Can't configure an IP in the 172.0.0.0 range on a Catalyst Express 500g

Hello,
I have 4 catalyst Express 500G-12TC switches that I am configuring for the first time. I am able to access the initial web setup screen, but when I enter the static IP address (172.16.9.x) that I want to assign to the switch I receive the following error:
"The IP address in the 172.0.0.0 network cannot be configured on this switch."
I have the following information entered:
IP 172.16.9.7
Subnet Mask 255.255.255.0
GW 172.16.9.2
I tried looking in the troubleshooting guide for this switch, but was unable to find anything specific to this error. Does anyone know why I'm unable to configure this IP?
Thanks,
Louis

You cannot give an ip address to the switch in the subnet
10.x.x.x and 172.x.x.x because both are reserved for management.
http://www.cisco.com/en/US/docs/switches/lan/catalystexpress500/release_12.2_25_fy/user/guide/install.html#wp84244
http://www.cisco.com/en/US/products/ps6545/products_configuration_example09186a00806da6c9.shtml#initial

Similar Messages

  • Can I configure firefox to download the content of my RSS feeds rather than display it?

    With IE, I am able to have the actual contents of my RSS feed downloaded to my PC. I'm not seeing how I can do that with Firefox. If it's possible, can someone let me know how I can do it? Thanks.

    Hi jenmek,
    You used to be able to add "/rss" to the end and bookmark the feed as a live bookmark.
    However if this does not pop up the rss reader, where it asks you if you want to subscribe there is also a few add ons you can add to the Firefox profile to organize RSS feeds: [https://addons.mozilla.org/en-US/firefox/search/?q=rss+live+bookmark&appver=36.0&platform=all]

  • Can we configure/install siri on the new ipad(ipad 3)?

    The new ipad does not contain Siri,but is it possible to install it?If so from where can we do it?

    No, Siri is currently only available on the iPhone 4s, the new iPad only has a dictation function.

  • Can I configure to always delete the master file?

    Hi!
    If I want to delete a file, I don't just remove it from the cataloge, but to delete the master file, too.
    If I use the remove key, I get the (annoying) pop up, what I want to do: (sorry, I've a german version, so I just try to translate it)
    Delete from hard disk
    Remove (default selected)
    Cancel
    Is there any chance to avoid this dialog? Or at least to chance the preselected button, so I've just to use the enter key?
    Actually I've to
    press delete
    press left arrow key
    press enter
    That is a little bit annoying and error-prone
    Thanks a lot!
    P.S.: I just found out, that ALT+DELETE is a shurtcut to remove the file from the catalog. So it would be greate to have a similar shurtcut to delete the file from the filesystem.

    Thanks!
    But it is almost the same as CTRL+ALT+DELETE, which has a special meaning in Windows :-(
    So there is no way, to get a delete action, that easiliy deletes, without pressing four keys in parallel? :-|
    Perhaps, the developers of Lightroom could provide an option, so you get the pop up, but the default action is different. That would be really great.

  • Apple TV 2G (Airplay and Homesharing) can only stream from devices on the same wireless access point range??

    connection:
    40 Mbps Fiber Broadband connection using:
    Devices:
    1. Main Modem/router (AP1): Huawei HG8245 (provided by ISP) - Wireless enabled.
    2. Remote Access point (AP2): Linksys/Cisco E3200 Wireless gigabyte router flashed with DD-WRT v24-sp2 (06/14/11) mini (Cascaded -wired- LAN to LAN from main modem).
    3. Wireless Repeater to cover a dead spot  (AP3): Linksys/Cisco E1000 wireless repeater.
    4. Apple Tv (AT2G) with home sharing/airplay enabled.
    5.( Ipad) with home sharing on itunes enabled.
    6. Win7 (PC) using iTunes with Home sharing enabled.
    all devices are updated to their latest firmware.
    In order to cover a large 3 story house with Wifi. I had (AP1) is located on the first floor, while (AP2) is located in the basement floor directly wired by LAN to LAN with (AP1). (AP3) is located on the Ground floor away from the living room to repeat wireless network into the back yard. While (AT2G) is located in the living room on the ground floor right in the middle of both (AP1) + (AP2) while connected via Wifi.
    Network SSID, security, passphrase and wireless settings of (AP2) are identical to (AP1) to create a single big LAN/WLAN roaming network where all devices connected to both wireless access points can find/share the others. As understood, it's refered to as bridging.
    I have noticed that my iphone/ipad does not show the airplay button anywhere within the wireless network. it seems that the apple TV randomly choses to connect to the AP with stronger signal, or switch to the other in case of a reboot to one of them.
    to elaborate further, if i was sitting in the living room (groundfloor), trying to airplay some you tube contents via Wifi to my Apple TV, i may not find the airplay button available all the time, i found out the reason is while i'm wirelessly connected to AP1, the Apple TV was connected to AP2 and both deviced cannot detect each others to enable my purpose. that goes the same for Home Sharing. only if my Ipad/PC and Apple Tv are on the same wireless AP. they would detect each others immediately.
    although, the second AP (AP2) is suppose to extend my wireless network of the same subnet in which any device connected can be found.
    After all sorts of trial and error tweaking my router/access point, I thought the problem would be due to the Linksys 3200 capability of bridging WLAN and lacks few protocols that enables my purpose. i have flashed the firmware to a DD-WRT, but again, problem was not solved.
    I have not tried having my Apple Tv wired to either router/AP, but i assume it may work well if i do so. i still need to solve this wireless connection issue though.
    Am i the only one with this problem, would there be something wrong with my setup? 
    Your feedback is highly appreciated.

    You may or may not already have your network set up correctly, it's just that I can't tell from what you have said.
    I have a main router provided by my ISP, I have several other Airport Extremes and Airport expresses connected by Ethernet, all set up to bridge the network created by the main router.
    Each maker has their own settings, but bridging should be reasonably obvious. In simple terms my main router distributes IP addresses to all devices, the Airports bridge that network by passing these addresses to the devices from the main router. A base station that isn't in bridging mode will distribute its own addresses to the devices connected to it.
    I don't really follow your next point.
    instruction for configuration vary from manufacturer to manufacturer, the best course of action here is to refer to the manual. If everything is set up properly the addresses of everything on your network will have identical sets of numbers for the first 3 of 4 groups of numbers that make up an address, the last set must always be different. I think the part you are referring to with your DD-WRT is the option to have Ethernet and wifi bridged or not.
    Some routers may be easier to configure than others, but generally speaking they should all work with the Apple TV. 5Ghz is less likely to suffer interference but it is much more likely to be blocked by solid objects, it may or may not be an advantage.

  • How can I add an icon in the firefox toolbar to access to I.E. outlook express?

    I'd like to begin using Firefox as my default browser in place of O.E. 7. However, my Google mail account is programmed to feed e-mails to Outlook Express. I can find no way to add an icon to the Firefox toolbar to easily access Outlook Express.

    In my limited knowledge there is no way for a user to add an application to this list. You might try one of these two options.
    1. Use a utility like Cocktail or Onyx to reset the launch services database. This is the database that decides which applications get launched when a file is double clicked. It may be that the Endnote application didn't get recognized. However OS X decides what applications to add to the list based on files types.
    2. The easier solution is to select one of the files you wish to open with Endnote. Right click on the file and select Get Info. Under the "Open with" menu select Other... and navigate to the Endnote application and select it. Now click the Change all button. From now on when you double click your citation file it will automatically open with the Endnote application.

  • Can i configure the appearance/elements of mac os x windows?

    Allright. I'm using 10.4.11 (Tiger) on an iBook G4. In all my windows that open, the vertical scrollbar that appears on the right-side has the 'up' and 'down' buttons situated at the bottom, together, on top of one another. Can I configure it to have the 'page up' button at the top and 'page down' button at the bottom or both buttons at the top? Second, can I configure which side of a window title bar the 'Minimize', 'Maximize', and 'Close' buttons appear on, say left-side or right-side?
    I know, I know ... the whole idea behind owning/using a Mac is to "Think Different" and believe me, I love my Mac, but sometimes I also "like what I like and like it the way I like it!"
    Thanks.  :-)

    On the Scroll arrows, System Preferences>Appearance>Place scroll bars at top & bottom.
    The buttons, no, err... only with use of a mirror!

  • Can VIP and Rservers be in the same subnet in ACE Routed Mode

    Good Day,
    Sorry for the lengthy post.
    Currently I have a 6509s running in VSS mode with ACE30 in each chassis.
    I have 5 vlans, which the VSS is the L3 interface for each. 1 Vlan is for management, the others are the data vlans for the servers.
    The ACE is configured in bridge mode, with all VLANs going to a specific context (non Admin).
    Some of the Host on each VLANs are not utilized for load-balancing. The default gateway for each VLAN is configured on the VSS.
    I would like to setup the ACE in the routed mode, without having to change the IP address of each servers on different VLANs.
    Basically I want to turn off the SVIs on VSS and move the L3 interface on the ACE Context, and let it perform the local routing for all the hosts.
    I was going to add a new /30 L3 interface between the VSS and ACE to be utilized for default route traffic coming from the ACE Context, and static routes from VSS to ACE for traffic destined to host that are being load-balanced and not being load-balanced. Basically force the traffic through the load-balancer in/out.
    For future deployment, I was planning on using different IP address for the VIPs, and Real servers (most likely RFC 1918).
    From most of the examples I have seen the VIP and Rservers are in different Subnets. But because I am trying to not change the IP address of the rservers and VIP, I wanted to know if the VIP and Rservers can be configured to be in the same subnet where the ACE is in routed mode.
    Unfortunately I don't have a spare ACE to test scenario.
    As always any help would greatly be appreciated.
    Regards,
    Raman

    Link-local addresses are usually the self assigned IP address that a device will set when a DHCP server cannot be found. These are the addresses with 169.254.x.x subnet.
    If the router is assigning IP addresses for your network, then they will usually have a different IP subnet, possibly 192.168.0 for D-Link. And this subnet would be for the wired and wireless connections. So it would be more a case of bridging the two network topolgies rather than routing them.
    The network host is busy message could be more to do with the driver and the IP protocol selected when creating the queue than the connection being broken between the Mac and printer. If you were to open Network Utility and select the Ping tab, enter the IP address of the HP and set the pings to 4, pressing the Ping button will soon show if there is a path through the wireless to the printer.
    If you get a response to the ping you could then open Safari and type the ip address as the URL. This would then connect to the internal web page of the printer and possibly let you enable an IP protocol like LPR so that you can use LPD on the Mac instead of Bonjour to connect to the printer.
    As for the driver, you could look at using a Gutenprint driver instead of the HP driver or the hpijs package to get past the limitations that some printer drivers have with network connections.

  • After downloading Adobe Reader, Can't Configure Reader

    After downloading Adober Reader, during install, it puts up an error saying that it can't configure itself.

    Try using the installer from http://get.adobe.com/reader/enterprise/
    If you are still getting errors, please tell us what OS you use.

  • How can i configure DAQ card other then NI using MAX

    Hi,
    I am using Advantech DAQ pci1711, can i configure this card using NI MAX. I am getting problem with its port specification while writing VI's because could get channel port addresses.

    MAX can only configure cards that use the Traditional NI DAQ and DAQmx.  Advantech uses their own drivers.  Does Advantech have a utility for setting up their PCI cards?
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • HT3382 With a MacbookAir (mid-2012) using a mini DisplayPort to VGA adapter plugged into the Thunderbolt port, can you configure the external monitor to FULLY display in portrait mode yet keep the built-in display in landscape mode?

    With an 11"-inch Macbook Air (mid-2012) using a mini DisplayPort-to-VGA adapter plugged into the Thunderbolt port:
    Can you configure an extended desktop with an external monitor (20") displaying full portrait mode (1200 x 1600 resolution) and keep the built-in display in landscape?
    I'd like to see something like
    External monitor / Built-in display

    Yes, I can't see why not.
    Just give it a try and report back if you have a problem.

  • How can I configure FireFox security setting globally for all users on a PC? Is there something I can do in group policies or throught the registry to insure all users have the same settings?

    Our Bank's core processor has rewritten their product to run in a web browser. Their browser of choice is Firefox 3.6. The specifications from our core processor specify specific security and settings parameters that must be adhered to by all users for their product to run properly. Is there a way to globally configure these settings via the registry or group policies to insure everyone who logs in to a given workstation opens Firefox with the same settings? Thank you for any assistance you can provide - Steve Gish, First Bank Kansas.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    You can try:
    *http://kb.mozillazine.org/Locking_preferences

  • How can I configure my new Mac Pro to output the timeline via HDMI

    How can I configure my new Mac Pro to output the timeline in FCP 7 (yes, I have X, but I'm using 7 right now). I have two monitors running from TB2, but want to have the third for a client monitor.
    If I use all three via TB2, it's literally three monitors, and I want to edit on my CineDisplay. I only want the client to see the timeline video on the third monitor. When I hook up HDMI I get no signal, in fact, I can't have the HDMI cable hooked up for TB2 to work with the third.
    Thanks,
    GEvans
    DarthPro
    3.7 QCIntelXeonE5
    12 GB
    AMD FirePro dual D300 2048MB
    OSX 10.9.2

    If you use all ThunderBolt displays, or stick with DisplayPort and Mini DisplayPort (free conversion between the two with only a cheap cable) you can have up to six displays.
    If you attach "legacy" displays with "any-old adapter", you can have up to two, and the built-in HDMI counts as one if you use it.
    Any more requires ACTIVE Adapters.
    The US$100 Apple ACTIVE Mini DisplayPort to Dual-Link DVI adapter works in every case, even displays over 1920 wide.
    StarTech and Accell make US$35 ACTIVE adpters that work for displays up to 1920 wide.

  • How can i print a network configuration page , i need the IP on a ph1510

    how can i print a network configuration page , i need the IP on a ph1510

    Hi,
    What is the exact printer model?
    If it is the HP Deskjet 1510, this is a USB printer and it does not offer any network capabilities.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HT4356 How can I configure the printer to print only grey tones from my iPad 2? Printer=Hp6520

    How can I configure printer with iPad to print only grey tones? This works fine from my laptop - not air printing from that one though.  I can't find anywhere on the iPad how to do printer settings and this also seems not to be available as an option when doing a printout.  In fact, no options seem to be available.  Thanks in advance for reacting!
    Hermi

    There is currently no option for this. You can give Apple feedback here:
    http://www.apple.com/feedback/ipad.html

Maybe you are looking for