Can't configure a SCXI chassis (PXI-1010) with a PXI-8176 and a PXI-6052E.

I have a PXI-1010 chassis with a PXI-8176 running Windows 2000. In the rightmost PXI slot, I have a PXI-6052E. The remaining PXI slots are either empty or have misc. modules in them. I have a SCXI-1520 in the leftmost SCXI slot.
I am trying to get MAX to recognize my SCXI chassis with the SCXI-1520. When I try to add the SCXI chassis in MAX by right-clicking "Devices and Interfaces" or "NI-DAQmx", I leave the communication mode to communicate on the PXI backplane, choose SCXI slot zero, and find that the communication device field is greyed out where I want to choose the PXI-6052E. For some reason,the wizard used to add an SCXI chassis does not see my PXI-6052E pluged in to the leftmost sl
ot. Strangely, MAX does see the PXI-6052E in the "Devices and Interfaces" tree. I verified that the 6052E is working correctly. I also verified that the pxisys.ini file is in the WINNT directory. What is the problem?

I am first trying to install the SCXI chassis using the SCXI 1520 user manual. I put a PXI-6052E in the right-most PXI slot and the SCXI 1520 in a SCXI slot. On page 1-12 of the SCXI-1520 user manual, it instructs me to power up the chassis, right-click on MAX "devices and interfaces", choose the correct chassis, and click finish. The problem is, after I click finish, a window appears that forces me to choose a DAQ device. The SCXI chassis doesn't configure correctly because the wizard doesn't see the PXI-6052E.

Similar Messages

I PXI 1010 with Digital Osci, RIO cards. Any simple projects to illustrate PXI with Signal Express and/or using Digital Osc.?

I have PXI 1010 with card for Digital Osc. Also have ELVIS. Any suggestions on oa simple project to illustrate applications of PXI - using Dig OSc and/or ELVIS. Any suggestions to illustrate PXI with Signal Express exercises. This is for undergraduates in EE Engg.

Hi, yes, that does help, thank you for your reply. Signal express does make it easy to work with multiple devices, as I am, though something seems to be amiss with the timing between cards. For example, setting Signal Express to do nothing more than log data at 100 pts/sec on all channels on all three cards (PCI-6289), and using the software trigger in Signal Express to start the digitization process, and the stop button, to stop data logging, certainly seems to be a very convenient solution. However, the longer I record (an hour seems to be enough time), the more likely that a signal recorded on all three cards, will not synch, point to point, (comparing signals recorded on channel 0 on all three cards, which I believe should be captured simultaneously through out the recording process, for example) and data recording does not stop simultaneously on all three cards. I can handle the data logging not stopping simultaneously, but my source signal apparently not being recorded synchronously is a whole other problem, and the impetus for my question. Thanks for the tip about NI-SCOPE, I was going to start working with that on a different project.
I am using the most recent versions of SignalExpress, NIDAQmx drivers, etc., on a PC running 64-bit windows 7.
regards,
Brian

Please can someone help me out. I initial configure my bluetooth stereo ear piece with my iphone 4 and it was working but I mistakenly forget the bluetooth device and I cannot reconfigure it again with my iphone 4.

please can someone help me out. I initial configure my bluetooth stereo ear piece with my iphone 4 and it was working but I mistakenly forget the bluetooth device and I cannot reconfigure it again with my iphone 4?

place the device in pairing mode and re-pair.
If you don't know how to do this, go to the manufacturer's website and download the user guide for your device.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

I only show one iCloud on my IPhone that can do a restore. I synced it with my MacBook Pro and I think that may have messed things up. Prior to that I have several backups. Will a "genius" be able to access the info I need?

I only show one iCloud on my IPhone that can do a restore. I synced it with my MacBook Pro and I think that may have messed things up. Prior to that I have several backups. Will a "genius" be able to access the info I need?

If things seem to be going haywire with your phone, it seems that it MAY be a software issue.
Now, that being said, that does not necessarily mean that it is a virus. Software issues do happen sometimes. It is probably just coincidence.
What you need to do is restore the device using iTunes. This will fix any software issues. After you have done this, you can restore from an iCloud backup.
iCloud does not back up the actual software, so no, the "virus" would not have gotten into the backups.
The link below provides steps on restoring your device using iTunes as well as how to restore from an iCloud backup.
http://support.apple.com/kb/ht1766
Don't worry! Everything should be back to normal if you follow these steps.

Is there any way i can reset my i pod or open it with it being disabled and i dont have password, is there any way i can reset my i pod or open it with it being disabled and i dont have password?

is there any way i can reset my i pod or open it with it being disabled and i dont have password, is there any way i can reset my i pod or open it with it being disabled and i dont have password?

You will need to restore your iPod from the same computer that you most recently synced to.
Read this: http://support.apple.com/kb/ht1212
If you can't sync then you will need to try recovery mode.
Read this: http://support.apple.com/kb/ht4097

I would like to ask if is possible to predict a future version of iOS can have the possibility to choose the color with which to write and be able to choose the character also...

I would like to ask if is possible to predict a future version of iOS can have the possibility to choose the color with which to write and be able to choose the character also...

Nobody here would have a crystal ball and know what Apple plans on doing in the furture.
If you feel this feature is so important, you can let Apple know:
www.apple.com/feedback

How do I sort out 'Apple ID disabled for security reasons' after I had my old Email address and password erased but still showing ?? now I can't access my apple store Apps updates with new email address and password??

How do I sort out 'Apple ID disabled for security reasons' after I had my old Email address and password erased but still showing ?? now I can't access my apple store Apps updates with new email address and password??

You might try contacting App Store Support: http://www.apple.com/support/mac/app-store/

Error-200284 for PXI-1010 MXI-3 fiberoptic connection to a PXI-6533.

In the instruction lab in which I work, we have two types of systems:
1)SCXI-1000 chassis connected by copper to a PXI-6035E card in a PC.
2)PXI-1010 chassis connected by fiberoptic from a MXI-3 to a PXI-6030E card in a PC. A PXI-6533 handles the digital I/O.
We have LabVIEW8.5.1 running on both types of systems. On the SCXI-1000 system, the LabView example Acq&GraphVoltage-IntClk-DigStart.vi runs just fine. It does not run on the PXI-1010 systems. Instead, I eventually get Error-200284. In both cases we use PFI0 or PFI1, and digital ground, for the triggers, connected to lines 38, 39, and 33, respectively, in the SCXI-1302 terminal block, which connects to an SCXI-1180 feedthrough panel.
I searched the forums and all ni.com for information on this problem, and have not been able to find any relevant information.
Joseph D. Rudmin

Hi Joseph,
I think I'm starting to understand the problem you are having. Unfortunately, since on a SCXI module, all channels are generally multiplexed through AI0, the PXI/SCXI backplane only shares the necessary channels i.e. one AI channel and any required timing signals. Therefore, even if though you are using the SCXI-1180 module with a SCXI-1349 communicating adapter, you will not be able to access the other channels on your PXI-6030E since there is no physical connections being made to those channels in the backplane. There are 2 solutions around this problem:
1. You can use an SCXI-1349 cable assembly to connect the front of the PXI-6030E module to the back of the SCXI-1349 adapter. This way the unused pins on the DAQ module can be accessed through the SCXI-1180.
2. You can decide not to use the SCXI-1180 and simply use a standard 68-pin terminal block with your PXI-6030E and connect your 5V sync pulse to the PFI pins. This will still allow you to sample off of the SCXI-1100 since those channels are connected via the backplane.
Here's a link to our online KnowledgeBase article which talks about this issue.
Can I Connect The SCXI-1180 To An SCXI Module In A PXI-1010 To Use The Additional Analog Input Chann...
Please let me know if this answers your question.
S_Hong
National Instruments
Applications Engineer

Can you manually advance a Captivate slide presentation with a remote control and a projector.

I have published a large volument of PowerPoint presentations with Captivate 5.0 and intend to distribute the presentations to live instructors as a means to control content delivered live by instructors to the students. The files are aggregrated into groups of lessons and published to PDF with a Table of Contents.
We need to avoid manually advancing the show from the laptop.
Having difficulty determining how to use remote control via laptop and projector to advance the next slide or presentation. Can't get it to work. Was able to do so previously with PowerPoint slides converted to PDF shows. Remotes/Laser pointers worked fine. But now that I have processed the shows through Captivate 5.0 can seem to find a remote that will work with the new PDF or SWF with our systems.
We use a laptop and projection system, so need to be able to advance the show to the next "slide" manually and are trying to figure out how to do it with a remote control.
Has anyone else experienced this challenge and did you find a solution?.

Hi Carey,
if you can apply the letter "A" for "next" to your remote control?
Then you could add a shortcut to your buttons in the captivate file.
In deapth:
Go to a PPT importet slide (using the "click mouse" option to continue".
Click somewhere in the screen (clickbox_xx will be selected).
Properties - Action - Shortcut. Click it and press "A".
Click somewhere on the stage.
Now when you press your next button on the remote, Captivate will receive an "A" and continue to the next slide.
Hope this helps
Best
TD

Can I buy a Lightroom upgrade (from LR3) with a perpetual licence and a student discount? If so, which page do I need? Thanks.

I am trying to buy a Lightroom upgrade (from LR3) with a perpetual licence and with a student discount.
If I go the student discount route on the web U get taken to the 'cloud' options which I don't want.
Any help would be appreciated.
Thanks.
PS Is the upgrade worth it in any case??

I believe there are NO upgrades for Student and Teacher editions but you can see here: Products
If the price is the same as an ordinary upgrade you are probably better off buying that because it can be upgraded in the future.

Can we unlock an iphone which one locked with an email address and password.I have no idea about the email address and password for the icloud

can we unlock an iphone which one locked with an icloud email address and password.I have no idea about the email address and password for the icloud.can any one help me about this.

It sounds like you are talking about an iPhone that has been Activation Locked. This article explains:
http://support.apple.com/kb/PH13695
If so, the iPhone can never be unlocked without the original Apple ID and password. This is an anti-theft measure.

How can I confirm that my extensions are compatible with FF ver 4 and ver 5 before I upgrade?

When I have upgraded in the past I have been affected by extensions that do not work in the new version. How can I determine if my extensions are compatible with new versions. I have looked at knowledge base and other help but I can find nothing.

Thanks, Forewarned is forearmed.
Checking my incompatible extensions now seems to be less than when I just casually reviewed the list. Perhaps authors are still updating their products.
Most of my incompatible extensions are not critical. Perhaps the most important is AARDVARK which I use extensive prior to printing bank statements.
My incompatible extensions are:
Aardvark
Colourful Tabs
Image ToolBar
MS .NET Framework Assistant
Quick Page Zoom
Rewind/Fastforward Buttons
Windows Update

Can't add simulated SCXI chassis in MAX

Hi all
I wanted to test some hardware by simulating it on my workstation. I'm using Labview 8.2 and MAX 4.1.0
When I try and simulate the SCXI 1000 chassis, the first dialog box appears with the chassis communicator dropdown control greyed out. The chassis address box is available. When I try and save it keeps asking to select a communicating DAQ device but it doesn't seem to have a spot for that. I don't know if I'm missing something or if I need an update to MAX. Anyone had this issue?
Thanks in advance
Chuck

Hi Chuck,
You're right... the SCXI 1600 cannot be simulated according to the following KnowledgeBase article:
What are NI-DAQmx Simulated Devices and How Do I Use Them?
Are you having trouble simulating any of the other modules, or just the 1600?
- Greg J

How can I configure a third party VME board with A24 address space using a VME-MXI-2?

Hi!
We are trying to establish communications to a Galil Motion controller with a VME interface. Galil states that they are using a A24 address scheme with A16 data space for their board.
I am confused how to configure that board in the VME chassis properly.
The base address provided by Galil is 91Fxxx, I am assuming that the lower three nibbles are the registers that I can talk to?!
How do I set the address range under the resource setting for that board?
Also, I noticed in MAX that one board shows up with a slot number unknown, one with slot #0 and this board I have set to slot #1. I assume that the unknown part is for the PCI card that makes up for the 1/2 of the PCI to VME bridge?
The VISA VIs (Register based access) returns either a bus error, an invalid offset specified or data. However, we are completely in the dark when it does return data, since the expected offset we are typing in causes one of the two errors.
Our assumption of the problem is that we do not understand how to properly configure that third party board as a resource. It has also happened that the resource manager is hanging up the PC completely. Not even CTRL-ALT-DEL works and the MXI activity LED on the NI-VME-MXI-2 board stays on during the hand up.
We would appreciate, if somebody could walk us through the configuration process, step-by-step. Specifically, please explain how to setup the base address and how the offsets relate to this on a A24 address scheme. We are completely new to the VME bus interface, so even trivial things may be unkown to us.
We have browsed NI's page and manuals for explanations, however, we could not find any answers to our questions.
We noticed a formula for an A16 board that takes the base address and adds the logical address to it plus 40hex. Do we have to do the same or something similar to the A24 board????
We also came accross an option that would allow the board (NI VME controller) to share its memory with A24 or A32 space? Do we need to enable that? What is the purpose for that?
Best,
Markus Tarin
www.movimed.com - Custom Imaging Solutions
www.movitherm.com - Advanced Thermography Solutions

When I did not get a response here, I had to open a ticket with support. The short answer is that you cannot customize the SAML response when using Azure AD as an IdP.
Response from support:
I discussed the issue with senior engineers to get action plan for this issue. After doing research Senior engineers updated me that we cannot add a custom attribute to the default
SAML response of Azure AD.
Below is the link to get the list of available attributes
https://msdn.microsoft.com/en-us/library/azure/dn195587.aspx
As default SAML response from Azure AD , we have email address of the user sent out as attribute value for the Attribute " NAME ".
They suggested me to configure the application we are trying to integrate with Azure AD in such a way that it transforms the Attribute " NAME " into " EMAIL
This was not particularly helpful in my case as I did not have any control over the 3rd party which specifically documented that they would not extract the email address from the name attribute.
Cheers,
Jeff

Can't configure a SCXI chassis (PXI-1010) with a PXI-8176 and a PXI-6052E.

Similar Messages

Maybe you are looking for