Can't configure 7.1 speakers correctly (all speakers with same outpu

(I'm using Windows XP Pro with, Soundblaster X-Fi XtremeGamer and Gigaworks S750)
I'm trying to configure my Creative Gigaworks S750 speaker system for listening to Music but I can't seem to get the sound configuration that I would like.
I have the speaker system connected to my computer (with all 3 connectors) and when listening to Music I would like to have the same amount of volume in each speaker. Or to treat all speakers on the left as a single front speaker, and all speakers on the right as a single front speaker.
Right now, no matter how I tune the software/hardware I always get a movie surround style sound. Most of the sound is coming from the Center, then the left right and the middle and back speakers have barely any sound coming from them.
Hardware-wise:
I have already minimizes the volume on the center channel on the hardware volume control that comes with the speaker system and also adjusted the center/rear volume to Maximum.
I have also tryed the 5.->7. and 6.->7. up mix feature.
Software-wise:
Every software that comes with the speaker system is installed. I use "Entertainment mode" when listening to music and in that mode I have tried:
- Adjusting the speaker mode to 2./4./5./7.
- Turned the CMSS3D on/off
- Adjusting to "Gigaworks S750" in the THX menu
- Listening to the Speaker assignment in the THX menu and all the speakers give the same amount of noise there
I have also tryied changing speaker modes in the Speaker configuration in Windows and that doesn't do anything.
I've tried both Winamp and Windows Media Player.
How can I fix this?
P.s.: Don't get me wrong, I still want the surround for when playing games and watching movies. That feature works very well.

set the speaker switch to direct not 5.1->7.1 and 6.1->7.1. set cmss3d to stereo expand.

Similar Messages

Let all channels(with same data structure)run one program

Hello,
I want to let all channels with same data structure run one program,how can i program it?
Thanks!

Hi charleen,
You're going to need to provide more details for us to help you. In general "channels" do not "run" programs. You can, however, run a program which loops over channels, checks their properties, and decides whether to include them in the overall analysis. What do you mean by "data structure"?
What do you want to actually happen in the "program"?
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Can RH8 generate a "running header" on all topics, with graphics?

Can RH8 generate a "running header" on all topics? Does that use the "master page" feature? If so, can said running header also contain a graphic? My output is HTML Help, if that affects your answer.

Hi there
Yes, Yes and Yes!
Yes, you may configure a header. And Yes you use the Master Page to do it. And yes the header may contain an image.
Cheers... Rick
Begin learning RoboHelp HTML 7 within the day - $24.95!
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Can you use Sony NS400 speakers with Apple Tv

Can you use Sony NS400 wifi speakers with Apple TV
Thanks
Hugh

The iPad/iPhone need to be on the same section of the network as the Apple TV. connect the Apple TV to the wireless router instead of the AT&T router. If you can, connect the other devices as well...

Batch Master Changes reflecting all plant with same Batch

HI,
When we are doing any change in Batch Master ( MSC2n ) for one plant like Shelf Life expiry date or Classification data for one plant.
its automatically reflect on all plants for same batch.
Example:
Material : 123456
Batch : 10925
Shelf Life Expiry is : 31.12.2014
Plant : 1000
This Batch is available on 10 plants for same material.
Now when i change Expiry date from 31.12.2014 to 31.12.2015 on Plant 1000 for Batch 10925
its also change on all other 10 plants.
How can we restrict this behaviour we only want to change on 1000 plant . should not change other plats.
Regards

Thanks all for your replies. yes i have check the system and Batch Level is defined on Material Level.
Jurgen actually this question is not related to expiry exactly. just for
good understanding of question i put question like this.
in classification tab we have one parameter "Release Status" which have value
X or Y. X means release and Y means Not release.
We are using this parameter for Auto batch determination purpose. if value is Y then this
batch will not come in auto batch determination.
same thing happend to this parameter. when we change value of this parameter in classification in one plant it is refelecting on all plants. which i dont want.
i hope you get my point.

Can i rejoin ny SCVMM 2012 server to domain with same name & IP address?

Dear all..
I am in situation where i have to rejoin my scvmm server to domain with same name & ip address.one of the fool admin has deleted my SCVMM's computer object from AD. I have recreated the object & tried to log on but no luck.. i have to rejoin
the server.
Does it have any risks involved or its just fine?

Hi,
First the behavior is normal. If an computer accounts is deleted, you cannot continue using the server without rejoining.
SCVMM it's not depending (integration) on active directory in such way as Exchange.
So, if the computer accounts has been deleted, there is no issue in creating a new one and rejoin the server. As long as the application on the server is able to look up any required directory services, it should be happy again.
Best Regards,
Jesper Vindum, Denmark
Systems Administrator
Help the forum: Monitor(alert) your threads and vote helpful replies or mark them as answer, if it helps solving your problem.

Can't configure 7.1 speakers correctly (all speakers with same output)

(I'm using Windows XP Pro with, Soundblaster X-Fi XtremeGamer and Gigaworks S750)
I'm trying to configure my Creative Gigaworks S750 speaker system for listening to Music but I can't seem to get the sound configuration that I would like.
I have the speaker system connected to my computer (with all 3 connectors) and when listening to Music I would like to have the same amount of volume in each speaker. Or to treat all speakers on the left as a single front speaker, and all speakers on the right as a single front speaker.
Right now, no matter how I tune the software/hardware I always get a movie surround style sound. Most of the sound is coming from the Center, then the left right and the middle and back speakers have barely any sound coming from them.
Hardware-wise:
I have already minimizes the volume on the center channel on the hardware volume control that comes with the speaker system and also adjusted the center/rear volume to Maximum.
I have also tryed the 5.1->7.1 and 6.1->7.1 up mix feature.
Software-wise:
Every software that comes with the speaker system is installed. I use "Entertainment mode" when listening to music and in that mode I have tried:
- Adjusting the speaker mode to 2.1/4.1/5.1/7.1
- Turned the CMSS3D on/off
- Adjusting to "Gigaworks S750" in the THX menu
- Listening to the Speaker assignment in the THX menu and all the speakers give the same amount of noise there
I have also tryied changing speaker modes in the Speaker configuration in Windows and that doesn't do anything.
I've tried both Winamp and Windows Media Player.
How can I fix this?
P.s.: Don't get me wrong, I still want the surround for when playing games and watching movies. That feature works very well.

set the speaker switch to direct not 5.1->7.1 and 6.1->7.1. set cmss3d to stereo expand.

Analog Audio Output Jack for Digital Speakers with same jack configuration

I just purchased my first Mac, a Mac Pro. I can't get sound to my speakers using the analog out jack. With my old PC, there was a setting for "digital output" even though the digital speakers were attached via to the same style jack as the Mac's analog out jack. I've tried going to preferences but don't see a like setting for digital output. Is there a setting to do so and if not, is there an adapter to convert the Mac's digital audio out to the analog jack style?

Do you want digital or analog? Your question seems to imply that you have speakers that accept a digital signal but you also say you want analog...??
Anyway, my Mac Pro (2006 model) has separate analog and optical digital outputs on the back. The pictures on the apple website still show the same thing on the Mac Pro so I'm guessing it's the same. I think only the Mac laptops have the analog/optical digital combo jacks...
The optical digital outputs are the little white squarish ports beneath the rear firewire ports.
The MacPro does not have a SPDIF RCA style output. Maybe that is what you are thinking of from the windoze pc...
You should be able to enable the rear analog line output or the digital outputs from the System Preferences > Sound > Output screen. The front headphone outputs kind of act weird in that they disable the rear line output (if I remember correctly, I never use the front port...).

Can you use 5.1 speakers with a macbook

I want to buy some 5.1 speakers and use them for my macbook. Can this be done or will only 2 speakers work?

Hi brad
You can use 5.1 speakers, but you have to choose your purchases very carefully.
Here are your options:
A. If you ONLY ever want to watch 5.1 DVDs then you can buy a home cinema sound system with an optical (toslink) connector. BE AWARE THAT THIS OPTION IS LIMITED. You can only watch media which has pre-recorded embedded 5.1 audio. This excludes many games.
B. If you want to watch 5.1 DVDs and play games that have surround sound then you need to purchase a 5.1 usb "sound card", and a 5.1 speaker system. For the USB sound card, I have a Hercules Game Surround Muse Pocket LT3. This would appear to be the latest version on Hercules' web site: http://www.hercules.com/us/Sound-Cards/bdd/p/56/muse-pocket-lt/
You will also need a speaker system that uses 3 stereo input jacks (Front L+R, Rear L+R, Centre+Subwoofer). Not all systems will have these inputs. I have an Altec Lansing system that works nicely with the Hercules.
Whatever you buy, make sure that the shop will take it back if it should prove unsuitable.
Bob

HT5622 Can you have multiple apple ids and all share the same apps and music?

I have multiple devices, iphone 5s (myself), mini ipad (son), 5th generation ipod (daughter). When I receive imessages they are going to the other devices and not my phone. Is this because I have all devices set up on the same Apple User ID or am I missing something in Settings that needs to be turned on/off? I have all devices under the same User ID to control the purchases. Now I'm thinking maybe each device needs to have it's own User ID and if I switch them now, will we all still share the same apps and music? Any help or suggestions is greatly appreciated.

Wouldn't you only need to create a new apple ID and put that on your phone instead of your old apple ID that is merged?

Can you use Apple Mac speakers with Macmini?

My old Apple mac speakers - the ones in transparent plastic hemispheres - come with a 1.5mm jack, but the Macmini has a standard 2.5mm socket. Is that because the voltage or something is different? If you fit the right jack, will they work OK?

Those are the speakers that were shipped with the Cube G4. They are analog, but unpowered. They require an external amplifier. The Cube had an amp built-in. For a while, Griffin made an external amp adapter. They no longer do.
These speakers will not work properly with a typical computer sound output, even if you come up with an adapter that makes the physical connection. The resulting sound output would be a whisper.
My suggestion: Buy new speakers and consider the plastic spheres as nice paperweights, or decorative antiques for your shelf.

I can't configure the resolution on my 34460A DMM with IVI

I'm trying to acquire data from my 34460A using IVI. When I use Configure Measurement, the DMM doesn't seem to be taking the resolution properly. It seems to be setting full range (slow) measurements no matter what I set there. I set the range to 3A and the resolution to 0.0001 but I'm getting measurements in the 4±2µA range
http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=21588
FYI, the non IVI (LabVIEW) driver works fine.

Hello Oligarlicky,
So devices that are IVI compliant are usually advertised as such. Unfortunately, I was unable to find any information or verbiage from the manufacturer's website that indicated the 34460A is in fact IVI compliant. Here's the link for the product page: http://www.keysight.com/en/pd-2269458-pn-34460A/digital-multimeter-6-digit-basic-truevolt-dmm?cc=US&...
Additionally, it seems on the link you provided for the drivers, under the IVI drivers, it lists the models that have been tested with the IVI drivers. It turns out that the model in question, 34460A, has its tested status listed as "Blank". See attached photo:
From what I've gathered, it seems that the 34460A is most likely not compatible with IVI drivers. At least the LabVIEW Plug and Play drivers work. Was there any reason you wanted to use the IVI drivers over the LabVIEW Plug and Play drivers?
Regards,
Jae

Can I use my computer speakers with iPhone?

A friend gave me his old iPhone, and I wanted to play music through my computer speakers. The speakers aren't plugged in to the computer, just directly in to the iPhone. My old iPod will do it, but the iPhone won't. The sound just comes through the iPhone speaker. Is the iPhone able to play music through speakers?

Is the iPhone able to play music through speakers?
Yes it is. However the 1st gen iPhone (if that's what you have) had a recessed headphone socket and you will probably need a skinny little adaptor to get the jack plug from your speakers into the port. Hence the reason the sound is still coming out of the phone as you haven't got your jack plug far enough in. I recently found an adaptor at an airport for my phone but you'll have to look around to find one I suspect.

Can I configure WS-Sec authentication via Active Directory with OSB or OWSM

Hi
I'm planning a project where I need to add security to a group of proxy services in OSB. I need to authenticate them via WS-Security using Active Directory. Is this possible with OSB or adding OWSM?
Regards,
Néstor Boscán

Hi.
OSB http://docs.oracle.com/cd/E23943_01/dev.1111/e15866/model.htm#i1088877
OWSM
http://docs.oracle.com/cd/E17904_01/doc.1111/e15866/owsm.htm
and
http://docs.oracle.com/cd/E21764_01/web.1111/e13713/owsm_appendix.htm
hope this helps
best
rolando

How can I iMessage from iPhone to iMac or iPad with same apple ID?

Hello!
I have an iPhone, iMac, and iPad with the same apple ID. How can I message between them with out having a duplicate message from "me" showing up on all my devices at once.
Is it possible to iMessage between two devices with the same apple ID?
Thank you for any help.

HI,
I do it similar to that on my two iPhones.
I had an Apple ID (based on an old Dial up account.)
I linked this to iCloud and got an @me.com address as well.
Although iCloud, iTunes and logging in here as Apple Support Communities all end up at the same place whether I use the dial-up email address or the @me.com one, the iMessages server treats them like two separate IDs
One phone then uses thre @me.com name and the other uses the old Dial-up ID
Now that Apple have also given me an @icloud.com name I could use that on my iPad.
8:24 PM Tuesday; December 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Can't configure 7.1 speakers correctly (all speakers with same outpu

Similar Messages

Maybe you are looking for