireless networking and delete any networks that you didn't specifically setup. Use Ethernet to connect to your modem/router for Internet access.
    Are you sure that Twitter is asking to give somebody access to your account, or just authorize them to follow your tweets? I've never seen Twitter do the former for anyone, ever.

  • Can anyone help me close this window in Safari?

    I can't seem to close this window out in Safari. Everytime I restart Safari it opens all of my previously opened windows. I can't seem to acess or empty my cache to start fresh and my menu options are mostly faded out. Can someone tell me how I can start Safari over and open a new window by default instead of having it open an old session up? 
    Here's a screenshot of what I'm talking about:

    Scratch that. I fixed it!

  • Can't close a window in html or JS

    How can I close a "child" window opened from a "main" window in html or JS without resorting to asking the user to close the "child" browser window? I think I have tried just about everything. I have tried opening the "child" window by an tag and with JS. I can get the "child" window to open but cannot seem to return to the unchanged "main" page. I know I must be doing something wrong.

    <form> should be inside the body element.
    <html>
    <body onClick="window.close(self)">
    <form>
    Click here to return to entry form.
    </form>
    </body>
    </html>
    There's no immediate need for a <form> element. You can use a pseudo button. Simply give the visitor something to click on.
    BTW the browser "back" arrow is dimmed in the child window in IE, Firefox, and Safari.
    When a webpage is opened in a new window there's nothing to go back to.

  • Can't Close/Minimize Windows

    Frequently (but not always) I can't close or minimize windows. If I drag the window slightly (in any direction), suddenly the close/minimize buttons become responsive. The problem happens in all Apps. Any thoughts on what this could be? (Running Mavericks 10.9.3 on a MacBook Air 13'')

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • How can I close one window without closing all open windows?

    If I open more than one window, I can't close just one. When I try to close just one, I'm warned that I'm about to close more than one (all of them) but I'm not told how to close just one.

    Are you sure you aren't getting tabs confused for windows? If you close a window containing multiple tabs, Firefox should give you a warning that you are about to close several tabs. To close a tab do one of the following:
    * click the x at the right end of the tab (when you only have a few tabs open)
    * open the tab you want to close, then click the x that appears
    * right click the tab and select 'Close Tab'
    * open the tab you want to close and press Ctrl+W
    You can close a window using Ctrl+Shift+W.

  • How can I close 'current' window and not all windows?

    How can I close the current window (only) and not all or none?
    This function works well with MS Explorer.
    Not a problem, just a desired function.

    Hi JLCluster,
    If you just click the small x in the tab you are currently viewing, it will close only that tab. I think you are clicking the x in upper right hand corner of the screen which closes all open tabs as you described.
    Hopefully this helps!

  • How can I close all windows in Preview?

    Hi all
    I can't seem to find a way to close all windows in Preview.
    Can somebody try this and see if they get the same result I do.
    1. Copy an image into the clipboard.
    2. Open Preview
    3. Hold down command-N for about 20 seconds.
    You should end up with dozens of windows with the image that you copied.
    Now, try to close them.
    I've unchecked 'Restore windows when quitting and re-openng apps' in System Preferences
    I've typed in the 'defaults write com.apple.Preview NSQuitAlwaysKeepsWindows' hack in the terminal window
    I've quit Preview with the 'option' button held down and 'Quit and Close All Windows' showing in the menu.
    No matter what I do, the windows keep coming back every time I start Preview.
    This 'force restore' feature of Lion is starting to get really annoying.

    If I hold down the option key and go to Preview->File the Close Window menu item changes to Close all
    I answered the OP's question but I see now that the question wasn't what he was really asking.

  • Can't close some windows for some programs.

    I've just noticed this recently. In a lot of programs I'm using, the red X to close the window is grayed out and I can't close it. I have to close it by pressing command + Q or going to "Quit". I know it's something with my system because I know people that have the same programs on their Mac and the red X works fine. Very irritating!

    Click on the Apple in the upper left screen and choose force quit then choose quit quicktime

  • [dwm] can not close irssi window when opened in a xterm class

    Hello guys,
    I know the subject title is not really meaningful but the problem is a bit odd.
    When I start irssi in a opened xterm window I can easily close it via modkey-shift-c. To open it directly in a specific tag I created a new class for irssi and defined in config.h how to deal with that class.
    the script called "irc"
    #!/bin/bash
    xterm -class irc -e irssi &
    and the relevant part of config.h
    static const Rule rules[] = {
    /* class instance title tags mask isfloating monitor */
    { "irc", NULL, NULL, 1 << 1, False, -1 },
    When I then try to close the window with modkey-shift-c I just get the message "Irssi: Reloaded configuration".
    I don't really know why this happens. I defnied also a seperate class for alsamixer and closing this is working without any problem.
    What could I try to solve that?
    Best regards.
    Last edited by orschiro (2010-01-22 21:29:02)

    What key do you have assigned as modkey in dwm?
    It seems that modkey+shift+c is issuing the /RELOAD command in irssi rather than closing the window.  The modkey is superceded by whatever appilcation is running in the terminal. 
    I run irssi in xterm and modkey+shift+c closes it without issue.

  • Can't Close Finder Window Over Document

    I was in a document, using the Help menu, thought I selected a Help topic (may have slipped and hit a different key?), and suddenly a Finder window sheet came out of the document as if I needed to Save As or select something on my hard drive. Problem is, the Cancel button and its partner (whatever it is ... Save?) dropped below my screen, so I can't close the Finder window to get back to my document. Nor can I Quit Pages (without Force Quitting and losing data) or close the document. I am stuck. Is there a way out?

    Sorry, I thought from the expressions you used, you were less experienced.
    Yes it is really not very Maclike to use the Escape key, we always used (cmd .) but OSX is much closer to the darkside now in an attempt to be more familiar to switchers. I have to consciously use it now as it is needed to get out of the many circumstances now where there is no visible navigation left on the screen.
    IMHO to not have some way out of situations like this, harks back to the worst of DOS practices.

Maybe you are looking for

  • Home network setup HELP

    Hi Firstly I cannot get my Linksys RE1000 to work with my network having tried the set up CD on 2 computers (mac and windows) The main router is a BT Home Hub 2.0 any suggestions Secondly this is what I am trying to achieve so help to do that would b

  • Aging of vendor advances

    Hi Team, how can we prepare aging analysis of vendor. there is no input field available for mention payment terms in advance booking screen F-48 hence it is difficult to prepare the aging analysis. advice any for this..... Regards Sree

  • Flex Mobile - PDF not displaying error - "Adobe Reader not found"

    Hi everyone, Is viewing PDF documents supported in Flex Mobile projects?  At the moment, I get an error saying: "Adobe Reader not found" I am converting my Adobe Air Desktop project to a Mobile project with Flashbuilder 4.5.1. Any documentation refer

  • Table associated for Batch and PO line item

    Hi All, I am looking for a table,where I can see the batches associated with the Purchase Orders. Thanks, Seshadri

  • Cost variance for the material master

    Hi all, This is very urgent requirement. How to maintain cost variance for the material master? I will assign the points venu