Can't communicate with mail server

I just spent two hours on the phone with my ISP's IT department, and had no luck. I'm getting an error that Mail can't connect to the POP server. I tried to Telnet into the server at IT's suggestion, and the connection was refused.
Here's the puzzling part, though. My wife's computer will Telnet to the same server just fine. We're both going through the same Netgear wired router. One box can connect to the server, the other can't. Granted, my box is a dinosaur (dual 533 MHz G4) and hers is a newer Intel iMac. But the settings are the same for both and they're both running the same system version. This is a new email account, so I can't compare with past performance on this server. However, I've had several previous email accounts on this box, and they've all worked just fine.

I'm having the same problem with my wife's Mini, using 10.4.11. An error message drops down that says "can't connect." I called Yahoo DSL and was told there's no problem with our connection. Can anybody help? Thanks.

Similar Messages

Agenda can not communicate with Exchange server

Hello,
Whenever I start my agenda app on my MBP, I get the message: Agenda can not store the agenda <name> on the Exchange server. I use Office 365's Exchange server. When I use Outlook to communicate with te same Exchange server, there is no problem, but I like to use the native Apple Agenda app.
Anybody got the same problem, and more important, the solution?

Justin, I don't know if this will help but I do remember running into this in the past.
I ended up setting up my mail using our webmail server. Also instead of using my email address I used my login credential in front of the @. Our login credential is not the same as our email. So instead of [email protected] I went with [email protected] and used my password for password at setup of an exchange account. This worked like a charm.

Wired ethernet can't communicate with DHCP server

Hi all
I have a Mac Mini running Mac OS X Server. I recently changed a bunch of network settings, and since then I can't get the Mac to acquire an address from DHCP through the wired connection.
The wireless ethernet connects to the same router and acquires it's IP address, DNS, and router information through DHCP without a problem.
The wired ethernet connection is unable to communicate with the DHCP server. The router detects it, and sees it as having it's self-assigned ip address (169.254.74.247). The subnet mask is wrong (255.255.0.0 vs. 255.255.255.0) as well. Both are greyed out in network preferences when DHCP is selected. I've tried all of the obvious steps (restarting networking, rebooting everything, running the diagnostic tool, disabling wireless airport, etc.) to get it to work, with no change.
I can get it to connect with a manually assigned IP, but that's not a long term solution for my network.
I have had this issue with multiple routers. Currently I'm using a gigabit-e router - netgear WNDR3700. Other machines connect to the router just fine through wired ethernet (xbox360 and linkstation mini).
I'm new to Mac OS, but not new to networking. Any help would be appreciated.

This might be an old discussion but it was helpful to me. Well, almost. After reading this discussion, I arrived the same place that xoofoo above did. After some poking around, I was able to find the answers. (Feel free to correct me if I'm wrong, please!)
Here's what I did:
Launch "Server Admin" in Applications/Server folder
Open the list of services by clicking on the triangle next to the Server listed in the left pane.
Click on "Firewall"
Click on "Settings" tab
Click on "Editing services for" and select "192.168-net" (or if necessary, select "any".)
In the window below, go down the list and tick both "DHCP and Netboot client" and "DHCPDISCOVER". (hint, this list is sorted by ports number, go down and look for port 68).
Click "Save".
That should do the trick! Hope this is helpful to others in the future.

WRT54G can't communicate with DNS server

Hi there! So, I've got a strange and frustrating problem with my internet. We've got Comcast, and we have several computers connected through a linksys WRT54G router (through a motorola surfboard modem). Yesterday, our house briefly lost power. Upon regaining power, the internet wasn't working anymore. It was strange because both the modem and the router indicated that they were connected just fine, but, on all the computers, the network was listed as "local only" and couldn't connect. I tried directly connecting the modem to a computer, and that worked (but only after power cycling the modem once it was connected).
When attempting to diagnose/repair the connection when connected through the router, I get a "Could not communicate with the primary DNS server" message. Does anyone have any idea what could be causing this problem? Could the power getting knocked out have messed something up with the router? As of now, we can only have one computer connected at a time through the modem. The only way I'm connected right now on my computer is through tethering my phone.
Thanks in advance for your help!
oh, and I don't know if this is important or not, but we aren't actually using the wifi much at all. All the computers connect through ethernet cables. I did try wifi, though, and it still didn't work.

The power interruption probably messed up your router settings. Happened to my WRT54G a lot of times.
Just reset and powercycle the router by holding the reset button for 30 seconds, waiting for another 30 seconds then unplug the power cord for 10 seconds before replugging it back. Try to access the admin page through http://192.168.1.1 and reconfigure from scratch. This should get you back online.
If that doesn't work, try upgrading / re-flashing the firmware then go through the same reset - cycle - reconfigure from scratch process as above.

IWeb can't communicate with FTP Server.

I am trying to update my IWeb and I get a Publish Error that says "There wa an error communicating with the FTP server.   Try again later, or check with your service provider.
I've tried again and I've checked my service provider who says everything is working on their end.
I have an IMac with Maverick.

Update:   the issue is not a connection with FTP server.......it has to be something in IWeb.
I have a website that I add photos to.    I Have always added them from Aperture on the right hand side of IWeb.   Now, when I add the photo to my page, it moves the other photos around as it has always done.    I try publishing and I get the error message.    When go go to the actual website I can see a blank space where the photo should have been published.
So it's sort of updating - but instead of the picture it shows a blank.

Blu-ray can't communicate with DHCP server since I upgraded to Lion

Hi gang, hope someone can help me out. I have a Sony Blu-Ray DVD BDP-N460 that I normally use to connect to the internet and watch streaming Netflix, etc. with no problems, until I upgraded to Lion. Now, for some reason, I get an error message: "Having trouble communicating with the DHCP server." I use a wired connection directly to my AirPort Extreme, and I also use a Motorola SBV5220 SURFboard Cable Modem. I haven't changed my internet servings on my Mac.
Under system settings on my Blu-Ray on-screen display, it says "Physical connection OK, Local Settings OK, Internet Connection Failed." I've tried umpteen times going through the automated setup on my Blu-Ray, where the system automatically detects settings, etc...everything I did when I first set the system up. And I've tried countless manual setting combinations. No luck. This is really weird because I had no problems in the past...the culprit seems to be Lion because this glitch happened simultaneously with my upgrade.
I am not a networking expert so any help will be greatly appreciated.
I'm running Lion 10.7.1 on an iMac 2.4 GHz Intel Core 2 Duo with 2GB 667 MHz DDR2 SDRAM.
Thanks.

Update: So here's what's happened. I figured I would ditch the Sony and get a $99 Apple TV. I still had the same connection issues.
(FYI my network is now set up like this: Motorola Cable Modem via Ethernet to Time Capsule via Ethernet to Mac. In a separate studio, Airport Extreme wirelessly connects to Time Capsule; Airport Express connects to Extreme via Ethernet cable. For this discussion, only Time Capsule applies, not Extreme as mentioned above.)
I called support, and they had me read my Time Capsule's IP Address, Subnet Mask, Router, and DNS Server numbers to them. Then, they had me manually input those numbers into my Apple TV (via my TV screen), number-for-number, EXCEPT they had me increase the last digit of the IP Address by one (for example, my Time Capsule's IP was 10.0.1.2, and they had me make my Apple TV's IP Address 10.0.1.3).
I assume these settings would work on the Sony DVD. I'm so happy with the Apple TV that I don't even want to go back and try.
Sorry, Apple, for blaming the whole thing on Lion. Not really sure why all this happened out of the blue though.
Hope this helps somebody. I'm a happy camper now. Apple TV rocks.

Why my MDM Server can only communicate with ipads and iphones with logging Junos sslvpn.

Why my MDM Server can only communicate with ipads and iphones when either of the iPhone or iPad Junos sslvpn? Any ideas
Our iPad and iPhones users have to log in to Junos SSLVPN to be able to communicate with our MDM Server (via wi-fi). Any ideas where users don't have to log in to Junos SSLVPN?

This bothers me so much. It is absolutely ridiculous. I use my Apple ID as well as a family member's Apple ID to download music.
Every once in a while I will purchase a song and it won't download correctly or will give me an error that my computer is not authorized, a solution I usually fix by deleting and redownloading the song from the cloud. This doesn't work, however, when it happens to both accounts within 90 days.
It is incredibly frustrating to me that I have paid for a song, it downloaded incorrectly, and I must wait 90 days to try downloading it again because of these assinine policies.

I am using ipad mini ... I was unable to access facebook since long time... Its shows error could not communicate with the server.... I had install it but result was same. Can anyone help me???

I am using ipad mini ... I was unable to access facebook since long time... Its shows error could not communicate with the server.... I had install it but result was same. Can anyone help me???

first off , from the wired computer access the router using http://192.168.1.1 .. check the firmware version .. go to www.linksys.com/download and check the latest firmware available...if the router does not have the latest firmware , upgrade it first. .. after the firmware upgrade , reset and reconfigure the router
if the router has the latest firmware , then reset the router for 30 seconds .. do a power cycle...access the router ui ..default password is admin..click on the "mac add clone" subtab , enable it and click clone....save the settings and do a power cycle..ensure that the wired computer is online
on the router web ui , click on the wireless tab ..change the ssid - any non-linksys name , channel - 11 , security mode - wpa , beacon interval - 50 , fragmentation threshold - 2306 , RTS threshold - 2307 ..
let me know if this helps you..

I'm getting an error message saying that "iChat can't communicate with the AIM account __"

I'm getting an error message saying that "iChat can't communicate with the AIM account __" I don't know what to do because google.com isn't coming up either...Please help!

Hi,
For any AIM valid Name (AIM, @mac.com or MobileMe) go to the IChat Menu > Preferences > Accounts
Select the account in the list then in the Server Settings tab change the port from 5190 to 443
Also try it without the SSL option.
(Go to the Account info tab to select the Use this Account option to Log in).
Do you mean you have a GoogleTalk account of some kind ?
One based on Google Mail accounts (@gmail.com or @googlemail.com) should have talk.google.com listed as the server in iChat (Server Settings for your Google Account)
There are Other Google accounts (Non Email) that can have Talk Enabled and these do connect to a server called google.com
Both these forms login to the Jabber servers involved on port 5223 and use SSL
It is possible with Google though to also change this to port 443.
(Other Jabber servers will not allow it)
8:20 PM Friday; June 3, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Scot:can gmail be the mail server?

Hi,gurus:
Our company are ready to use gmail as mailbox,but I want to know can the gmail be the mail server in trx SCOT?Does it need authentication while sending mails?Thanks in advance.

This is possible as long as you can communicate with gmail server. (Ping gmail server from your App server)
Under SMTP Connection: in SCOT
Mail Host : gmai lhost name
Port : SMTP port given by gmail or ( if other service provider like net4 india give the given port)
Incoming Mail (IMAP) Server - requires SSL: imap.gmail.com
Use SSL: Yes
Port: 993
Outgoing Mail (SMTP) Server - requires TLS: smtp.gmail.com (use authentication)
Use Authentication: Yes
Use STARTTLS: Yes (some clients call this SSL)
Port: 465 or 587
This may work. not sure
Let me know if it works
Thanks,
Vishwanath

Error: "Verification Failed" Could not communicate with the server.

"Verification Failed" Could not communicate with the server.
I get this message every time I go to Icloud in setting menu.
also my contact are not in sync (empty on Ipad)
What does this message mean, and how do I solve it.
Everything else works (Autodesk Draw also works with Icloud and it works fine)
Mail ok
Downloading from appstore ok (also after password)
Please provide me with a solution due to this problem I can't get my contacts on my new ipad (at least that is what I think)

Ok I got it working... the Ipad stores your password at different locations. So changing it once does not do the job. I thought the Ipad had the Single Sign On function for the apple password.
So make sure that you not only change your password in "the shop" but also in the setting menu (general) and icloud menu.
this helped for me, I had to let go the Single Sign On thought first....

IChat can't communicate with the Jabber account

Got the instructions for "Configuring iChat for Google Talk" from Google at:
http://www.google.com/support/talk/bin/answer.py?answer=24076
But after adding my Gmail info. I keep getting this error message:
iChat can't communicate with the Jabber account "[email protected]"
Anybody out there come across this and solved this sucker?
THANKS

Hi,
You have entered the account info as a Jabber Name and not chosen the Google option
With iChat Open go to the iChat Menu > Preferences > Accounts
Click on the Plus Button at the bottom of the List.
In the top item in the new pane Choose GoogleTalk.
Add your ID exactly as it appears when you Log in to the Web Mail page at Google (Mail seems to except either ending, @google.com or @gmail.com but the Google Talk server does not)
Enter in the password
Click the Done button
You should now have Buddy List that Logs On
In the Account list in iChat you will now have at least three Accounts Listed (the faulty one, the new one and Bonjour)
If you then check the Server Setting tab/button on both the "google" accounts you will find the new one says the server in talk.google.com
The other will use the last part of your ID (in your case you entered a name/ID ending @gmail.com).
The reason for your confusion is that those Google Instructions are for iChat 3
You have "Missed" the bit about changing the Server Name in the Server Setting tab to talk.google.com as in fact you can add it as a Jabber account and then change the server name the same way.
You could change the server info in the "old" account or you can highlight it the list then press the minus button to Delete it.
One other thing.
It is important that Talk is Enabled in your everyday Google Account Setting (Not the mail ones).
This does add the Chat option to the Mail Web page and of course allows iChat to use the GoogleTalk servers.
I have several Jabber Accounts including Google as well as several AIM valid Logins.
I don't find the Google servers go Off line or drop connections any more (Nowadays) than the AIM ones or other Jabber servers.
9:21 PM Monday; May 23, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously
Message was edited by: Ralph Johns (UK)

The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error

We are getting the below error when we see in Crawl logs
"The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error."
This is happening in FAST search.
Here I can see soke of the logs related to this search crawl.
Could anyone please help on this?
web application 'http://xvy/' doesn't use search application 'FAST Query SSA', skipping it.
ABC\sp_search' on web application 'http://xvy/'. 2d7dba01-3d2e-4903-b59f-9a8601627bcd
07/30/2014 01:30:46.65 OWSTIMER.EXE (0x28DC)                   0x1BC0 SharePoint Server Search      Administration
dl2m Verbose Search application 'Search Service Application 1': Skipping web application '48ed7882-9f70-424e-bf72-e3c9f5340b97' because its outbound url 'http://ebc:30347' was automatically added once.
Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcp/'. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' because its outbound url 'http://nvcp' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://nvcp' for web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABc\sp_search' on web application 'http://nvcp'ext/'. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application '64d562a1-535e-4917-8979-88840e2a67fe' because its outbound url 'http://nvcp'ext' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://nvcpext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcpnew/'. 85041609-d618-4132-ac8e-195a910d99a0
executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents} [propdatabase.cxx:70] d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx
07/30/2014 01:32:04.31 mssearch.exe (0x0588)                   0x1DE4 SharePoint Server Search      Propagation Manager
e3o3 Verbose executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents} [propdatabase.cxx:70] d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx
07/30/2014 01:32:04.68 mssdmn.exe (0x15CC)                     0x1060 SharePoint Server Search      HTTP Protocol
Handler         du4i                    0x29E4 SharePoint Server Search      HTTP
Protocol Handler         du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'.   [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC)                     0x29E4 SharePoint Server Search      HTTP Protocol
Handler         du54 High    CHttpAccessorHelper::InitRequestInternal - unexpected status (503) on request for 'http://ppecpnew/robots.txt' Authentication 0. [httpacchelper.cxx:703]
d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssearch.exe (0x0588)                   0x130C SharePoint Server Search      Gatherer
cd11 Warning The start address http://nvcp'/sites/quipme cannot be crawled. Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content' Details:
The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error.   (0x80041200)
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC)                     0x104C SharePoint Server Search      HTTP Protocol
Handler         du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'.   [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC)                     0x104C SharePoint Server Search      HTTP Protocol
Handler         du54 High
07/30/2014 01:32:04.70 mssearch.exe (0x0588)                   0x2948 SharePoint Server Search      Gatherer
cd11 Warning The start address
http://nvcp'/sites/MDPPubng cannot be crawled. Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content' Details: The crawler could not communicate with the server. Check that the server is
available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error.   (0x80041200)
CHttpProbeHelper::ProbeServer: InitRequest failed for 'http://ppecpnew/_vti_bin/sitedata.asmx'. Return error to caller, hr=80041200 [stscommon.cxx:490] d:\office\source\search\native\gather\protocols\common\stscommon.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
dvg0 High    STS3::COWSServer::InitializeClaimsCookie: Probing url 'http://pncvr' failed. Return error to caller, hr=80041200 [sts3util.cxx:1332] d:\office\source\search\native\gather\protocols\sts3\sts3util.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
en0e High    CSTS3Accessor::InitURLType: Return error to caller, hr=80041200                 [sts3acc.cxx:2214] d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
dv3p High    CSTS3Accessor::GetServer fails, Url sts4://pnvpr/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200 [sts3acc.cxx:185]
d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
dvb1 High    CSTS3Accessor::Init fails, Url sts4:/mngbv/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200 [sts3handler.cxx:312]
d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x16FC SharePoint Server Search      HTTP Protocol
Handler         du2z Verbose CHttpProbeHelper::ProbeServer: Probing server with url 'http://pnvpr/_vti_bin/sitedata.asmx'. [stscommon.cxx:476] d:\office\source\search\native\gather\protocols\common\stscommon.cxx
07/30/2014 01:32:26.08 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
dvb2 High    CSTS3Handler::CreateAccessorExD: Return error to caller, hr=80041200            [sts3handler.cxx:330] d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
07/30/2014 01:32:26.08 mssdmn.exe (0x15CC)                     0x16FC SharePoint Server Search      HTTP Protocol
Handler         du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/_vti_bin/sitedata.asmx'. [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
earch application 'FAST Query SSA': Adding start address 'http://mnvfgext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvpr/'. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' because its outbound url 'http://pnvpr' was automatically added once. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://pnvpr' for web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dl2k Verbose web application 'http://abcrsp/' doesn't use search application 'FAST Query SSA', skipping it. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dl2k Verbose web application 'http://excb/' doesn't use search application 'FAST Query SSA', ski
Anil Loka

Hi,
According to your post, my understanding is that you got error when communicating to the server.
This happens when crawler is not able to connect to the server. Make sure server name is correct. Couple of steps to troubleshoot it
You should be able to ping the server from the server having crawl component. Make sure there is an entry for the server in the host file under c:\Windows\System32\drivers\etc folder.
          Ping <servername>
      2. You should be able to connect to the server using telnet command
Telnet< servername> <port number>
More information:
Troubleshooting of FAST Search Configuration
If the issue still exists, you can delete the old search application and recreate from the beginning.
You can also reset the index and do a full crawl after.
Here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/en-US/f3c61b53-304a-4c2a-a370-d0e573219d1d/an-unrecognized-http-response-was-received-when-attempting-to-crawl-this-item?forum=sharepointadminprevious
Best Regards,
Linda Li
Linda Li
TechNet Community Support

My facebook setting keeps saying "Error Signing In" "could not communicate with the server." How do I fix this?

I have been trying to fix my facebook setting but I keep getting an error message after inputting my password. "could not communicate with the server" keeps popping up. [DELETE ACCOUNT] doesn't work either. It doesn't delete my facebook account at all. What else can I do?

THIS HAS WORKED
Apple Support Communities
Re: IOS 7 Apple Settings Facebook Error
created by Pegboarder in Using iPad - View the full discussion
Go into settings/privacy/Facebook and disable the button.
Open your Facebook app and login.
Once logged in go back to that button and enable.
You may have to re-enter your password but the error will be gone.
Good luck.
Did this help? Go to the message, sign in, and reply
Start a new discussion in the same community
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
© 2013 Apple Inc. 1 Infinite Loop, MS 303-3DM, Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Apple Support Communities Terms of Use | Apple Support

IChat can't communicate with my AIM account

Hi, every time i try go to to my ichat it automatically logs me out, and when i try to log back in, it says "iChat can't communicate with the AIM account 'aforever0203' and The AIM server has temporarily limited your account due to too much activity. Try again in a few minutes" This has been happening for days, please help!

HI,
Go here https://settings.aim.com/
Can you sign in there ?
This will not work for newer @me.com and @icloud.com IDs issued under iCloud ( I notice there are at least 2 Me Toos clicked)
With Apple IDs there have been issues over the last few months about accounts getting Suspended when people have travelled to foreign lands.
The "normal" fix with AIM names is to Change the Password but obviously changing the Apple Passwords cannot be seen by AIM.
In that case you need This link about Suspended accounts and you need to use the TOS General email address.
(You need to explain very carefully that you have an Apple ID and that AIM cannot see any Password Change and that they will have to reset the account manually - some support staff seem not to know that Apple have an agreement that Apple IDs are also AIM Valid Names)
If it is a plain AIM name a Password reset should correct the issue.
11:09 PM Saturday; January 12, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Can't communicate with mail server

Similar Messages

Maybe you are looking for