Can't connect after install

After installing from FTP, I rebooted and then I tried to get some packages with pacman, but it didn't work. I'd like to know why I could connect to download the base packages but can't do it now.
I've checked almost all configuration files in /etc, I've modified some like hosts.allow and hosts.deny, with no results. Making a ping to my ethernet card shows that it works.
Pacman -Syu returns this error:
ftp.xxx.org temporarily unavailable
connection failed
ftp.other.org temporarily unavailable
connection failed
etc...
Please, tell me what do I do now. And yes, I did rtfm.

You should still find the solution so you don't require the use of the initrd. While there are cases where using this boot method are required or beneficial, it is generally best to configure the system so it isn't needed if possible. Besides the slightly faster (perhaps not noticable to some) boot time, it also ensure that the system is properly configured for both hardware and security issues.
Of course there are those who think that if you are happy with things the way they are, don't mess with them. You probably won't learn much about AL this way though.

Similar Messages

Can't connect after installing 9ias 1.0.2.2

I've just installed 1.0.2.2, after having run
1.0.2.0 for six months. I did't migrate, rebuilt from scratch. Everything is running, but I can't connect. Any idea which/where/what tnsnames.ora need to be deleted/modified? There's so much redundancy of config files.

You cannot connect to Apache web listener or Portal? In 1.0.2.2 the default listener port is 7778 (versus 7777 in 1.0.2.0).

Can't connect after installing

I installed the VS.NET integration tools and now an asp.net application can't connect to a 9i database. I haven't changed anything in the original app.
I get the following error:
ORA-12154: TNS:could not resolve the connect identifier specified
Any insight into why this has happened?
Thanks,
Christian

Or 3. Set TNS_ADMIN in the registry so that you only
ever have to maintain one file. This is documented on
technet. I should however have read the original reply first. I strongly suspect that your particular problem will be caused by the new 10g Home becoming the default Oracle home. This can be changed by firing up the OUI and choosing installed products and then the environment tab and setting the first home to be the 9i home. Alternatively of course you could consider moving the whole system to use the 10g client :)
Niall

Can't update after install Yosemite

can't update after install Yosemite

Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
After +/- 10 to 15min my connection is gone.
Does anyone have a sollution?

Lots of people are having the same problem, you're not the only one, belieeeeve me.
Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now. I already posted a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
Site:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

On Mac - Android File Transfer stopped working.   It says Unable to connect after installing the Verizon Software Update Utility from phone

On Mac - Android File Transfer stopped working.   It says Unable to connect after installing the Verizon Software Update Utility from phone.

    Hi JoeC695,
That's not good! We want your software to work properly. Have you tried uninstalling the Verizon Software Utility from your MAC? Do you receive a specific error message?
Thanks,
PamelaF_VZW
Tweet us vzwsupport

Safari can't connect after latest Lion update

Just updated my software and now safari can't connect to websites. It connects for a bit then after awhile it will no longer connect. Firefox and Chrome are connecting fine so this is a safari only issue with the latest update.
Safari Version 5.1.5 (7534.55.3)
Quiting safari and restarting works for a little while then eventually 'can't connect to server' eventually appears. I'm going back to firefox until this is resolved.

Linc Davis
Currently Being Moderated Re: Safari can't connect after latest Lion update
Apr 2, 2012 5:35 AM (in response to rtorca)
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.
Hi I have the same sort of problems I carried out the two tests and the problem appears to only be in my profile not in guest profile. Is there a cure?

Intermittent Internet Connection and VPN clients can't ping internal LAN but connected after installating cisco ASA5512x

Hi!
I wish someone can help me on this, I'm a new guy on cisco firewalls and I'm currently implementing cisco asa 5512x, here are the details:
ISP -> Firewall -> Core switch -> Internal LAN
after installing the cisco asa and terminating the appropriate lan for the outside and inside interfaces, internet seems intermittent and cisco vpn client can connect with internet connection but can't ping internal LAN.
here's my configuration from my firewall.
ASA Version 8.6(1)2
hostname ciscofirewall
enable password 2KFQnbNIdI.2KYOU encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address 203.x.x.x 255.255.255.0
interface GigabitEthernet0/1
nameif inside
security-level 100
ip address 10.152.11.15 255.255.255.0
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/4
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/5
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
ftp mode passive
dns domain-lookup outside
dns domain-lookup inside
dns server-group DefaultDNS
name-server 4.2.2.2 -------> public DNS
name-server 8.8.8.8 -------> public
name-server 203.x.x.x ----> Clients DNS
name-server 203.x.x.x -----> Clients DNS
same-security-traffic permit intra-interface
object network net_access
subnet 10.0.0.0 255.0.0.0
object network citrix_server
host 10.152.11.21
object network NETWORK_OBJ_10.10.10.0_28
subnet 10.10.10.0 255.255.255.240
object network NETWORK_OBJ_10.0.0.0_8
subnet 10.0.0.0 255.0.0.0
object network InterconHotel
subnet 10.152.11.0 255.255.255.0
access-list net_surf extended permit ip any any
access-list net_surf extended permit ip object NETWORK_OBJ_10.10.10.0_28 object InterconHotel
access-list outside_access extended permit tcp any object citrix_server eq www
access-list outside_access extended permit ip object NETWORK_OBJ_10.10.10.0_28 any
access-list outsidevpn_splitTunnelAcl standard permit 10.152.11.0 255.255.255.0
access-list LAN_Users remark LAN_clients
access-list LAN_Users standard permit any
access-list vpnpool extended permit ip 10.10.10.0 255.255.255.248 any
pager lines 24
logging enable
logging asdm informational
mtu management 1500
mtu outside 1500
mtu inside 1500
ip local pool vpnpool 10.10.10.1-10.10.10.6 mask 255.255.255.248
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 destination static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 no-proxy-arp route-lookup
object network net_access
nat (inside,outside) dynamic interface
object network citrix_server
nat (inside,outside) static 203.177.18.234 service tcp www www
object network NETWORK_OBJ_10.10.10.0_28
nat (any,outside) dynamic interface
object network InterconHotel
nat (inside,outside) dynamic interface dns
access-group outside_access in interface outside
access-group net_surf out interface outside
route outside 0.0.0.0 0.0.0.0 203.x.x.x 1
route outside 10.10.10.0 255.255.255.248 10.152.11.15 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication telnet console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 10.0.0.100 255.255.255.255 inside
http 10.10.10.0 255.255.255.240 outside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto ikev1 enable outside
crypto ikev1 enable inside
crypto ikev1 policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
client-update enable
telnet 10.152.11.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
enable outside
anyconnect-essentials
group-policy outsidevpn internal
group-policy outsidevpn attributes
dns-server value 203.x.x.x 203.x.x.x
vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-client
split-tunnel-policy tunnelall
split-tunnel-network-list value outsidevpn_splitTunnelAcl
default-domain value interconti.com
address-pools value vpnpool
username test1 password i1lji/GiOWB67bAs encrypted privilege 5
username test1 attributes
vpn-group-policy outsidevpn
username mnlha password WlzjmENGEEZmT9LA encrypted
username mnlha attributes
vpn-group-policy outsidevpn
username cisco password 3USUcOPFUiMCO4Jk encrypted privilege 15
tunnel-group outsidevpn type remote-access
tunnel-group outsidevpn general-attributes
address-pool (inside) vpnpool
address-pool vpnpool
authentication-server-group (outside) LOCAL
default-group-policy outsidevpn
tunnel-group outsidevpn ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
inspect http
inspect ipsec-pass-thru
class class-default
user-statistics accounting
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
hpm topN enable
Cryptochecksum:edc30dda08e5800fc35b72dd6e1d88d7
: end
thanks. please help.

I think you should change your nat-exemption rule to smth more general, like
nat (inside,outside) source static any any destination static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 no-proxy-arp route-lookup
'cause your inside networks are not the same as your vpn-pool subnet.
Plus, if you're trying to reach inside subnets, different from 10.152.11.0 255.255.255.0 (ip from wich subnet is assignet to your inside interface, and for wich above nat exception should be enough), you should check if routing is configured from that subnets to your vpn-pool-subnet through the ASA.

Can;t connect after comcast install

my airport worked previously with a cablevision modem hookup.
now, with comcast, i can only connect directly via ethernet...my AX shows a green light, and network diagnostics show the AX is working but the ISP is not, yet when i connect direct to the comcast modem it works fine....any ideas?
terayon TJ 715 is the modem connected to the cable.
Thanks!

It is important to do a complete power recycle of your network components when changing equipment. Try the following, in order, checking for Internet access after each step, until resolved:
1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
3. Perform a complete power recycle of your network components as follows:
Modem/Router Power Recycling - Quick
o Power-off the modem, AirPort Express Base Station (AX), & computer(s); Wait at least 5 minutes.
o Power-on the modem; Wait at least 5 minutes.
o Power-on the AX; Wait at least 5 minutes.
o Power-on the computer(s)
If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
Modem/Router Power ReCycling - Full
o Power-off the modem, AX, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
o Power-on the modem; Wait at least 15 minutes.
o Power-on the AX; Wait at least 5 minutes.
o Power-on the computer(s)
4. Contact your ISP to have them perform a "modem reset."

Bluetooth Keyboard/Mouse/Trackpad won't automatically connect after installing Boot Camp

Hey guys!
Another peculiar thing happened to me today with my 3-week-old maxed-out 2012 iMac (other than it kernel panicking when I powered it down the other day...did I mention this was 3 weeks old?).
After installing Boot Camp which I will never do again, my iMac (on the OS X side) no longer recognizes my stock Apple Wireless Keyboard, Magic Trackpad, or Magic Mouse automatically, until I press a button on the keyboard and wait 5 seconds, click the trackpad and wait 5 seconds, or click the mouse and wait 5 seconds.
(The Windows 8 Boot Camp side pairs with the devices immediately after Windows boots, which leads me to believe that the bluetooth devices are defaulting to look for Windows.)
One of my huge fears I had when considering purchasing an iMac is that the Bluetooth devices wouldn't immediately connect. Being a power-user with former Mac notebooks and working understandably fast having owned a web development company for 8 years now and not having to worry about Bluetooth device pairing, I'd like to think this fear is substantiated. But after first use (before installing Windows 8 with Boot Camp Assistant) it functioned normally and the iMac would automatically discover my peripherals and connect them by the time time computer turned on. I also had no trouble holding the Option key on boot to select a boot device....
Now, ever since I set up Windows 8 on the Boot Camp partition and paired the keyboard/mouse/trackpad to Windows, the Mac side completely ignores the keyboard/mouse/trackpad until I click a button on each.
I'm trying to keep it together but this is raging me out.
I went into Windows, immediately unpaired the 3 peripherals from windows and now use a wired keyboard/mouse with Windows (yay, desk space!), deleted the items entirely from the bluetooth panel, then booted to Mac and did the same thing. I then re-paired the devices to the OS X side andddd...no go! Still doesn't find them automatically. I am extremely upset by this and can't seem to fix it.
To summarize, my two issues are:
A. The iMac in OS X does not automatically recognize my bluetooth peripherals until I click a button on each and wait a couple seconds for them to pair.
B. I cannot hold Option to select a boot device (or choose Windows/Mac for example) because the computer doesn't recognize the keyboard until OS X boots and I press a key.
Please...for the love of god...someone help me, and stop me from formatting my entire computer over this issue.

I don't have a logitech mouse, but is it possible that the mouse is going to sleep during the reboot, and is thus unavailable when the OS is looking for it?

Can't connect or install skype on server 2008R2

Ok, so I have this problem.
No one can use skype on server. Whe you try to sign in, after some time of trying, skype says can't connect. But it was working sometime ago. First, I thought it was the problem with old version. So tryed to upgrade it to version 7.0.0.102 - i couldn't do that. Skype just craches or says it can't connect to server, try to download it manually. When i do that - nothing happens. The error when skype craches is below:
Faulting application name: SkypeSetup.exe, version: 7.1.0.105, time stamp: 0x54c263f3
Faulting module name: dhcpcsvc.DLL, version: 6.1.7600.16385, time stamp: 0x4a5bd9b5
Exception code: 0xc0000005
Fault offset: 0x00001b2d
Faulting process id: 0x57a0
Faulting application start time: 0x01d03c5d3def6fa0
Faulting application path: E:\Users\*****\Downloads\SkypeSetup.exe
Faulting module path: C:\Windows\system32\dhcpcsvc.DLL
Report Id: 8081c41b-a850-11e4-8a66-00155d03e65d
So, i downloaded full version of skype, installed it. Tryed to sign in - same thing, can't connect.
Firewall is ok. Tryed to delete it as mentions in some posts in here. Also, on server, that is identical to this, skype works fine.
Any thought how i can fix this issue?

Please, run the DirectX diagnostics tool (32-bit mode).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Why does my iMac shut down before it can boot up After installing 7.3 update on my iMac?

After installing 7.3 last night, I hit restart and went to bed. My intel iMac i7 3.4ghz was powered down this morning, and only after unplugging,waiting, rep plugging,
It finally powered on, only to boot to the gray apple screen, go black and silent. (this exact issue had me lugging it back to apple a month after purchase, today is 93 days)
Recovery mode got me about one second further in bottling up before shutting off.
I was forced to upgrade from an unproblematic pc g5, after iCloud, so do not own snow leopard and was told I would never need a re install disc.
Has anyone having the powering off during boot after updating to 7.3?

omg. I would copy and paste your original post to the iMac section. You're talking about a fine piece of equipment, the Intel iMac i7 3.4ghz , and you should not be having such problems. Maybe others in the iMac i7 community might also have some ideas.
Re: the safe boot. That's good that it worked. This is fairly new and very, very helpful with a dead computer because at least you can get to Safari, get to the Internet and get ideas and seek help.
But why did it shut off after a while? That's not right. No reason it should have done that.
From something you said I would worry about your power supply problem or this PerIphrEa. I don't know what that is but Migration is built into Lion OS, no? Third party perificials (or apps) can certainly cause conflicts and not work as well as advertised.
Also, seriously, I would get some tape, like duct tape, and tape up that loose power supply.
Why do you need something extra for your migration? (Or is the reason your old PowerPC G5 needs to run Lion but it can't?).
If that is the problem, here's an idea. Continue the canibalization of your PowerPC G5, take out it's hard drive(s). Buy an 'enclosure' to put the hard drive in and allow you to connect this hard drive to your new machine, the beautiful iMac i7, using the old hard drive as an external drive.
I did exactly this with my old PowerPC G5, using this enclosure, a Macally G-S350SUA, info at: http://www.macally.com/en/product/ipod4show.asp?ArticleID=215
I now use this for my Time Machine backups.
Re:What is the proper amount of time the computer needs to be unplugged? This would worry me. I turn off my comuter NOT by unplugging it but by holding the power on button for about 3-4 seconds and then it turns off.
I then wait 5 long seconds before pressing the power on button again to turn the computer back on.
Having to plug in and unplug and plug in and having to wait ten minutes for it to work is not normal.
Is there a power supply issue in your home, perhaps?
Considering the value of this machine and the fact that it may still be under warrenty, I'd consider the weeklong diagnostic. Would the machine have the same need to wait ten minutes to turn on at the Apple place?
What if you plug it in at a friend's house, or an office or library? Would it still take ten minutes before you could turn the machine on?
It might seem horrible to have to wait a week...or to do this again and again but I'd recommend taking full advantage of your warrenty, keep sticking this problem back to Apple and insist it gets made right. It will be worth it in the long run.

Lost internet connection after installing BT dongle (MS-6967)

I have tried installing the MSI Bluetooth USB dongle (MS-6967) drivers twice. I tried the 1.3.1 version and the 1.4.2 version drivers. The Bluetooth dongle itself works fine, but both times I lost my internet connection after installation. After this I have to remove the drivers and repair my installation with the Windows CD, but then windows and all of my programs also need to be updated again since my original Windows CD is a first release version.
The weird thing is that I can connect to other local computers and I can even ping external computers, but browsing websites (on IP address), looking up domain names and retrieving mail are no longer possible. I have no firewall software installed.
Does anyone konw how to fix this?

Am I really the only one with this problem? Well I have seen someone else on another forum ...
Maybe someone knows how to reinstall just the TCP/IP stack?
I'm using a notebook with buil-in network card. It runs W2K dutch version SP4 and things worked before when I was using SP1. Somehow it doesn;t work now anymore. Before I start reinstalling everyting again, I just want to check once more if anyone has some tips for recovering.

Local NAS not connecting after installing Lion, what is the fix ?

After installing Lion, my local NAS is not connecting, what can I do to fix it.

I have the same problem with my Conceptronic CH3HNAS and have found a free and easy solution.
Since a lot of people report they are able to access their NAS using apps other than the Finder itself, I decided to look for a free Lion-compatible File Manager to use instead of Finder.
I have found muCommander ( http://www.mucommander.com/ ) and indeed it works fine. All I did was click on the button highlighted bellow, go to "bonjour services" and select my NAS. It prompted me for my username and password and voilá, it works fine.
I keep Finder for everyday use and just load muCommander when I want to access the NAS. At least now I don't have to start my WinXP VM anymore just to access it.
Hope it helps you.

WPA2-enterprise WIFI can't connect after upgrading to 6.1 or higher

Hi. Please help.
We have a campus wifi with two ssids: one open for everyone and one closed with wpa2-enterprise (PEAP) security for staff. All iphones and ipads works just fine on ios version 6.01 but they can't connect to secured wifi network after updating to ios ver 6.1 and higher (tried 6.1.2). They still able to connect to open wlan ssid. Our WIFI equipment is: Extremenetworks WM3600 controllers and AP4600/AP4511 access points running WM5.4.1. WMM enabled.
WM3600 controller use Windows2008 r2 NPS server + active directory for authorization (selfsigned certificates is 2048 bit length).
WM3600 wlan staff configuration settings:
wlan Staff
description TOGU staff network
ssid STAFF
vlan 238
bridging-mode tunnel
encryption-type tkip-ccmp
authentication-type eap
no answer-broadcast-probes
protected-mgmt-frames optional
radius vlan-assignment
no motorola-extensions symbol-load-information
use aaa-policy Domain_aaa
Here is the log from iphone configuration utility with connection error:
Feb 20 17:18:00 kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Feb 20 17:18:00 Preferences[132] <Warning>: -[VPNConnectionStore reloadVPN]: The active VPN configuration has changed from to (null)
Feb 20 17:18:00 Preferences[132] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0x1edbea10:<VPNBundleController: 0x1edbea10>): _serviceCount(0), serviceCount(0), toggleInRootMenu(0), RootMenuItem(1)
Feb 20 17:18:00 wifid[14] <Error>: WiFi:[383033880.387575]: Failed to associate with STAFF: -3900
Hope to get any help.

Yes. We tried to reboot iphone(s), tried also with ipads 6.1. We tried to reset network settings.
We tried to add wifi profile to clean new iphone using iphone configuration utility.
Wireless supplier can't help - they told it is an ios issue and I think this is true because all
ipads/iphones works just fine on ios5 or 6.0.1 but can't connect on 6.1

Can't connect after install

Similar Messages

Maybe you are looking for