Can't communicate with the standby IP
I can no longer communicate with the standby IP address configured on the inside interface of a secondary ASA5510. Just a couple days ago I could snmp, http, ssh, and ping it.
From the switch that is directly connected to the inside interface I'm getting unexpected results when viewing the the arp table. The switch is saying the IP address associated with the ASA's inside interface has mac address 0023.3353.bcc8 but the ASA is saying its inside interface mac address is 0023.33bb.8362
Furthermore when I issue the "sh mac address-table interface f5/46" command on the switch i see multiple macs on the interface that is connected to the inside interface of the ASA...
Unicast Entries
vlan mac address type protocols port
-------+---------------+--------+---------------------+--------------------
135 0023.3353.bcc8 dynamic ip FastEthernet5/46
135 0023.3353.bdc8 dynamic ip FastEthernet5/46
135 0023.3353.bec8 dynamic ip FastEthernet5/46
135 0023.3353.bfc8 dynamic ip FastEthernet5/46
Thanks,
James
Hi Bro
Maybe the 5/46 has been configured as a trunk port? Could you paste your switch and FW config here, so that everyone here can assist you.
Similar Messages
-
Messages can't communicate with the account "AIM." Cannot log in to AIM. General error. Try again
Hi,
For the first time today, I've been having problems connecting to AIM using Messages. I get the "Messages can't communicate with the account "AIM." Cannot log in to AIM. General error. Try again." error. I looked at the forums here and I tried deleting my account, restarting my computer, reinstalling the account but to no avail. I've been using messages and mountain lion for a few weeks and never had a problem with connecting to AIM until now. Any help is greatly appreciated!uncheck SSL in server settings....done deal. Funny part is I was having the same problem...went to genius bar...they couldnt figure it out...told me to call apple support. Did that...they told me to re install software after an hour of trying to figure it out...that didnt work either.
amazing the info you can get thru forums.! -
I'm getting an error message saying that "iChat can't communicate with the AIM account __"
I'm getting an error message saying that "iChat can't communicate with the AIM account __" I don't know what to do because google.com isn't coming up either...Please help!
Hi,
For any AIM valid Name (AIM, @mac.com or MobileMe) go to the IChat Menu > Preferences > Accounts
Select the account in the list then in the Server Settings tab change the port from 5190 to 443
Also try it without the SSL option.
(Go to the Account info tab to select the Use this Account option to Log in).
Do you mean you have a GoogleTalk account of some kind ?
One based on Google Mail accounts (@gmail.com or @googlemail.com) should have talk.google.com listed as the server in iChat (Server Settings for your Google Account)
There are Other Google accounts (Non Email) that can have Talk Enabled and these do connect to a server called google.com
Both these forms login to the Jabber servers involved on port 5223 and use SSL
It is possible with Google though to also change this to port 443.
(Other Jabber servers will not allow it)
8:20 PM Friday; June 3, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.7)
Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
IChat can't communicate with the AIM account error window! please help!
Hello, I have been trying to connect to my AIM account via iChat and for some reason it doesn't let me. A window saying the following appears:
"iChat can't communicate with the AIM account "name of account".
"An undefined AIM socket error has occurred."
Please help with this. What is going on?Hi,
An @Mac.com name is a valid AOL/AIM Screen Name.
Any Issues and the AIM servers will say the AOL/AIM name or password is incorrect.
As I said earlier, there can be issues if when you create an @Mac.com or even a MobileMe account Apple lets you create passwords of up to 20 characters (I think).
The issues is the AIM Server can check the name with Apple but don't parse Passwords that have more then 16 characters (You have to change the Password to 16 characters or less).
There is also another issue.
Creating a Name at the @Mac.com page allows you to use spaces as valid characters (As In ralph [email protected]) but again the AIM servers cannot parse these names as Spaces are not Valid at AIM
Use iForgot to check the name. You can also change passwords via this.
Use the On Line option and answer the security questions.
That should confirm whether the account/Screen Name/Apple ID works.
Then go to this page https://settings.aim.com/
Use the Sign In option top right.
Enter your @mac.com name and password (It will read AOL at the next page to do that)
If it works properly then you should be returned to the page I linked you to but it will now have your Screen Name showing above the menu area.
This will confirm that the @Mac.com name is accepted as a AIM Screen Name.
If you are still having issues, go to the iChat Menu > Preferences > Accounts
In the Account Info tab make sure you are logged out (Deselect "Use this Account")
Go to the Server settings tab
Change the port from 5190 to 443 (it may also pay to deselect SSL)
Log back in again.
Deleting com.apple.ichat.AIM.plist may help.
If the issue is an incorrect password you may need to delete the entry from the KeyChain (Use KeyChain Access in the Applications/Utilities folder)
Hope this helps.
9:33 PM Thursday; March 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
IChat can't communicate with the Aim account
Recently, my iChat AV stopped working, displaying a message iChat can't communicate with the Aim account "xxxxxxxxx". None Time
I have been able to successfully log on with other accounts using the application.
I have tried the 443 port switch and the firewall technique.
This problem may coincide with my use of an aim importer client on facebook
I have since severed all ties between the aim account and the facebook account
I have tried using Adium and aim express but to no avail.
Aim express consistently displays the message saying that I have attempted to log on too many times and to try again, even after I restart the computer and wait half an hour.
Any help would be much appreciated.
ThanksHi,
Welcome to the Discussions
Umm, Sounds like an issue created by trying to unhook Facebook from AIM.
Try filling in this page and see if it helps
http://www.aim.com/suspended_account/report.adp
You will not get a reply and it may still take a day or two.
10:20 PM Thursday; September 16, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
IChat can't communicate with the Jabber account
Got the instructions for "Configuring iChat for Google Talk" from Google at:
http://www.google.com/support/talk/bin/answer.py?answer=24076
But after adding my Gmail info. I keep getting this error message:
iChat can't communicate with the Jabber account "[email protected]"
Anybody out there come across this and solved this sucker?
THANKSHi,
You have entered the account info as a Jabber Name and not chosen the Google option
With iChat Open go to the iChat Menu > Preferences > Accounts
Click on the Plus Button at the bottom of the List.
In the top item in the new pane Choose GoogleTalk.
Add your ID exactly as it appears when you Log in to the Web Mail page at Google (Mail seems to except either ending, @google.com or @gmail.com but the Google Talk server does not)
Enter in the password
Click the Done button
You should now have Buddy List that Logs On
In the Account list in iChat you will now have at least three Accounts Listed (the faulty one, the new one and Bonjour)
If you then check the Server Setting tab/button on both the "google" accounts you will find the new one says the server in talk.google.com
The other will use the last part of your ID (in your case you entered a name/ID ending @gmail.com).
The reason for your confusion is that those Google Instructions are for iChat 3
You have "Missed" the bit about changing the Server Name in the Server Setting tab to talk.google.com as in fact you can add it as a Jabber account and then change the server name the same way.
You could change the server info in the "old" account or you can highlight it the list then press the minus button to Delete it.
One other thing.
It is important that Talk is Enabled in your everyday Google Account Setting (Not the mail ones).
This does add the Chat option to the Mail Web page and of course allows iChat to use the GoogleTalk servers.
I have several Jabber Accounts including Google as well as several AIM valid Logins.
I don't find the Google servers go Off line or drop connections any more (Nowadays) than the AIM ones or other Jabber servers.
9:21 PM Monday; May 23, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.7)
Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images." No, Seriously
Message was edited by: Ralph Johns (UK) -
"iChat can't communicate with the jabber account, disconnected unexpectedly"
We are running a Snow Leopard server here in the office, but no one can connect to iChat with their given jabber id. I have tried manually putting the settings in, I have tried letting the computer configure them itself [through system preferences -> accounts -> login options and choosing the networked server], and I have gone through the manuals. I have gone into the server itself and made sure everything is on and functioning, but it just won't connect. I keep getting the same message. I'm guessing there's some small setting that I don't have set right, I'm just not sure what it is and don't even know where to start looking.
"iChat can't communicate with the Jabber account "[email protected]". Disconnected unexpectedly"
I've looked through the community and none of the given directions have helped. I posted on the iChat section, but they suggested I post here. Can anyone out there help me out? We're a small design studio, so we don't have an IT person to do this for me.
Thanks,
GretchenNo, I know, you always have to assume the other person knows nothing Okay, through some finagling, I managed to save the log to the server, copy it to my computer from there, and now can copy and paste in here. This is all that was in there at this point:
3)
Jan 6 11:53:52 marquardtplus jabberd/sm[98307]: module 'disco-publish' added to chain 'user-load' (order 4 index 19 seq 1)
Jan 6 11:53:52 marquardtplus jabberd/sm[98307]: module 'vacation' added to chain 'user-load' (order 5 index 4 seq 2)
Jan 6 11:53:52 marquardtplus jabberd/sm[98307]: module 'active' added to chain 'user-create' (order 0 index 20 seq 1)
Jan 6 11:53:52 marquardtplus jabberd/sm[98307]: module 'template-roster' added to chain 'user-create' (order 1 index 22 seq 0)
Jan 6 11:53:52 marquardtplus jabberd/sm[98307]: module 'active' added to chain 'user-delete' (order 0 index 20 seq 2)
Jan 6 11:53:52 marquardtplus jabberd/sm[98307]: module 'announce' added to chain 'user-delete' (order 1 index 11 seq 2)
Jan 6 11:53:52 marquardtplus jabberd/sm[98307]: module 'disco-publish' added to chain 'user-delete' (order 2 index 19 seq 2)
Jan 6 11:53:52 marquardtplus jabberd/sm[98307]: module 'offline' added to chain 'user-delete' (order 3 index 10 seq 2)
Jan 6 11:53:52 marquardtplus jabberd/sm[98307]: module 'privacy' added to chain 'user-delete' (order 4 index 2 seq 4)
Jan 6 11:53:52 marquardtplus jabberd/sm[98307]: module 'roster' added to chain 'user-delete' (order 5 index 3 seq 3)
Jan 6 11:53:52 marquardtplus jabberd/sm[98307]: module 'vacation' added to chain 'user-delete' (order 6 index 4 seq 3)
Jan 6 11:53:52 marquardtplus jabberd/sm[98307]: module 'iq-last' added to chain 'user-delete' (order 7 index 0 seq 3)
Jan 6 11:53:52 marquardtplus jabberd/sm[98307]: module 'iq-private' added to chain 'user-delete' (order 8 index 7 seq 1)
Jan 6 11:53:52 marquardtplus jabberd/sm[98307]: module 'iq-vcard' added to chain 'user-delete' (order 9 index 5 seq 2)
Jan 6 11:53:52 marquardtplus jabberd/sm[98307]: version: jabberd sm 2.1.24.1-326.6
Jan 6 11:53:52 marquardtplus jabberd/sm[98307]: attempting connection to router at 127.0.0.1, port=5347
Jan 6 11:53:52 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61278] connect
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'announce' added to chain 'pkt-sm' (order 6 index 11 seq 1)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'help' added to chain 'pkt-sm' (order 7 index 17 seq 0)
Jan 6 11:53:52 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61278] authenticated as jabberd
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'echo' added to chain 'pkt-sm' (order 8 index 18 seq 0)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'roster' added to chain 'pkt-user' (order 0 index 3 seq 1)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'presence' added to chain 'pkt-user' (order 1 index 12 seq 2)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'iq-vcard' added to chain 'pkt-user' (order 2 index 5 seq 1)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'amp' added to chain 'pkt-user' (order 3 index 9 seq 2)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'deliver' added to chain 'pkt-user' (order 4 index 13 seq 1)
Jan 6 11:53:52 marquardtplus jabberd/s2s[98312]: connection to router established
Jan 6 11:53:52 marquardtplus jabberd/router[98308]: [s2s] set as default route
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'vacation' added to chain 'pkt-user' (order 5 index 4 seq 1)
Jan 6 11:53:52 marquardtplus jabberd/router[98308]: [s2s] online (bound to 127.0.0.1, port 61276)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'offline' added to chain 'pkt-user' (order 6 index 10 seq 1)
Jan 6 11:53:52 marquardtplus jabberd/s2s[98312]: [::, port=5269] listening for connections
Jan 6 11:53:52 marquardtplus jabberd/s2s[98312]: ready for connections
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'disco-publish' added to chain 'pkt-user' (order 7 index 19 seq 0)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'iq-last' added to chain 'pkt-user' (order 8 index 0 seq 2)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'session' added to chain 'pkt-router' (order 0 index 14 seq 1)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'disco' added to chain 'pkt-router' (order 1 index 8 seq 2)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'active' added to chain 'user-load' (order 0 index 20 seq 0)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'roster' added to chain 'user-load' (order 1 index 3 seq 2)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'roster-publish' added to chain 'user-load' (order 2 index 21 seq 0)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'privacy' added to chain 'user-load' (order 3 index 2 seq 3)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'disco-publish' added to chain 'user-load' (order 4 index 19 seq 1)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'vacation' added to chain 'user-load' (order 5 index 4 seq 2)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'active' added to chain 'user-create' (order 0 index 20 seq 1)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'template-roster' added to chain 'user-create' (order 1 index 22 seq 0)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'active' added to chain 'user-delete' (order 0 index 20 seq 2)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'announce' added to chain 'user-delete' (order 1 index 11 seq 2)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'disco-publish' added to chain 'user-delete' (order 2 index 19 seq 2)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'offline' added to chain 'user-delete' (order 3 index 10 seq 2)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'privacy' added to chain 'user-delete' (order 4 index 2 seq 4)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'roster' added to chain 'user-delete' (order 5 index 3 seq 3)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'vacation' added to chain 'user-delete' (order 6 index 4 seq 3)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'iq-last' added to chain 'user-delete' (order 7 index 0 seq 3)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'iq-private' added to chain 'user-delete' (order 8 index 7 seq 1)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: module 'iq-vcard' added to chain 'user-delete' (order 9 index 5 seq 2)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: version: jabberd sm 2.1.24.1-326.6
Jan 6 11:53:52 marquardtplus jabberd/c2s[98309]: connection to router established
Jan 6 11:53:52 marquardtplus jabberd/router[98308]: [c2s] online (bound to 127.0.0.1, port 61277)
Jan 6 11:53:52 marquardtplus jabberd/c2s[98309]: [::, port=5222] listening for connections
Jan 6 11:53:52 marquardtplus jabberd/c2s[98309]: ready for connections
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: attempting connection to router at 127.0.0.1, port=5347
Jan 6 11:53:52 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61279] connect
Jan 6 11:53:52 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61279] authenticated as jabberd
Jan 6 11:53:52 marquardtplus jabberd/sm[98307]: connection to router established
Jan 6 11:53:52 marquardtplus jabberd/router[98308]: [marquardtplus-server.local] online (bound to 127.0.0.1, port 61278)
Jan 6 11:53:52 marquardtplus jabberd/sm[98307]: ready for sessions
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: connection to router established
Jan 6 11:53:52 marquardtplus jabberd/router[98308]: [marquardtplus.private] online (bound to 127.0.0.1, port 61279)
Jan 6 11:53:52 marquardtplus jabberd/sm[98306]: ready for sessions
Jan 6 11:53:52 marquardtplus servermgrd[81]: servermgr_jabber[N]: jabberd service startup completed.
Jan 6 11:53:53 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61284] connect
Jan 6 11:53:53 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61284] authenticated as conference.marquardtplus.private
Jan 6 11:53:53 marquardtplus jabberd/router[98308]: [conference.marquardtplus.private] online (bound to 127.0.0.1, port 61284)
Jan 6 11:53:53 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61285] connect
Jan 6 11:53:53 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61285] authenticated as pubsub.marquardtplus.private
Jan 6 11:53:53 marquardtplus jabberd/router[98308]: [pubsub.marquardtplus.private] online (bound to 127.0.0.1, port 61285)
Jan 6 11:53:53 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61286] connect
Jan 6 11:53:53 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61286] authenticated as proxy65.marquardtplus.private
Jan 6 11:53:53 marquardtplus jabberd/router[98308]: [proxy65.marquardtplus.private] online (bound to 127.0.0.1, port 61286)
Jan 6 11:53:54 marquardtplus jabberd/resolver[98305]: attempting connection to router at 127.0.0.1, port=5347
Jan 6 11:53:54 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61289] connect
Jan 6 11:53:54 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61289] authenticated as jabberd
Jan 6 11:53:54 marquardtplus jabberd/resolver[98305]: connection to router established
Jan 6 11:53:54 marquardtplus jabberd/router[98308]: [resolver] online (bound to 127.0.0.1, port 61289)
Jan 6 11:53:54 marquardtplus jabberd/resolver[98305]: ready to resolve
Jan 6 11:53:58 marquardtplus jabberd/c2s[98309]: [7] [::ffff:192.168.1.132, port=61291] connect
Jan 6 11:53:58 marquardtplus jabberd/c2s[98309]: [7] SASL authentication succeeded: mechanism=DIGEST-MD5; [email protected]
Jan 6 11:53:58 marquardtplus jabberd/c2s[98309]: od_auth_check_service_membership: checking user "com.apple.notificationuser" access for service "chat"
Jan 6 11:53:58 marquardtplus jabberd/c2s[98309]: od_auth_check_service_membership: mbr_check_service_membership returned 0
Jan 6 11:53:58 marquardtplus jabberd/c2s[98309]: od_auth_check_service_membership: user "com.apple.notificationuser" is authorized to access service "chat"
Jan 6 11:53:58 marquardtplus jabberd/c2s[98309]: [7] bound: [email protected]/icalserver.9c433d7eee6b45a 481f8d560b46ca943
Jan 6 11:53:58 marquardtplus jabberd/sm[98306]: session started: [email protected]/icalserver.9c433d7eee6b45a 481f8d560b46ca943
The only users I've tried to log on so far are [email protected] [myself] and [email protected], both got the same issue.
If there's anything else I can provide, I will happily do so.
Thanks,
Gretchen -
I can not communicate with the FP-1000, using the serial port.
FP-100 communication by serial port.
My problem is the communication with the interface FP-1000, I haven been using it for two month with my program application and suddenly it stopped to work. I tried to use the FieldPoint Explorer to communicate using its last configuration but it does not work. I have tried to configure again and the FieldPoint Explorer doe not find any module, also I have seen that the network and access LEDs don lit when I am trying to communicate with the FP-1000.
I have checked all connection and they are already, the FP-1000 turn on, and the status LEDs does not lit.
I guess the trouble is the RS-323 connector at the FP-1000.
Could you tell how can I solve this problem?Hello,
There are a number of things that you can try when you are experiencing communication problems with a FP-1000.
First, double-check that the serial port that you are using is the same one that you are specifying in FieldPoint Explorer. Try using another serial port on the host computer. Try connecting the FP-1000 to another computer.
Make sure that you have FieldPoint Explorer version 3.0.2 or later. Free upgrades are available from the web.
I hope this helps,
Chad Evans -
Can´t communicate with the primary DNS Server 200.49.156.5: and now?
Hi,
I have connected a Sony Vaio with a Linksys WRT54G router, using broadband cable provided by a Motorola Surfboard Modem (model 5b5100i)
I followed all the steps from the router´s CD.
Finally I connected a network cable to the port 1 of the router and on the other extreme the Motorola Modem is now connected. As result, since I have a desktop already connected to the modem, there are now 2 connections on the back of the motorola modem, 1 for a desktop that uses its USB plug and a 2nd, which uses a network cable (ethernet connection) and that plugs at the end to the Linksys router. connection is ok based on the Linksys CD.
The wireless card of 2 different laptops recognize the router´s signal, but no internet copnnection is available.
after diagnostic on network problems by Vista Windows, I receive the following message
¨"Cannot communicate with the primary DNS Server 200.49.156.5"
What does it mean? what needs to be set in order to make it work?
Thanks in advance for any helpI talked to a tech support form my cable company and the motorola only provides 1 IP address, therefore, in order to make a router work (it will need its own IP address, a 2nd one), you need to buy an ADDITIONAL internet connection or access point....this company is in Argentina. While I lived in the US (last month) they allowed me to have multiple computers from the same one connection.
bottom line, calll your ISP and tell them you need either to install the router on your connection OR to have an additional internet cable input....
just my 2 cents...business rules. -
I am trying to burn some wedding pictures to a blank dvd rw. I keep getting an error message that says the drive and the disc can't communicate. I have run a repair disc and repair disc permissions, restarted my laptop, and still get the error. What else can I do?
Hi sheryl525,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
Apple Computers: Troubleshooting the slot-loading SuperDrive
http://support.apple.com/kb/HT2801#
Cheers,
- Judy -
IChat 5.0 and "can't communicate with the AIM account
Works fine with AIM software, just stays disconnected in iChat
Message also says "the server did not respond. Please try again.
Any help would be appreciated!Hi,
Do you mean you can not log in your AIM name in iChat ?
Change the Port in Server setting to 443.
in iChat 5 SSL has to be On first the change the port and Press Enter to "Set"
SSL can now be turned Off if your want.
10:24 PM Wednesday; September 16, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
For three years my iMac and Mac mini were networked via Airport Extreme with a printer and the internet. More recently, I added an iMac and iPhone. PROBLEMS: A few months ago the Mac mini lost its connection to the printer, and now it cannot locate the network at all.
If you use the extreme as a router then the tc should be connected via its wan port to one of the lan ports on the extreme. Tc should be set up in bridge mode. Basically you could set it up to create another wireless network beside the one created by the extreme. There is no need to use WDS or extend the other network.
Use the same SSID and password for both machines. Computers will connect to the strongest signal. -
HT2515 "iChat can't communicate with the AIM account "(my account)"
i was successfully chatting this morning but suddenly I am unable and the error message says my screen name has been suspended and cannot be used to log in... I don't know what to do! I depend on using this!
HI,
You need to read this AOL/AIM help article
8:16 PM Monday; May 7, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Computer Can't Communicate With Printer
Hi,
After installing Win 8.1 on two different computers, both have the same printing problem.
The first problem that appears is "Bidirectional Support" must be enabled... It was enabled in Win 8 prior to the upgrade...
It took awhile to figure out how to enable it, as after every attempt to check the box, the check would disappear after closing and reopening the window.
It turns out that this won't work with the printer connected. After disconnecting the printer the setting will stick, and when the printer is reconnected it stays that way...
Unfortunately this doesn't resolve the problem... Now I get the error that the computer "Can't Communicate With The Printer"
Attempts to reinstall the software\drivers have been for the most part useless... Even after removing the printer in Devices and Printers and uninstalling the software\drivers, the Driver installer insists that the drivers are still installed and will only
"Update" them, or "Install Another Copy"... neither of which resolves the problem...
On one occasion, I was able to get a complete install, but only after doing a search through the Registry and Deleting everything that came up concerning the printer... This still didn't resolve the problem.
On one machine, after doing this, the Print Spooler would hang and run the CPU at 50% indefinitely. After playing around awhile, I found that if I turned off the Print Spooler in "Services" while it was doing this, and then restart it, the file
would actually print properly...
I have checked the settings in Windows Firewall, and everything for the printer is "Allowed". I even turned the Firewall off to no effect...
This is a Lexmark X5340 USB inkjet printer that works perfectly on the same machines when running Win 7 or Win 8 with all the same connections, software, drivers, and etc....
Is there something different with Win 8.1 than Win 8 concerning printers?Hi,
I wanted to let you know that I've stumbled upon a way to get the Lexmark software\drivers to reinstall on the Win 8 to 8.1 Upgrade...
It has to do with the Print Spooler interfering with the uninstall\reinstall process. I had read about a recommendation to turn off the Print Spooler before uninstalling the software quite some time ago, and I had tried that, but it didn't work. Here are
the tricks to get it to work if it isn't too late for you.
Note: Bidirectional Support is needed, and for some reason the upgrade process turns it off. This may also be related to the Print Spooler....
1) Turn on and hook up your printer... This needs to be done just this one time to get it to show up in Devices and Printers.... Otherwise, all I get with my machine is the Lexmark Fax, and as a result, you can't "Remove" the printer.
2) Once the printer is visible in Devices and Printers, unhook it..
3) "REMOVE" the Lexmark Printer and Lexmark Fax (if you have one) in Devices and Printers.
4) Stop the Print Spooler in "Services"
5) Uninstall the software\drivers... In the process of doing this, I got a popup Security message from Windows Firewall concerning "Allowing" Printer Communication... I selected "Allow".
6) At the prompt from the Lexmark uninstaller, Reboot.
7) After rebooting, stop the Print Spooler again.
8) Reinstall software\drivers... I used both XP SP3 and Vista Compatibility Mode on different attempts, and both worked... Hook the printer back up when prompted by the installer.
9) Unhook the printer again and reboot. Bidirectional Support must be Enabled, and the setting won't stick if the printer is hooked up.. You need to reboot to clear things up before the next step.
10) Enable Bidirectional Support and Reboot. To do this, go to Devices and Printers and select "Printer Properties" and then the "PORTS" tab... The check box is near the bottom.
11) Set any Printer Preferences you use, if any, and it's ready to go.
I just noticed that when I right click on the Lexmark Preferences, Properties, etc., it is showing two of them for some reason. I don't remember that happening the first time I tried this, but I might have missed it.
I'll need to investigate that a bit.
EDIT... It seems the second printer doesn't show up until after Enabling Bidirectional Support...
I guess that makes a little bit of sense... two printers for two directions.
Thanks for the info. I found it was necessary to change the print spooler. You will also need to set another service that is used during printing that provides screen interaction for the print spooler. Make both of them automatic. -
IChat can't communicate with my AIM account
Hi, every time i try go to to my ichat it automatically logs me out, and when i try to log back in, it says "iChat can't communicate with the AIM account 'aforever0203' and The AIM server has temporarily limited your account due to too much activity. Try again in a few minutes" This has been happening for days, please help!
HI,
Go here https://settings.aim.com/
Can you sign in there ?
This will not work for newer @me.com and @icloud.com IDs issued under iCloud ( I notice there are at least 2 Me Toos clicked)
With Apple IDs there have been issues over the last few months about accounts getting Suspended when people have travelled to foreign lands.
The "normal" fix with AIM names is to Change the Password but obviously changing the Apple Passwords cannot be seen by AIM.
In that case you need This link about Suspended accounts and you need to use the TOS General email address.
(You need to explain very carefully that you have an Apple ID and that AIM cannot see any Password Change and that they will have to reset the account manually - some support staff seem not to know that Apple have an agreement that Apple IDs are also AIM Valid Names)
If it is a plain AIM name a Password reset should correct the issue.
11:09 PM Saturday; January 12, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously
Maybe you are looking for
-
Multiple stereos off of Airport Express
I was wondering if there is a way to connect my airport express up to a optical cable on my stereo and to the headphone jack from my harmon kardon soundsticks. This way it could run more speakers at once, is there a special cable that can split from
-
Difference between down payment & advance payment
Hi frndzz.. I have lil' confusion on these two. Advance payment is what you you pay to your vendor against the purchase order is raised. Later you clear this value against the invoice sent by your vendor. I see the same is applicable for downpaymen
-
AX set up as WDS to use with a switch. does airtunes capability go away?
quick question, since i can't seem to find the answer to this. if i configure an ax as wds (so i can use the ethernet port to hook to a switch), will it still work as an airtunes distribution point? i suppose i could try it... but taking the lazy way
-
Notes Sync Clutters my Mail, any other options?
My 3GS notes is synced to MacBook Pro, and all the notes appear in with the rest of my emails. Is there a way to have all of my notes appear someplace else so it does not crowd my email?
-
HT1918 I'm not able to update a credit card information in the billing area of my account, why?
I'm trying for quite some time to update my credit card information and I'm not able. I keep getting a contact itunes support msg. The only way for me to be able to fund my account is thru gift cards. Why?