Can´t communicate with the primary DNS Server 200.49.156.5: and now?

Hi,
I have connected a Sony Vaio with a Linksys WRT54G router, using broadband cable provided by a Motorola Surfboard Modem (model 5b5100i)
I followed all the steps from the router´s CD.
Finally I connected a network cable to the port 1 of the router and on the other extreme the Motorola Modem is now connected. As result, since I  have a desktop already connected to the modem, there are now 2 connections on the back of the motorola modem, 1 for a desktop that uses its USB plug and a 2nd, which uses a network cable (ethernet connection) and that plugs at the end to the Linksys router. connection is ok based on the Linksys CD.
The wireless card of 2 different laptops recognize the router´s signal, but no internet copnnection is available. 
after diagnostic on network problems by Vista Windows, I receive the following message
¨"Cannot communicate with the primary DNS Server 200.49.156.5"
What does it mean? what needs to be set in order to make it work?
Thanks in advance for any help

I talked to a tech support form my cable company and the motorola only provides 1 IP address, therefore, in order to make a router work (it will need its own IP address, a 2nd one), you need to buy an ADDITIONAL internet connection or access point....this company is in Argentina. While I lived in the US (last month) they allowed me to have multiple computers from the same one connection.
bottom line, calll your ISP and tell them you need either to install the router on your connection OR to have an additional internet cable input....
just my 2 cents...business rules.

Similar Messages

  • Messages can't communicate with the account "AIM." Cannot log in to AIM. General error. Try again

    Hi,
    For the first time today, I've been having problems connecting to AIM using Messages. I get the "Messages can't communicate with the account "AIM." Cannot log in to AIM. General error. Try again." error. I looked at the forums here and I tried deleting my account, restarting my computer, reinstalling the account but to no avail. I've been using messages and mountain lion for a few weeks and never had a problem with connecting to AIM until now. Any help is greatly appreciated!

    uncheck SSL in server settings....done deal.  Funny part is I was having the same problem...went to genius bar...they couldnt figure it out...told me to call apple support.  Did that...they told me to re install software after an hour of trying to figure it out...that didnt work either.
    amazing the info you can get thru forums.!

  • I'm getting an error message saying that "iChat can't communicate with the AIM account __"

    I'm getting an error message saying that "iChat can't communicate with the AIM account __" I don't know what to do because google.com isn't coming up either...Please help!

    Hi,
    For any AIM valid Name (AIM, @mac.com or MobileMe) go to the IChat Menu > Preferences > Accounts
    Select the account in the list then in the Server Settings tab change the port from 5190 to 443
    Also try it without the SSL option.
    (Go to the Account info tab to select the Use this Account option to Log in).
    Do you mean you have a GoogleTalk account of some kind ?
    One based on Google Mail accounts (@gmail.com or @googlemail.com) should have talk.google.com listed as the server in iChat (Server Settings for your Google Account)
    There are Other Google accounts (Non Email) that can have Talk Enabled and these do connect to a server called google.com
    Both these forms login to the Jabber servers involved on port 5223 and use SSL
    It is possible with Google though to also change this to port 443.
    (Other Jabber servers will not allow it)
    8:20 PM      Friday; June 3, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
     Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • IChat can't communicate with the AIM account error window! please help!

    Hello, I have been trying to connect to my AIM account via iChat and for some reason it doesn't let me. A window saying the following appears:
    "iChat can't communicate with the AIM account "name of account".
    "An undefined AIM socket error has occurred."
    Please help with this. What is going on?

    Hi,
    An @Mac.com name is a valid AOL/AIM Screen Name.
    Any Issues and the AIM servers will say the AOL/AIM name or password is incorrect.
    As I said earlier, there can be issues if when you create an @Mac.com or even a MobileMe account Apple lets you create passwords of up to 20 characters (I think).
    The issues is the AIM Server can check the name with Apple but don't parse Passwords that have more then 16 characters (You have to change the Password to 16 characters or less).
    There is also another issue.
    Creating a Name at the @Mac.com page allows you to use spaces as valid characters (As In ralph [email protected]) but again the AIM servers cannot parse these names as Spaces are not Valid at AIM
    Use iForgot to check the name. You can also change passwords via this.
    Use the On Line option and answer the security questions.
    That should confirm whether the account/Screen Name/Apple ID works.
    Then go to this page https://settings.aim.com/
    Use the Sign In option top right.
    Enter your @mac.com name and password (It will read AOL at the next page to do that)
    If it works properly then you should be returned to the page I linked you to but it will now have your Screen Name showing above the menu area.
    This will confirm that the @Mac.com name is accepted as a AIM Screen Name.
    If you are still having issues, go to the iChat Menu > Preferences > Accounts
    In the Account Info tab make sure you are logged out (Deselect "Use this Account")
    Go to the Server settings tab
    Change the port from 5190 to 443 (it may also pay to deselect SSL)
    Log back in again.
    Deleting com.apple.ichat.AIM.plist may help.
    If the issue is an incorrect password you may need to delete the entry from the KeyChain (Use KeyChain Access in the Applications/Utilities folder)
    Hope this helps.
    9:33 PM Thursday; March 10, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • IChat can't communicate with the Jabber account

    Got the instructions for "Configuring iChat for Google Talk" from Google at:
    http://www.google.com/support/talk/bin/answer.py?answer=24076
    But after adding my Gmail info. I keep getting this error message:
    iChat can't communicate with the Jabber account "[email protected]"
    Anybody out there come across this and solved this sucker?
    THANKS

    Hi,
    You have entered the account info as a Jabber Name and not chosen the Google option
    With iChat Open go to the iChat Menu > Preferences > Accounts
    Click on the Plus Button at the bottom of the List.
    In the top item in the new pane Choose GoogleTalk.
    Add your ID exactly as it appears when you Log in to the Web Mail page at Google  (Mail seems to except either ending, @google.com or @gmail.com but the Google Talk server does not)
    Enter in the password
    Click the Done button
    You should now have  Buddy List that Logs On
    In the Account list in iChat you will now have at least three Accounts Listed (the faulty one, the new one and Bonjour)
    If you then check the Server Setting tab/button on both the "google" accounts you will find the new one says the server in talk.google.com
    The other will use the last part of your ID  (in your case you entered a name/ID ending @gmail.com).
    The reason for your confusion is that those Google Instructions are for iChat 3
    You have "Missed" the bit about changing the Server Name in the Server Setting tab to talk.google.com as in fact you can add it as a Jabber account and then change the server name the same way.
    You could change the server info in the "old" account or you can highlight it the list then press the minus button to Delete it.
    One other thing.
    It is important that Talk is Enabled in your everyday Google Account Setting (Not the mail ones).
    This does add the Chat option to the Mail Web page and of course allows iChat to use the GoogleTalk servers.
    I have several Jabber Accounts including Google as well as several AIM valid Logins.
    I don't find the Google servers go Off line or drop connections any more (Nowadays) than the AIM ones or other Jabber servers.
    9:21 PM      Monday; May 23, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
     Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously
    Message was edited by: Ralph Johns (UK)

  • "iChat can't communicate with the jabber account, disconnected unexpectedly"

    We are running a Snow Leopard server here in the office, but no one can connect to iChat with their given jabber id. I have tried manually putting the settings in, I have tried letting the computer configure them itself [through system preferences -> accounts -> login options and choosing the networked server], and I have gone through the manuals. I have gone into the server itself and made sure everything is on and functioning, but it just won't connect. I keep getting the same message. I'm guessing there's some small setting that I don't have set right, I'm just not sure what it is and don't even know where to start looking.
    "iChat can't communicate with the Jabber account "[email protected]". Disconnected unexpectedly"
    I've looked through the community and none of the given directions have helped.  I posted on the iChat section, but they suggested I post here. Can anyone out there help me out? We're a small design studio, so we don't have an IT person to do this for me.
    Thanks,
    Gretchen

    No, I know, you always have to assume the other person knows nothing   Okay, through some finagling, I managed to save the log to the server, copy it to my computer from there, and now can copy and paste in here. This is all that was in there at this point:
    3)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'disco-publish' added to chain 'user-load' (order 4 index 19 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'vacation' added to chain 'user-load' (order 5 index 4 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'active' added to chain 'user-create' (order 0 index 20 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'template-roster' added to chain 'user-create' (order 1 index 22 seq 0)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'active' added to chain 'user-delete' (order 0 index 20 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'announce' added to chain 'user-delete' (order 1 index 11 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'disco-publish' added to chain 'user-delete' (order 2 index 19 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'offline' added to chain 'user-delete' (order 3 index 10 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'privacy' added to chain 'user-delete' (order 4 index 2 seq 4)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'roster' added to chain 'user-delete' (order 5 index 3 seq 3)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'vacation' added to chain 'user-delete' (order 6 index 4 seq 3)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'iq-last' added to chain 'user-delete' (order 7 index 0 seq 3)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'iq-private' added to chain 'user-delete' (order 8 index 7 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'iq-vcard' added to chain 'user-delete' (order 9 index 5 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: version: jabberd sm 2.1.24.1-326.6
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: attempting connection to router at 127.0.0.1, port=5347
    Jan  6 11:53:52 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61278] connect
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'announce' added to chain 'pkt-sm' (order 6 index 11 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'help' added to chain 'pkt-sm' (order 7 index 17 seq 0)
    Jan  6 11:53:52 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61278] authenticated as jabberd
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'echo' added to chain 'pkt-sm' (order 8 index 18 seq 0)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'roster' added to chain 'pkt-user' (order 0 index 3 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'presence' added to chain 'pkt-user' (order 1 index 12 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'iq-vcard' added to chain 'pkt-user' (order 2 index 5 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'amp' added to chain 'pkt-user' (order 3 index 9 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'deliver' added to chain 'pkt-user' (order 4 index 13 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/s2s[98312]: connection to router established
    Jan  6 11:53:52 marquardtplus jabberd/router[98308]: [s2s] set as default route
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'vacation' added to chain 'pkt-user' (order 5 index 4 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/router[98308]: [s2s] online (bound to 127.0.0.1, port 61276)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'offline' added to chain 'pkt-user' (order 6 index 10 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/s2s[98312]: [::, port=5269] listening for connections
    Jan  6 11:53:52 marquardtplus jabberd/s2s[98312]: ready for connections
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'disco-publish' added to chain 'pkt-user' (order 7 index 19 seq 0)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'iq-last' added to chain 'pkt-user' (order 8 index 0 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'session' added to chain 'pkt-router' (order 0 index 14 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'disco' added to chain 'pkt-router' (order 1 index 8 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'active' added to chain 'user-load' (order 0 index 20 seq 0)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'roster' added to chain 'user-load' (order 1 index 3 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'roster-publish' added to chain 'user-load' (order 2 index 21 seq 0)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'privacy' added to chain 'user-load' (order 3 index 2 seq 3)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'disco-publish' added to chain 'user-load' (order 4 index 19 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'vacation' added to chain 'user-load' (order 5 index 4 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'active' added to chain 'user-create' (order 0 index 20 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'template-roster' added to chain 'user-create' (order 1 index 22 seq 0)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'active' added to chain 'user-delete' (order 0 index 20 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'announce' added to chain 'user-delete' (order 1 index 11 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'disco-publish' added to chain 'user-delete' (order 2 index 19 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'offline' added to chain 'user-delete' (order 3 index 10 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'privacy' added to chain 'user-delete' (order 4 index 2 seq 4)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'roster' added to chain 'user-delete' (order 5 index 3 seq 3)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'vacation' added to chain 'user-delete' (order 6 index 4 seq 3)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'iq-last' added to chain 'user-delete' (order 7 index 0 seq 3)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'iq-private' added to chain 'user-delete' (order 8 index 7 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'iq-vcard' added to chain 'user-delete' (order 9 index 5 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: version: jabberd sm 2.1.24.1-326.6
    Jan  6 11:53:52 marquardtplus jabberd/c2s[98309]: connection to router established
    Jan  6 11:53:52 marquardtplus jabberd/router[98308]: [c2s] online (bound to 127.0.0.1, port 61277)
    Jan  6 11:53:52 marquardtplus jabberd/c2s[98309]: [::, port=5222] listening for connections
    Jan  6 11:53:52 marquardtplus jabberd/c2s[98309]: ready for connections
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: attempting connection to router at 127.0.0.1, port=5347
    Jan  6 11:53:52 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61279] connect
    Jan  6 11:53:52 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61279] authenticated as jabberd
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: connection to router established
    Jan  6 11:53:52 marquardtplus jabberd/router[98308]: [marquardtplus-server.local] online (bound to 127.0.0.1, port 61278)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: ready for sessions
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: connection to router established
    Jan  6 11:53:52 marquardtplus jabberd/router[98308]: [marquardtplus.private] online (bound to 127.0.0.1, port 61279)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: ready for sessions
    Jan  6 11:53:52 marquardtplus servermgrd[81]: servermgr_jabber[N]: jabberd service startup completed.
    Jan  6 11:53:53 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61284] connect
    Jan  6 11:53:53 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61284] authenticated as conference.marquardtplus.private
    Jan  6 11:53:53 marquardtplus jabberd/router[98308]: [conference.marquardtplus.private] online (bound to 127.0.0.1, port 61284)
    Jan  6 11:53:53 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61285] connect
    Jan  6 11:53:53 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61285] authenticated as pubsub.marquardtplus.private
    Jan  6 11:53:53 marquardtplus jabberd/router[98308]: [pubsub.marquardtplus.private] online (bound to 127.0.0.1, port 61285)
    Jan  6 11:53:53 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61286] connect
    Jan  6 11:53:53 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61286] authenticated as proxy65.marquardtplus.private
    Jan  6 11:53:53 marquardtplus jabberd/router[98308]: [proxy65.marquardtplus.private] online (bound to 127.0.0.1, port 61286)
    Jan  6 11:53:54 marquardtplus jabberd/resolver[98305]: attempting connection to router at 127.0.0.1, port=5347
    Jan  6 11:53:54 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61289] connect
    Jan  6 11:53:54 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61289] authenticated as jabberd
    Jan  6 11:53:54 marquardtplus jabberd/resolver[98305]: connection to router established
    Jan  6 11:53:54 marquardtplus jabberd/router[98308]: [resolver] online (bound to 127.0.0.1, port 61289)
    Jan  6 11:53:54 marquardtplus jabberd/resolver[98305]: ready to resolve
    Jan  6 11:53:58 marquardtplus jabberd/c2s[98309]: [7] [::ffff:192.168.1.132, port=61291] connect
    Jan  6 11:53:58 marquardtplus jabberd/c2s[98309]: [7] SASL authentication succeeded: mechanism=DIGEST-MD5; [email protected]
    Jan  6 11:53:58 marquardtplus jabberd/c2s[98309]: od_auth_check_service_membership: checking user "com.apple.notificationuser" access for service "chat"
    Jan  6 11:53:58 marquardtplus jabberd/c2s[98309]: od_auth_check_service_membership: mbr_check_service_membership returned 0
    Jan  6 11:53:58 marquardtplus jabberd/c2s[98309]: od_auth_check_service_membership: user "com.apple.notificationuser" is authorized to access service "chat"
    Jan  6 11:53:58 marquardtplus jabberd/c2s[98309]: [7] bound: [email protected]/icalserver.9c433d7eee6b45a 481f8d560b46ca943
    Jan  6 11:53:58 marquardtplus jabberd/sm[98306]: session started: [email protected]/icalserver.9c433d7eee6b45a 481f8d560b46ca943
    The only users I've tried to log on so far are [email protected] [myself] and [email protected], both got the same issue.
    If there's anything else I can provide, I will happily do so.
    Thanks,
    Gretchen

  • IChat can't communicate with the Aim account

    Recently, my iChat AV stopped working, displaying a message iChat can't communicate with the Aim account "xxxxxxxxx". None Time
    I have been able to successfully log on with other accounts using the application.
    I have tried the 443 port switch and the firewall technique.
    This problem may coincide with my use of an aim importer client on facebook
    I have since severed all ties between the aim account and the facebook account
    I have tried using Adium and aim express but to no avail.
    Aim express consistently displays the message saying that I have attempted to log on too many times and to try again, even after I restart the computer and wait half an hour.
    Any help would be much appreciated.
    Thanks

    Hi,
    Welcome to the    Discussions
    Umm, Sounds like an issue created by trying to unhook Facebook from AIM.
    Try filling in this page and see if it helps
    http://www.aim.com/suspended_account/report.adp
    You will not get a reply and it may still take a day or two.
    10:20 PM Thursday; September 16, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • HT201328 how can i removed/unlocked the passcode of my iPhone? i forgot and now can't open my cel anymore

    how can i removed/unlocked the passcode of my iPhone? i forgot and now can't open my cel anymore?...thank you:-)

    Do as the manaul tells you to do and restore the iphone

  • Can't communicate with the standby IP

    I can no longer communicate with the standby IP address configured on the inside interface of a secondary ASA5510. Just a couple days ago I could snmp, http, ssh, and ping it.
    From the switch that is directly connected to the inside interface I'm getting unexpected results when viewing the the arp table. The switch is saying the IP address associated with the ASA's inside interface has mac address 0023.3353.bcc8 but the ASA is saying its inside interface mac address is 0023.33bb.8362
    Furthermore when I issue the "sh mac address-table interface f5/46" command on the switch i see multiple macs on the interface that is connected to the inside interface of the ASA...
    Unicast Entries
    vlan   mac address     type        protocols               port
    -------+---------------+--------+---------------------+--------------------
    135    0023.3353.bcc8   dynamic ip                    FastEthernet5/46     
    135    0023.3353.bdc8   dynamic ip                    FastEthernet5/46     
    135    0023.3353.bec8   dynamic ip                    FastEthernet5/46     
    135    0023.3353.bfc8   dynamic ip                    FastEthernet5/46     
    Thanks,
    James

    Hi Bro
    Maybe the 5/46 has been configured as a trunk port? Could you paste your switch and FW config here, so that everyone here can assist you.

  • I can not communicate with the FP-1000, using the serial port.

    FP-100 communication by serial port.
    My problem is the communication with the interface FP-1000, I haven been using it for two month with my program application and suddenly it stopped to work. I tried to use the FieldPoint Explorer to communicate using its last configuration but it does not work. I have tried to configure again and the FieldPoint Explorer doe not find any module, also I have seen that the network and access LEDs don lit when I am trying to communicate with the FP-1000.
    I have checked all connection and they are already, the FP-1000 turn on, and the status LEDs does not lit.
    I guess the trouble is the RS-323 connector at the FP-1000.
    Could you tell how can I solve this problem?

    Hello,
    There are a number of things that you can try when you are experiencing communication problems with a FP-1000.
    First, double-check that the serial port that you are using is the same one that you are specifying in FieldPoint Explorer. Try using another serial port on the host computer. Try connecting the FP-1000 to another computer.
    Make sure that you have FieldPoint Explorer version 3.0.2 or later. Free upgrades are available from the web.
    I hope this helps,
    Chad Evans

  • I am getting  an error message when trying to burn pictures to a dvd rw, and it says the disc can't communicate with the drive?

    I am trying to burn some wedding pictures to a blank dvd rw.  I keep getting an error message that says the drive and the disc can't communicate.  I have run a repair disc and repair disc permissions, restarted my laptop, and still get the error.  What else can I do?

    Hi sheryl525,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots.
    Apple Computers: Troubleshooting the slot-loading SuperDrive
    http://support.apple.com/kb/HT2801#
    Cheers,
    - Judy

  • IChat 5.0 and "can't communicate with the AIM account

    Works fine with AIM software, just stays disconnected in iChat
    Message also says "the server did not respond. Please try again.
    Any help would be appreciated!

    Hi,
    Do you mean you can not log in your AIM name in iChat ?
    Change the Port in Server setting to 443.
    in iChat 5 SSL has to be On first the change the port and Press Enter to "Set"
    SSL can now be turned Off if your want.
    10:24 PM Wednesday; September 16, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • For 3 years my iMac and miniMac both communicated with a Canon printer and the internet using an Airport Extreme.  Last winter, the miniMac lost printing via the Airpor and now can't communicate with the network at all.

    For three years my iMac and Mac mini were networked via Airport Extreme with a printer and the internet.  More recently, I added an iMac and iPhone.   PROBLEMS:  A few months ago the Mac mini lost its connection to  the printer, and now it cannot locate the network at all. 

    If you use the extreme as a router then the tc should be connected via its wan port to one of the lan ports on the extreme. Tc should be set up in bridge mode. Basically you could set it up to create another wireless network beside the one created by the extreme. There is no need to use WDS or extend the other network.
    Use the same SSID and password for both machines. Computers will connect to the strongest signal.

  • HT1150 I have an iBook G4.  My epson stylus printer is not fixable so I went to Best Buy and bought an XP400.  It is all set up but I can't get  the printer to communicate with the computer.  Have tried everything I know and it won't work.  Any ideas?

    I have an iBook G4.  My epson stylus printer is not fixable so I went to Best buy and bought an XP 400 (Epson).  When I went to set it up it wouldn't talk to my computer.  So it looks great but won't print   After 2 days and many phone calls I am disgruntled to say the least.  Any  suggestions?

    I would imagine the drivers supplied with the printer will not be compatible with your existing operating system.
    Download the older drivers for your OS here, and then try the install again.
    Epson Print Drivers

  • My sister synced the ipad2 with the laptop of a random friend of her, and now lots of apps don't work.

    She made That cause se Wanted to insert some music, before that, i've never synced the iPad with any device.
    Some apps works, except the bjork's biophilia app suite, and many others That i've bought. I cant't loose some of my progress in some games, That worls be sad. Ah and now i can'tsign out from the e Mail account of my sister's friend when i enter to the Mail button.
    I tried downloading new free apps from the app store and them works, but the others just don't.
    Can some doy help me?
    Excuse my bad ortography. I don't talk english a lot.

    settings->store apply the appleID the apps were bought with

Maybe you are looking for