Can't complete last Motion Update

Just can't complete the las Motion 5.0.6 update. It keeps telling me to go to purchase page for completing. Keep having the same message!!

Can you show me a screen shot of the message as it appears?

Similar Messages

  • New pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

    new pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

    Sounds like you somehow got the mac version.
    Download the windows 6.7 camera raw update from this link:
    Adobe - Photoshop : For Windows : Camera Raw 6.7 Update

  • I can't complete a software update

    Every time I try to complete a software update the download stops and the following message appears:
    'The update "Security Update 2013-004 can't be saved". The file "SecUpd2013-004.pkg" couldn't be found on the server "swcdn.apple.com'

    You might download and apply the Combo update for 10.6.8 ... It does take some time to apply.   It doesn't matter if you are applying it over the top of a previous download of the Combo.  Then go to software update and apply the various recent iTunes and security updates.
    Mac OS X 10.6.8 Update Combo v1.1

  • HT4890 i maid a version update , but when turn on all the data and contcats are old where can be the last dated update

    Dear all
    i have maid a version update to my iphone
    the system has asm me before to make a buck up i did confirm to be on i cloud
    after the new instlation compleitemd on th eiphoen theor was not contcats
    only nimbers wit h no names
    i have tryeid few way and at last i have recived soem list of contacts old date make be a year old
    then i wend to icloud and alos their the list is old
    as wellon th emac it is old
    where is the data and hwo can i get back to what i had on the day of bucking up
    thax
    nati

    There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

  • Can not complete downloads or updates on any apps. Just says "waiting" for days now

    Can not download or update apps.  For days now it just says "waiting".
    Any suggestions?

    Is it also possible that you have a movie or song or podcast that coudl be 'stuck'? That's happened with many people. It's like the download pipe is a one lane road and any 'broken down' download jams up traffic behind it until it's deleted or resolved.
    Above is the answer I found that worked

  • How can I complet a firmware update?

    I have been trying to update my airport. It works fine with the two computers closest but only intermittently with the furthest and is getting worse. It connects reliably with the imac in the same room, the laptop in the nest room but rarely with the old G450 down the hall in the kitchen. This started months ago.

    Just to give you a bit more details on how to using iStumbler for troubleshooting ...
    Use iStumbler's Inspector feature (select Edit > Inspector from iStumbler's menu) to determine the Signal-to-Noise Ratio (SNR) at different points around your house, by performing a simple RF site survey. Within the Inspector, note the values for "signal" & "noise" at these locations. Start with your laptop near the AEBS, note the readings, and then, choose the locations where you will typically want to access the Internet.
    SNR is the signal level (in dBm) minus the noise level (in dBm). For example, a signal level of -53dBm measured near an access point and typical noise level of -90dBm yields a SNR of 37dB, a healthy value for wireless LANs.
    The SNR, as measured from the laptop, decreases as the range to the base station increases because of applicable free space loss. Also an increase in RF interference from microwave ovens and cordless phones, which increases the noise level, also decreases SNR.
    SNR Guideline
    o 40dB+ SNR = Excellent signal
    o 25dB to 40dB SNR = Very good signal
    o 15dB to 25dB SNR = Low signal
    o 10dB to 15dB SNR = Very low signal
    o 5dB to 10dB SNR = No signal
    If the SNR is 20dB+ at each of these locations, then you should be getting reasonable performance from your AEBS. If less, either try to locate the source of the Wi-Fi interference or try relocating either the base station or the wireless clients until they are within a 20dB SNR range.

  • Can't complete Leopard Security Update

    I've tried to update to Leopard Security Update 2012-003 through the software update tool and direct download, but in both cases the intallation process is stopped because the intaller insists that Safari is closed in order to finish the process. Safari is closed, though, but it won't recognize this. Note sure how to proceed with this.
    Any thoughts?

    Great news, great to hear, thanks!
    10.5 doesn't require it as often as 10.4 did, but still useful, especially combined with a SAfe Boot that Repairs the Disk & clears many stale caches!

  • When ever I try to sync my iPad2 to itunes i can never completely "update and download" because after the entire process it says "Error: unable to complete update /download, network timed out"!  Why? I have wi-fi in my house

    I can't complete my iPad2 update and download, ever.  It says my network timed out and I don't know why.

    Temporarily turn off any firewall or anti-virus software you have on your PC while downloading.

  • Last data update

    Hi,
    How I can find the last data update information(date and time) of multiprovider in BW?
    Kindly help on this.
    Regards
    Mukul Singhal

    Let me explain how the "last data update" works.
    If the query is based on one cube or DSO, it is the time of the last request upload.
    If the query is based on a multiprovider, like the example given ealier,
    assume there are three cubes in multiprovider : 
    Last update of cube1 is 11/17/2008
    Last update of cube2 is 11/19/2008
    Last udpate of cube3 is 11/20/2008.
    The "last data update" will be the earliest day of the "last data update"s of all partproviders, i.e.11/17/2008.
    Because the meaning of "last data update" is that, data (of all partproviders) has been already updated until this time.
    Now we assume there are three cubes like this in multiprovider :
    Last update of cube1 is 11/17/2008
    Last update of cube2 is 11/19/2008
    Cube3 is empty. It has never been loaded with any request.
    Then the "last data update" will be empty. Because until no time has all partproviders been updated. This is the design of the system.
    Regards,
    Patricia

  • HT4623 My Iphone 5c won't complete the syncing process with my computer since I did the last software update. The error message says that it can't find SuncUIUCoreLocalized.dll

    My Iphone 5C won't sync for the backup since I did the last software update to my phone.  It fails in step 3 of the sync. The error message says it can't find      SyncUILorelocalized.dll

    Hi rich26817,
    Welcome to the Support Communities!
    The article below may be able to help you with this. You may need to remove iTunes and all of its components as outlined in this article:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Cheers,
    - Judy

  • Last delta update is not yet completed

    Hi,
    in data loading we are facing problem, and the error is
    Last delta update is not yet completed
    Therefore, no new delta update is possible.
    You can start the request again
    if the last delta request is red or green in the monitor (QM activity)
    today data is not loaded i have checked the data targets there are two error(red) records are there, so i deleted these red records diectly with out marking to red  even though records are in red.
    now i am repating the loading system is showing the above message.
    please help me how to load the data.
    Regards,
    Satya.

    HI Satya
       First make the status red in DSO or cube what ur loading by doing QM activity.Then goto monitor RSMO and then make the status RED.So only u can able to reload.If u didnt make the status red u will get the above message.
    Regards
    Arun kumar

  • I can not access my visual voicemail since the last iphone update?

    I do not have access to visual voice mail since completeing the last IOS update. Can anyone help? I already tried re-setting my
    network settings.

    The first thing to try is to open Phone, and simply dial "1" -- hold the "1" key down for 2 or 3 seconds.  That should send you to your cellular carrier's voicemail box.  You may be asked for a password.  Type it in if you ever had one, if not, try your telephone number as the password.  If that does not set up visual voicemail, contact your cellular carrier.

  • HT6195 Big problem with the last security update, how can I solve the problem?

    Yesterday I installed the last system update in my secondary computer, a Macbook Pro (OS 10.8.5, if I remember well), from that moment is impossible to restart it. How can I solve the problem?
    Today Apple is worst than Windows, but is considerably more expensive! I am seriously considering to change to Windows, in less than 3 months I had serious problems with two Apple computers and I changed 4 computers (always Apple) in less than 6 years.

    tmjavier,
    feel free to use whichever operating system best suits your needs. Since this is a user-to-user forum, whether you use OS X or Windows will affect no one’s bottom line here.
    Regarding your MacBook Pro, you can try booting it into Recovery mode by holding down a Command key and the R key as it starts up. Once the  OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it able to reach the login screen now?

  • Hello everybody, I need to update my ITunes on my MAC (laptop) to the newer version so I can then be able to update the latest updates for my Iphone-3G'S. I don't require a complete reinstall just need to be able to update it.What I have tried so far is I

    Hello everybody, Im trying to update my ITunes on my MAC (laptop) to the newer version so I can then be able to update the latest updates for my Iphone-3G. I don’t require a complete reinstall just need to be able to update my itunes.
    What I have tried so far is I had my MAC search for update’s and it said that I should update to (ITunes version  10 . 6 . 3 ) So I asked it to do the update but after 2hrs of waiting for it to download/update it then puts up a message saying the following- (In order to continue installation, please close the following application: ITunes).
    When I tried to do this another message comes up that says- (The update ITunes can’t be installed. The following install step failed: run preupgrade script for Apple mobile device support. Contact the software manufacturer for assistance.)
    I have also tried to run the update while having closed ITunes before I even start the update but the same problem happens after waiting about 2hrs.
    Some one that had the same problem said this might be happening in the older operating systems. But that does not make sense because surely Apple want customers who own a MAC and i-phone to still buy from iTunes.
    My MAC is about 4-5years old. I have a i-phone.3G, 
    Can anybody help me please and Thank you?

    Download iTunes using the tab at the top of this page. Then run the update with iTunes closed.

  • Since installing the last iPhoto update sharing a photo via e-mail opens a google e-mail format instead of an Apple Mail format.  How can I get the Apple Mail format to come up when I click on share?

    Since installing the last iPhoto update sharing a photo via e-mail opens a google e-mail format instead of an Apple Mail format.  How can I get the Apple Mail format to come up when I click on share?

    iPhoto preferences - set the email client to Mail
    LN

Maybe you are looking for