Can't configure personal cloud after firmware uppdate

I recently bought in ix2-device. I uppdated the firmware to version 4.1.108.32627 with the result that I now can't configure a personal cloud.
When I try, the browser opens the domain https://portal.iomegacloud.com with an error message saying the page can't be displayed.
Something must have gone wrong at the uppdating for the firmware. But what? And how do I fix this?

Hello all,
If you are experiencing problems setting up or using personal cloud, please double check that port forwarding is in place and shown as open if using a port checking utility. (80, 443 for remote web browser access, 50500-50599 for LSM/basic cloud functions) How do I set up my router for Personal Cloud?
At that point please contact LenovoEMC support to create a support incident and troubleshoot for your specific circumstance.
Lenovo Contact Information is region specific. Please click the correct link then access the Contact Us at
the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Similar Messages

Can't configure Airport Express after firmware upgrade 6.2.

I have an Airport Extreme (V5.6) and I recently upgraded my Aiport Express to firmware 6.2. I was using the Express to extend my range and attach to my stereo for iTunes. I went out of town and took the Airport Express with me to use in my hotel rooms. Everything was fine. When I returned and I re-attached the Airport Express to the system at home, it said there was a firmware upgrade, so I went ahead and did the upgrade. Since that time, iTunes has not been able to recognize the Express. It tries, but cannot find it. I then tried to reconfigure the Aiport Express but i get an error message "An error occurred while attempting to communicate with the AirPort Express. (-8)". Does anybody have a solution. I'm afraid to update the Base Station firmware for fear that I might run into the same problem. I'm running an aluminum Powerbook G4(1.25 ghz).

Hi,
I don't really know the solution, but the Airport Express firmware is now at 6.3. Maybe you should use this latest one to see what's happen...

I can not download creative cloud after I purchased

How can I download creative cloud after I purchased? i am not given the option in 'manage my account"

Hi M Goode,
Please refer to the help document below to download and install the Adobe creative Cloud:
Creative Cloud Help | Download, install, update, or uninstall apps
Regards,
Sheena

I can't configure elan touchpad after service

Hi!
My laptop is G580, i7. OS: Windows 8.1.
After service (touchpad change), I can't configure the new one. I tried with different drivers - installing and uninstalling - nothing has change. "Options" in "ELAN" tab doesn't work.... When I start programs in Elantech folder, I change the settings, but it doesn't affect touchpad. Please, help!
Link to image 1
Link to image 2
Link to image 3
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums
Solved!
Go to Solution.

1) Uninstall the ELAN Touchpad driver from the Control Panel
2) Reboot your system
3) Install this driver
http://support.lenovo.com/de/de/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g500s-n...
4) Test the options

How can i install creative cloud after computer reset

I had the redemption code from my employer, used it, was working fine - no dramas. After factory reset of computer can not download creative cloud. Can anybody help?

http://www.adobe.com/products/creativecloud/faq.html
http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
What it is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
-Install, update or UNinstall, and launch after installing

Can't configure EPM modules after ODI 11.1.1.6 install

So recently ran the EPM 11.1.2.1 install on my windows server r2 x86. I have configured foundation. Then i proceeded to install ODI 11.1.1.6. ODI installed successfully and runs. Although now I can't configure essbase with shared services. Anyone know how to fix this. I followed some guides and I can't figure out whats going wrong.
DjSmeadly

[2012-03-17T13:49:21.256-07:00] [EPMCFG] [WARNING] [EPMCFG-01013] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse Relation Storage Configuration task priority: priority = null
[2012-03-17T13:49:21.257-07:00] [EPMCFG] [WARNING] [EPMCFG-01012] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse App Server Deployment task priority: priority = null
[2012-03-17T13:49:21.335-07:00] [EPMCFG] [WARNING] [EPMCFG-01013] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse Relation Storage Configuration task priority: priority = null
[2012-03-17T13:49:21.335-07:00] [EPMCFG] [WARNING] [EPMCFG-01012] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse App Server Deployment task priority: priority = null
[2012-03-17T13:49:21.407-07:00] [EPMCFG] [WARNING] [EPMCFG-01011] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse Hub Registration task priority: priority = null
[2012-03-17T13:49:21.470-07:00] [EPMCFG] [WARNING] [EPMCFG-01011] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse Hub Registration task priority: priority = null
[2012-03-17T13:49:21.627-07:00] [EPMCFG] [WARNING] [EPMCFG-01011] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse Hub Registration task priority: priority = null
[2012-03-17T13:49:21.682-07:00] [EPMCFG] [WARNING] [EPMCFG-01011] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse Hub Registration task priority: priority = null
[2012-03-17T13:49:21.832-07:00] [EPMCFG] [WARNING] [EPMCFG-01013] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse Relation Storage Configuration task priority: priority = null
[2012-03-17T13:49:21.832-07:00] [EPMCFG] [WARNING] [EPMCFG-01012] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse App Server Deployment task priority: priority = null
[2012-03-17T13:49:21.855-07:00] [EPMCFG] [WARNING] [EPMCFG-01013] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse Relation Storage Configuration task priority: priority = null
[2012-03-17T13:49:21.855-07:00] [EPMCFG] [WARNING] [EPMCFG-01012] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse App Server Deployment task priority: priority = null
[2012-03-17T13:49:21.917-07:00] [EPMCFG] [WARNING] [EPMCFG-01013] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse Relation Storage Configuration task priority: priority = null
[2012-03-17T13:49:21.917-07:00] [EPMCFG] [WARNING] [EPMCFG-01012] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse App Server Deployment task priority: priority = null
[2012-03-17T13:49:21.938-07:00] [EPMCFG] [WARNING] [EPMCFG-01013] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse Relation Storage Configuration task priority: priority = null
[2012-03-17T13:49:21.940-07:00] [EPMCFG] [WARNING] [EPMCFG-01012] [oracle.EPMCFG] [tid: 20] [ecid: 0000JOYQuga9TcIqyoedMG1FPFXl000003,0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Failed to parse App Server Deployment task priority: priority = null
this is what i found in the configtool.log

How can I configure Snow ABS after updating firmware to 5.7?

I have a 3 Mac network (G5 w/Tiger,vers A iMac and Wallstreet PB w/ Panther) connected by Snow ABS extreme that's been running perfectly for a couple of years. I updated the firmware on the ABS to 5.7 in efforts to have a configuration my Treo 650 with Enfora WiFi adaptor could join (it's 802.11b only and Enfora suggested updating the firmware and selecting b/g option). After the firmware update, Airport Admin Utility doesn't see the ABS unless I connect it to the G5 running AAU by ethernet (don't know if it's a crossover but I read on the forum it now doesn't matter). Trouble is when I then give my password, try to configure I get "The Airport Admin Utility was unable to read the configuration on the selected base station...an error occured while reading the configuation". I've tried updating the FW again, soft and hard resets, made sure I have the latest AirPort (4.2.1)and nothing helps. I pulled out my original snow ABS (not extreme) and my DSL and whole network function like before. I like the extreme since I can use my Airport Express to print for everybody and it then completes my coverage much better. Any help would be greatly appreciated.
LittleJohn
G5 Mac OS X (10.4.6) iMac vers A, Wallstreet PB (both 10,3,9)

There is no reason to be running beta software, I doubt it will even still run as iOS 6 has been officially released. Or were you simply trying to be funny?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

SA520W Configuration Access Issues After Firmware Update

The problem I'm having is a minor one, but a problem nonetheless. I'm new to this company and took over from the previous IT guy who was let go so he's the one who set all this up. We are using a Cisco 1841 which was provided by our ISP, and it is plugged in to the WAN port on the SA520W. The SA520W has the static Wan connection info and it is what makes the connection. Initially, we were able to access the SA520W configuration page with either it's default gateway 192.168.5.1 or with the IP 204.101.24.67, which is the static IP in the Optional WAN Port settings of the SA520W. After upgrading our SA520W from 1.1.42 to 1.1.65, I am no longer able to access the router using 204.101.24.67. I can only get in using the default gateway (192.168.5.1). The Optional WAN port is not in use and never has been which confuses me - I took screenshots of all the settings before the upgrade and nothing has changed at all. I guess I'm confused as to how I was initially able to access the router using 204.101.24.67, and why it stopped working after the firmware upgrade. Does anyone have any suggestions?

I re-read your original Post; are you not using the WAN port also? Did you try and remote in from a switch attached directly to the WAN/Optional WAN port? I am asking as I have almost the exact same setup using an 1811 which is NATing the SA. I could not reach it as the one-to-one NAT on the 1811 was not set correctly. I also went through the firmware upgrade and experience the same issues you are. I had the CISCO account with WAN access, and the upgrade removed that (after a lot of scratching). However, my real problem was also the routing on the 1811. I eventually had to get the guys to do a one-one NAT and remove all ACL and rules, but that does not mean it can't be done with it either. Try reaching it with a switch or cable and see what happens.

Can't open Email Settings after firmware updated a...

Hi,
I've upgrated my E71 with new 3.00 firmware yesterday and then restored phone memory from saved backup (yes, restoring is still a great pain for Nokia phones owners - you know, not all the software installed restores and so on, but that's another question).
Before this upgrade I had MfE and Nokia Email installed and one IMAP mailbox was set up in standard Messaging application. After restoring from backup Nokia Email was missing (backup problems I mentioned above) but I've reinstalled it successfully. MfE and Messaging mailbox also worked okay.
But today suddenly I discovered that when I try to open Settings / Email menu item at Messaging app, this app crashes silently. Strange, but when I'm accessing Email Settings menu item being at mailbox tab, I can see this mailbox settings. but when I try to enter global email settings for all mailboxes from the app main menu, application crashes.
I tried to add another mailbox using Settings Wizard - and it worked, additional mailbox appeared in Messaging app. But all the same with it - no access to global Settings / Email menu but works okay when I open Email Settings directly from mailbox tab.
The thing is that I need to remove mailboxes from Messaging App and it can be done through this unreachable global Settings / Email menu only.
Another detail - when I change storage from phone memory to memory card in Settings / Other menu, my mailboxes disappear and the Settings / Email menu becomes accessible. And when I change storage back to phone memory, my two mailboxes are back again (and functional, as before), but when I try to open Settings / Email menu app crashes.
Please advise, because I really have no idea what to do. I assume that there must be a way to remove mailboxes manually, but what is it?
Regards, Yuriy.

Well, the problem gone after I deleted MfE profile (I don't need it right now). This Settings menu is accessible again. Anyway, it was very strange and I can't predict if I will face it again after I add another MfE profile.

Can't connect to WRT54G after firmware update

I just tried to update the firmware on my WRT54G (version 8.0) and have not been able to connect to the router since then. The firmware said that it had been updated successfully, however I have been unable to connect since it reset itself, and the Ethernet and Internet LEDs are all constantly on even though nothing is connected (the power light on the other hand is behaving normally, not blinking or anything). I have tried resetting the router by holding down the reset button for 30 seconds, but this does not change anything, the router still cannot even be pinged. If anyone can give me any help at all with this, it will be very much appriciated. Thanks.

It sounds like the router might already be dead. But there is always hope that you might be able to revive it.
You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.

How can I deactivate Creative Cloud after windows crashed?

Good morning everyone,
Ive following issue that my Second PC crashed and Windows restored itself. Unfortunately it deleted half of the creative cloud programms. My issue is now that i cant reeinstall Photoshop and Aftereffects because it always says that all license are already in use. So is there any way to delet ore log myself off a license without the program beeing installed anymore.
I would be realy thankfull for any help.
Cheers
Forster F

Hi Forster,
Welcome to Adobe Forum,
The CC has been activated twice, so please perform the steps as mentioned earlier, when you will launch & try to sign in after install, it will ask you to deactivate from previous machine.
There will be an option to deactivate it from there also, if your previous machine are un accessible then you can choose the option to deactivate from here & henceforth it will allow to sign in & activate.
Please let us know if it worked.
Regards,
Rajshree

Can't configure Reporting Services after installation

Environment: SQL Server 2008 R2 Reporting Services Enterprise on Windows Server 2008 R2 Enterprise
Reporting services was installed for me by admins with "install but don't configure" option. My domain account is a member of local administrators group, but when I open Reporting Services configuration manager, I can't go to any of the tabs
other than the Service Account one. The Web Service URL and Database tabs are grayed out and inaccessible.
Any ideas?
thx!
-Peter

Hello,
In addition to above: make sure that Exchange 2013 is installed correctly. Check Exchange installation logs and run the Get-ExchangeServer command using Exchange Management Shell on the new server. You should see both Exchange 2010 and Exchange 2013 servers.
Hope it helps,
Adam
CodeTwo: Software solutions for Exchange and Office 365
If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others find the answer faster.

Can't connect to Airport after firmware update

Ever since I updated the firmware on my Airport I can't connect to it any more. I'm pretty sure I installed everything properly and reset the Airport several times but still no luck in connecting to it. Any suggestions?

DomPoggi wrote:The Airport Utility said firmware on each Airport Express needs to be updated, so I did it.
Dom
Firmware updates on the Express sometimes results in scrumbled settings.
Check that WiFi is disabled on your MacBook.
Then connect (preferabely with a LAN-Cable) the MacBook to the Express.
Open Airport Utility on the Mac and switch to the Express.
Use the wizzard to set up the Express from scratch or use manual setting zu check the settings.
Lupunus

Can't connect to internet after firmware update?

well last night i did a firmware update and now i can't connect to my network at home. i have a server running dhcp. so i gave the extreme a static ip in the range. dns and router ip are set to the servers ip. this all was working fine till last night. what am i doing wrong? i can't even log onto the server from my MBP. the APE is connected directly by ethernet to the server.
thanks

HI and welcome......
On your iPad...
Tap Settings / General / Reset / Reset Network Settings.
That resets to factory default. You may be prompted for your network password.
Hope that helps...
Carolyn

Can't join creative cloud after trial is over. URGENT

My trial time is over and I need to join creative cloud. I chose my payment option and then the website asks me for my. Then, as I follow the instructions, I can't find it. I need to join creative cloud ASAP!

Hi carila23456789,
Please try and use a different browser and try to place the order from Creative Cloud pricing and membership plans | Adobe Creative Cloud
You can also call our sales at 1800-585-0774.
^Ani

Can't configure personal cloud after firmware uppdate

Similar Messages

Maybe you are looking for