Can't close old production order

Hello,
First, yes, I know this question has been posted many times. I have checked to make sure the order is in TECO status. I have checked COGI, CO1P and COFC. Please read my comments and let me know if you can help.
We are trying to clean up old production orders that, for whatever reason, weren't closed when they should have been. We have many examples like this one. We run CO44 at the end of the month to close open production orders. When we run this on certain orders we get the error "unprocessed future change recs for order XXXXXX prevent del. flag/completion.
The order is in TECO status.
We have checked COGI, no errors.
We have checked CO1P, no errors.
When we run COFC we get an error from 2004:
The dummy profit center was available in 2004 and we can't find any log or reason that it might have been "locked" on that date, but I suppose it is possible.
I revoked the TECO on the order and entered a profit center that has been valid for the entire period of the order and still is today. I saved and re-TECO'd the order.
I then tried to set the order to closed and got the very same error message.
All of my searches come back with the same answers, check COGI, CO1P and COFC and make sure the order is in TECO status.
How do I clear the issue with the profit center so that this order can be closed?
Thanks in advance,
Andrea

Hi Andrea
The error is still comming because there were confirmations posted with this incorrect profit center.
Technically, the error must be cleared directly on COFC before closing the order. However, since this is a very old order I believe that this record is not relevant anymore.
There is no standard tool to delete COFC records, as it may lead to errors on CO, however, for such particular cases where the record is very old and it is not possible to process it anymore, SAP provides a report to delete the entry. This report, however, is not available on any note and it is provided on request, through an OSS.
Therefore, you must open an OSS incident to SAP and request a report to delete COFC entries.
BR
Caetano

Similar Messages

Close Old sales order

HI!
     I need help to close old sales order.
     We are working with the make to Order process in our company and we have a some old sales order that we need to close. These sales order weren't shipped but were manufactured. We can't use "REJECT REASON" in sales order document because the production orders have balance and we can't appropriated the cost more.
    Is it possible closed these sales order without using Reject Reason or change the production order?
   Best regards,
Julio César

you would reverse/cancel the confirmation(s) of your production order and set its status to TECO;
now you can use a reject reason in your sales order.

How we can Reverse the closed Production Order (REVERSAL)

Dear All
How we can Reverse the Closed Production Order Which one is confirmed before 5 or 6 month ..Actually i want to reverse the production order with old pricing.Not with present pricing.
Rgds
Pankaj Agarwal

You can reverse a production order using fucntions --> Restricit Processing --> Revoke Closing.
But if you want to reverse the materials consumed with the older pricing it is not posible as per my knowledge, as the periods would be closed and you can only reverse in the present period and also that all the settlements would have affected on the order and material.

Reprocessing old production orders

I've been working with transaction CP01 to fix old production orders that contained components that were not properly backflushed or posted. How can I remove items from the CP01 log that have already been posted? There are items on the list from the past 3 years that are out of the current fiscal/posting period. How can I remove those errors?
In other words, how can I remove errors in CP01 without reprocessing them?

CP01 refers to creating Business Processes that comes under Activity Based Costing. Probably you are refering to COGI errors. Please refer to [documentation here|http://help.sap.com/saphelp_erp60_sp/helpdata/EN/b1/c04d1b439a11d189410000e829fbbd/content.htm] for dealing with such errors. The treatment for individual errors depends on each case.

SBO 2007B PL18 is not allowing me to close certain production orders

Dear All,
Please help me in the problem I am facing while closing a few production orders.
SBO 2007B PL18 is not allowing me to close certain production orders and flashing messages like:
1) Invalid Account Code [Message 173-9]
2) Unbalanced Transactions
Kindly also advice...how to close my previous questions.
Thanks in advance
Edited by: Jimmy Robert on Jul 19, 2010 1:28 PM

Hi,
You may check these first:
Invalid Account Code Error In Prod. Receipt
Invalid Account Code (Message 173-9)
To close your previous posts, you just need mark them as answered.
Thanks,
Gordon

Which user exit can be use before production order creating?

which user exit can be use before production order creating?
i want to check AFPO data,then show error message before production order creating.
1.i try to use PPCO0001( enhancement when saving the order) to check AFPO data, then show some error message,sap system will generate a abap down error.
2.i try to use PPCO0007(Exit when saving production order),
i can show error message,but i can't check AFPO's data.

Hi,
You can access AFPOD structure using field symbols.
Try below mentioned code in routing:
constants: c_afpod TYPE char30 VALUE '(SAPLCOKO1)AFPOD' .
FIELD-SYMBOLS: <fs_afpod> TYPE ANY .
data: wa_afpod TYPE afpod.
ASSIGN (c_afpod) TO <fs_afpod>.
wa_afpod = <fs_afpod>.
Then later you can use wa_afpod in exit PPCO0007. Hope this will work for you.
Sumit

Can not delete a Production Order is the Sales order item is rejected?

Hello everyone,
I can not delete the production order as the Sales order line item is rejected.
Does anybody know if any configuration change is required or any work around?
Thank you,
BG

Hi,
Could you pl. explain how the production order is created?
Also did you try by choosing Function in the menu (CO02 transaction) & try to set deletion flag or Technically complete?
If so did you get any error message ?
Regards,
Senthilkumar

Old production order archinving (residence time 1 not exceeded)

Hello,
I began to archive old production order (year 2001). I could'nt set the deletion indicator on the old production order. I had the following message
(residence time 1 not exceeded) but the residence time 1 field is blank in the customising.
any ideas ?
Best regards
Bruno

Hello Bruno,
have you set deletion flag first?
Regards,

How to close old process orders dated 2006?

I have a open process order dated back to 2006. There is a negative balance of -$100 on this order.
Now in 2010 i want to close this order. The status of this order is TECO. However when i want to close this order, the system says i need to settle the negative balance first before doing so.
Hence when i run the settlement to material the system says the process order is not technically completed yet because i have not done the final delivery yet.
When i do final delivery using a current date in 2010, the system said it could not determine the object currency for the activity types used in the order since the cost center tied to the activity type has a validity date of up to 31/12/2006 only.
In this case i am stuck one after another situations. How can i close this order without going through all the above conditions?

Hi,
One alternative is to change the Settlement profile setting (attached to Order type) in OKO7 to 'Can be Settled' from 'To be settled in Full' briefly, which allows you to close the Order even with some balance on it. Revert back the setting once you are done.
Hope this helps.

Close Multiple Production Orders?

Just wondering if there is a <b>mass</b> version of ko88 or kkax for settling orders.
Would be nice for the 50-100 production orders that need to be closed per day to be done all at once.
Thanks for any ideas!

Hi,
You can try KO8G.
Cheers !

How can we delete the production order against sales order

Dear All
i

Dear Gopi,
In CO02, go to functions tab and select deletion flag active and save the PO. Once you activate the deletion flag GI, release and operation confirmation will be deactivated.
See below link to get more understanding.
Delete Production Order from CO02
Regards / US

I can't download digital product (order number: 9736156159 )

Please help me fix this:
Sorry,
You tried to download too many times.
If you have any questions, please contact Digital River Customer Service at [email protected]

What product? What system? What went wrong with your download attempts? You need to be more specific.
Mylenium

Can we delete production order or Process Order

1.Can we delete production order or Process Order
2. Significance of TECO
3. How we can do Goods Reciept apart from production scheduling profile

Dear,
Delete production order check this link,
http://www.sap-img.com/production/how-to-delete-old-production-orders.htm
Go to CO02- Change production orderin menu choose-Functions--Restrict Processing-Technically Complete
Teco will close the Production order from Logistic point of view , reservation get deleted, capacity requirement also get deleted.
Auto GR can possible through control key with mark as auto GR in work center.
Regards,
R.Brahmankar

Finance cannot close production order due to some PO# error message

When user is trying to close production order(using tcode CO02) getting error "..Production order #: Purchse order still exists..".
I would like to know what is the reson for this error and how user can close this production order.
Appreciate your quick response.
Thanks,
Aritra

status of production order: TECO PRT CNF DLV PRC BASC BCRQ GMPS*.
Vijay actually basic problem is user is getting error "You cannot select assembly order 16600192 for deletion" when he is trying to delete one line item from sales order using tcode VA02...
-i said to close the production order
-but they said not able to close as they are getting error "purchase order still exists"
-said to close all purchase order
-they replied "We cannot close the open orders as some we are waiting for the materials to be arrived and some order are blanket orders. Why we don't have such problem all this while and now ? This is our common practise.
Is there any way of force closed for Finance since the SF material has been GR in 23/03/2006.We only need
to closed the order, that's all."
pls tell me what to do, can we close production order in such scenario?
thanks
Aritra

How to close production Order

Hi All,
The production order planned and Released date is 17/12/2008, and the Issue for production order document date is 17/12/2009 (it was entered by mistake in the system with 12 months difference). When you try to close the Production Order the system shows an error. How we can deal with this sistuation?
Thanks
SV Reddy

Dear,
Kindly check the note 1330151 below:
Symptom
When closing production order, the error message "Invalid Account" is
shown, although the account settings are correct.
Other terms
WIP Inventory Account, WIP Inventory Variance Account
Reason and Prerequisites
Consulting
Solution
Please go to "Document Settings", tab "Per Document", Document "Journal
Entry" and check "Allow Zero Amount Line".
Explanation:
When closing production order, a JE between "WIP Stock Account" and "WIP
Stock Variance Account" will be posted. When there is no difference
between actual component cost and product cost, the amount in JE will be
zero. That's why if zero amount line is blocked in journal entry, the
production order can't be closed.
WIsh it is helpful for you.
Regards
Apple

Can't close old production order

Similar Messages

Maybe you are looking for