Can't communicate with iPod

Am unable to add or amend items in new iPod. On attempting to upload a track I get a message saying required field cannot be found. On attempting to restore iPod message appears indicating 'unknown error 1415'. have latest versions of software.

Here is an article from the apple support website that will help.
http://docs.info.apple.com/article.html?artnum=304508
Make sure the ipod is connected directly to the computer and not through a hub or keyboard connection.

Similar Messages

ITunes can't communicate with iPod - AGAIN

I got the pop up this morning "iTunes maybe unable to communicate with iPod". So I followed the instructions from the link. And reboot my PC. I relaunched iTunes and still got the pop up saying it maybe unable to communicate.
Does anyone know what is causing this, and have a work around? Or is there a decent 3rd party software that will do the work of iTunes?

It was my friend Gail who was having problems. I finally went over to her house to check it out this morning, and found out she was logged on to her machine twice, once as herself and once under her guest account. She logged on to the guest account to check something or other out, and didn't realize there was a difference between "switch users" and logging off of one account and on to another. :-P
So the answer to your question is "Yes". Thanks for your time. I think we can count this issue as resolved.
Robin

ITunes can't communicate with iPod bec it's locked by another user

I'm getting this message when I connect my iPod to my computer:
"Another user on this computer is using the ipod software so iTunes is unable to communicate with this ipod. please ask the other user to log out."
I suspect at some point the Windows dialog for "what to do when this device is attached" came up and I hit ok, not realizing it. Every time I attach the iPod, it opens a Windows Explorer window showing me the files inside (Calendar, Notes, etc), and then iTunes gives me hte message above.
I don't know how to tell Windows to butt out. I'm running Windows XP. Any advice would be greatly appreciated.
Robin

It was my friend Gail who was having problems. I finally went over to her house to check it out this morning, and found out she was logged on to her machine twice, once as herself and once under her guest account. She logged on to the guest account to check something or other out, and didn't realize there was a difference between "switch users" and logging off of one account and on to another. :-P
So the answer to your question is "Yes". Thanks for your time. I think we can count this issue as resolved.
Robin

Itunes can't communicate with ipod

i was trying to upload a new purchase on to my ipod (regular, black and white 20 gig one) and i got a message to the effect that the software could not communicate and i should reinstall itunes. i have done this, but the message remains. i am also unable to disconnect my ipod safely when this happens. any ideas?
p.s. thanks to all the people who answer these. you are better than paid tech support at most places...

Try the suggestions here, from Apple tech support:
http://docs.info.apple.com/article.html?artnum=93716

Software necessary to communicate with Ipod not properly installed

Hi,
I updated my Itunes software and have been having problems ever since. Every time I connect my Ipod I get the message: "Software necessary to communicate with Ipod not properly installed. Reinstall Itunes..." After I click Ok it goes to Itunes but it does not recognized the Ipod. Now I have reinstalled several times and even downgraded to a previous Itunes version but keep getting the same error. Even though I don't know if this has anything to do with it, yesterday I noticed that I cannot watch any YouTube videos either, i get the error: "Hello, you either have JavaScript turned off or an old version of Adobe's Flash Player. Get the latest Flash player" Any help would be highly appreciated!

A lot of users are getting this. See 'can not open iTunes' obove this in the forum

Compter says it can't communicate with Mini

This mini has been able to connect and download music. I removed several virus programs and now the computer says that it the software that itunes needs to communicate with the mini is intstalled wrong. I removed itunes, reinstalled...same problem. I simply want to connect between the mini and my PC to update files.

Yes I have Xp and you are correct that logging other users off is essential always when using this software. However, even being the only user logged on the message remains "unable to communicate with ipod itunes software incorrectly installed.
Hopefully someone from APPle actually reads these and can provide a definitive answer
Thanks for yours too.

Software not installed correctly to communicate with ipod/iphone. This message appears when itunes is opened

software not installed correctly to communicate with ipod/iphone. please install again

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

I accepted a recent update for iTunes and now my version of Spin Doctor can't communicate with it any more. I don't think I can upgrade the Spin Doctor without buying a new program. Is there a way to undo the last iTunes update?

I accepted a recent update for iTunes and now my version of Spin Doctor can't communicate with iTunes, specifically, I can't get music files to go over to iTunes. Spin Doctor gives me a message indicating that iTunes isn't working properly.
I am using iTunes 9.1.1(12) and Spin Doctor 3.1.1.304t. I have investigated upgrading the Spin Doctor but I think too much time has passed and the version available are too far advanced.
Any ideas? Can I undo the iTunes upgrade? Is there a website that I can go to to get the upgrade for my Spin Doctor?
Thanks.
Mary

If your iMac is an Intel CPU model, you can upgrade the OS to OS X 10.6 Snow Leopard.
Then use software update to update 10.6 Snow Leopard to OS X 10,6.8.
Then you can run the latest iTunes to sync your iPad running iOS 6
You can purchase OS X 10.6 Snow Leopard by calling Apple at 1-800-MYAPPLE. Ask for retail software sales and purchase a copy of 10.6 for $19.99 plus shipping.

Computer Can't Communicate With Printer

Hi,
After installing Win 8.1 on two different computers, both have the same printing problem.
The first problem that appears is "Bidirectional Support" must be enabled... It was enabled in Win 8 prior to the upgrade...
It took awhile to figure out how to enable it, as after every attempt to check the box, the check would disappear after closing and reopening the window.
It turns out that this won't work with the printer connected. After disconnecting the printer the setting will stick, and when the printer is reconnected it stays that way...
Unfortunately this doesn't resolve the problem... Now I get the error that the computer "Can't Communicate With The Printer"
Attempts to reinstall the software\drivers have been for the most part useless... Even after removing the printer in Devices and Printers and uninstalling the software\drivers, the Driver installer insists that the drivers are still installed and will only
"Update" them, or "Install Another Copy"... neither of which resolves the problem...
On one occasion, I was able to get a complete install, but only after doing a search through the Registry and Deleting everything that came up concerning the printer... This still didn't resolve the problem.
On one machine, after doing this, the Print Spooler would hang and run the CPU at 50% indefinitely. After playing around awhile, I found that if I turned off the Print Spooler in "Services" while it was doing this, and then restart it, the file
would actually print properly...
I have checked the settings in Windows Firewall, and everything for the printer is "Allowed". I even turned the Firewall off to no effect...
This is a Lexmark X5340 USB inkjet printer that works perfectly on the same machines when running Win 7 or Win 8 with all the same connections, software, drivers, and etc....
Is there something different with Win 8.1 than Win 8 concerning printers?

Hi,
I wanted to let you know that I've stumbled upon a way to get the Lexmark software\drivers to reinstall on the Win 8 to 8.1 Upgrade...
It has to do with the Print Spooler interfering with the uninstall\reinstall process. I had read about a recommendation to turn off the Print Spooler before uninstalling the software quite some time ago, and I had tried that, but it didn't work. Here are
the tricks to get it to work if it isn't too late for you.
Note: Bidirectional Support is needed, and for some reason the upgrade process turns it off. This may also be related to the Print Spooler....
1) Turn on and hook up your printer... This needs to be done just this one time to get it to show up in Devices and Printers.... Otherwise, all I get with my machine is the Lexmark Fax, and as a result, you can't "Remove" the printer.
2) Once the printer is visible in Devices and Printers, unhook it..
3) "REMOVE" the Lexmark Printer and Lexmark Fax (if you have one) in Devices and Printers.
4) Stop the Print Spooler in "Services"
5) Uninstall the software\drivers... In the process of doing this, I got a popup Security message from Windows Firewall concerning "Allowing" Printer Communication... I selected "Allow".
6) At the prompt from the Lexmark uninstaller, Reboot.
7) After rebooting, stop the Print Spooler again.
8) Reinstall software\drivers... I used both XP SP3 and Vista Compatibility Mode on different attempts, and both worked... Hook the printer back up when prompted by the installer.
9) Unhook the printer again and reboot. Bidirectional Support must be Enabled, and the setting won't stick if the printer is hooked up.. You need to reboot to clear things up before the next step.
10) Enable Bidirectional Support and Reboot. To do this, go to Devices and Printers and select "Printer Properties" and then the "PORTS" tab... The check box is near the bottom.
11) Set any Printer Preferences you use, if any, and it's ready to go.
I just noticed that when I right click on the Lexmark Preferences, Properties, etc., it is showing two of them for some reason. I don't remember that happening the first time I tried this, but I might have missed it.
I'll need to investigate that a bit.
EDIT... It seems the second printer doesn't show up until after Enabling Bidirectional Support...
I guess that makes a little bit of sense... two printers for two directions.
Thanks for the info. I found it was necessary to change the print spooler. You will also need to set another service that is used during printing that provides screen interaction for the print spooler. Make both of them automatic.

IChat can't communicate with my AIM account

Hi, every time i try go to to my ichat it automatically logs me out, and when i try to log back in, it says "iChat can't communicate with the AIM account 'aforever0203' and The AIM server has temporarily limited your account due to too much activity. Try again in a few minutes" This has been happening for days, please help!

HI,
Go here https://settings.aim.com/
Can you sign in there ?
This will not work for newer @me.com and @icloud.com IDs issued under iCloud ( I notice there are at least 2 Me Toos clicked)
With Apple IDs there have been issues over the last few months about accounts getting Suspended when people have travelled to foreign lands.
The "normal" fix with AIM names is to Change the Password but obviously changing the Apple Passwords cannot be seen by AIM.
In that case you need This link about Suspended accounts and you need to use the TOS General email address.
(You need to explain very carefully that you have an Apple ID and that AIM cannot see any Password Change and that they will have to reset the account manually - some support staff seem not to know that Apple have an agreement that Apple IDs are also AIM Valid Names)
If it is a plain AIM name a Password reset should correct the issue.
11:09 PM Saturday; January 12, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Device Control doesn't show Firewire & I can't communicate with my AJA IO

Device Control doesn't show Firewire & I can't communicate with my AJA IO
Posted: Aug 1, 2006 9:10 AM in response to: Patrick Sheffield
Click to reply to this topic Reply email Email
I've seen one other post about this and I've tried the responses to it: trash prefs, rebuild permissions, reboot the computer (let it rest and uplug), trash quicktime receipts and reinstall, uninstall AJA software and reinstall.
The only thing I haven't tried is reinstalling my OS.
I'm on FCP HD.
I can capture and print to tape as an uncontrollable device. But I need to edit to tape tomorrow using the RS-422 to my digibeta deck via the AJA IO. It has worked in the recent past (last month), but in the past two weeks I can't control my deck.
Also, I get the message "This computer does not have any serial ports required by this protocol" when I try to set up a new RS-422 AV device control setting.
Help!

Jerry, I can't thank you enough. I still have a few hairs left on my head thanks to you.
I downgraded my AJA firmware and that did the trick.
I had been on the phone with AJA last week tryingto fix this problem and we had tried everything except that. You know, the trash quicktime receipts, trash prefs, hard re-boot, etc.
They were stumped and finally decided it was a Mac problem not an AJA problem. Ha! (Very nice folks though.)
Your's was an answer I didn't find anywhere else in all my searching of forums.
Thanks again!

ITunes cant communicate with iPod Mini

Recently I plugged my iPod mini into my computer to update the songs, only to have my iPod freeze up. After a while it worked again and all my songs were gone from my iPod. When I plugged it back into my computer and opened iTunes to load all the songs back on, iTunes froze and wouldnt work, when I unplugged my iPod a message would pop up saying something like "the software needed for iTunes to communicate with IPod is missing, please reinstall iTunes" after reinstalling both iTunes and the iPod software, I still have this problem.

So...
You have updated to iTUNES 5.0 and iPOD Mini version 1.4?
Some reports are up around the web about people having iPOD update problems after installing iTUNES 5.0.
Apparently, Apple will be issuing an update next week to fix the problem.
My iPOD updates fine, but I am getting a pop at the beginning of each song when I play iTUNES through my stereo using my Airport Express with Airtunes.
Never had a popping problem with the previous version.

How can I communicate with other applications from my Java application?

Hello,
I need help about how can i communicate with other application(say textpad.exe/wordpad.exe/MS word.exe) from my Java program.
More precisely, I need to know how i can get the current position of the cursor whether it is in any .txt/.doc files, then I may write some text in my java application and click a button and then my program will append the line(string) in that position of the file which is running under another appliction(Notepade.exe/MSword.exe).
Please provide me some help.

I may be wrong (and anyone, please correct me if so), but Java may not be the best tool for something such as this. I envision that you'd have to make some OS calls such as calls to the user32.dll, and while this can be done through the JNI, you'd still have to have a C or C++ program doing the dirty work.

Link 1.2.0 says "can't communicate with device"

Hi guys, my z10 running the official version of 10.2.1.537 can't connect to my blackberry link anymore. I update the link and since then, hasn't been working. I uninstalled it and re-installed but still nothing. I get the message on it saying "can't communicate with device" and that i should do a restore back to factory settings. Does anyone know what to do to solve this issue without having to restore?

There is not anything specific for Mac, did you at least try the below.
Launch BlackBerry Link.
Connect the BlackBerry 10 smartphone to the computer.
Note: The following messages should be displayed:BlackBerry Link cannot communicate with the connected device.
Power the BlackBerry 10 smartphone off and then on again.
When prompted again with the error (BlackBerry Link cannot communicate with the connected device.), ignore the warning message, however, do not dismiss or cancel it. Allow the smartphone to fully boot up to the home screen.
After 3-5 minutes the driver should install successfully and allow BlackBerry Link to continue the device setup.
The only other possible resolution is to remove the "BlackBerry Smartphone Drivers" reboot Mac and phone then reconnect phone to Mac.

Migration between two environments which can't communicate with each other

My customer is intending to do migration from test environment to production environment using CCM.
But the two environments are not in the same network.
The environments' setting is as blew.
BO TEST Repository can communicate with Web BO Server.
BO PRODUCTION Repository (Cluster environment) can communicate with Web BO Server.
BO TEST Repository and BO PRODUCTION Repository (Cluster environment) are in the different network, they can't communicate with each other.
Setting Target Repository manually in CCM.
Questions are:
1. In CCM, as long as both Source Repository and Target Repository can communicate with Web BO Server, the migration will be successful.
Is that right?
2. If 1 is not right, is there additional setting should I do?
For example, If I need to open some firewall port?
3. Is there other attentions should I notice?
Thanks

Questions are:
1. In CCM, as long as both Source Repository and Target Repository can communicate with Web BO Server, the migration will be successful.
Is that right?
Yes that is correct
2. If 1 is not right, is there additional setting should I do?
For example, If I need to open some firewall port?
You have another option which is to use the BIAR files. Export your objects to a BIAR file in source environment, and import them from BIAR into the target environment
3. Is there other attentions should I notice?
when using BIAR files as solution, Make sure that you keep them < 1GB size to avoid corruption
you may have to increase or adjust timeouts on input and output repository servers as well

Can't communicate with iPod

Similar Messages

Maybe you are looking for