Can't connect a HD to my AirPort Express

I have reformated the drive to Mac OS Extended (Journaled), and it is recognized by my Mac when connected directly in to an USB port. However, it doesn't appear when connected to the USB port on the back of the Airport Express.

it doesn't appear when connected to the USB port on the back of the Airport Express.
The AirPort Express will not support a hard drive at the USB port....it will only support a compatible printer.
The AirPort Extreme would be the router needed to work with a hard drive.

Similar Messages

After iTunes update, can't connect to remote speakers via Airport Express

I updated to iTunes 10.1.2.17 the other day, and ever since then, I can't connect to my stereo via my Airport Express. I get this message: "An error occurred while trying to connect to the remote speaker 'Airport Express'. The network connection failed."
My Airport Express firmware is up to date and I have not changed any settings since the iTunes update.
Anyone else have/had this problem? Any ideas?

I run Vista and I had the same problem after updating to the latest version of iTunes: Apple TV would indicate "Loading Library" for ever and nothing would happen. This had never happened before.
I tried different tricks like turning on/off home sharing on both iTunes and Apple TV (didn't work), unplugged/plugged Apple TV (didn't work), restore Apple TV (didn't work).
Eventually the solution was actually very simple: go to Firewall settings and make an exception for iTunes. I don't know why that was not necessary before the update, but it made the trick.

ITunes can't connect to remote speakers PLUS Airport Express p/word problem

I am running iTunes 7.4.1 and have previously been able to play iTunes through remote speakers via an Airport Express . After upgrading iTunes some time ago, I am unable to connect to the AE any more. The AE shows as an option in my iTunes window, but when I select it from the drop down option box bottom right, it just doesn't choose it.
I have read other discussions pertaining to this, and have followed all of those solutions, but to no avail.
I have done a hard reset on the AE restoring it's factory settings thinking I should just start again, and it has been renamed "Base Station Oa369f" so I know this has worked, but when I try to reconfigure it through Airport Utility, it asks for a password. I tried it's old password, and also tried the generic one "public" as stated in the AE setup guide, but it rejects both.
I am keen to figure this out as I'm about to buy a new printer and another AE so I can print wirelessly, but don't want to have the same issues if it's an AE bug that can't be fixed, I would be left with no printer!
I know this is two quite separate problems, but if anyone has any ideas for either I would be really grateful.
Thanks very much

I have exactly the same problem which has been driving me nuts for the last couple of days. However I am able to access the dropdown list of speakers. I have mine set to multiple speakers, and now it WILL play through my Airport Express again, but only when playing through the internal speakers at the same time. When I try to play solely through the Airport Express it just hangs.
Come on Apple, you need to be regression testing your upgrades far better than this, for something so basic to go wrong.

Can't connect imac to internet through Airport Express

Hello
I am trying to connect my new imac (2.4Ghz,OS X 10.5) to the internet through my Airport Express (v6.3) but have encountered some problems.
The set up goes like this:
Cable Internet <wired> TP-LINK Router <wired> AE <wireless> imac
The internet is coming from my landlord on the bottom floor of my apartment so I can't change the router.
The router is assigning a static IP to my AE (192.168.5.101).
I am using WEP 128 bit security.
I have set the AE through Airport Utility to act as a Bridge.
On the imac I set the Network preferences to manually select an IP address (192.168.5.110) which is out of the range of the Router (192.168.5.101-108).
The AE connects and lights up green and the imac recognises the AE but I still cannot access the internet...
I have also tried to wirelessly connect my PC laptop to the AE using other static addresses but I still can't connect to the internet.
Can anyone please help??
Regards
Starwolfgang

Hello Starwolfgang. Welcome to the Apple Discussions!
The router is assigning a static IP to my AE (192.168.5.101).
Are you sure that this provided IP address is static? If so, you also need to note the provided DNS server(s) IPs as well.
On the imac I set the Network preferences to manually select an IP address (192.168.5.110) which is out of the range of the Router (192.168.5.101-108).
Since you configured your AX in bridge mode, your computer will be dependent on the NAT (& possibly DHCP) services provided by your apartment's router. Assuming that your landlord doesn't filter out any IP addresses and that the IP address you set is valid, you need to compare your iMac AirPort's DNS server address settings with that provided by your apartment's router to be sure they match.
Finally, assuming that your apartment provides you with an Ethernet jack, if you connect your iMac directly (via Ethernet) can it access the Internet?

Can I connect my TV sound to Airport Express?

Greetings,
I have a pair of Audio Engine A5 speakers connected to AirPort Express. I use AirFoil from my iMac to stream music from Pandora through Airport Express to the A5s. Now I would like to hook my Samsung TV to the same A5 speakers. Is this possible? How would I do it? What kind of wiring would this require? My knowledge is basic, so any and all details will be appreciated.
Thanks,
BCB

From what I can tell, the A5 speakers have 2 audio input jacks.. One on the top and one on the rear of the speakers.
You simply connect a 1/8" stereo audio cable between one of the audio input jacks on the speakers and the AirPort Express audio output jack, and connect a similar cable from the audio output jack from your Samsung TV to the other speaker input jack. If your Samsung TV has RCA phono audio outputs (red and white jacks) you'll need to use a RCA to 1/8" Y adapter.
I didn't see where the A5 speakers have an A or B audio input switch which means both jacks may be connected to the speakers at the same time. So you should be careful to only have either the TV or Airplay going at one time.

How can I connect my Apple TV and Airport Express to the rest of the network for the least lag?

Hey guys,
I have an Airport network here in the office. All new Airport Extremes. The internet comes into one, which then connects to our switches, which then connects to other Airport Extremes over ethernet. Everything is setup to create its own network with the same SSID, and only the leader is the DHCP server.
I recently added an Apple TV to the network, only it was too laggy for video chat. I bought an Airport Express (for the audio), and ran ethernet to connect it to the network and the Apple TV, but things were still slow.
Now, I set the Airport Express up as a DHCP server (with NAT) itself, with a separate SSID, and it's working great. The only problem is that people would rather not have to switch wifi networks. Is there any way around this? BTW, the AirEx is complaining about Double NAT, which I understand is happening, but it's still working fine... it's really just the having to switch networks that's a problem for us.
Thanks!

Hi - as you probably know, double NAT is not recommended - you might have problems with some websites and updating - but if it is working that is great - as far as the Wi-Fi issue is concerned, you should still be able to create a wireless network with the same name an password as the rest of your network so no one has to switch.

Can i connect my hdvt to an airport express unit using an ethernet cable from the tv to the airport expree, thus joining my wireless network for movie downloads

i have a 40 pioneer kuro hdtv with ethernet jack.
i want to connect it to my local airport network. The tv has some kind of "network" capability.
Could i connect by using an airport express to the tv via an ethernet cable;
Sounds unlikely. (tv also has a usb port).
thanks for any advice.
vince

linc
Thanks for reply.
I mostly want to get some youtube videos and also to send some photos to this tv.
would the netgear WNCE2001 allow me then to connect the tv to the local wifi net?

Can you connect VIA USB port on Airport Express?

I have a Airport Express and have the ethernet port used already. Is is possible to use the USB port to hard wire a computer to the Express? I know it meant for a printer but dont need it for that use.

Sorry, but no. The USB port on the AirPort Express is designed to only support USB printers.

I have an Ipad and Iphone but I don't have an Airprint, only a WIFI printer,my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ?

I have an Ipad and Iphone but I don't have an Airprint at home but only a WIFI printer, my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ? Please help me if anyone knows about this.

Unfortunately, connecting a non-AirPrint-enabled printer to an AirPort base station's USB port will not make it AirPrint-ready.
You will need to use another solution, like Printopia, to be able to print to this printer from an iOS device.

I can print from my macbook pro using airport express usb connected printer, however my iPad is looking for an airprint printer. Can I direct the iPad to the usb connected printer. Both macbook and iPad confirm a wifi connection through the airport exp.

I can print from my macbook pro using airport express usb connected printer, however my iPad and iphone are looking for an airprint printer. Can I direct the iPad/iphone to the usb connected printer. Macbook iphone and iPad confirm a wifi connection through the airport express.

You will need to install an App like Print Central on the iPad to try to print to the printer. It will allow you to print to most printers. Check with their support folks if you need more info.
PrintCentral for iPad on the iTunes App Store

HT4262 How can I connect 6 computers simultaneously to Airport extreme?

I have tried troubleshooting several ways and the some computers work and others don't. How can I connect 6 wireless computers to Airport Extreme?

Matt
Is it possible to speak on the phone? The situation is so convoluted it might be easier to help me get back on track in person. When I first had this issue I got on an apple site that had a chat room in which I typed in my problem. After several missives back and forth, the apple technician asked for my number and we spoke on the phone. The technician walked me through rebooting the actual airport plug (as opposed to the router box) and got me up and running. Do you know how I can relocate that chat site for technical support?
Thanks
David

I am having trouble connecting to wifi network via airport express on my windows xp pc, but I know it is working because I can connect on my macbook, does anyone know what the problem is?

I am having trouble connecting to wifi network via airport express on my windows xp pc, but I know it is working because I can connect on my macbook, does anyone know what the problem is?

Tell us more about the problem, I can think up 100&1 different reasons, but don't have time to go through all the possibilities. So.. what happens?

Can i transmit music from iphone to airport express without being connected to internet?

can i transmit music from iphone to airport express without being connected to internet? just from phone to express via local network or whatever it's called.

Do you mean Lan cable? Can this be done wirelessly from itunes to airport express without the internet connections? I can't connect to an airport express that's not connected to the internet.

Do I need a cable connecting my Time Capsule to Airport Express if I want to use the AE to extend my wifi network range?

I'm a bit confused by conflicting advice given by my local Apple shop and my internet provider.
My cable modem is plugged into a Time Capsule which I use to access the net wirelessly almost all over the house. The one spot the wireless doesn't quite reach is (of course) where I now need my office and iMac to be.
I thought I could just plug in an Airport Express somewhere in the middle to extend the network's range but the guy at my local Apple shop said the Airport Express would need to be connected not just to power but to the Time Capsule, via a cable. That's fiddly and would involve cables running under the floor or along walls and ceilings, not something I can or really want to do. It's not really practical to try and move the cable connection point either.
My internet provider suggested a netgear wireless extender and said that would only need to be plugged into power. The reviews of the netgear product I found comparing it to Airport Express suggest that the Express doesn't need to be connected to anything other than power either to extend a network range (which was what I originally thought).
So I'm wondering which advice is correct? I've also read that the netgear product isn't all that easy to set up so I'd rather stick with. Apple if it will do what I want.
Thanks for any help out there

I thought I could just plug in an Airport Express somewhere in the middle to extend the network's range but the guy at my local Apple shop said the Airport Express would need to be connected not just to power but to the Time Capsule, via a cable.
I'm sure that the guy at the Apple shop means well, but he is not correct.
While it would be preferable to connect the Time Capsule and AirPort Express using a wired Ethernet connection, the Express can connect wirelessly and extend the wireless signal the same way....IF...it is located where it can receive a good wireless signal.

Can't do Factory Reset on New Airport Express

I just tried to install a new Airport Express today on my existing network (Wired to a port on my Airport Extreme). The new Airport Express shows up in the Airport Utility on my Macbook, but no matter what I do (manual or continue) it hangs for about a minute while saying "Reading the Airport Express configuration" and reports an error (-6753 "An error occurred while reading the configuration".
As a side note, which I can't seem to talk to the Airport Express, I have no problem getting to the Airport Extreme and doing whatever I want using the Airport Utility.
I decided to do a Factory Reset to get things back to the beginning. I followed the instructions (unplugged, held reset button, plugged back in, waited while holding the button). At no point did it flash green four times. Instead after about 10 seconds it started blinking yellow rapidly (sounds like the hard reset which is done with power on).
All the Airport Utility comes up with is the Name, IP Address, Version (a revision behind at 7.3.1), and Airport ID. It also shows the icon for the device with a yellow indicator.
Ultimately I'd like to use this device to get better network coverage upstairs -- possibly as a 5 GHz-only port, and then set the Airport Extreme to 2.4 GHz-only.
Any ideas why I can't do a factory reset?
About all the Airport Utility comes up with is the IP, MAC and firmware revision
All I know about this new APexpress is that it is one rev behind on Firmware (7.3.1) but it doesn't want to update.

It appears that the Factory Reset mode simply DOES NOT WORK.
By attaching directly to the APExpress via a ethernet cable (direct, no switch, so nothing else there), and by turning off WiFi on my MacBook, I was able to discover and connect to the APExpress. I changed from extend network to join network, and udpated, then was presented with a green LED. I thought things were working, so I removed the ethernet cable and tried connection by WiFI again, but still the APE would NOT show up.
So I did another direct connect with WiFi turned off. I turned the radio off in the APE as well and was able to connect to it and update the firmware to 7.3.2. Finally I turned the radio back on, and told it to form its own network.
In this mode I am back to getting the flashing yellow LED, and I still can't see the APextreme.
So it looks like either I have a bad APE, or there is some firmware bug between it and the Airport Utility. In any event, after I first connected to the APE via WiFi, fresh out of the box, I was never able to connect again in a way that would allow me to actually configure the product. I've only been able to do this via the ethernet connection and WiFi off.
And, of course, the Factory Reset simply DOES NOT WORK, so I have no way to put it back to the way it was when I first opened the box yesterday.
I'm hoping someone has a solution for this, but beginning to doubt it.

Can't connect a HD to my AirPort Express

Similar Messages

Maybe you are looking for