Can't configure SPML connector IDM 8.1

Hello
I try to configure SPML connector in IDM 8.1 (Solaris 10 x64, Java Web Server 7.0). When I try to add "New Resource", I choose "LOCAL", when I fill name,password, URL and add ObjectClassMapping, I add two rows ACCOUNT and GROUP. After "Next", I get "nullPointer Exception". I don't understand, what I do wrong.

Have you solved the problem?
What kind of data you have insert into this field:
# objectClassNames
# spmlClassNames
# targetNames
# IDMAttribute
BTW i try to connect 2 idm 8.1 using the connector 1.0.4828
http://wikis.sun.com/display/IdentityConnectors/SPMLv2+Connector
thanks in advance
Alberto

Similar Messages

Can't configure Apache connector

I've tried this on Fedora Core 9 with no success and now I'm
trying it on FC8 with the same error. After installing CF and
configuring it to work with Apache, I go to start it and I get
quote:
[root@ns1 ~]# /opt/coldfusion8/bin/coldfusion start
Starting ColdFusion 8...
The ColdFusion 8 server is starting up and will be available
shortly.
======================================================================
Running the ColdFusion 8 connector wizard
======================================================================
Configuring the web server connector (Launched on the first
run of the ColdFusion 8 start script)
Running apache connector wizard...
=======================================
There was an error while running the connector wizard
Connector installation was not successful
=======================================
======================================================================
ColdFusion 8 has been started.
ColdFusion 8 will write logs to
/opt/coldfusion8/logs/cfserver.log
======================================================================
I changed the paths in the 'apache-connector.sh' file, but I
still can't get it to work. Any ideas?

Ok, this is from this morning when trying:
07/25 09:05:39 info Macromedia JRun 4.0 (Build 108487)
07/25 09:05:40 debug Found JRun server coldfusion at
127.0.0.1:2930
07/25 09:05:40 debug Deleted directory
/opt/coldfusion8/runtime/lib/wsconfig/1/.libs
07/25 09:05:40 debug Deleted directory
/opt/coldfusion8/runtime/lib/wsconfig/1
07/25 09:05:40 info Fedora release 9 (Sulphur)
07/25 09:05:40 debug Using Apache binary /usr/sbin/httpd
07/25 09:05:40 info Server's Module Magic Number:
20051115:11. Supported major magic numbers on this platform are
20020628 and 20020903.
07/25 09:05:40 info Attempting to build connector from
sources
07/25 09:05:40 info Server version: Apache/2.2.8 (Unix)
07/25 09:05:40 debug Using Apache control script
/usr/sbin/httpd
07/25 09:05:40 debug Parsing Apache configuration file
/etc/httpd/conf/httpd.conf
07/25 09:05:40 debug Exec'ing chmod 777
/opt/coldfusion8/runtime/lib/wsconfig/1
07/25 09:05:40 debug Set permission to 777 on
/opt/coldfusion8/runtime/lib/wsconfig/1
07/25 09:05:40 debug Exec'ing chmod +x
/opt/coldfusion8/runtime/lib/wsconfig/1/build_jrun22
07/25 09:05:40 debug Set permission to execute on
/opt/coldfusion8/runtime/lib/wsconfig/1/build_jrun22
07/25 09:05:40 debug Exec'ing
/opt/coldfusion8/runtime/lib/wsconfig/1/build_jrun22
07/25 09:05:41 error Error running
"/opt/coldfusion8/runtime/lib/wsconfig/1/build_jrun22": exit code
was 1
07/25 09:05:41 error Could not build Apache2 web server
connector from source. Use build script /opt/coldfusion8/
runtime/lib/wsconfig/1/build_jrun22.
jrunx.connectorinstaller.ConnectorInstallerException: Could
not build Apache2 web server connector from source. U
se build script
/opt/coldfusion8/runtime/lib/wsconfig/1/build_jrun22.
at
jrunx.connectorinstaller.ApacheInstaller.buildModuleFromSource(ApacheInstaller.java:1234)
at
jrunx.connectorinstaller.ApacheInstaller.copyFiles(ApacheInstaller.java:1126)
at
jrunx.connectorinstaller.ApacheInstaller.installConnector(ApacheInstaller.java:223)
at
jrunx.connectorinstaller.ConnectorInstaller.installConnector(ConnectorInstaller.java:337)
at
jrunx.connectorinstaller.ConnectorInstaller.doIt(ConnectorInstaller.java:271)
at
jrunx.connectorinstaller.ConnectorInstaller.main(ConnectorInstaller.java:759)

Integrating SOA and Peoplesoft: Configuring JMSTARGET Connector in IB.

Hi All,
I have created JMS queue/topic in oracle application server. Can anybody idea how can we configure JMS connector of peoplesoft integration broker.
Let me first explain my requirement, I am working in peoplesoft outbound interface design with SOA integration.
So my approach will be creating JMS queue in oracle application Server and then configuring this JMS to any node of peoplesoft IB.
Then extracted information from peoplesoft need to send to the above node so that once the node receive the message it should
populate the JMS queue inturn SOA BPEL will be triggered to write into third party file/database.
Please give your inputs on this approach if you any other suggetion for peoples soft outbound integration with SOA.
Thanks inadvance.

Its published, but somehow you are unable to see it..issues with Meatlink for sure..
Here is its content :
Applies to:
PeopleSoft Enterprise PT PeopleTools - Version: 8.4 - Release: 8.4
Information in this document applies to any platform.
This document was previously published as Customer Connection Solution 201077819
Symptoms
Please see below.
Cause
Not Applicable
Solution
<<Document:664816.1>> E-IB: Configuring Integration Broker with IBM MQ on AIX
SPECIFIC TO: Enterprise, PeopleTools, Integration Broker Release 8.49
ISSUE:
How to setup Integration Broker to PUT messages to an IBM MQ Server on a remote machine?
SOLUTION:
<See attachment for documentation with screenshot examples.>
Configuring Integration Broker with IBM MQ on AIX
The following guide is intended to outline the setup between Peoplesoft Integration Broker and IBMs Websphere MQ version 6 client on AIX. Note: This is not a certification, but a working example, specifically using the MQ client to connect to a remote machine running the MQ server.
Platform Information:
PeopleSoft PeopleTools 8.49
IBM Websphere MQ Release 6
AIX
Steps
1) Install and IBM Websphere MQ (WMQ) client
2) Configure WMQ connection
3) Configure Peoplesoft
4) TEST using PING and a Peoplesoft message to PUT data onto the WMQ server
Steps
1) Install and configure Websphere MQ client on AIX where Peoplesoft is located
NOTE: This is one optional architecture. It is also possible to install Peoplesoft and MQ on the same server, which avoids the client software altogether.
a. IBM deliveres an MQ client that is installed on the same box as the Peoplesoft with the following options.
i. Installed to /usr/mqm, all objects owned by local user mqm
ii. Ensure that the MQ Extended Transactional Client is installed
1. This includes com.ibm.mqetclient.jar file
iii. Mq specific environment variables
1. $MQ_JAVA_DATA_PATH=/usr/mqm
2. $MQ_JAVA_INSTALL_PATH=/usr/mqm/java
3. $MQ_JAVA_LIB_PATH=/usr/mqm/java/lib
4. jms.jar, fscontext.jar, jndi.jar, providerutil.jar, stcjms.jar
iv. CLASSPATH
1. Includes the following MQ jar files
i. com.ibm.mqetclient.jar
ii. providerutil.jar
iii. com.ibm.mqjms.jar
iv. ldap.jar
v. jta.jar
vi. jndi.jar
vii. jms.jar
viii. connector.jar
ix. com.ibm.mq.jar
2. Example
a. > echo $CLASSPATH
i. echo $CLASSPATH /usr/mqm/java/lib/com.ibm.mqetclient.jar:/usr/mqm/java/lib/providerutil.jar:/usr/mqm/java/lib/com.ibm.mqjms.jar:/usr/mqm/java/lib/ldap.jar:/usr/mqm/java/lib/jta.jar:/usr/mqm/java/lib/jndi.jar:/usr/mqm/java/lib/jms.jar:/usr/mqm/java/lib/connector.jar:/usr/mqm/java/lib/fscontext.jar:/usr/mqm/java/lib/com.ibm.mq.jar:/usr/mqm/java/lib:/usr/mqm/java/bin
3. When setting up Peoplesoft, add these jar files to the classpath setting in the setenv.sh file and reboot PIA
2) Configure WMQ
a. Edit JMSAdmin.config (located in /usr/mqm/java/bin)
ii. Set Initial Context Factory = com.sun.jndi.fscontext.RefFSContextFactory
# The following line specifies which JNDI service provider is in use.
# It currently indicates an LDAP service provider. If a different
# service provider is used, this line should be commented out and the
# appropriate one should be uncommented.
#INITIAL_CONTEXT_FACTORY=com.sun.jndi.ldap.LdapCtxFactory
INITIAL_CONTEXT_FACTORY=com.sun.jndi.fscontext.RefFSContextFactory
#INITIAL_CONTEXT_FACTORY=com.ibm.ejs.ns.jndi.CNInitialContextFactory
iii. Set PROVIDER_URL=file:/usr/mqm/java
# The following line specifies the URL of the service provider's initial context. It currently refers to an LDAP root context. Examples of a file system URL and WebSphere's JNDI namespace are also shown, commented out.
#PROVIDER_URL=ldap://polaris/o=ibm,c=us
PROVIDER_URL=file:/usr/mqm/java
#PROVIDER_URL=iiop://localhost/
b. Run JMSAdmin to setup queue and qcf to the MQ server
i. def qcf(PLAS160_QCF) HOSTNAME(GSPLVP006-VM2) PORT(1414) CHANNEL(SYSTEM.DEF.SVRCONN) QMANAGER(QM_gsplvp006_vm2) TRANSPORT(CLIENT)
ii. NOTE: When connecting from a client to a remote server, it is important to specify the hostname, port and transport along with the other values.
iii. def q(PLAS160_Q) queue(PLAS160_Q)
1. Note: The q is a local naming alias, whereas the queue is the physical queue name on the MQ server
iv. Screenshot:
v. This creates a .bindings file
vi. NOTE: It is also possible to use IVTSetup for this, but JMSAdmin is recommended.
vii. NOTE: It is possible to gain a .bindings file from your MQ server administrator. Be sure that this format is correct, and the location on the client is referenced correctly.
viii. JMSAdmin can also be used to determin what connections are available from this machine using command dis ctx as shown
b. Optional: Test the connection to the MQ server using IBM software.
NOTE: Testing the ivtQ and ivt QCF can be accomplished using the IVTRun program, provided that the ivtQ and ivtQCF have been setup in the .bindings file with the same available on the MQ server (some mq administrators do not enable this by default)
i. Example IVTRun, see Appendix 1
ii. Example .bindings file see Appendix 2
3) Configure PeopleSoft
a. Create an external NODE representing the target JMS queue
i. Example node, see appendix 3
b. Setup the connectors properties for the new node
i. Use the connector ID= JMSTARGET
ii. Example properties screenshot, see Appendix 4
1. Notes
a. JMSProvider is MQSeries
b. JMSFactory, JMSQueue are those specified in the .bindings file representing that on the JMS server. In this case, PLAS160_QCF and PLAS160_Q are used for this example.
c. JMSUrl is the location of the working .bindings file on the web server (in this case file:/D:/apps/IBM/WebSphereMQ/Java )
c. Setup Gateway Properties
i. Access the Gateway Properties using PIA and add the JMS information for MQSeries to the integrationgateway.properties file as shown:
## JMS configuration Section
# <the following line is required>
ig.jms.JMSProvider.JNDIFactory.MQSeries=com.sun.jndi.fscontext.RefFSContextFactory
ii. Queue information here is only needed if going to GET message using the JMSListeningConnector. Not needed for the target PUT (or ping)
iii. Example integrationgateway.properties, See appendix 5
4) Test PUT connection from Peoplesoft to WMQ
1. Ping the JMS node from the node definition
b. Setup routings to PUT messages to the MQ node
i. Example using USER_PROFILE
ii. Submit the message and check the Operations Monitor
iii. Verify that the message made it to MQ (this is viewed by browsing the queue on the Websphere MQ Explorer, message browser. A better utility is rfhutil which is included in the MQ windows client development kit)
NOTE: This document is intended for 1 way communication TO Mq from Peoplesoft. Setup for GET using the JMSListeningConnector is a separate topic for documentation.
Appendix 1 IVTRun
Appendix 2 .bindings file.
NOTE: The PLAS160_QCF and PLAS160_Q references are applicable to this example.
#This file is used by the JNDI FSContext.
#Wed Sep 17 11:43:13 PDT 2008
PLAS160_QCF/RefAddr/9/Type=SRC
PLAS160_Q/RefAddr/5/Encoding=String
PLAS160_QCF/RefAddr/13/Content=5000
PLAS160_QCF/RefAddr/3/Content=GSPLVP006-VM2
PLAS160_Q/RefAddr/8/Content=PLAS160_Q
PLAS160_QCF/RefAddr/13/Type=PINT
PLAS160_QCF/RefAddr/1/Type=TRAN
MYPUT/RefAddr/2/Content=-2
PLAS160_QCF/RefAddr/6/Encoding=String
PLAS160_QCF/RefAddr/17/Type=RINT
PLAS160_QCF/RefAddr/5/Type=CHAN
PLAS160_QCF/RefAddr/18/Encoding=String
PLAS160_Q/RefAddr/2/Content=-2
PLAS160_PUT/RefAddr/1/Encoding=String
PLAS160_QCF/RefAddr/20/Content=SYSTEM.DEFAULT.MODEL.QUEUE
PLAS160_PUT/RefAddr/3/Type=PER
MYPUT/RefAddr/6/Encoding=String
PLAS160_Q/RefAddr/5/Content=0
PLAS160_PUT/RefAddr/8/Content=PLAS160_PUT
PLAS160_Q/RefAddr/6/Encoding=String
MYPUT/RefAddr/0/Type=VER
PLAS160_PUT/RefAddr/7/Type=FIQ
PLAS160_QCF/RefAddr/7/Encoding=String
MYPUT/RefAddr/4/Type=CCS
PLAS160_PUT/RefAddr/2/Content=-2
PLAS160_QCF/RefAddr/19/Encoding=String
PLAS160_PUT/RefAddr/5/Content=0
PLAS160_PUT/RefAddr/2/Encoding=String
PLAS160_Q/RefAddr/3/Type=PER
MYPUT/RefAddr/8/Type=QU
MYPUT/RefAddr/7/Encoding=String
PLAS160_Q/RefAddr/7/Encoding=String
MYPUT/ClassName=com.ibm.mq.jms.MQQueue
PLAS160_Q/RefAddr/7/Type=FIQ
PLAS160_QCF/RefAddr/8/Encoding=String
PLAS160_QCF/RefAddr/6/Type=CCS
MYPUT/RefAddr/9/Content=
PLAS160_QCF/RefAddr/10/Type=SFIPS
PLAS160_QCF/RefAddr/10/Encoding=String
PLAS160_PUT/RefAddr/3/Encoding=String
PLAS160_QCF/RefAddr/20/Type=TM
MYPUT/RefAddr/8/Encoding=String
PLAS160_Q/RefAddr/8/Encoding=String
PLAS160_QCF/RefAddr/14/Type=MBS
PLAS160_QCF/RefAddr/17/Content=5000
PLAS160_QCF/RefAddr/2/Type=QMGR
PLAS160_PUT/FactoryName=com.ibm.mq.jms.MQQueueFactory
PLAS160_QCF/RefAddr/7/Content=\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000
MYPUT/FactoryName=com.ibm.mq.jms.MQQueueFactory
MYPUT/RefAddr/3/Content=-2
PLAS160_PUT/RefAddr/0/Type=VER
MYPUT/RefAddr/6/Content=273
PLAS160_QCF/RefAddr/18/Type=TCM
PLAS160_QCF/RefAddr/9/Encoding=String
PLAS160_QCF/RefAddr/11/Content=false
PLAS160_QCF/RefAddr/1/Content=1
PLAS160_Q/RefAddr/6/Content=273
PLAS160_QCF/RefAddr/11/Encoding=String
PLAS160_QCF/RefAddr/20/Encoding=String
PLAS160_PUT/RefAddr/4/Type=CCS
PLAS160_PUT/RefAddr/4/Encoding=String
PLAS160_QCF/RefAddr/14/Content=10
PLAS160_QCF/RefAddr/4/Content=1414
PLAS160_Q/RefAddr/9/Content=
MYPUT/RefAddr/9/Encoding=String
MYPUT/RefAddr/0/Content=6
MYPUT/RefAddr/1/Type=EXP
PLAS160_Q/RefAddr/9/Encoding=String
PLAS160_PUT/RefAddr/8/Type=QU
PLAS160_Q/RefAddr/0/Content=6
PLAS160_Q/RefAddr/0/Type=VER
MYPUT/RefAddr/5/Type=TC
PLAS160_Q/RefAddr/3/Content=-2
PLAS160_QCF/RefAddr/0/Encoding=String
PLAS160_PUT/RefAddr/6/Content=273
PLAS160_QCF/RefAddr/21/Content=
PLAS160_Q/RefAddr/4/Type=CCS
MYPUT/RefAddr/9/Type=QMGR
PLAS160_QCF/RefAddr/21/Encoding=String
PLAS160_PUT/RefAddr/9/Content=
PLAS160_QCF/RefAddr/12/Encoding=String
PLAS160_PUT/RefAddr/5/Encoding=String
MYPUT/RefAddr/0/Encoding=String
PLAS160_Q/RefAddr/8/Type=QU
PLAS160_Q/RefAddr/0/Encoding=String
PLAS160_PUT/RefAddr/0/Content=6
PLAS160_Q/FactoryName=com.ibm.mq.jms.MQQueueFactory
PLAS160_PUT/RefAddr/3/Content=-2
PLAS160_QCF/RefAddr/7/Type=CT
PLAS160_QCF/RefAddr/1/Encoding=String
PLAS160_QCF/RefAddr/11/Type=SPAG
PLAS160_QCF/RefAddr/21/Type=TQPFX
PLAS160_QCF/RefAddr/13/Encoding=String
PLAS160_QCF/RefAddr/22/Encoding=String
PLAS160_PUT/RefAddr/6/Encoding=String
PLAS160_QCF/RefAddr/15/Type=FIQ
PLAS160_QCF/RefAddr/3/Type=HOST
MYPUT/RefAddr/1/Encoding=String
PLAS160_PUT/RefAddr/1/Type=EXP
PLAS160_QCF/RefAddr/19/Type=MNST
PLAS160_QCF/RefAddr/2/Encoding=String
PLAS160_PUT/RefAddr/5/Type=TC
PLAS160_QCF/FactoryName=com.ibm.mq.jms.MQQueueConnectionFactoryFactory
PLAS160_QCF/RefAddr/14/Encoding=String
PLAS160_QCF/RefAddr/18/Content=true
MYPUT/RefAddr/2/Type=PRI
PLAS160_QCF/RefAddr/8/Content=0
MYPUT/RefAddr/4/Content=1208
MYPUT/RefAddr/2/Encoding=String
PLAS160_PUT/RefAddr/9/Type=QMGR
PLAS160_Q/ClassName=com.ibm.mq.jms.MQQueue
PLAS160_Q/RefAddr/1/Encoding=String
MYPUT/RefAddr/7/Content=1
PLAS160_Q/RefAddr/1/Type=EXP
MYPUT/RefAddr/6/Type=ENC
PLAS160_QCF/RefAddr/12/Content=true
PLAS160_QCF/RefAddr/2/Content=QM_gsplvp006_vm2
PLAS160_Q/RefAddr/7/Content=1
PLAS160_QCF/RefAddr/3/Encoding=String
PLAS160_Q/RefAddr/5/Type=TC
PLAS160_QCF/RefAddr/15/Content=1
PLAS160_QCF/RefAddr/5/Content=SYSTEM.DEF.SVRCONN
MYPUT/RefAddr/1/Content=-2
PLAS160_PUT/RefAddr/7/Encoding=String
PLAS160_QCF/RefAddr/15/Encoding=String
PLAS160_Q/RefAddr/9/Type=QMGR
MYPUT/RefAddr/3/Encoding=String
PLAS160_Q/RefAddr/1/Content=-2
PLAS160_Q/RefAddr/2/Encoding=String
PLAS160_Q/RefAddr/4/Content=1208
PLAS160_QCF/RefAddr/8/Type=CTO
PLAS160_PUT/RefAddr/7/Content=1
PLAS160_QCF/RefAddr/22/Content=1
PLAS160_QCF/RefAddr/12/Type=UCP
PLAS160_QCF/RefAddr/0/Type=VER
PLAS160_QCF/RefAddr/4/Encoding=String
PLAS160_QCF/RefAddr/22/Type=MRET
PLAS160_QCF/RefAddr/16/Type=LA
PLAS160_PUT/ClassName=com.ibm.mq.jms.MQQueue
PLAS160_QCF/RefAddr/4/Type=PORT
PLAS160_PUT/RefAddr/8/Encoding=String
PLAS160_QCF/RefAddr/16/Encoding=String
PLAS160_PUT/RefAddr/1/Content=-2
PLAS160_PUT/RefAddr/4/Content=1208
PLAS160_Q/RefAddr/3/Encoding=String
PLAS160_PUT/RefAddr/2/Type=PRI
PLAS160_PUT/RefAddr/6/Type=ENC
PLAS160_QCF/RefAddr/5/Encoding=String
MYPUT/RefAddr/3/Type=PER
PLAS160_PUT/RefAddr/9/Encoding=String
PLAS160_QCF/RefAddr/17/Encoding=String
MYPUT/RefAddr/4/Encoding=String
PLAS160_Q/RefAddr/2/Type=PRI
MYPUT/RefAddr/7/Type=FIQ
PLAS160_Q/RefAddr/4/Encoding=String
PLAS160_QCF/ClassName=com.ibm.mq.jms.MQQueueConnectionFactory
PLAS160_QCF/RefAddr/16/Content=
PLAS160_Q/RefAddr/6/Type=ENC
PLAS160_QCF/RefAddr/6/Content=819
PLAS160_QCF/RefAddr/19/Content=true
PLAS160_QCF/RefAddr/9/Content=0
MYPUT/RefAddr/5/Content=0
PLAS160_PUT/RefAddr/0/Encoding=String
MYPUT/RefAddr/8/Content=PLAS160_PUT
PLAS160_QCF/RefAddr/10/Content=false
MYPUT/RefAddr/5/Encoding=String
PLAS160_QCF/RefAddr/0/Content=6
Appendix 3 Node definition
Appendix 4 - Node JMSTarget Connectors Properties
Appendix 5 integrationgateway.properties JMS configuration section
## JMS configuration Section
#The JNDIFactory Classnames for Weblogic, IPlanet, MQSeries.
#ig.jms.JMSProvider.JNDIFactory.Weblogic=weblogic.jndi.WLInitialContextFactory
#ig.jms.JMSProvider.JNDIFactory.IPlanet=com.sun.jndi.fscontext.RefFSContextFactory
ig.jms.JMSProvider.JNDIFactory.MQSeries=com.sun.jndi.fscontext.RefFSContextFactory
#ig.jms.JMSProvider.JNDIFactory.OracleApplicationServer=com.evermind.server.rmi.RMIInitialContextFactory
# Enter the number of Queue listners to instantiate
#ig.jms.Queues=1
# For each queue specify the following properties
# Name
# Provider
# JMSFactory name (which is binded to the JNDI)
# MessageSelector (optional Message Filter)
# JNDI System File URL
# JMS User
# JMS Password
# Example :
#ig.jms.Queue1=QUEUE_VAS
#ig.jms.Queue1.Provider=MQSeries
#ig.jms.Queue1.JMSFactory=QCF
# ig.jms.Queue1.MessageSelector=
#ig.jms.Queue1.Url=file:/D:/apps/IBM/WebSphereMQ/Java
# ig.jms.Queue1.User=sam
# Use the supplied encryption utility to provide an encrypted password for the entry below
# ig.jms.Queue1.Password=EncryptedPassword
# ig.jms.Queue1.SecurityPrincipal=sam
# Use the supplied encryption utility to provide an encrypted password for the entry below
# ig.jms.Queue1.SecurityCredentials=EncryptedPassword
#IBInfoHeaders
#ig.jms.Queue1.MessageName=QE_F18_ASYNC
#ig.jms.Queue1.MessageVersion=VERSION_1
#ig.jms.Queue1.RequestingNode=FromNode
#ig.jms.Queue1.DestinationNode=ToNode
# Use the supplied encryption utility to provide an encrypted password for the entry below
#ig.jms.Queue1.NodePassword=EncryptedRequestingNodePassword
#ig.jms.Queue1.SubChannel=SubChannel
# Enter the number of Topic Subscribers to instantiate
# ig.jms.Topics=1
# For each Topic specify the following properties
# Name
# Provider
# JMSFactory name (which is binded to the JNDI)
# MessageSelector (optional Message Filter)
# JNDI System File Url
# JMS User
# JMS Password
# Example :
# ig.jms.Topic1=ExampleTopic
# ig.jms.Topic1.Provider=MQSeries
# ig.jms.Topic1.JMSFactory=TopicConnectionFactory
# ig.jms.Topic1.MessageSelector=
# ig.jms.Topic1.Url=file:c:/
# ig.jms.Topic1.User=sam
# Use the supplied encryption utility to provide an encrypted password for the entry below
# ig.jms.Topic1.Password=EncryptedPassword
# ig.jms.Queue1.SecurityPrincipal=sam
# Use the supplied encryption utility to provide an encrypted password for the entry below
# ig.jms.Queue1.SecurityCredentials=EncryptedPassword
#IBInfo Headers
#ig.jms.Topic1.MessageName=QE_F18_ASYNC
#ig.jms.Topic1.MessageVersion=VERSION_1
#ig.jms.Topic1.RequestingNode=FromNode
#ig.jms.Topic1.DestinationNode=ToNode
# Use the supplied encryption utility to provide an encrypted password for the entry below
#ig.jms.Topic1.NodePassword=EncryptedRequestingNodePassword
#ig.jms.Topic1.SubChannel=SubChannel
#For sending error either ErrorQueue or ErrorTopic must be configured
#If both exists, errors are only sent to ErrorQueues.
#Configure the Error-Queue configuration
# ig.jms.ErrorQueue=ErrorQ
# ig.jms.ErrorQueue-Provider=Weblogic
# ig.jms.ErrorQueue-User=sam
# Use the supplied encryption utility to provide an encrypted password for the entry below
# ig.jms.ErrorQueue-Password=sam
# ig.jms.Queue1.SecurityPrincipal=sam
# Use the supplied encryption utility to provide an encrypted password for the entry below
# ig.jms.Queue1.SecurityCredentials=EncryptedPassword
# ig.jms.ErrorQueue-JMSFactory=TopicConnectionFactory
# ig.jms.ErrorQueue-Url=file:c:/
#Configure the Error-Topic configuration
# ig.jms.ErrorTopic=Error
# ig.jms.ErrorTopic-Provider=IPlanet
# ig.jms.ErrorTopic-User=sam
# Use the supplied encryption utility to provide an encrypted password for the entry below
# ig.jms.ErrorTopic-Password=sam
# ig.jms.ErrorTopic-JMSFactory=TopicConnectionFactory
# ig.jms.ErrorTopic-Url=file:c:/
## End of JMS configuration Section
# Profile Information
# Set it to either TRUE or FALSE
ig.ProfileInformation=FALSE
#End-Of Profile Information
##EIPTestTool Properties
#Class name of the Gateway Manager to use during processing
#ig.gatewayManagerClass=com.peoplesoft.pt.integrationgateway.eiptesttool.EIPTestToolGatewayManager
#Contains a true or false value.
#True for LoopBack
#ig.EIPLoopBack=TRUE
#Contains the directory path that will be used
#to store request/response files during recording.
#ig.EIPOutputDirectory=c:/temp/output
# Number of ig.EIPMsgProp.N.propFile's
#ig.EIPMsgProp.count=0
#Certification root directory
#ig.EIPInputDirectory=c:/temp/input
#MessageProperty file names with locations.
#ig.EIPMsgProp.1.propFile=c:/temp/input/properties/pro1.xml
#ig.EIPMsgProp.2.propFile=c:/temp/input/properties/pro2.xml
#Overrides input directory for an EIP
#ig.EIPMsgProp.1.inputDirectory=c:/temp/input/properties1/
#EIPNodemapFileName
#ig.EIPNodeMap=c:/temp/nodemap.xml
##End of EIPTestToolProperties
#File connector password.
# Use the supplied encryption utility to provide an encrypted password for the entry below
ig.fileconnector.password=EncryptedPassword
#End of file connector properties.
## Query Access Services (QAS) Configuration Section.
# QAS Repository Home Directory. This is the directory where Query result blocks will be
# temporarily persisted.
# Example:
#ig.qas.repositoryHomeDir=C:/QASRepository
# Uncomment the following line and replace the value with the actual QAS Repository Home Directory.
#ig.qas.repositoryHomeDir=<Full-Path-For-Directory>
## END of QAS Configuration.
## AS2 Connector Properties.
# These Properties need to be set to use either the AS2TargetConnector or the AS2ListeningConnector
# REQUIRED:
# AS2 KeyStore Properties
# Uncomment the following two lines to specify your key keystore path and password.
# Use the PSCipher.bat utility to encrypt the keystore password.
# example:
# ig.AS2.KeyStorePath=C://pt846//webserv//peoplesoft//keystore//pskey
# ig.AS2.KeyStorePassword=GD9klUFw8760HVaqeT4pkg==
# OPTIONAL:
# AS2 Log Directory, logs all incoming and outgoing AS2 requests and responses.
# Uncomment and specify the correct directory name to enable logging.
# example:
# ig.AS2.LogDirectory = c://temp//as2//logs
## End of AS2 Connector Properties
## AS2ListeningConnector Only Properties.
# OPTIONAL:
# AS2From and AS2To http header parameters are required on all incoming AS2 messages. These parameters must
# map to PeopleSoft node definitions either directly or indirectly via AS2 From & To map specifications.
# AS2 From & To Map
# This map translates incoming AS2From and AS2To http header parameters into PeopleSoft node names.
# This property is not required if your incoming messages use AS2From and AS2To parameters that match
# existing PeopleSoft node definitions.
# ig.AS2.AS2ListenerMap.From.<AS2From>= Specify the PSFT Source Node Name.
# ig.AS2.AS2ListenerMap.To.<AS2To>= Specify the PSFT Target Node Name.
# This example translate AS2From from AS2SENDER to PSFT_SRC_NODE, and AS2To from AS2RECEIVER to PSFT_TGT_NODE.
# example:
# ig.AS2.AS2ListenerMap.From.AS2SENDER=PSFT_SRC_NODE
# ig.AS2.AS2ListenerMap.To.AS2RECEIVER=PSFT_TGT_NODE
# AS2 Message name
# Message name used to publish AS2 transactions.
# Use this property if the incoming AS2 Message Name is not in the HTTP Header or the URL.
# Replace <source> and <target> with either the incoming AS2From and AS2To http header parameters .
# when those match existing PeopleSoft node definitions, or with the PeopleSoft nodes names specified in the
# AS2 From & To map above.
# ig.AS2.<source>.<target>.MessageName= Specify the Message Name
# example:
# ig.AS2.PSFT_SRC_NODE.PSFT_TGT_NODE.MessageName=AS2_ORDER_REQUEST
# These Properties need to be set to use either the AS2TargetConnector or the AS2ListeningConnector
# REQUIRED:
# AS2 Certificates
# CertificateAlias is the certificate of the AS2 Listening Node used to decrypt incoming messages.
# SignerCertificateAlias is the certificate of the AS2From trading partner of Listening Node used to verify
# the incoming signature.
# Replace <source> and <target> with either the incoming AS2From and AS2To http header parameters
# when those match existing PeopleSoft node definitions, or with the PeopleSoft nodes names specified in the
# AS2 From & To map above.
# ig.AS2.<source>.<target>.CertificateAlias = Specify the target AS2 Listening Node certificate alias.
# ig.AS2.<source>.<target>.SignerCertificateAlias = Specify the source AS2From trading partner certificate alias.
# example:
# ig.AS2.PSFT_SRC_NODE.PSFT_TGT_NODE.CertificateAlias=<GeneratedAS2certificatealias>
# ig.AS2.PSFT_SRC_NODE.PSFT_TGT_NODE.SignerCertificateAlias=<GeneratedAS2certificatealias>
## End of AS2ListeningConnector Only Properties
## AS2 Target Connector Properties
# These Properties need to be set to use the AS2TargetConnector
# AS2 Original Request Information Log Directory
# This is required for Async MDN only. The Async MDN receiver uses this directory
# to find original request information.
# example:
# ig.AS2.AS2Directory=c://temp//as2
## END of AS2 Target Connector Properties.
#XML dtd lookup flag
# true - enable dtd reference lookup dtd on gateway. this is also the default value.
# false - disable dtd reference lookup on gateway.
ig.dtdLookup=true
# Maximum active connections to be cached on gateway
# These are connections from gateway to peoplesoft application server
# Caching connections will improve integration broker throughput
ig.connection=10
#####################

Configuring SPML for Sun IDM 8.1

Hi,
this question has been posted several times on this Forum.
However, nobody has posted any replies to it.
I am trying to configure SPML on my IDM instance. (I am using IDM version 8.1)
Does anybody have an idea what values to insert for the ObjectClass--Attribute mapping?
*# objectClassNames*
*# spmlClassNames*
*# targetNames*
*# IDMAttribute*
Thanks

I'm not sure what you mean.
We've added this to the IDM Schema Configuration:
<IDMObjectClassConfiguration name='User' extends='Principal' description='User description'>
<IDMObjectClassAttributeConfiguration name='spml2ObjectClass' queryable='true' summary='true'/>
And then added our attributeDefinitions to SPML2.xml, in the <Object name='spml2-DSML-Target'> section.
Greetings,
Marijke

Configure send connector for exchange online protection

Hello Forum members,
I am trying to configure send and receive connectors for Exchange 2010 to route
on-premises mailboxes to Exchange OnLine Protection. The "help" info MS provides
is for Ex 2013 - and the EAC GUI and config does not lend a close fit to using the 2010
Exch Management Console. How can I configure connectors to properly connect to the Exchange Online Protection?
I have seen where the ip addresses are posted, etc. I am unclear how to configure the properties on the SBS 2011/EX 2010 server.
Any tips will help,
Thanks,
Eric H.
Network and Server Installs

Hello Wesleyhe,
You cannot use AD anything with EOP - if you mean exchange on-line protection.
you have to set a smart host on the SBS server to connect to EOP, you may need to add the EOP server ips to your network config
on the SBS server. the smart host line (for the send connector on SBS server) is something like: yourdomainname-com.mail.protection.outlook.com.
Then you need to configure the outside ip for your SBS server access in the EOP admin area.
Hope this helps.
eholz
Network and Server Installs

What are the steps to configure SAP Connector?

Hi Experts,
Please explain me how to configure SAP Connectors?
By how many ways we can configure SAP Connector?
Thanks & Regards,
Sharma.

Please search yourself before posting, ask specific questions only, do not post this question a third time.
Thread locked.
Thomas
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]

Can I use Web Connector(Proxy) by file extension?

Hi, All~
As you know, we can use proxy by ppath or extension in WebLogic
like below.
How can I configure NWS 4.1 obj.conf, so that web connector can
catch all jsp files for iAS6.
<Object name="si" ppath="*/servletimages/*">Service fn=wl-proxy
WebLogicHost=otherserver.com\ WebLogicPort=7008</Object>Service
method="(GET|HEAD|POST|PUT)" type=text/jsp fn=wl-proxy\
WebLogicHost=192.1.1.4 WebLogicPort=7001 PathPrepend=/jspfiles

There is no equivalent in iAS. A URL token must be used.
David
A??>Co wrote:
Hi, All~
As you know, we can use proxy by ppath or extension in WebLogic
like below.
How can I configure NWS 4.1 obj.conf, so that web connector can
catch all jsp files for iAS6.
<Object name="si" ppath="*/servletimages/*">Service fn=wl-proxy
WebLogicHost=otherserver.com\ WebLogicPort=7008</Object>Service
method="(GET|HEAD|POST|PUT)" type=text/jsp fn=wl-proxy\
WebLogicHost=192.1.1.4 WebLogicPort=7001 PathPrepend=/jspfiles

Configuring ACF2 connector with OIM 11gR2

Hi Experts,
I am working on configuring ACF2 connector with OIM 11gr2, In an intermediatory step we need to copy VOYAGER_ID.properties file. The comment against this file is written as: Rename VOYAGER_ID with the name "Voyager server's VOYAGER_ID control file property".
Can anybody please tell what does this actually mean?
thanks

Rename the copied file to match the VOYAGER_ID property. For example, if the target system has VOYAGER_ID = VOYAGE14, then the .properties file should be named VOYAGE14.properties.
The Voyager reconciliation agent sends a unique identifier value, called VOYAGER_ID, each time a reconciliation event occurs. This value must match the name of the .properties file being used by the topsecret-adv-agent-recon.jar file for reconciliation.

Configuring exchange connector in OIM 11gR2

Hi Experts,
I have to configure exchange connector with OIM 11gR2. I went through the connector guide and there they have mentioned about custom powershell script. Please let know from where I can get this script and the use of it. If any one is having sample script then please share it with me.
Regards,
Bhawna.

Connetcor version is 11.1.1.6.0
Also in doc it was mentioned to create a .bat file on OIM server to call this power shell script on connector server.

SPML Connector Question

Hi!
I try to connect my SPML-enabled application to SUM IDM. I use demo spml connector (ExampleSPML2ResourceAdapter, which is located at the REF folder)
Has anyone tried to use this adapter in real-life applications? I am getting various error messages in server.log while changing Java code. Adapter tries to issue listTargets request but fails on parsing URL..
Unfortunately, I am not experienced in Java. Any help
is appreciated
Thanks!

Did you ever find a way to provision a resource using SPML?
I'm facing the same problem at the moment..
Regards,
Tine

Can I configure an external drive to be password protected or do I need to buy an external hard drive already password enabled

I asked at a Hong Kong apple shop if they had password protected external drives. They didn't, I bought one anyway.
I'm wondering can I configure this drive. If yes, what do I need to do?

This looks like the easiest and most direct method and since it uses Disk Utility it would work on any OS.
http://osxdaily.com/2012/01/25/password-protect-external-drive-mac-encrypted-par tition/

HT4623 please help!! how can i configure my iphone 3gs because i've been updated a new version i did it but it's hard to activate it again.

please help!! how can i configure my iphone 3gs because i've been updated a new version, i did it but it's hard to activate it again. this message i always recieved in my iphone
"We're sorry, we are unable to continue with your activation at this time."

You phone was hacked. You can not get help with it here. Hacking / Jailbreaking voids any warraty and forfeits your right to support. Discussing jailbroken / hacked devices is forbidden by the terms of service here.

HT3382 With a MacbookAir (mid-2012) using a mini DisplayPort to VGA adapter plugged into the Thunderbolt port, can you configure the external monitor to FULLY display in portrait mode yet keep the built-in display in landscape mode?

With an 11"-inch Macbook Air (mid-2012) using a mini DisplayPort-to-VGA adapter plugged into the Thunderbolt port:
Can you configure an extended desktop with an external monitor (20") displaying full portrait mode (1200 x 1600 resolution) and keep the built-in display in landscape?
I'd like to see something like
External monitor / Built-in display

Yes, I can't see why not.
Just give it a try and report back if you have a problem.

How can I configure iCloud so it doesn't restore deleted or moved emails on my Mac?

I moved to iCloud, and so far it looks like everything is where it's supposed to be. My question is about syncing. When I delete an email on my Mac, iCloud restores it. How can I configure iCloud so that changes I make on my Mac and my iPhone stay changed?

On the Mac in System Preferences > iCloud
Make sure Mail & Notes is selected.
ON the iPhone tap Settings > iCloud
Make sure Mail is switched on.
And try restarting your Mac and iPhone.

How can I configure my new Mac Pro to output the timeline via HDMI

How can I configure my new Mac Pro to output the timeline in FCP 7 (yes, I have X, but I'm using 7 right now). I have two monitors running from TB2, but want to have the third for a client monitor.
If I use all three via TB2, it's literally three monitors, and I want to edit on my CineDisplay. I only want the client to see the timeline video on the third monitor. When I hook up HDMI I get no signal, in fact, I can't have the HDMI cable hooked up for TB2 to work with the third.
Thanks,
GEvans
DarthPro
3.7 QCIntelXeonE5
12 GB
AMD FirePro dual D300 2048MB
OSX 10.9.2

If you use all ThunderBolt displays, or stick with DisplayPort and Mini DisplayPort (free conversion between the two with only a cheap cable) you can have up to six displays.
If you attach "legacy" displays with "any-old adapter", you can have up to two, and the built-in HDMI counts as one if you use it.
Any more requires ACTIVE Adapters.
The US$100 Apple ACTIVE Mini DisplayPort to Dual-Link DVI adapter works in every case, even displays over 1920 wide.
StarTech and Accell make US$35 ACTIVE adpters that work for displays up to 1920 wide.

Can't configure SPML connector IDM 8.1

Similar Messages

Maybe you are looking for