Can't connect airport express to airport extreme

I have the same question as Bob did about an hour ago. I'm trying to connect a sound system in another room to my computer. I have purchased airport extreme and have it hooked up. I've also gotten airport express, but I can't seem to get airport utility to recognize it. I have moved it to the same room and even connected it to the airport extreme, but to no avail. Everytime I do a rescan it only shows my airport extreme and the airport express light continues to blink amber. What else can I try?

You want to "extend" your network. To start, configure your AirPort Extreme and, under the Wireless tab, enable the option to "Allow this network to be extended."
From my experience, the two AirPort units need to have configuration settings that are as close to each other as possible, including such things as network name, encryption type, and channel. Some things obviously need to be different. For example, you don't want both units distributing IP addresses.
You'll also want to enable the Ethernet port on the AirPort Express, otherwise you won't be able to use it to connect your MacPro.

Similar Messages

Is it neccessary to buy an AirPort Express or AirPort Extreme for my macbook pro to connect WI FI or wireless?

so I have a macbook pro, but i don't know whether i need to buy an AirPort Express or AirPort Extreme to connect to WI FI or wireless. or i only need to modem??
HELP!!! :'(

Airport Extreme is used by Apple for its wireless routers and the hardware inside your MacBook Pro that is used to connect to a wired or wireless router. http://en.wikipedia.org/wiki/AirPort_Extreme#AirPort_Extreme_Base_Station
While Apple would like you to buy everything from them you can use any brand that will work with Macs. My setup is a Qwest DSL modem connected to a NetGear wireless router. The Airport Extreme card inside my MacBook recognizes them without any problems

Can't connect to internet through Airport Express anymore

Suddenly, my PowerBook can't connect to the internet through Airport Express. Monday late afternoon--everything was fine. Put it in sleep, come back a few hours later, can't connect.
Thing is, Airport/wireless is working. Can stream audio to my home stereo.
And the DSL/modem are working. If I connect the machine via ethernet directly, I'm online.
Saw that some other users began having problems with USB/printer connections Monday. Could my problem be related?
What gives?
Any ideas?

Hello mnkyby. Welcome to the Apple Discussions!
It sounds like your AirPort Express Base Station (AX) in not getting a proper IP address from your modem.
Try this ...
o Connect to the AX's wireless network, and then, run the AirPort Admin Utility.
o Go to the Internet tab.
o Note the value for IP address. (Note: Do not list it here on the forum, just note what it is.)
o Is the IP address what you would expect from your ISP or is it something like: 196.254.x.x?
If the latter, try the following ...
Modem/Router Power Recycling - Quick
o Power-off the DSL/Cable modem, AX, & computer(s); Wait at least 5 minutes.
o Power-on the DSL/Cable modem; Wait at least 5 minutes.
o Power-on the AX; Wait at least 5 minutes.
o Power-on the computer(s)
If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
Modem/Router Power ReCycling - Full
o Power-off the DSL/Cable modem, AX, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
o Power-on the DSL/Cable modem; Wait at least 15 minutes.
o Power-on the AX; Wait at least 5 minutes.
o Power-on the computer(s)

Can't connect (wireless) to my Airport Express anymore with iBook, iPad or iPhone.

Can't connect (wireless) to my Airport Express anymore with iBook, iPad or iPhone. It still recognizes the printer on the iBook (bonjour), but not on my Windows notebook (work). The only device that still connects via wireless is the PlayStation 3.

The latest firmupdate solved the issue.

I can not install the Express after the Extreme tha AirPort tool is of no help. It does not display any base station.

I can not install the Express after the Extreme tha AirPort tool is of no help. It does not display any base station.

What is the exact model of the AirPort Express that you are trying to install? Which version of the AirPort Utility are you using? What is the operating system and version, and on what device, are you running the AirPort Utility on?

Can I connect an A1084 model Airport Express using current version of Airport Utility

Can I connect an A1084 model Airport Express using current version of Airport Utility?

You will need an older 5.x version of AirPort Utility to be able to administer the older AirPort Express. That would mean that you need to have....or be able to borrow for 10-15 minutes......a Mac running Leopard (10.5.x), Snow Leopard (10.6.x), or a PC with AirPort Utility installed on the device.

I use my ps3 online gaming, is the airport extreme or the airport express be compatible with ps3? Is it going to be a better connection compair to other router? Which one is a better choice for me, airport express or airport extreme??

I bought linksys EA3500 router. Its still in the box and before I open it I want to learn more about the apple airport router, is the apple going to work with my online games with ps3? I have iPad, 2 iPhones, apple tv and Mac mini. If the airport express or airport extreme is a lot better and will work for ps3 which one should I get?

Airport will work with PS3. From what you've stated, the Extreme is more than you need. Buy the Express.

I have an AirPort Extreme time capsule . I need to extend my wifi network range. Which devise is better ?? Airport express or AirPort Extreme ??

I have an AirPort Extreme time capsule . I need to extend my wifi network range. Which devise is better ?? Airport express or AirPort Extreme ??

Since you have the new Time Capsule, then you will need a new AirPort Extreme to match the performance capabilities of the Time Capsule.
If best quality is preferred, you will need to connect the Time Capsule and AirPort Extreme using a wired Ethernet connection between the devices. The advantage of doing it this way is that you can locate the AirPort Extreme exactly where it is needed...and there will be no loss of signal through the Ethernet cable.
A wireless connection will result in a significant drop in performance, but it might be OK for your uses, if you want to try it that way first to see if the performance is acceptable.
It is really important that the AirPort Extreme be located where it can receive a strong wireless signal from the Time Capsule.
A line-of-sight relationship between the Time Capsule and AirPort Extreme would be the goal, with the AirPort Extreme located about half way between the Time Capsule and the general area where you need more wireless signal coverage.

Airport Express or Airport Extreme Base for home wireless

I've read some of the comparisons between the Airport Express and Airport Extreme Base station to make an informed choice before purchasing. The Airport Express probably will suffice for my needs, plus having AirTunes is a bonus. Mobility is not such a concern (most hotels now offer wireless in any case, making the Express less appealing than when it first came out).
But my only concern with Airport Exress is durability and quality. Some postings on the Apple site note that these can go bad after a year or so. I realize that only those having problems are posting but wondered if there might be some issues with the Express that would make the Extreme Base station a better decision, especially since it's only $30 more now.
Thanks in advance.

Actually it really boils down to your needs.
Either one will work and work well, but if air tunes, and portability is important Express is the way to go. The Extreme is a very good choice as well.
I suggest you look over both of these links and decide the features you need.
http://www.apple.com/airportexpress/
http://www.apple.com/airportextreme/
Good Luck
Don

HT1998 How can I administer a Gen 1 Airport Express from Airport Utility 6.3.2 (OS 10.9). I can see the base station but get the message: "This version of AirPort Utility doesn't support this base station. Go to AirPort Service and Support for more inform

How can I administer a Gen1 Airport Express from, my MacPro (OS 10.9, Airport Utility 6.3.2). I can see the Express in the WiFi window but from the Airport Utility I get the following message: " This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Of course there's nothing of value on the support page. Any clues anyone?

Apple has dropped support in Mavericks (10.9) of the AirPort Express and AirPort Extreme models that were discontinued more than six years ago.
You can still administer the older AirPort models if you have a Mac running Leopard, Snow Leopard, or a PC.

Extend Wifi with Airport Express when Airport Extreme is in Bridge Mode

Hello,
I'm trying to make my Wifi network easier at home but Im having some trouble.
My Internet Provider installed a Router at home. So I had to connect my Airport Extreme to the IP Router via cable and setup in Bridge Mode.
In my Airport Extreme I created a Wifi Network called WIFI HOME.
Than I connected two Airport Express into my Airport Extreme via cable and created two new wifi networks: WIFI HOME 2 and WIFI HOME 3.
But, in my opinion, this is not cleaver way to have my Wifi Network setup, since I have to change networks all the time.
The problem is that every time I tried to extend my current WIFI HOME setup into one of the Airport Express, the Airport Express crashes during the setup reset and my network starts to behave wrongly.
I'm starting to think that is something related to the Bridge Mode in my Airport Extreme. but I want to check with you guys if that makes any sense.
Thanks a lot!

Power off both of the AirPort Express devices
Disconnect the Ethernet cables
Wait a minute
Power up one of the AirPort Express devices for a few minutes
Hold in the reset button on the Express for 10 seconds and release
Allow a full minute for the AirPort Express to restart to a slow, blinking amber light
Connect the Ethernet cable to the WAN "O" port on the AirPort Express if it is a two port version
Click the AirPort icon at the top of the Mac's screen
Look for a listing of New AirPort Bsee Station
Click on AirPort Express
The setup utility will open up automatically and take a minute to analyze the network. Then, it will suggest that the Express be configured to Extend the AirPort Extreme network.
Type in a name that you want to call the AirPort Express. Example........Express1
Click Next
Then, the screen message will change to indicate that the AirPort Express is being configured to extend using Ethernet.
When you see the message of Setup Complete, click Done.
The first Express is now set up and working correctly.
Set up the second Express exactly the same way........except give it a different name to avoid confusion.....Example......Express2.

What's the difference between airport express and airport extreme?

airport express and airport extreme? whats the difference??

http://store.apple.com/ca_epp_5000967/product/MC414/airport-express-base-station
http://store.apple.com/ca_epp_5000967/product/MD031AM/A/airport-extreme-base-sta tion

Airport Express and Airport Extreme

Hello,
I am trying to setup a wireless network. What is the difference btw Airport Express and Airport extreme. Do i need both? If yes then why?
Would appreciate a solution from layman's perspective.
Thanks

Hello Indian71. Welcome to the Apple Discussions!
Check out this excellent iFelix table to help show the differences (features-wise) between the AirPort base stations: AirPort base station differences

Girlfriend's computer can't connect to Express network with password-help!

Hi, first post here so please be gentle with me!
I have an Airport Express router which is working fine with my MBP running Leopard. Last week, my girlfriend got a new white MacBook but this new computer is unable to join my network when it is password-protected - I just keep on getting a message saying 'connection timeout' when I try and join the network. It works fine when I remove the password protection for the network, but this is hardly ideal because my network is then completely unsecured and anyone can join (I live in a block of flats). Also, whilst password protection is in place the problematic computer cannot find the Airport Express using Airport Utility, so I would be unable to make any changes if my computer was unavailable. I would be grateful for any guidance or help to resolve these issues as I want my network secure again!
Finally, I've noticed throughout my experimentation with security settings that my internet speeds are noticably improved when my wireless network is unsecure - has anyone else noticed this, and is the problem fixable?
Many thanks in advance for any advice.

I've downloaded Air Radar and our wireless network is on a separate channel to everyone else's and is apparently mostly running OK (although at one point last night it totally went dead and I just turned everything off in frustration). I've tried to simply put everything back to how it was before the problem started by making the network open and unprotected, which (after unplugging the modem and the Airport Express overnight and starting again this morning) seems to have helped on my computer, even though the internet is running slower than it was last week when everything was fine for both computers.
However, my girlfriends computer still won't connect to the internet. Last night it appeared to be because Airport on her computer had a self-assigned IP address which prevented the computer connecting to the internet - today I have turned off the Firewall and flushed the ipfw cache and although initially I could join the network (although not access the internet) it has just dropped the connection. Network diagnostics won't help because when it scans it doesn't appear to find any networks - just keeps scanning indefinitely.
I'm getting to the point now where I'm thinking of just formatting the hard disk and reinstalling the OS and starting again, unless anyone can offer any better suggestions?
Thanks in advance for any help!

Can't connect my express to my time machine base station?

can't connect my express to my time machine base station I am in a loop and frustrated

Ok, you have an older 802.11g AX. The steps to configure it for streaming are the same for both models. Let's go over it quickly just in case something was missed.
AirPort Express Base Station (AX) - iTunes Setup
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <existing TC's wireless network>
Wireless Security: <select the encryption type of the existing wireless network>
Wireless Password: <enter the existing wireless network password>
Verify Password: <re-enter the existing wireless network password>
AirPort Utility > Select the AX > Manual Setup >Music
Enable AirTunes (checked)
iTunes Speaker Name: <enter desired speaker name>
iTunes Speaker Password: (optional)
Verify Password: (optional)
Click Update to write the new settings to the AX
Please post back your results.

Cannot See Airport Express in Airport Utility

I've been browsing the other topics, but don't see one with my exact problems.
I got an Airport Express for Christmas and was able to get it to work on my parents network; but now that I'm at home, I can't get it to even show in the Airport Utility. I've reset the AX by holding down the button for over a second. I've set my Airport Extreme to be extendable and to be n/g compatible.
I've seen advice like making the name and pass match the base station, but I can't even get to a point where I can see it...
Advice?
Thanks,
Chris

I had similar problems and was able to resolve my issue like Simon. I think you need to hard reset your Airport Extreme base station first, then open Airport Utility and reconfigure it using WAP2 encryption. Then hard reset your Airport Express (by the way, you need to unplug it, push the reset button using a paper clip and keep holding it down while plugging it back and wait until it flashes green 4 times, then release) then you should be able to see your airport express in Airport Utility, and reconfigure it to use WAP2 (I used the same password for both base stations) and, at least in my case, voila! all lights turned green and worked. Good Luck,
Ron

Can't connect airport express to airport extreme

Similar Messages

Maybe you are looking for