Can't configure EM 10.2.0.3 with EMCA, wrong password

Hello,
I have a 2 node RAC.
Used the following to create the EM :
emca.bat -config dbcontrol db -repos recreate -cluster
STARTED EMCA at 3-dec-2007 16:23:59
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database unique name: PSDBPRD
Listener port number: 1521
Cluster name: PSDBPRD
Password for SYS user:
Password for SYS user: Invalid username/password.
Password for SYS user:
Password for SYS user: Invalid username/password.
Password for SYS user:
Password for SYS user: Invalid username/password.
Password for SYS user:
Password for SYS user: Invalid username/password.
Password for SYS user:
Password for SYS user: Invalid username/password.
Password for SYS user:
But the password is ok, I can open an sqlplus with this sys / password combination with no problem. But emca does not work.
I also created the password files again.
any ideas ?
Thanks,
Kristof

I am having the same issue. Did you ever find an answer?
EM works, log in as sys user and password with NORMAL - I get in.
If I try As SYSDBA- it says invalid username/password.
From SQLPLus - the user name works and lets me in (with / as sysdba or not)
SQLPLusW - sys user and password - lets me in.
I cant create the EM because it requests the sys password with it will not accept.
Is there a way the passwords are out of sync?
Paul

Similar Messages

I cannot connect my iPhone 4S to my home wifi. When trying to connect it says I have the wrong password, but I can connect my MacBook to the same network with the same password. I have tried to restart my router, reset my network settings, fail!

Hello, I am having some major troubles connecting my iPhone 4S to my home wifi. When I try to connect on my phone, it says I have an incorrect password. That's not possible because I can connect my MacBook to the same network with the same password. I have reset my network settings on my phone, reset my router, called apple support, triple checked I was trying it in correctly, I have no clue what's going on.
The only thing different is I just moved, but I have the same router/phone/internet provider.
I've seen some discussions of router security options being the problem, I have my router connected to : WPA-PSK [TKIP] + WPA2-PSK [AES].
The other options are: WEP , WPA-PSK[TKIP] , WPA2-PSK [AES] , WPA/WPA2 Enterprise.
My troubleshooting and understanding of all this is pretty limited, my applecare service did not help, please can anyone help me?
Thanks!

If the issue happened after an update, you may want to go into an Apple Store. Be sure to let them know exactly what's wrong with the device.

Can i lock an app on my iPhone with a different password than the one i use to lock my phone?

can i lock an app on my iPhone with a different password than the one i use to lock my phone?

This should work; one of my e-mail accounts is my own domain through Gmail. Make sure your username is set to your full e-mail address (like [email protected]) rather than just your username.
Did you set it up on your iPhone as an IMAP account, or as a Gmail account? It should work perfectly using the Gmail setting. It can work as IMAP, but you need to jump through a few hoops to get there.

Trying to restore my old ipod mini so I can recycle it. But it is locked with my old password, long forgotten. Do I have to reset my current pw

Trying to restore my old ipod mini to factory settings, so I can recycle it. But it is locked with my old password, long forgotten. Do I have to reset my current pw & will that unlock my old mini if I do? Would appreciate detail. Thank you.
PS: It was windows based, I'm now on imac.

I've tried a lot of the stuff mentioned at that link and elsewhere, modifying host files etc. trying to downgrade my iPhone 4 back to 5.1.1 no luck , apple has locked up 5.1.1 for my phone and iPad . one post said I'm "stuck with iOS 6" darn I should have been more careful. I have the 5.1.1 Ispw on my MacBook its a permissions thing I don't understand. I'll post when I find a way around it and I will . iOS 6 took away most of my AirPlay functionality . to hek with iPhone 5 I'm starting to look at android. big bummer apple

Can't configure both WAN ports on 1811 with SDM

Hi,
We recently procured an 1811 router to replace a SOHO linksys at a store we service. We needed redundant WAN interfaces to use the DSL as a backup to the main cable connection, and a Linksys RV082, while doing the job when it actually worked, died repeatedly. We decided after looking at the 1811's feature set to just get the Cisco and be done with it and not monkey with SOHO gear anymore.
Where I'm having difficulty is SDM won't let me configure both WAN interfaces from the GUI, it only allows me to configure one. I have it configured, and the router is working nicely in the test lab but I need to get that other interface configured and failover enabled before I can put this thing into production.
What am I doing wrong? Do I need to suck it up and learn IOS?
Thanks,
Todd Phipps
Certco, Inc.

I ended up figuring out the IOS commands to enable one fastethernet port as a primary and the other one as a backup (running both cable and DSL for redundancy; it's a grocery store that runs electronic transactions over IP so 100% availability is a must).
The trouble I was running into in SDM is that while it would allow me to configure one WAN port through the GUI, the config options for the second one were grayed out. Now that both are configured through IOS the edit buttons for both WAN interfaces appear normally in SDM. It's almost as if Cisco didn't want users to be able to configure both interfaces graphically for initial setup.
Now just to test it at the site before the store opens to see if the failover works...
Todd

Can you configure a static port to use with certsrv.msc?

I am trying to use certsrv.msc to connect from my workstation to the CA for administration purposes. Workstation is Win7, CA is 2008 R2 Enterprise running Enterprise Subordinate on a dedicated box.
I configured a static DCOM port for certsvc by following this article, including bouncing the service and also rebooting the CA box:
http://social.technet.microsoft.com/wiki/contents/articles/1559.how-to-configure-a-static-dcom-port-for-ad-cs.aspx
The static port was opened in the firewall from my workstation to the CA. We also found that TCP 445 was required, so that has been opened as well, port 135 & other ports normally needed for autoenrollment should be open. Sniffing the firewall
showed that a random high numbered port that is not the static dcom port is being attempted - this is the only port showing dropped packets & no traffic on the static port.
I am wondering if there is a way to configure a static port for this high-level random port to use with certsrv.msc as I was able to do with the certsvc dcom port? I am trying to avoid having tens of thousands of network ports wide open going to my
CA... Thanks in advance!

Hi Steve,
I am sorry that I wasn’t able to find references about restricting certificate services only use one port in the random port range.
However, we can configure RPC dynamic ports allocation to restrict port range. In the meantime, we should keep at least 100 ports open to keep necessary system services running.
More information for you:
How to configure RPC dynamic port allocation to work with firewalls
http://support.microsoft.com/kb/154596/en-us
Service overview and network port requirements for Windows
http://support.microsoft.com/kb/832017/en-au
Firewall Rules for Active Directory Certificate Services
http://blogs.technet.com/b/pki/archive/2010/06/25/firewall-roles-for-active-directory-certificate-services.aspx
Best Regards,
Amy Wang

How can I configure a third party VME board with A24 address space using a VME-MXI-2?

Hi!
We are trying to establish communications to a Galil Motion controller with a VME interface. Galil states that they are using a A24 address scheme with A16 data space for their board.
I am confused how to configure that board in the VME chassis properly.
The base address provided by Galil is 91Fxxx, I am assuming that the lower three nibbles are the registers that I can talk to?!
How do I set the address range under the resource setting for that board?
Also, I noticed in MAX that one board shows up with a slot number unknown, one with slot #0 and this board I have set to slot #1. I assume that the unknown part is for the PCI card that makes up for the 1/2 of the PCI to VME bridge?
The VISA VIs (Register based access) returns either a bus error, an invalid offset specified or data. However, we are completely in the dark when it does return data, since the expected offset we are typing in causes one of the two errors.
Our assumption of the problem is that we do not understand how to properly configure that third party board as a resource. It has also happened that the resource manager is hanging up the PC completely. Not even CTRL-ALT-DEL works and the MXI activity LED on the NI-VME-MXI-2 board stays on during the hand up.
We would appreciate, if somebody could walk us through the configuration process, step-by-step. Specifically, please explain how to setup the base address and how the offsets relate to this on a A24 address scheme. We are completely new to the VME bus interface, so even trivial things may be unkown to us.
We have browsed NI's page and manuals for explanations, however, we could not find any answers to our questions.
We noticed a formula for an A16 board that takes the base address and adds the logical address to it plus 40hex. Do we have to do the same or something similar to the A24 board????
We also came accross an option that would allow the board (NI VME controller) to share its memory with A24 or A32 space? Do we need to enable that? What is the purpose for that?
Best,
Markus Tarin
www.movimed.com - Custom Imaging Solutions
www.movitherm.com - Advanced Thermography Solutions

When I did not get a response here, I had to open a ticket with support. The short answer is that you cannot customize the SAML response when using Azure AD as an IdP.
Response from support:
I discussed the issue with senior engineers to get action plan for this issue. After doing research Senior engineers updated me that we cannot add a custom attribute to the default
SAML response of Azure AD.
Below is the link to get the list of available attributes
https://msdn.microsoft.com/en-us/library/azure/dn195587.aspx
As default SAML response from Azure AD , we have email address of the user sent out as attribute value for the Attribute " NAME ".
They suggested me to configure the application we are trying to integrate with Azure AD in such a way that it transforms the Attribute " NAME " into " EMAIL
This was not particularly helpful in my case as I did not have any control over the 3rd party which specifically documented that they would not extract the email address from the name attribute.
Cheers,
Jeff

Can we configure the system to create order with reference ony?

Hi,
Do you know if we can do anything in the sales order type configuration to force the system not allow to create the sales order without reference?
Thank you.

Yes, You can do that. Go to define sales document type and select proper drop down in reference mandatory field. You can create with reference of sales order, quotation etc

Can't configure a SCXI chassis (PXI-1010) with a PXI-8176 and a PXI-6052E.

I have a PXI-1010 chassis with a PXI-8176 running Windows 2000. In the rightmost PXI slot, I have a PXI-6052E. The remaining PXI slots are either empty or have misc. modules in them. I have a SCXI-1520 in the leftmost SCXI slot.
I am trying to get MAX to recognize my SCXI chassis with the SCXI-1520. When I try to add the SCXI chassis in MAX by right-clicking "Devices and Interfaces" or "NI-DAQmx", I leave the communication mode to communicate on the PXI backplane, choose SCXI slot zero, and find that the communication device field is greyed out where I want to choose the PXI-6052E. For some reason,the wizard used to add an SCXI chassis does not see my PXI-6052E pluged in to the leftmost sl
ot. Strangely, MAX does see the PXI-6052E in the "Devices and Interfaces" tree. I verified that the 6052E is working correctly. I also verified that the pxisys.ini file is in the WINNT directory. What is the problem?

I am first trying to install the SCXI chassis using the SCXI 1520 user manual. I put a PXI-6052E in the right-most PXI slot and the SCXI 1520 in a SCXI slot. On page 1-12 of the SCXI-1520 user manual, it instructs me to power up the chassis, right-click on MAX "devices and interfaces", choose the correct chassis, and click finish. The problem is, after I click finish, a window appears that forces me to choose a DAQ device. The SCXI chassis doesn't configure correctly because the wizard doesn't see the PXI-6052E.

How can you configure a WD external to work with Time Machine??

I have an 1TB external WD MyBook drive that is connected to my network through my Linksys wireless router and am trying to figure out how to format the drive to use with Time Machine.
I currently use the drive to store files from both my PC and my MacBook but can't seem to select the drive to use with Time Machine. I figured that I could just format the drive through the Disk Utility program, but the drive doesn't show up in Disk Utility. This may be because it is a drive connected through my router and not directly to my MacBook?!
Here are a few questions...
Any ideas on how to format the drive so it will work with Time Machine?
Once formatted to use with TM, can I still use the drive to store other files from both my Mac and PC? or do I need to partition for this??
Is it possible to set up an automatic backup schedule that will happen via my home wireless connection?
Thanks in advance,
Todd.

You cannot use the drive with TM as you have it set up. TM will not work with a networked drive except a Time Capsule or a USB drive connected to an Airport Extreme Base Station (current version.)
If you wish to use this drive for TM backups it must be connected directly to the computer. Other computers on the network can access the drive for TM backups if you turn on file sharing for the drive (select drive, press COMMAND-I, check the box labeled "Shared Folder," click on the Enable button.) The shared drive will have to be mounted on the other computers in order for them to use it as a TM backup drive.

How can i configure FMS to stream h263/4 with mp3 videos?

Hi,
I have installed Flash media server 3.5, and i have put my vod files under
'C:\Program Files\Adobe\Flash Media Server 3.5\applications\vod\media'
the sample file under this folder given by fms 'sample.flv' is playing fine, (this has VP6 as video codec, mp3 as audio)
"rtmp://my_SYSTEM_IP/vod/sampl"
where i have kept my own file called 09.flv which has H263/mp3, and one more 09_1.flv, which has H264/mp3. But both of the files are not streming. When i tried to play these over vlc it sayes file not found.
But sample video plays.
Is there any way to make work vod files to stream? please help...
Thanks

Hi all,
Thanks for the answer.
as i said, i can play the VP6 codec files like this
rtmp://MY_SYSTEM_IP/vod/filename
but if the file has h264/h263 codec then
rtmp://MY_SYSTEM_IP/vod/filename
will not stream at all.
Also i tried streaming mp3 files
rtmp://MY_SYSTEM_IP/vod/mp3:filenam.mp3
and this does not stream. but
"rtmp://MY_SYSTEM_IP/vod/mp3:filenam.flv" works how come?
When tried of avi, mpeg, mp4, mov files,
"rtmp://MY_SYSTEM_IP/vod/mp4:sample.mpeg", "rtmp://MY_SYSTEM_IP/vod/mpeg:sample.mpeg",
"rtmp://MY_SYSTEM_IP/vod/mp4:sample.mp4",
"rtmp://MY_SYSTEM_IP/vod/mp4:sample.avi" or "rtmp://MY_SYSTEM_IP/vod/avi:sample.avi"
does not work.
Please help. According to the documentation, http://http://www.adobe.com/devnet/flashmediaserver/articles/beginner_vod_fm3.html
both of flv formats VP6, H264 should work. But i am unable to get this work done.
Does anybody tried streaming H264 vod files?
Please help.
Thanks

Why can't I sign into my Game Center with my new password

I Just changed my password now it won't let me into my Game Center?????

Hi Aggrevated77,
Welcome to the Support Communities! I understand you just changed your password for your Apple ID and now you can't log into Game Center. The first thing to do is to confirm your new password is working in other services that use your Apple ID. Are you able to log in at www.icloud.com or in the iTunes Store?
The article below will provide additional steps to try:
FaceTime, Game Center, Messages: Troubleshooting sign in issues - Apple Support
I hope this information helps ....
- Judy

Can I configure my airport network remotely?

I recently set up a network at a museum with 3 Apple Extreme base stations as extenders. Can I configure the network from my home with my iPad?

Thanks for the quick reply. I will try to see if Logmein will let me access the Airport Utility on a local computer and check the network

How can i unlock my dell laptop if i forgot the administrator password?

Dear Sir,
I forgot my dell laptop administrator password and locked out of the laptop, now i have to use my laptop to finish the home work, how can i unlock my dell laptop if i forgot
the administrator password?
Thanks in advance!

Forgot dell laptop administrator password? It would be very frustrated if you are urgent to use the laptop but locked out of it.
Here are the methods
how to unlock dell laptop forgot password. I hope it will be helpful for you.
Method 1: Reset password on your dell laptop with password reset disk
This method only works when you have
created a password reset disk before you forgot password.
<1>. On your dell laptop logon screen, press
Enter directory, and then a password incorrect hint pups up, click on
OK to close it.
<2>. Click
Reset password… bellow the password text box.
<3>. When the password reset wizard appears, click
Next.
<4>. Insert the password reset disk, click
Next.
<5>. Type in
new password, and the new password hint, click
Next, click Finish.
<6>. Then you can login with the new password.
Method 2: Unlock your laptop password with Offline NT Password and Registry Editor
If you have not created a password reset disk before, you can create a live cd or bootable usb with Offline NT Password Registry Editor which is a freeware program. It is base on the text console, so it
may be a difficult to carry out.
Here are the main steps to use Offline NT password registry editor:
<1>.
Get Offline NT Password Registry Editor and use it to create a live cd or bootable usb.
<2>.
Set your dell laptop to boot with the cd or usb.
<3>. Follow the instruction to finish the operation when the password reset program starts.

Can I configure an external drive to be password protected or do I need to buy an external hard drive already password enabled

I asked at a Hong Kong apple shop if they had password protected external drives. They didn't, I bought one anyway.
I'm wondering can I configure this drive. If yes, what do I need to do?

This looks like the easiest and most direct method and since it uses Disk Utility it would work on any OS.
http://osxdaily.com/2012/01/25/password-protect-external-drive-mac-encrypted-par tition/

Can't configure EM 10.2.0.3 with EMCA, wrong password

Similar Messages

Maybe you are looking for