Can't connect any BB10 device to my Mac

After I installed the MacBook pro EFI Firmware Update 1.3, none of our devices (we have a few of them running on all released OS's) would connect to my Mac. I'm running the latest BB Link (1.1.1.39) and sometimes I see that the device connects and disconnects repeatedly every 2 seconds, sometimes Link doesn't even know there is a BB10 device connected. When I go to "Settings->About->Network" however, I see that the device has a 196.254.0.1 IP address (for the USB interface), but when I try to ping that address all the packets are lost.
I tried re-installing BB Link, restarting devices, but no luck.
It is very frustrating since I can't continue developing for BB. Within momentics I can only pair devices via Wifi and as soon the debug token is successfully uploaded onto the devices, momentics shows it is disconnected.
Please help.

Under Settings>Storage and Access>Access to Storage make sure the "USB connection" is set to automatic or you preferred system
Twitter: @IAmBenGiey | Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Try my apps:
The Ultimate Currency Converter and T2G - BloGFeed

Similar Messages

Problem with bluetooth driver (bootcamp windows 7) ! Can't connect any bluetooth device...

1st word, so sorry about my poor English !
My device here is : macbook pro mid 2012 MD101 (MacOSX & Windows 7 Ultimate, my question here's on Windows 7) !
I have a bluetooth mouse and a speaker, at my workplace I need to use 2 devices wireless, although they have both got wires (for aesthetics ya know )
I've also installed full bootcamp drivers, but bluetooth driver's still not work at all ! So can someone show me how to install bluetooth driver correctly, please ?
Many thanks to ya all !

There are a number of posts related to accessing and/ copying issues between Windows Vista / 7 and AirPort Disks. Two potential solutions being forwarded are: 1) Changing the LAN Manager authentication level, and/or 2) Disabling the Windows Search feature.
To change the LAN Manager authentication level:
From the Windows Vista / 7 desktop, click Start
Search for: security
Click 'Local Security Policy'
Goto Local Policies > Security Options
Under Policy, double-click 'Network security: LAN Manager authentication level'
Change level to: Send LM & NTLM responses
Under Policy, double-click 'Network security: Minimum session security for NTLM SSP based (including RPC) clients'
De-select 'Require 128-bit encryption'
Click OK
To disable Windows Search:
Start > Control Panel > Programs > Programs & Features
On the right-hand side, click "Turn Windows features on/off"
Scroll down, and de-select "Windows Search".
Press OK, close all windows and restart.
A third "solution," that has worked for me, is verify that both the AirPort base station and the Win7 PC are using the exact same Workgroup Name. In my case, I use "WORKGROUP" (without the quote marks) for this name. From the AirPort Utility, you would enter this value on the Disks > File Sharing tab. On Win7, Start > Control Panel > System and Security > System > Change Settings > Change > Workgroup

Bluetooth does not work, i can't connect any device

bluetooth does not work, i can't connect any device

What device?
Iphone supports bluetooth for stereo headsets/speakers, handsfree telephone devices/headsets, some keyboards, some peer-to-peer apps from the app store, adn internet tethering where provided by the carrier.
Other than this it will not connect to another phone, computer ,device

After downloading the latest Itunes software, I can't connect any device to Itunes!

After downloading the latest Itunes software, I can't connect any device to Itunes. I am using windows 7!

i am using windows 8 and still can't find my iphone on itunes

My iPhone 4s Bluetooth is not working, I have ios 5.1 but just can't get my Sony erricson hbh-pv715 headset to connect to the phone, the phone can't find any Bluetooth device, can you help please

My iPhone 4s Bluetooth is not working, I have ios 5.1 but just can't get my Sony erricson hbh-pv715 headset to connect to the phone, the phone can't find any Bluetooth device, can you help please

Yes it's in pairing mode, it worked fine with the 3GS but doesn't seem to work with the 4s, my 4s can't find any other bluetooth device, I think the problem ls with apple?

TS1363 I want to use an old 3 GS iPhone that is no longer in service as a phone now as just an iPod to play music. When I connect the phone to the computer with iTunes running, iTunes says it can't connect to the device because it didn't get a valid respo

I want to use an old 3 GS iPhone that is no longer in service as a phone now as just an iPod to play music. When I connect the phone to the computer with iTunes running, iTunes says it can't connect to the device because it didn't get a valid response from the device. How can I get the system to recognize the phone, and let me rename it as my iPod, instead of my phone?
As an aside, the current installed operating system on this old iPhone is 4.2.1, but that wasn't one of the selectable options in the operating system list dropdown below. Don't know if that makes any difference.

Hi maddogdne,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
Using an iPhone without a wireless service plan
http://support.apple.com/kb/ht3406
Cheers,
- Judy

I bought an external hard drive for backups to use with Time Machine, but however when I try to connect it with the other windows laptop it doesn't work ? intact it doesn't work on any other device except my MAC ?

I bought an external hard drive for backups to use with Time Machine, but however when I try to connect it with the other windows laptop it doesn't work ? intact it doesn't work on any other device except my MAC ?

Do not worry about it.
Time Machine needs that your external drive is formatted in HFS+, or better known as "Mac OS Extended (Journaled)". This filesystem is used by Apple on Macs and Windows cannot read or write drives formatted with this filesystem, being this the reason why all your devices do not read the external drive except your Mac.
You can only use your external drive to make Time Machine drives. If you store anything different, you may damage the Time Machine structure, so it is better not to use it as a drive to store other data. Instead, get another external drive to do it or create a second partition on the external drive formatted in FAT32 by using Disk Utility > http://pondini.org/OSX/DU3.html FAT32 can be read by Windows PCs

Sony Ericsson W810i and iSync 2.4: "can not connect to this device"

I am using Mac OS 10.4.11 and iSync 2.4, which I believe are the most up to date versions. My Sony Ericsson W810i is shown as being compatible with iSync as shown on the iSync support page, but while I try to add the phone to it I get the message:
"W810i
iSync can not connect to this device".
Does anybody have any ideas how to sort this problem? I've tried restarting both my computer and phone before trying again.

I finally figured out how to fix this problem. The mobile phone had to be initially added by the computer under Bluetooth to pair them before adding the device to iSync. Adding the computer as a device to the phone to pair them, as I had been doing, didn't allow it to work with iSync.

My Windows XP AirPort util and Bonjour can't find any wireless device

I have both macbook and a PC laptop.
I just started using my TimeCapsula and all features (Internet gateway, access to the USB printer and the external harddisk) are visible and working fine when using my macbook.
My PC wireless card seems to be working fine too and I can access the Internet using the Airport gateway.
My problem is that Airport Util and Bonjour on my PC "can't find any wireless devices" (even though It is clearly working fine) and therefore don't detect/mount the external drive or the Printer.
Thanks!

How do your Extreme and Express connect to one another? Wired Ethernet between the two, or wirelessly?
Try unplugging the Express. Does that change anything?
Wireless interference could cause the symptoms you're describing. Even though you did nothing to your wireless network, the presence of other wireless networks or introduction of nearby devices will bring interference where there was none before.
AirPort and Bluetooth: Potential sources of interference for wireless devices and networks
Try changing wireless channels; use "automatic" unless you have reason to use a specified channel. Try checking "interference robustness". Altering these settings may help, but they could make things worse.
If you are unable to configure a device over Airport, or changing a setting leaves you unable to configure it wirelessly, connect its Ethernet port to your computer's Ethernet port and Airport Utility should find it.
As a last resort, try a "hard reset" followed by re-configuring the Extreme, Express, or both. Start by removing your Express from the network. Re-configure the Extreme and see if that fixes things. If it does, add the Express to your network and re-configure it as well.
AirPort troubleshooting guide
I open airport utility ... can not locate any of my wireless devises, airport extreme base,, airport express, apple tv, wifi printer.
AirPort Utility will only detect Apple AirPort base stations (Extreme, Express, Time Capsule) for purposes of configuring them. It is not designed to detect or configure other wireless devices like your printer.

Iphone4s can's search any BT device after upgrading to 7.0.3

2 iphone4s can's search any BT device after upgrading to 7.0.3
it can work well with IOS 6.0.3, but fail to search any BT device with 7.0.3
Tesing BT device
1: Plantronics Voyager Legend earphone
2: other Mobile phone BT ( available), and other MobileDevice can search this iphone and successfully paried, iphone can‘t search any device，
Keep the “searching device” status

Hi toneyfeng,
If you are having Bluetooth issues after updating to iOS7, you may find the following article helpful:
iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
Regards,
- Brenden

Can I connect a wired device to access network?

I have an Airport Express set up as "Join a Wireless network" Can I connect a wired device to the ethernet port of my AE so that it can access the network?

The Ethernet port is normally enabled in the "Join" mode, if you have one of the newer 802.11n models of the AirPort Express.
If you have an older "b/g" version of the Express, the Ethernet port is not enabled in the "join" mode. Check the model number on the side of the Express. If you see A1084 or A1088, this is an older version of the Express.
Test your current Express to see if the port is already enabled by temporarily turning off the wireless on a laptop and connecting the laptop to the Express using an Ethernet cable. See if you can get an Internet connection. If you can, you know the Ethernet port is working.

My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets

My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets
The moment I disconnect the bluetooth , the phone turns normal again. This happens when i awaken the phone and try to access the home screen, this takes almost 4 to 5 seconds at times.
Is anyone facing similar issues, Please advice

My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets
The moment I disconnect the bluetooth , the phone turns normal again. This happens when i awaken the phone and try to access the home screen, this takes almost 4 to 5 seconds at times.
Is anyone facing similar issues, Please advice

I can't install any audio device on MacBook Pro 2012

I got a new MacBook Pro 2012 but I can't install any audio device, specially Native Instruments (Traktor)
is there an issue with Mount Lion?
Thank you

Troubleshoot with install logs
Mylenium

OS X Server 3 - Profile manager - I can't enroll any iOS devices

OS X Server 3 - Profile manager - I can't enroll any iOS devices
I have OS X Server setup on a Mac Mini and an Airport Extreme.
Airport is 10.0.1.1 and server is 10.0.1.3.
Server is setup to use DNS itself by server.mydomain.com
Airport is setup to use the server as DNS and the server then routes DNS queries onward to the internet.
Essentially anyone on my internal network thinks server.mydomain.com is the server itself. This is what I want.
From the outside, anyone searching for server.mydomain.com get's some page on a free hosting site with "Server is not accessible from the internet"
I also use a self-signed certificate to secure communications. It's valid.
Now this configuration has worked for the past two years. Out of curiosity in Server 3.1.1 I decided to give Profile manager a shot. Set it up, no worries.
Installed the Trust Profile first and then the Enroll profile. Done.
I can enroll and wipe, lock any mac in my firm remotely. Everything works, except iOS devices.
Any iOS device I try it fails at "Installing profile", I tried friend's phones, my own iPad... every iPad in my firm. It fails consistently at the same step, with no error code what so ever.
Is there a checklist I need to go through? Do I need some kind of weird certificate setup?
PS. Is it a problem if my devices are enrolled as development devices, thei UUID is in Apple's device list for beta software and iOS development?

The Problem is your DNS is being pushed locally to the iOS Device from your Airport Extreme and the DNS on your Airport extreme is undoubtedly a public form of DNS that does not recognize your private server's ip address or HQDN, in Airport Utility point the DNS at your server and let your Server provide the public DNS mapping and allow your Router to provide your Server's DNS. This should resolve your issue and allow you to enroll your iOS Devices by logging into the Profile Manager Web Portal from the iOS Device.

Can I connect two firewire devices?

Ideally, I need two firewire devices running at the same time: One camera to capture footage and one firewire external hard disk for the media files (about 160 GB).
a) I've been told that I need a firewire external disc, because a USB hard disk would slow down the editing in Final Cut. Is this true?
b) If so, can I connect two firewire devices to my MBP (74.53 GB internal hard disk), which has only one 400 Firewire port?

1. Yes, FireWire is faster than USB. However, it would be better to edit on your main hard drive. Use the external drive just for storage and backup.
2. You can chain up to 255 FireWire devices provided the total power requirements did not exceed the port's capabilities. A single FireWire drive and a camera shouldn't be a problem. However, you should know that some FireWire cameras may not play well with other FireWire devices. If you find apparent problems when both are connected to the port, then you may need to use each separately. In this case you may need to put the hard drive on a USB port while the camera is connected to the FireWire port unless the camera also supports transfers on USB 2.0.

Can't connect any BB10 device to my Mac

Similar Messages

Maybe you are looking for