Can't complete Leopard Security Update

I've tried to update to Leopard Security Update 2012-003 through the software update tool and direct download, but in both cases the intallation process is stopped because the intaller insists that Safari is closed in order to finish the process. Safari is closed, though, but it won't recognize this. Note sure how to proceed with this.
Any thoughts?

Great news, great to hear, thanks!
10.5 doesn't require it as often as 10.4 did, but still useful, especially combined with a SAfe Boot that Repairs the Disk & clears many stale caches!

Similar Messages

  • New pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

    new pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

    Sounds like you somehow got the mac version.
    Download the windows 6.7 camera raw update from this link:
    Adobe - Photoshop : For Windows : Camera Raw 6.7 Update

  • Can't  email after security update last 48 hours

    can't email after security update?
    help I

    See possible fixes here.
    https://discussions.apple.com/message/19760703#19760703
    https://discussions.apple.com/thread/4311280?tstart=0
    https://discussions.apple.com/message/19710911#19710911
    Some have reported success simply by reinstalling the update.
    http://support.apple.com/kb/DL1586
    Or download and apply, or reapply, the 10.6.8 Combo update first, then apply the Security Update again.
    http://support.apple.com/kb/DL1399
    I'd suggest starting with the simplest of these fixes, so look them over first.

  • Leopard Security Update 2012-003 for Mac OSX 10.5.8

    I just discovered a Leopard Security Update 2012-003 in reading an article in MacWorld, but when I checked my computer, I found that I did not get it through Software Updates' check for updates. Is there something wrong with my Software Updates? Or is just that this must be manually downloaded by the user? My iMac is an Intel Mac.

    Hello Laura,
    Could you have SWUPD set to automattically get updates?
    Check Library>Reciepts at root of the drive, nit your user Library, & see if it's been installed.
    Also, if this is a PPC iMac it only was for Intel iMacs, since PPCs weren't able to get that FlashBack infection for one thing.
    If Intel, you coild always get it directly & re-apply it...
    http://support.apple.com/kb/DL1533
    Leopard Security Update 2012-003
    Mac OS X v10.5 to 10.5.8 (Intel)
    14 May 2012
    Flashback Removal Security Update
    Mac OS X v10.5 to 10.5.8 (Intel)
    14 May 2012
    http://support.apple.com/kb/HT1222

  • I can't complete a software update

    Every time I try to complete a software update the download stops and the following message appears:
    'The update "Security Update 2013-004 can't be saved". The file "SecUpd2013-004.pkg" couldn't be found on the server "swcdn.apple.com'

    You might download and apply the Combo update for 10.6.8 ... It does take some time to apply.   It doesn't matter if you are applying it over the top of a previous download of the Combo.  Then go to software update and apply the various recent iTunes and security updates.
    Mac OS X 10.6.8 Update Combo v1.1

  • AppleTV no longer shows up in iTunes after Snow Leopard security update?

    I just installed the latest security update for Snow Leopard and now my AppleTV no longer shows up in iTunes. I don't know for sure if the security update is actually the cause, but I was able to connect not even an hour earlier in the evening.
    Anyone else seeing this behaviour? I've power cycled the ATV, along with my router with no change.

    Could be the same problem others are having with latest version of iTunes. See this thread:
    http://discussions.apple.com/thread.jspa?threadID=2403159&tstart=0

  • I can not download Windows Security Updates due to incompatibility with FireFox.

    Firefox is not allowing critical security updates, or any updates, to Windows and Adobe. It also interferes with my Norton security updates!! (have premium home user software).
    I don't like this new version of Firefox. I had agreed to be a beta-tester, but had to withdraw due to the problems in the FireFox software.

    It may be because you appear to be running a BETA version of Firefox. Try using the Help | Updates route to update to the full release first. You can also download the full release from here: [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0]
    You can downgrade at any time by downloading v3.6.16 from here: [http://www.mozilla.com/en-US/firefox/all-older.html Download Firefox v3.6.16]
    Then go to Add/Remove programs and uninstall the current version, but choose to keep your bookmarks, customizations etc. Finally, reboot and then run the installation file you downloaded.

  • Latest Leopard Security Update Kills Photoshop 7?

    Yesterday installed the latest security update on iBook G4. Today Photoshop 7.0 won't open, giving an error message that reads, +An unexpected and unrecoverable problem has occurred because of a program error. Photoshop will now exit+.
    Coincidence? It never happened before the update installation. Reinstalled Photoshop...same result. Any ideas anyone? TIA

    Apparently, there is a fundamental Leopard/Photoshop conflict, up to and including Photoshop CS2. Here's a thread at Adobe's site:
    http://www.adobeforums.com/webx/[email protected]@
    This is not a happy situation, and had I known, I would not have gone to Leopard. A message on the above thread indicates Adobe is aware of the problem, but no fixes are imminent.

  • Can't complete last Motion Update

    Just can't complete the las Motion 5.0.6 update. It keeps telling me to go to purchase page for completing. Keep having the same message!!

    Can you show me a screen shot of the message as it appears?

  • Cannot complete iPad security update download or installation. err= -3259

    I've been having trouble downloading and installing the latest iPad security update (iPad version 4.3.5) from the most updated iTunes (version 10.4.1). Whenever it reaches the end of the download, it would give an " err= -3259 " code and indicate that my network connection has timed out. However, there isn't any problem with my network connection (this was even tested with an Apple staff in the Apple store). But they can't fix the problem either and asked for me to call Apple Support. Does anyone have a solution for this problem?

    Some else helped me with this.
    See:
    https://discussions.apple.com/message/16451120#16451120
    I was able to download, update, and restore my iPad using the process suggested by a helpful person in this thread.

  • Snow Leopard Security Update Warning

    Since I haven't seen it mentioned yet on this forum, for those of us still using Snow Leopard, there is a growing number of reports that the latest security update hoses Rosetta. See the Snow Leopard forum elsewhere in the Apple Support Communities as well as http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012

    Since I didn't install the Security Update, I didn't lose Rosetta, so I haven't tried the following, but in this thread: https://discussions.apple.com/message/17484448#17484448 there is a discussion of a possible solution. The Google translation of the referenced link here: http://translate.google.com/translate?u=http%3A%2F%2Fforum.macbidouille.com%2Fin dex.php%3Fshowtopic%3D354758%26st%3D60&tl=en suggests it's an easy fix, at least if you've got a backup or Time Machine backup. Again, I haven't tried this so use at your own risk, but it sure looks easier than reinstalling Snow Leopard.

  • Cannot download podcasts after applying latest Leopard security update

    Last night I applied the latest security update to my Mac Mini, running the latest version of iTunes and Leopard. This morning I went to update my iTunes library with the latest podcasts. When I did the refresh, it started to download several podcasts, but then stopped them all with a message stating that I did not have the proper permissions. My iTunes library is on a fireware-connected DROBO that has approx. 1.5 TB free space. I have been using this configuration for over 2 months without problems.

    You need to check permissions on the folder that holds your library. Navigate to your music folder, Get Info and make sure permissions are set to READ and WRITE. Then...make sure it's applied to ALL enclosed folders. (Click the Gear for the apply to all option.)

  • Can't install new Security Update (PPC)

    Hi. Im trying to install the new security update for PPC, but somehow i cant. When Im about to choose the destination, the installer said that "You cannot install Security Update...(PowerPC) on this volume.This volume does not meet the requirements for this update."Kind a weird but Im installing it on my iMac's HD & my system is running 10.4.8. I hope somebody can help me.Thanks in advance.

    Use Software Update to install the security update. Repair Permissions before and after.

  • Can't install latest security update

    Hi all,
    Hope Someone can help me out in this problem. I've been installing the latest security update (Security Update 2008-002) for many times, but every time the installation bar reaches its end, I get this message:
    A networking error has occurred: Error NSURLErrorDomain -1005 (-1005). Make sure you can connect to the Internet, then try again.
    I'm quite confidant that the Internet connections is working properly. This problem has occurred more than 5 times!
    Any suggestions guys?
    BTY, I'm using the Safari 3.1, if this has anything to do with the problem.
    Thanks...

    boabdo wrote:
    Sorry for my late reply but I lack of high-speed Internet connection at my place.
    *Hi boabdo, Welcome (Back)* to Apple's Users Help Users Forums.
    Take a CD and a smile to a friend w Mac and DSL or an AASP or a Public Library w Macs or an Internet Café w Macs. I add the "w Mac" cuz I saw a thread where DL was PC version. For a SU that may not be relevant so even if PC it may work.
    Good Luck, JP

  • Can I undo a security update?

    I have lost my wireless connection after the latest update.
    The Windose machine still works it is just my MacBook that has stopped.

    I have lost my wireless connection after the latest
    update.
    The Windose machine still works it is just my MacBook
    that has stopped.
    Same problem. Airport ok on the iMac (no airport extreme update since not intel processor inside) but airport on macbook pro can not see the wireless network created by D-Link router. I do not think the security update created the problem, but more the aiport extreme update. However changing wep encryption does not seem tho repair the problem. Someone else has a suggestion?

Maybe you are looking for

  • What is happening with Multimedia players in Firefox 8?

    Is there some big problem here? Since Firefox 8 I have been struggling to get Multimedia and Flash content on websites, including BBC and Facebook, to work right. I have re-installed Adobe Flash player and Shockwave flash players on several occasions

  • Error in saving site as a template

    hi, i have created a site http://mysrvr/sites/test and  i added  - 20 doc libs and  8 splists, custom master page, discussion forum, calendar control and uploaddocumentcustom  web part and custom css file-  as per  my requirement . and i saved this s

  • IPhone 5 won't update to iOS 8

    Hey there I seem to be having this software update with my iPhone 5 software. Previously when iOS 7 had come out... I had tried to update my phones software by using iTunes and it would go 3/4 way through and a message would come up saying that the s

  • 11gR2 Certifications

    Hi all, Do anybody know when the Oracle 11gR2 certifications exam will be ready? I want to be certified in 11g R2 and I know now I can upgrade my OCP to 11g but with release 1. For example, RAC administration are shared between 10gR2 and 11gR1 but th

  • Too high TimeDataRetrieval(15 mins) of a report is making us restart the reporting services

    Hi, We have an SSRS report which is taking less than a minute to open on development server. Same report on production server is taking more than 15 minutes to retrieve the data; rendering and processing time is very small comparatively which is not