Can't communicate with other hosts from primary domain.

Hi all, I add vsw0 as below:
ldm add-vsw net-dev=e1000g0 primary-vsw0 primary
ifconfig vsw0 plumb
ifconfig e1000g0 down unplumb
ifconfig vsw0 (ipaddressofserver) netmask 255.255.224.0 broadcast + up
mv /etc/hostname.e1000g0 /etc/hostname.vsw0
init 6
but now I can't communicate with other hosts from primary domain,if I plumb and up e1000g0 and down vsw0 ,everything is OK,what's wrong with it?Thanks.

This is greate!I replaced e1000g0 with vsw0 now.
Could ldm automatic update the ldm configuration parameters?I created a file for the virtual disk,the output of ldm list-bindings as below:
......................ignore.............................
Vdisk: disk0 vol0@primary-vds0
service: primary-vds0 @ primary
......................ignore.................................
but when I updated some other parameters such as vsw,vnet,the vol0 became:
.................ignore.........................
Vdisk: disk0 primary-vds0-vol0@primary-vds0
service: primary-vds0
.......................ignore........................................
and the same time the primary-vds0-vol0 link with /dev/zvol/rdsk/domdisk/dom1,so the guest domain couldn't get the boot disk,I had to update it manunally.
Did you have the same issue?
Greetings fenglimian.

Similar Messages

How can I communicate with other applications from my Java application?

Hello,
I need help about how can i communicate with other application(say textpad.exe/wordpad.exe/MS word.exe) from my Java program.
More precisely, I need to know how i can get the current position of the cursor whether it is in any .txt/.doc files, then I may write some text in my java application and click a button and then my program will append the line(string) in that position of the file which is running under another appliction(Notepade.exe/MSword.exe).
Please provide me some help.

I may be wrong (and anyone, please correct me if so), but Java may not be the best tool for something such as this. I envision that you'd have to make some OS calls such as calls to the user32.dll, and while this can be done through the JNI, you'd still have to have a C or C++ program doing the dirty work.

Wlc can't communicate with dhcpserver

Our wlc can't communicate with any host on vlan Z (subnet 192.168.1.0/24). The wlc itself is in a different vlan. All communication to other vlans works just fine. I've temporarly disabled the access-lists for vlan Z, without success. A host in the same subnet as the wlc is able to establish communication with a host in vlan Z.
How to solve this problem?
Kind regards,
D vd Wege

Please see link below. For inter vlan to work you have to configure dhcp option 43 on your dhcp server. Hope this help you.
http://cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00808714fe.shtml

Migration between two environments which can't communicate with each other

My customer is intending to do migration from test environment to production environment using CCM.
But the two environments are not in the same network.
The environments' setting is as blew.
BO TEST Repository can communicate with Web BO Server.
BO PRODUCTION Repository (Cluster environment) can communicate with Web BO Server.
BO TEST Repository and BO PRODUCTION Repository (Cluster environment) are in the different network, they can't communicate with each other.
Setting Target Repository manually in CCM.
Questions are:
1. In CCM, as long as both Source Repository and Target Repository can communicate with Web BO Server, the migration will be successful.
Is that right?
2. If 1 is not right, is there additional setting should I do?
For example, If I need to open some firewall port?
3. Is there other attentions should I notice?
Thanks

Questions are:
1. In CCM, as long as both Source Repository and Target Repository can communicate with Web BO Server, the migration will be successful.
Is that right?
Yes that is correct
2. If 1 is not right, is there additional setting should I do?
For example, If I need to open some firewall port?
You have another option which is to use the BIAR files. Export your objects to a BIAR file in source environment, and import them from BIAR into the target environment
3. Is there other attentions should I notice?
when using BIAR files as solution, Make sure that you keep them < 1GB size to avoid corruption
you may have to increase or adjust timeouts on input and output repository servers as well

My daughter is traveling to Italy from Canada with her iphone 5, I am in Canada and also have an iphone 5, can we communicate with out costing us

My daughter is traveling to Italy from Canada with her iphone 5,
I am in Canada and also have an iphone 5,
can we communicate with out costing us extra?

That adaptor should work.

Can BEA JMS C APIs be used to communicate with other JMS servers?

Hello,
          Can BEA JMS C APIs be used to communicate with other JMS servers?
          If yes, is it enough to download, compile the JMS C APIs, and link the C applications to the libraries (shared or static) produced?
          If not, can you point me to an open source framework that can be used to enable C applications to communicate with JMS servers?
          I have HP-UX server that has both C and Java compilers (Java 1.5).

The JMS C client is a pre-compiled library - we don't supply the source - so C applications link to it. If I recall correctly, there is an HP version. The C client library is actually thin layer that uses JNI to directly invoke a Java JMS client running in an embedded JVM.
          The library might work with other vendor's Java JMS clients, but BEA does not officially support this usage.
          Tom

9.4.1 update: can not open an other library from an another computer with same update !!

new iphoto 9.4.1 update: can not open an other library from my second computer with same update !
this always worked properly on iphoto before ! reorganize my photo library from my other computer will break my neck !
the first library from my first computer works ! thanks for help !! regards

So you have two identical copies of the iPhoto library on two different machines? YES
and again How does the option launch and using the select library command not work ->
it simply does not accept the copy of the imac library . if i want to choose the library, it is not accepted to be chosen.
so i tried over network to choose the other way round as you suggested (labtop library on the imac) and it worked , but it ruined (as i thought) my original library of the imac ! i could restore it from the back up , BUT this is simply strange, i can not find the restored libary of the imac on it´s original place ! it must be hidden somewhere !

Can I use virtual bench to measure/communicate with other device by I2C etc?

Hi,
Can I use vitrual bench to measure I2C/SPI/CAN by digital I/O or logic analyzer?
And is it possible using digital I/O to communicate with other device by I2C etc?
Thanks,
Jimmy

You might be able to get it to work (not sure how fast the DIO on the Virtual Bench can go), but for I2C, I would recommend using something that is actually meant for it, like the USB-8451 or USB-8452.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Can I use I-Web with other hosting service? (ie not .Mac?)

HI,
I would like to know if I HAVE to subscribe to .Mac in order to use I-web or can I use my other hosting service to build a snaps website.
It seems that one is bound to sue .Mac, but was not sure if this is the case.
Rebecca

Yes you can. You will need an FTP program. I downloaded one called Cyberduck that seems to do the job. You can drag and drop individual files or several at once to upload. You will need a host for your domain such as 1and1.com. They give you a user name and password you will need to log on to your site. Good luck!

Computer Can't Communicate With Printer

Hi,
After installing Win 8.1 on two different computers, both have the same printing problem.
The first problem that appears is "Bidirectional Support" must be enabled... It was enabled in Win 8 prior to the upgrade...
It took awhile to figure out how to enable it, as after every attempt to check the box, the check would disappear after closing and reopening the window.
It turns out that this won't work with the printer connected. After disconnecting the printer the setting will stick, and when the printer is reconnected it stays that way...
Unfortunately this doesn't resolve the problem... Now I get the error that the computer "Can't Communicate With The Printer"
Attempts to reinstall the software\drivers have been for the most part useless... Even after removing the printer in Devices and Printers and uninstalling the software\drivers, the Driver installer insists that the drivers are still installed and will only
"Update" them, or "Install Another Copy"... neither of which resolves the problem...
On one occasion, I was able to get a complete install, but only after doing a search through the Registry and Deleting everything that came up concerning the printer... This still didn't resolve the problem.
On one machine, after doing this, the Print Spooler would hang and run the CPU at 50% indefinitely. After playing around awhile, I found that if I turned off the Print Spooler in "Services" while it was doing this, and then restart it, the file
would actually print properly...
I have checked the settings in Windows Firewall, and everything for the printer is "Allowed". I even turned the Firewall off to no effect...
This is a Lexmark X5340 USB inkjet printer that works perfectly on the same machines when running Win 7 or Win 8 with all the same connections, software, drivers, and etc....
Is there something different with Win 8.1 than Win 8 concerning printers?

Hi,
I wanted to let you know that I've stumbled upon a way to get the Lexmark software\drivers to reinstall on the Win 8 to 8.1 Upgrade...
It has to do with the Print Spooler interfering with the uninstall\reinstall process. I had read about a recommendation to turn off the Print Spooler before uninstalling the software quite some time ago, and I had tried that, but it didn't work. Here are
the tricks to get it to work if it isn't too late for you.
Note: Bidirectional Support is needed, and for some reason the upgrade process turns it off. This may also be related to the Print Spooler....
1) Turn on and hook up your printer... This needs to be done just this one time to get it to show up in Devices and Printers.... Otherwise, all I get with my machine is the Lexmark Fax, and as a result, you can't "Remove" the printer.
2) Once the printer is visible in Devices and Printers, unhook it..
3) "REMOVE" the Lexmark Printer and Lexmark Fax (if you have one) in Devices and Printers.
4) Stop the Print Spooler in "Services"
5) Uninstall the software\drivers... In the process of doing this, I got a popup Security message from Windows Firewall concerning "Allowing" Printer Communication... I selected "Allow".
6) At the prompt from the Lexmark uninstaller, Reboot.
7) After rebooting, stop the Print Spooler again.
8) Reinstall software\drivers... I used both XP SP3 and Vista Compatibility Mode on different attempts, and both worked... Hook the printer back up when prompted by the installer.
9) Unhook the printer again and reboot. Bidirectional Support must be Enabled, and the setting won't stick if the printer is hooked up.. You need to reboot to clear things up before the next step.
10) Enable Bidirectional Support and Reboot. To do this, go to Devices and Printers and select "Printer Properties" and then the "PORTS" tab... The check box is near the bottom.
11) Set any Printer Preferences you use, if any, and it's ready to go.
I just noticed that when I right click on the Lexmark Preferences, Properties, etc., it is showing two of them for some reason. I don't remember that happening the first time I tried this, but I might have missed it.
I'll need to investigate that a bit.
EDIT... It seems the second printer doesn't show up until after Enabling Bidirectional Support...
I guess that makes a little bit of sense... two printers for two directions.
Thanks for the info. I found it was necessary to change the print spooler. You will also need to set another service that is used during printing that provides screen interaction for the print spooler. Make both of them automatic.

In the latest iOS updates, did Apple change the way Airplay communicate with other devices through Wifi?

Short :
In the latest iOS updates, did Apple change the way Airplay communicate with other devices through Wifi?
Detailed:
We had a glitch with our Apple TV 3A 3-4 weeks ago and had to factory reset it (we reconfigured it with the exact same configuration than before the crash), it's now running iOS 7.0.2, I can't saw which version it ran before the problem though.
It's used in a business environment with 30+ iPads 2, half of them are updated to 8.1.1 and the other half to 8.1.2. We use the latest iTunes version.
Before the glitch that required a reset, all the iPads were detecting and mirroring when needed to the Apple TV, but now the iPads don't see the Apple TV in their list of Airplay devices anymore (but they detect various other devices inside our network).
I have to add that our Apple TV is able to navigate the movie store correctly, so I assume that it's not an internet restriction issue from our end (also, the APple TV do not see either any of the many iPads on its device-detection screen.
We successfully connected an iPhone 5S and an iPhone 6 through P2P Airplay, so it's not the issue, but when we connected the iPhones to our Wifi network (Same as all the other devices are using) the Apple TV suddenly disappeared from the choices.
Hence the reason why I inquire to the possibility that some changes were made in one of the latest iOS revisions, if so, we would require some details so we can adjust our Wifi configuration accordingly to allow the proper detection of devices.
P.S. I tried the basic troubleshooting of Airplay problems with no avail. Airplay button is displaying on the control panel, Airplay do not show the Apple TV at all (so it's not either the trick to display the Mirroring button), we also already proceeded to the suggested devices reboots, so my issue is quite more complex I believe.
Thanks in advance.

PhotogYogi wrote:
I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it.

My Safari can't communicate with iPhoto-.anyone know why??

When sending a photo to iPhoto... I get a box telling me that Safari can't communicate with iPhoto... Does anyone know why and how to fix this??

All photo's?
Photo's from specific websites?
Seriously need to upgrade that mac to mavericks already btw. you can do that here, https://itunes.apple.com/us/app/os-x-mavericks/id675248567?mt=12

I'm getting an error message saying that "iChat can't communicate with the AIM account __"

I'm getting an error message saying that "iChat can't communicate with the AIM account __" I don't know what to do because google.com isn't coming up either...Please help!

Hi,
For any AIM valid Name (AIM, @mac.com or MobileMe) go to the IChat Menu > Preferences > Accounts
Select the account in the list then in the Server Settings tab change the port from 5190 to 443
Also try it without the SSL option.
(Go to the Account info tab to select the Use this Account option to Log in).
Do you mean you have a GoogleTalk account of some kind ?
One based on Google Mail accounts (@gmail.com or @googlemail.com) should have talk.google.com listed as the server in iChat (Server Settings for your Google Account)
There are Other Google accounts (Non Email) that can have Talk Enabled and these do connect to a server called google.com
Both these forms login to the Jabber servers involved on port 5223 and use SSL
It is possible with Google though to also change this to port 443.
(Other Jabber servers will not allow it)
8:20 PM Friday; June 3, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Why my MDM Server can only communicate with ipads and iphones with logging Junos sslvpn.

Why my MDM Server can only communicate with ipads and iphones when either of the iPhone or iPad Junos sslvpn? Any ideas
Our iPad and iPhones users have to log in to Junos SSLVPN to be able to communicate with our MDM Server (via wi-fi). Any ideas where users don't have to log in to Junos SSLVPN?

This bothers me so much. It is absolutely ridiculous. I use my Apple ID as well as a family member's Apple ID to download music.
Every once in a while I will purchase a song and it won't download correctly or will give me an error that my computer is not authorized, a solution I usually fix by deleting and redownloading the song from the cloud. This doesn't work, however, when it happens to both accounts within 90 days.
It is incredibly frustrating to me that I have paid for a song, it downloaded incorrectly, and I must wait 90 days to try downloading it again because of these assinine policies.

Can't communicate with youtube

So the apple TV for me has been working pretty well, no problems really. About 2-3 days back, suddenly I start getting an error every time I try to use YOUTUBE. It keeps saying the apple TV can't communicate with YOUTUBE. Anyone know how to fix this?

Hi, LPUAdit.
Thank you for visiting Apple Support Communities.
I understand that you are unable to connect to YouTube on your Apple TV. Here are some troubleshooting steps that may help resolve this issue.
Resolve network or streaming issues
Troubleshoot Wi-Fi networks and connections.
Switch between wired and wireless networks.
Learn how to resolve issues streaming content from third-party content providers. Learn more about third-party content providers.
Apple TV: Basic troubleshooting
Cheers,
Jason H.

Can't communicate with other hosts from primary domain.

Similar Messages

Maybe you are looking for